Loading...
1/******************************************************************************
2 *
3 * Module Name: utids - support for device IDs - HID, UID, CID
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2011, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47
48#define _COMPONENT ACPI_UTILITIES
49ACPI_MODULE_NAME("utids")
50
51/*******************************************************************************
52 *
53 * FUNCTION: acpi_ut_execute_HID
54 *
55 * PARAMETERS: device_node - Node for the device
56 * return_id - Where the string HID is returned
57 *
58 * RETURN: Status
59 *
60 * DESCRIPTION: Executes the _HID control method that returns the hardware
61 * ID of the device. The HID is either an 32-bit encoded EISAID
62 * Integer or a String. A string is always returned. An EISAID
63 * is converted to a string.
64 *
65 * NOTE: Internal function, no parameter validation
66 *
67 ******************************************************************************/
68acpi_status
69acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
70 struct acpica_device_id **return_id)
71{
72 union acpi_operand_object *obj_desc;
73 struct acpica_device_id *hid;
74 u32 length;
75 acpi_status status;
76
77 ACPI_FUNCTION_TRACE(ut_execute_HID);
78
79 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
80 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
81 &obj_desc);
82 if (ACPI_FAILURE(status)) {
83 return_ACPI_STATUS(status);
84 }
85
86 /* Get the size of the String to be returned, includes null terminator */
87
88 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
89 length = ACPI_EISAID_STRING_SIZE;
90 } else {
91 length = obj_desc->string.length + 1;
92 }
93
94 /* Allocate a buffer for the HID */
95
96 hid =
97 ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
98 (acpi_size) length);
99 if (!hid) {
100 status = AE_NO_MEMORY;
101 goto cleanup;
102 }
103
104 /* Area for the string starts after DEVICE_ID struct */
105
106 hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
107
108 /* Convert EISAID to a string or simply copy existing string */
109
110 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
111 acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value);
112 } else {
113 ACPI_STRCPY(hid->string, obj_desc->string.pointer);
114 }
115
116 hid->length = length;
117 *return_id = hid;
118
119cleanup:
120
121 /* On exit, we must delete the return object */
122
123 acpi_ut_remove_reference(obj_desc);
124 return_ACPI_STATUS(status);
125}
126
127/*******************************************************************************
128 *
129 * FUNCTION: acpi_ut_execute_UID
130 *
131 * PARAMETERS: device_node - Node for the device
132 * return_id - Where the string UID is returned
133 *
134 * RETURN: Status
135 *
136 * DESCRIPTION: Executes the _UID control method that returns the unique
137 * ID of the device. The UID is either a 64-bit Integer (NOT an
138 * EISAID) or a string. Always returns a string. A 64-bit integer
139 * is converted to a decimal string.
140 *
141 * NOTE: Internal function, no parameter validation
142 *
143 ******************************************************************************/
144
145acpi_status
146acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
147 struct acpica_device_id **return_id)
148{
149 union acpi_operand_object *obj_desc;
150 struct acpica_device_id *uid;
151 u32 length;
152 acpi_status status;
153
154 ACPI_FUNCTION_TRACE(ut_execute_UID);
155
156 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
157 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
158 &obj_desc);
159 if (ACPI_FAILURE(status)) {
160 return_ACPI_STATUS(status);
161 }
162
163 /* Get the size of the String to be returned, includes null terminator */
164
165 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
166 length = ACPI_MAX64_DECIMAL_DIGITS + 1;
167 } else {
168 length = obj_desc->string.length + 1;
169 }
170
171 /* Allocate a buffer for the UID */
172
173 uid =
174 ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
175 (acpi_size) length);
176 if (!uid) {
177 status = AE_NO_MEMORY;
178 goto cleanup;
179 }
180
181 /* Area for the string starts after DEVICE_ID struct */
182
183 uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
184
185 /* Convert an Integer to string, or just copy an existing string */
186
187 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
188 acpi_ex_integer_to_string(uid->string, obj_desc->integer.value);
189 } else {
190 ACPI_STRCPY(uid->string, obj_desc->string.pointer);
191 }
192
193 uid->length = length;
194 *return_id = uid;
195
196cleanup:
197
198 /* On exit, we must delete the return object */
199
200 acpi_ut_remove_reference(obj_desc);
201 return_ACPI_STATUS(status);
202}
203
204/*******************************************************************************
205 *
206 * FUNCTION: acpi_ut_execute_CID
207 *
208 * PARAMETERS: device_node - Node for the device
209 * return_cid_list - Where the CID list is returned
210 *
211 * RETURN: Status, list of CID strings
212 *
213 * DESCRIPTION: Executes the _CID control method that returns one or more
214 * compatible hardware IDs for the device.
