Linux Audio

Check our new training course

Loading...
v3.1
  1/*******************************************************************************
  2 *
  3 * Module Name: rscalc - Calculate stream and list lengths
  4 *
  5 ******************************************************************************/
  6
  7/*
  8 * Copyright (C) 2000 - 2011, Intel Corp.
  9 * All rights reserved.
 10 *
 11 * Redistribution and use in source and binary forms, with or without
 12 * modification, are permitted provided that the following conditions
 13 * are met:
 14 * 1. Redistributions of source code must retain the above copyright
 15 *    notice, this list of conditions, and the following disclaimer,
 16 *    without modification.
 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 18 *    substantially similar to the "NO WARRANTY" disclaimer below
 19 *    ("Disclaimer") and any redistribution must be conditioned upon
 20 *    including a substantially similar Disclaimer requirement for further
 21 *    binary redistribution.
 22 * 3. Neither the names of the above-listed copyright holders nor the names
 23 *    of any contributors may be used to endorse or promote products derived
 24 *    from this software without specific prior written permission.
 25 *
 26 * Alternatively, this software may be distributed under the terms of the
 27 * GNU General Public License ("GPL") version 2 as published by the Free
 28 * Software Foundation.
 29 *
 30 * NO WARRANTY
 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 41 * POSSIBILITY OF SUCH DAMAGES.
 42 */
 43
 44#include <acpi/acpi.h>
 45#include "accommon.h"
 46#include "acresrc.h"
 47#include "acnamesp.h"
 48
 49#define _COMPONENT          ACPI_RESOURCES
 50ACPI_MODULE_NAME("rscalc")
 51
 52/* Local prototypes */
 53static u8 acpi_rs_count_set_bits(u16 bit_field);
 54
 55static acpi_rs_length
 56acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
 57
 58static u32
 59acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
 60
 61/*******************************************************************************
 62 *
 63 * FUNCTION:    acpi_rs_count_set_bits
 64 *
 65 * PARAMETERS:  bit_field       - Field in which to count bits
 66 *
 67 * RETURN:      Number of bits set within the field
 68 *
 69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
 70 *              (Short descriptor) interrupt and DMA lists.
 71 *
 72 ******************************************************************************/
 73
 74static u8 acpi_rs_count_set_bits(u16 bit_field)
 75{
 76	u8 bits_set;
 77
 78	ACPI_FUNCTION_ENTRY();
 79
 80	for (bits_set = 0; bit_field; bits_set++) {
 81
 82		/* Zero the least significant bit that is set */
 83
 84		bit_field &= (u16) (bit_field - 1);
 85	}
 86
 87	return bits_set;
 88}
 89
 90/*******************************************************************************
 91 *
 92 * FUNCTION:    acpi_rs_struct_option_length
 93 *
 94 * PARAMETERS:  resource_source     - Pointer to optional descriptor field
 95 *
 96 * RETURN:      Status
 97 *
 98 * DESCRIPTION: Common code to handle optional resource_source_index and
 99 *              resource_source fields in some Large descriptors. Used during
100 *              list-to-stream conversion
101 *
102 ******************************************************************************/
103
104static acpi_rs_length
105acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
106{
107	ACPI_FUNCTION_ENTRY();
108
109	/*
110	 * If the resource_source string is valid, return the size of the string
111	 * (string_length includes the NULL terminator) plus the size of the
112	 * resource_source_index (1).
113	 */
114	if (resource_source->string_ptr) {
115		return ((acpi_rs_length) (resource_source->string_length + 1));
116	}
117
118	return (0);
119}
120
121/*******************************************************************************
122 *
123 * FUNCTION:    acpi_rs_stream_option_length
124 *
125 * PARAMETERS:  resource_length     - Length from the resource header
126 *              minimum_total_length - Minimum length of this resource, before
127 *                                    any optional fields. Includes header size
128 *
129 * RETURN:      Length of optional string (0 if no string present)
130 *
131 * DESCRIPTION: Common code to handle optional resource_source_index and
132 *              resource_source fields in some Large descriptors. Used during
133 *              stream-to-list conversion
134 *
135 ******************************************************************************/
136
137static u32
138acpi_rs_stream_option_length(u32 resource_length,
139			     u32 minimum_aml_resource_length)
140{
141	u32 string_length = 0;
142
143	ACPI_FUNCTION_ENTRY();
144
145	/*
146	 * The resource_source_index and resource_source are optional elements of some
147	 * Large-type resource descriptors.
148	 */
149
150	/*
151	 * If the length of the actual resource descriptor is greater than the ACPI
152	 * spec-defined minimum length, it means that a resource_source_index exists
153	 * and is followed by a (required) null terminated string. The string length
154	 * (including the null terminator) is the resource length minus the minimum
155	 * length, minus one byte for the resource_source_index itself.
156	 */
157	if (resource_length > minimum_aml_resource_length) {
158
159		/* Compute the length of the optional string */
160
161		string_length =
162		    resource_length - minimum_aml_resource_length - 1;
163	}
164
165	/*
166	 * Round the length up to a multiple of the native word in order to
167	 * guarantee that the entire resource descriptor is native word aligned
168	 */
169	return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
