Loading...
1#
2# PMBus chip drivers configuration
3#
4
5menuconfig PMBUS
6 tristate "PMBus support"
7 depends on I2C && EXPERIMENTAL
8 default n
9 help
10 Say yes here if you want to enable PMBus support.
11
12 This driver can also be built as a module. If so, the module will
13 be called pmbus_core.
14
15if PMBUS
16
17config SENSORS_PMBUS
18 tristate "Generic PMBus devices"
19 default y
20 help
21 If you say yes here you get hardware monitoring support for generic
22 PMBus devices, including but not limited to ADP4000, BMR450, BMR451,
23 BMR453, BMR454, LTC2978, NCP4200, and NCP4208.
24
25 This driver can also be built as a module. If so, the module will
26 be called pmbus.
27
28config SENSORS_ADM1275
29 tristate "Analog Devices ADM1275"
30 default n
31 help
32 If you say yes here you get hardware monitoring support for Analog
33 Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
34
35 This driver can also be built as a module. If so, the module will
36 be called adm1275.
37
38config SENSORS_LM25066
39 tristate "National Semiconductor LM25066 and compatibles"
40 default n
41 help
42 If you say yes here you get hardware monitoring support for National
43 Semiconductor LM25066, LM5064, and LM5066.
44
45 This driver can also be built as a module. If so, the module will
46 be called lm25066.
47
48config SENSORS_MAX16064
49 tristate "Maxim MAX16064"
50 default n
51 help
52 If you say yes here you get hardware monitoring support for Maxim
53 MAX16064.
54
55 This driver can also be built as a module. If so, the module will
56 be called max16064.
57
58config SENSORS_MAX34440
59 tristate "Maxim MAX34440/MAX34441"
60 default n
61 help
62 If you say yes here you get hardware monitoring support for Maxim
63 MAX34440 and MAX34441.
64
65 This driver can also be built as a module. If so, the module will
66 be called max34440.
67
68config SENSORS_MAX8688
69 tristate "Maxim MAX8688"
70 default n
71 help
72 If you say yes here you get hardware monitoring support for Maxim
73 MAX8688.
74
75 This driver can also be built as a module. If so, the module will
76 be called max8688.
77
78config SENSORS_UCD9000
79 tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
80 default n
81 help
82 If you say yes here you get hardware monitoring support for TI
83 UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
84 Controllers.
85
86 This driver can also be built as a module. If so, the module will
87 be called ucd9000.
88
89config SENSORS_UCD9200
90 tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
91 default n
92 help
93 If you say yes here you get hardware monitoring support for TI
94 UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
95 Digital PWM System Controllers.
96
97 This driver can also be built as a module. If so, the module will
98 be called ucd9200.
99
100endif # PMBUS
1#
2# PMBus chip drivers configuration
3#
4
5menuconfig PMBUS
6 tristate "PMBus support"
7 depends on I2C && EXPERIMENTAL
8 default n
9 help
10 Say yes here if you want to enable PMBus support.
11
12 This driver can also be built as a module. If so, the module will
13 be called pmbus_core.
14
15if PMBUS
16
17config SENSORS_PMBUS
18 tristate "Generic PMBus devices"
19 default y
20 help
21 If you say yes here you get hardware monitoring support for generic
22 PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
23 MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, TPS40400,
24 and TPS40422.
25
26 This driver can also be built as a module. If so, the module will
27 be called pmbus.
28
29config SENSORS_ADM1275
30 tristate "Analog Devices ADM1275 and compatibles"
31 default n
32 help
33 If you say yes here you get hardware monitoring support for Analog
34 Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
35 Power Monitors.
36
37 This driver can also be built as a module. If so, the module will
38 be called adm1275.
39
40config SENSORS_LM25066
41 tristate "National Semiconductor LM25066 and compatibles"
42 default n
43 help
44 If you say yes here you get hardware monitoring support for National
45 Semiconductor LM25066, LM5064, and LM5066.
46
47 This driver can also be built as a module. If so, the module will
48 be called lm25066.
49
50config SENSORS_LTC2978
51 tristate "Linear Technologies LTC2978 and LTC3880"
52 default n
53 help
54 If you say yes here you get hardware monitoring support for Linear
55 Technology LTC2978 and LTC3880.
56
57 This driver can also be built as a module. If so, the module will
58 be called ltc2978.
59
60config SENSORS_MAX16064
61 tristate "Maxim MAX16064"
62 default n
63 help
64 If you say yes here you get hardware monitoring support for Maxim
65 MAX16064.
66
67 This driver can also be built as a module. If so, the module will
68 be called max16064.
69
70config SENSORS_MAX34440
71 tristate "Maxim MAX34440 and compatibles"
72 default n
73 help
74 If you say yes here you get hardware monitoring support for Maxim
75 MAX34440, MAX34441, and MAX34446.
76
77 This driver can also be built as a module. If so, the module will
78 be called max34440.
79
80config SENSORS_MAX8688
81 tristate "Maxim MAX8688"
82 default n
83 help
84 If you say yes here you get hardware monitoring support for Maxim
85 MAX8688.
86
87 This driver can also be built as a module. If so, the module will
88 be called max8688.
89
90config SENSORS_UCD9000
91 tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
92 default n
93 help
94 If you say yes here you get hardware monitoring support for TI
95 UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
96 Controllers.
97
98 This driver can also be built as a module. If so, the module will
99 be called ucd9000.
100
101config SENSORS_UCD9200
102 tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
103 default n
104 help
105 If you say yes here you get hardware monitoring support for TI
106 UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
107 Digital PWM System Controllers.
108
109 This driver can also be built as a module. If so, the module will
110 be called ucd9200.
111
112config SENSORS_ZL6100
113 tristate "Intersil ZL6100 and compatibles"
114 default n
115 help
116 If you say yes here you get hardware monitoring support for Intersil
117 ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
118 ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
119 Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
120
121 This driver can also be built as a module. If so, the module will
122 be called zl6100.
123
124endif # PMBUS