215 *
216 * NOTE: Internal function, no parameter validation
217 *
218 * A _CID method can return either a single compatible ID or a package of
219 * compatible IDs. Each compatible ID can be one of the following:
220 * 1) Integer (32 bit compressed EISA ID) or
221 * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
222 *
223 * The Integer CIDs are converted to string format by this function.
224 *
225 ******************************************************************************/
226
227acpi_status
228acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
229 struct acpica_device_id_list **return_cid_list)
230{
231 union acpi_operand_object **cid_objects;
232 union acpi_operand_object *obj_desc;
233 struct acpica_device_id_list *cid_list;
234 char *next_id_string;
235 u32 string_area_size;
236 u32 length;
237 u32 cid_list_size;
238 acpi_status status;
239 u32 count;
240 u32 i;
241
242 ACPI_FUNCTION_TRACE(ut_execute_CID);
243
244 /* Evaluate the _CID method for this device */
245
246 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
247 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
248 | ACPI_BTYPE_PACKAGE, &obj_desc);
249 if (ACPI_FAILURE(status)) {
250 return_ACPI_STATUS(status);
251 }
252
253 /*
254 * Get the count and size of the returned _CIDs. _CID can return either
255 * a Package of Integers/Strings or a single Integer or String.
256 * Note: This section also validates that all CID elements are of the
257 * correct type (Integer or String).
258 */
259 if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
260 count = obj_desc->package.count;
261 cid_objects = obj_desc->package.elements;
262 } else { /* Single Integer or String CID */
263
264 count = 1;
265 cid_objects = &obj_desc;
266 }
267
268 string_area_size = 0;
269 for (i = 0; i < count; i++) {
270
271 /* String lengths include null terminator */
272
273 switch (cid_objects[i]->common.type) {
274 case ACPI_TYPE_INTEGER:
275 string_area_size += ACPI_EISAID_STRING_SIZE;
276 break;
277
278 case ACPI_TYPE_STRING:
279 string_area_size += cid_objects[i]->string.length + 1;
280 break;
281
282 default:
283 status = AE_TYPE;
284 goto cleanup;
285 }
286 }
287
288 /*
289 * Now that we know the length of the CIDs, allocate return buffer:
290 * 1) Size of the base structure +
291 * 2) Size of the CID DEVICE_ID array +
292 * 3) Size of the actual CID strings
293 */
294 cid_list_size = sizeof(struct acpica_device_id_list) +
295 ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
296
297 cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
298 if (!cid_list) {
299 status = AE_NO_MEMORY;
300 goto cleanup;
301 }
302
303 /* Area for CID strings starts after the CID DEVICE_ID array */
304
305 next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
306 ((acpi_size) count * sizeof(struct acpica_device_id));
307
308 /* Copy/convert the CIDs to the return buffer */
309
310 for (i = 0; i < count; i++) {
311 if (cid_objects[i]->common.type == ACPI_TYPE_INTEGER) {
312
313 /* Convert the Integer (EISAID) CID to a string */
314
315 acpi_ex_eisa_id_to_string(next_id_string,
316 cid_objects[i]->integer.
317 value);
318 length = ACPI_EISAID_STRING_SIZE;
319 } else { /* ACPI_TYPE_STRING */
320
321 /* Copy the String CID from the returned object */
322
323 ACPI_STRCPY(next_id_string,
324 cid_objects[i]->string.pointer);
325 length = cid_objects[i]->string.length + 1;
326 }
327
328 cid_list->ids[i].string = next_id_string;
329 cid_list->ids[i].length = length;
330 next_id_string += length;
331 }
332
333 /* Finish the CID list */
334
335 cid_list->count = count;
336 cid_list->list_size = cid_list_size;
337 *return_cid_list = cid_list;
338
339cleanup:
340
341 /* On exit, we must delete the _CID return object */
342
343 acpi_ut_remove_reference(obj_desc);
344 return_ACPI_STATUS(status);
345}
1/******************************************************************************
2 *
3 * Module Name: utids - support for device IDs - HID, UID, CID
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2012, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#include <acpi/acpi.h>
45#include "accommon.h"
46#include "acinterp.h"
47
48#define _COMPONENT ACPI_UTILITIES
49ACPI_MODULE_NAME("utids")
50
51/*******************************************************************************
52 *
53 * FUNCTION: acpi_ut_execute_HID
54 *
55 * PARAMETERS: device_node - Node for the device
56 * return_id - Where the string HID is returned
57 *
58 * RETURN: Status
59 *
60 * DESCRIPTION: Executes the _HID control method that returns the hardware
61 * ID of the device. The HID is either an 32-bit encoded EISAID
62 * Integer or a String. A string is always returned. An EISAID
63 * is converted to a string.