170}
171
172/*******************************************************************************
173 *
174 * FUNCTION:    acpi_rs_get_aml_length
175 *
176 * PARAMETERS:  Resource            - Pointer to the resource linked list
177 *              size_needed         - Where the required size is returned
178 *
179 * RETURN:      Status
180 *
181 * DESCRIPTION: Takes a linked list of internal resource descriptors and
182 *              calculates the size buffer needed to hold the corresponding
183 *              external resource byte stream.
184 *
185 ******************************************************************************/
186
187acpi_status
188acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
189{
190	acpi_size aml_size_needed = 0;
191	acpi_rs_length total_size;
192
193	ACPI_FUNCTION_TRACE(rs_get_aml_length);
194
195	/* Traverse entire list of internal resource descriptors */
196
197	while (resource) {
198
199		/* Validate the descriptor type */
200
201		if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
202			return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
203		}
204
205		/* Get the base size of the (external stream) resource descriptor */
206
207		total_size = acpi_gbl_aml_resource_sizes[resource->type];
208
209		/*
210		 * Augment the base size for descriptors with optional and/or
211		 * variable-length fields
212		 */
213		switch (resource->type) {
214		case ACPI_RESOURCE_TYPE_IRQ:
215
216			/* Length can be 3 or 2 */
217
218			if (resource->data.irq.descriptor_length == 2) {
219				total_size--;
220			}
221			break;
222
223		case ACPI_RESOURCE_TYPE_START_DEPENDENT:
224
225			/* Length can be 1 or 0 */
226
227			if (resource->data.irq.descriptor_length == 0) {
228				total_size--;
229			}
230			break;
231
232		case ACPI_RESOURCE_TYPE_VENDOR:
233			/*
234			 * Vendor Defined Resource:
235			 * For a Vendor Specific resource, if the Length is between 1 and 7
236			 * it will be created as a Small Resource data type, otherwise it
237			 * is a Large Resource data type.
238			 */
239			if (resource->data.vendor.byte_length > 7) {
240
241				/* Base size of a Large resource descriptor */
242
243				total_size =
244				    sizeof(struct aml_resource_large_header);
245			}
246
247			/* Add the size of the vendor-specific data */
248
249			total_size = (acpi_rs_length)
250			    (total_size + resource->data.vendor.byte_length);
251			break;
252
253		case ACPI_RESOURCE_TYPE_END_TAG:
254			/*
255			 * End Tag:
256			 * We are done -- return the accumulated total size.
257			 */
258			*size_needed = aml_size_needed + total_size;
259
260			/* Normal exit */
261
262			return_ACPI_STATUS(AE_OK);
263
264		case ACPI_RESOURCE_TYPE_ADDRESS16:
265			/*
266			 * 16-Bit Address Resource:
267			 * Add the size of the optional resource_source info
268			 */
269			total_size = (acpi_rs_length)
270			    (total_size +
271			     acpi_rs_struct_option_length(&resource->data.
272							  address16.
273							  resource_source));
274			break;
275
276		case ACPI_RESOURCE_TYPE_ADDRESS32:
277			/*
278			 * 32-Bit Address Resource:
279			 * Add the size of the optional resource_source info
280			 */
281			total_size = (acpi_rs_length)
282			    (total_size +
283			     acpi_rs_struct_option_length(&resource->data.
284							  address32.
285							  resource_source));
286			break;
287
288		case ACPI_RESOURCE_TYPE_ADDRESS64:
289			/*
290			 * 64-Bit Address Resource:
291			 * Add the size of the optional resource_source info
292			 */
293			total_size = (acpi_rs_length)
294			    (total_size +
295			     acpi_rs_struct_option_length(&resource->data.
296							  address64.
297							  resource_source));
298			break;
299
300		case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
301			/*
302			 * Extended IRQ Resource:
303			 * Add the size of each additional optional interrupt beyond the
304			 * required 1 (4 bytes for each u32 interrupt number)
305			 */
306			total_size = (acpi_rs_length)
307			    (total_size +
308			     ((resource->data.extended_irq.interrupt_count -
309			       1) * 4) +
310			     /* Add the size of the optional resource_source info */
311			     acpi_rs_struct_option_length(&resource->data.
312							  extended_irq.
313							  resource_source));
314			break;
315
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
316		default:
317			break;
318		}
319
320		/* Update the total */
321
322		aml_size_needed += total_size;
323
324		/* Point to the next object */
325
326		resource =
327		    ACPI_ADD_PTR(struct acpi_resource, resource,
328				 resource->length);
329	}
330
331	/* Did not find an end_tag resource descriptor */
332
333	return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
334}
335
336/*******************************************************************************
337 *
338 * FUNCTION:    acpi_rs_get_list_length
339 *
340 * PARAMETERS:  aml_buffer          - Pointer to the resource byte stream
341 *              aml_buffer_length   - Size of aml_buffer
342 *              size_needed         - Where the size needed is returned
343 *
344 * RETURN:      Status
345 *
346 * DESCRIPTION: Takes an external resource byte stream and calculates the size
347 *              buffer needed to hold the corresponding internal resource
348 *              descriptor linked list.
349 *
350 ******************************************************************************/
351
352acpi_status
353acpi_rs_get_list_length(u8 * aml_buffer,
354			u32 aml_buffer_length, acpi_size * size_needed)
355{
356	acpi_status status;
357	u8 *end_aml;
358	u8 *buffer;
359	u32 buffer_size;
360	u16 temp16;
361	u16 resource_length;
362	u32 extra_struct_bytes;
363	u8 resource_index;
364	u8 minimum_aml_resource_length;
 