64 *
65 * NOTE: Internal function, no parameter validation
66 *
67 ******************************************************************************/
68acpi_status
69acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
70 struct acpica_device_id **return_id)
71{
72 union acpi_operand_object *obj_desc;
73 struct acpica_device_id *hid;
74 u32 length;
75 acpi_status status;
76
77 ACPI_FUNCTION_TRACE(ut_execute_HID);
78
79 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
80 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
81 &obj_desc);
82 if (ACPI_FAILURE(status)) {
83 return_ACPI_STATUS(status);
84 }
85
86 /* Get the size of the String to be returned, includes null terminator */
87
88 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
89 length = ACPI_EISAID_STRING_SIZE;
90 } else {
91 length = obj_desc->string.length + 1;
92 }
93
94 /* Allocate a buffer for the HID */
95
96 hid =
97 ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
98 (acpi_size) length);
99 if (!hid) {
100 status = AE_NO_MEMORY;
101 goto cleanup;
102 }
103
104 /* Area for the string starts after DEVICE_ID struct */
105
106 hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
107
108 /* Convert EISAID to a string or simply copy existing string */
109
110 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
111 acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value);
112 } else {
113 ACPI_STRCPY(hid->string, obj_desc->string.pointer);
114 }
115
116 hid->length = length;
117 *return_id = hid;
118
119cleanup:
120
121 /* On exit, we must delete the return object */
122
123 acpi_ut_remove_reference(obj_desc);
124 return_ACPI_STATUS(status);
125}
126
127/*******************************************************************************
128 *
129 * FUNCTION: acpi_ut_execute_UID
130 *
131 * PARAMETERS: device_node - Node for the device
132 * return_id - Where the string UID is returned
133 *
134 * RETURN: Status
135 *
136 * DESCRIPTION: Executes the _UID control method that returns the unique
137 * ID of the device. The UID is either a 64-bit Integer (NOT an
138 * EISAID) or a string. Always returns a string. A 64-bit integer
139 * is converted to a decimal string.
140 *
141 * NOTE: Internal function, no parameter validation
142 *
143 ******************************************************************************/
144
145acpi_status
146acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
147 struct acpica_device_id **return_id)
148{
149 union acpi_operand_object *obj_desc;
150 struct acpica_device_id *uid;
151 u32 length;
152 acpi_status status;
153
154 ACPI_FUNCTION_TRACE(ut_execute_UID);
155
156 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
157 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
158 &obj_desc);
159 if (ACPI_FAILURE(status)) {
160 return_ACPI_STATUS(status);
161 }
162
163 /* Get the size of the String to be returned, includes null terminator */
164
165 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
166 length = ACPI_MAX64_DECIMAL_DIGITS + 1;
167 } else {
168 length = obj_desc->string.length + 1;
169 }
170
171 /* Allocate a buffer for the UID */
172
173 uid =
174 ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
175 (acpi_size) length);
176 if (!uid) {
177 status = AE_NO_MEMORY;
178 goto cleanup;
179 }
180
181 /* Area for the string starts after DEVICE_ID struct */
182
183 uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
184
185 /* Convert an Integer to string, or just copy an existing string */
186
187 if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
188 acpi_ex_integer_to_string(uid->string, obj_desc->integer.value);
189 } else {
190 ACPI_STRCPY(uid->string, obj_desc->string.pointer);
191 }
192
193 uid->length = length;
194 *return_id = uid;
195
196cleanup:
197
198 /* On exit, we must delete the return object */
199
200 acpi_ut_remove_reference(obj_desc);
201 return_ACPI_STATUS(status);
202}
203
204/*******************************************************************************
205 *
206 * FUNCTION: acpi_ut_execute_CID
207 *
208 * PARAMETERS: device_node - Node for the device
209 * return_cid_list - Where the CID list is returned
210 *
211 * RETURN: Status, list of CID strings
212 *
213 * DESCRIPTION: Executes the _CID control method that returns one or more
214 * compatible hardware IDs for the device.
215 *
216 * NOTE: Internal function, no parameter validation
217 *
218 * A _CID method can return either a single compatible ID or a package of
219 * compatible IDs. Each compatible ID can be one of the following:
220 * 1) Integer (32 bit compressed EISA ID) or
221 * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
222 *
223 * The Integer CIDs are converted to string format by this function.
224 *
225 ******************************************************************************/
226
227acpi_status
228acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
229 struct acpica_device_id_list **return_cid_list)
230{
231 union acpi_operand_object **cid_objects;
232 union acpi_operand_object *obj_desc;
233 struct acpica_device_id_list *cid_list;
234 char *next_id_string;
235 u32 string_area_size;
236 u32 length;
237 u32 cid_list_size;
238 acpi_status status;
239 u32 count;
240 u32 i;
241
242 ACPI_FUNCTION_TRACE(ut_execute_CID);
243
244 /* Evaluate the _CID method for this device */
245
246 status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
247 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
248 | ACPI_BTYPE_PACKAGE, &obj_desc);
249 if (ACPI_FAILURE(status)) {
250 return_ACPI_STATUS(status);
251 }
252
253 /*
254 * Get the count and size of the returned _CIDs. _CID can return either
255 * a Package of Integers/Strings or a single Integer or String.
256 * Note: This section also validates that all CID elements are of the
257 * correct type (Integer or String).
258 */
259 if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
260 count = obj_desc->package.count;
261 cid_objects = obj_desc->package.elements;
262 } else { /* Single Integer or String CID */
263
264 count = 1;
265 cid_objects = &obj_desc;
266 }
267
268 string_area_size = 0;
269 for (i = 0; i < count; i++) {
270
271 /* String lengths include null terminator */
272
273 switch (cid_objects[i]->common.type) {
274 case ACPI_TYPE_INTEGER:
275 string_area_size += ACPI_EISAID_STRING_SIZE;
276 break;
277
278 case ACPI_TYPE_STRING:
279 string_area_size += cid_objects[i]->string.length + 1;
280 break;
281
282 default:
283 status = AE_TYPE;
284 goto cleanup;
285 }
286 }
287
288 /*
289 * Now that we know the length of the CIDs, allocate return buffer:
290 * 1) Size of the base structure +
291 * 2) Size of the CID DEVICE_ID array +
292 * 3) Size of the actual CID strings
293 */
294 cid_list_size = sizeof(struct acpica_device_id_list) +
295 ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
296
297 cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
298 if (!cid_list) {
299 status = AE_NO_MEMORY;
300 goto cleanup;
301 }
302
303 /* Area for CID strings starts after the CID DEVICE_ID array */
304
305 next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
306 ((acpi_size) count * sizeof(struct acpica_device_id));
307
308 /* Copy/convert the CIDs to the return buffer */
309
310 for (i = 0; i < count; i++) {
311 if (cid_objects[i]->common.type == ACPI_TYPE_INTEGER) {
312
313 /* Convert the Integer (EISAID) CID to a string */
314
315 acpi_ex_eisa_id_to_string(next_id_string,
316 cid_objects[i]->integer.
317 value);
318 length = ACPI_EISAID_STRING_SIZE;
319 } else { /* ACPI_TYPE_STRING */
320
321 /* Copy the String CID from the returned object */
322
323 ACPI_STRCPY(next_id_string,
324 cid_objects[i]->string.pointer);
325 length = cid_objects[i]->string.length + 1;
326 }
327
328 cid_list->ids[i].string = next_id_string;
329 cid_list->ids[i].length = length;
330 next_id_string += length;
331 }
332
333 /* Finish the CID list */
334
335 cid_list->count = count;
336 cid_list->list_size = cid_list_size;
337 *return_cid_list = cid_list;
338
339cleanup:
340
341 /* On exit, we must delete the _CID return object */
342
343 acpi_ut_remove_reference(obj_desc);
344 return_ACPI_STATUS(status);
345}