365
366	ACPI_FUNCTION_TRACE(rs_get_list_length);
367
368	*size_needed = 0;
369	end_aml = aml_buffer + aml_buffer_length;
370
371	/* Walk the list of AML resource descriptors */
372
373	while (aml_buffer < end_aml) {
374
375		/* Validate the Resource Type and Resource Length */
376
377		status = acpi_ut_validate_resource(aml_buffer, &resource_index);
378		if (ACPI_FAILURE(status)) {
 
 
 
 
379			return_ACPI_STATUS(status);
380		}
381
 
 
382		/* Get the resource length and base (minimum) AML size */
383
384		resource_length = acpi_ut_get_resource_length(aml_buffer);
385		minimum_aml_resource_length =
386		    acpi_gbl_resource_aml_sizes[resource_index];
387
388		/*
389		 * Augment the size for descriptors with optional
390		 * and/or variable length fields
391		 */
392		extra_struct_bytes = 0;
393		buffer =
394		    aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
395
396		switch (acpi_ut_get_resource_type(aml_buffer)) {
397		case ACPI_RESOURCE_NAME_IRQ:
398			/*
399			 * IRQ Resource:
400			 * Get the number of bits set in the 16-bit IRQ mask
401			 */
402			ACPI_MOVE_16_TO_16(&temp16, buffer);
403			extra_struct_bytes = acpi_rs_count_set_bits(temp16);
404			break;
405
406		case ACPI_RESOURCE_NAME_DMA:
407			/*
408			 * DMA Resource:
409			 * Get the number of bits set in the 8-bit DMA mask
410			 */
411			extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
412			break;
413
414		case ACPI_RESOURCE_NAME_VENDOR_SMALL:
415		case ACPI_RESOURCE_NAME_VENDOR_LARGE:
416			/*
417			 * Vendor Resource:
418			 * Get the number of vendor data bytes
419			 */
420			extra_struct_bytes = resource_length;
421			break;
422
423		case ACPI_RESOURCE_NAME_END_TAG:
424			/*
425			 * End Tag:
426			 * This is the normal exit, add size of end_tag
427			 */
428			*size_needed += ACPI_RS_SIZE_MIN;
429			return_ACPI_STATUS(AE_OK);
430
431		case ACPI_RESOURCE_NAME_ADDRESS32:
432		case ACPI_RESOURCE_NAME_ADDRESS16:
433		case ACPI_RESOURCE_NAME_ADDRESS64:
434			/*
435			 * Address Resource:
436			 * Add the size of the optional resource_source
437			 */
438			extra_struct_bytes =
439			    acpi_rs_stream_option_length(resource_length,
440							 minimum_aml_resource_length);
441			break;
442
443		case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
444			/*
445			 * Extended IRQ Resource:
446			 * Using the interrupt_table_length, add 4 bytes for each additional
447			 * interrupt. Note: at least one interrupt is required and is
448			 * included in the minimum descriptor size (reason for the -1)
449			 */
450			extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
451
452			/* Add the size of the optional resource_source */
453
454			extra_struct_bytes +=
455			    acpi_rs_stream_option_length(resource_length -
456							 extra_struct_bytes,
457							 minimum_aml_resource_length);
458			break;
459
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
460		default:
461			break;
462		}
463
464		/*
465		 * Update the required buffer size for the internal descriptor structs
466		 *
467		 * Important: Round the size up for the appropriate alignment. This
468		 * is a requirement on IA64.
469		 */
470		buffer_size = acpi_gbl_resource_struct_sizes[resource_index] +
471		    extra_struct_bytes;
472		buffer_size = (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
 
 
 
 
 
 
 
 
 
473
474		*size_needed += buffer_size;
475
476		ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
477				  "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
478				  acpi_ut_get_resource_type(aml_buffer),
479				  acpi_ut_get_descriptor_length(aml_buffer),
480				  buffer_size));
481
482		/*
483		 * Point to the next resource within the AML stream using the length
484		 * contained in the resource descriptor header
485		 */
486		aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
487	}
488
489	/* Did not find an end_tag resource descriptor */
490
491	return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
492}
493
494/*******************************************************************************
495 *
496 * FUNCTION:    acpi_rs_get_pci_routing_table_length
497 *
498 * PARAMETERS:  package_object          - Pointer to the package object
499 *              buffer_size_needed      - u32 pointer of the size buffer
500 *                                        needed to properly return the
501 *                                        parsed data
502 *
503 * RETURN:      Status
504 *
505 * DESCRIPTION: Given a package representing a PCI routing table, this
506 *              calculates the size of the corresponding linked list of
507 *              descriptions.
508 *
509 ******************************************************************************/
510
511acpi_status
512acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
513				     acpi_size * buffer_size_needed)
514{
515	u32 number_of_elements;
516	acpi_size temp_size_needed = 0;
517	union acpi_operand_object **top_object_list;
518	u32 index;
519	union acpi_operand_object *package_element;
520	union acpi_operand_object **sub_object_list;
521	u8 name_found;
522	u32 table_index;
523
524	ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
525
526	number_of_elements = package_object->package.count;
527
528	/*
529	 * Calculate the size of the return buffer.
530	 * The base size is the number of elements * the sizes of the
531	 * structures.  Additional space for the strings is added below.
532	 * The minus one is to subtract the size of the u8 Source[1]
533	 * member because it is added below.
534	 *
535	 * But each PRT_ENTRY structure has a pointer to a string and
536	 * the size of that string must be found.
537	 */
538	top_object_list = package_object->package.elements;
539
540	for (index = 0; index < number_of_elements; index++) {
541
542		/* Dereference the sub-package */
543
544		package_element = *top_object_list;
545
546		/* We must have a valid Package object */
547
548		if (!package_element ||
549		    (package_element->common.type != ACPI_TYPE_PACKAGE)) {
550			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
551		}
552
553		/*
554		 * The sub_object_list will now point to an array of the
555		 * four IRQ elements: Address, Pin, Source and source_index
556		 */
557		sub_object_list = package_element->package.elements;
558
559		/* Scan the irq_table_elements for the Source Name String */
560
561		name_found = FALSE;
562
563		for (table_index = 0; table_index < 4 && !name_found;
564		     table_index++) {
565			if (*sub_object_list &&	/* Null object allowed */
566			    ((ACPI_TYPE_STRING ==
567			      (*sub_object_list)->common.type) ||
568			     ((ACPI_TYPE_LOCAL_REFERENCE ==
569			       (*sub_object_list)->common.type) &&
570			      ((*sub_object_list)->reference.class ==
571			       ACPI_REFCLASS_NAME)))) {
572				name_found = TRUE;
573			} else {
574				/* Look at the next element */
575
576				sub_object_list++;
577			}
578		}
579
580		temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
581
582		/* Was a String type found? */
583
584		if (name_found) {
585			if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) {
586				/*
587				 * The length String.Length field does not include the
588				 * terminating NULL, add 1
589				 */
590				temp_size_needed += ((acpi_size)
591						     (*sub_object_list)->string.
592						     length + 1);
593			} else {
594				temp_size_needed +=
595				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
596			}
597		} else {
598			/*
599			 * If no name was found, then this is a NULL, which is
600			 * translated as a u32 zero.
601			 */
602			temp_size_needed += sizeof(u32);
603		}
604
605		/* Round up the size since each element must be aligned */
606
607		temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
608
609		/* Point to the next union acpi_operand_object */
610
611		top_object_list++;
612	}
613
614	/*
615	 * Add an extra element to the end of the list, essentially a
616	 * NULL terminator
617	 */
618	*buffer_size_needed =
619	    temp_size_needed + sizeof(struct acpi_pci_routing_table);
620	return_ACPI_STATUS(AE_OK);
621}
v3.5.6
  1/*******************************************************************************
  2 *
  3 * Module Name: rscalc - Calculate stream and list lengths
  4 *
  5 ******************************************************************************/
  6
  7/*
  8 * Copyright (C) 2000 - 2012, Intel Corp.
  9 * All rights reserved.
 10 *
 11 * Redistribution and use in source and binary forms, with or without
 12 * modification, are permitted provided that the following conditions
 13 * are met:
 14 * 1. Redistributions of source code must retain the above copyright
 15 *    notice, this list of conditions, and the following disclaimer,
 16 *    without modification.
 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 18 *    substantially similar to the "NO WARRANTY" disclaimer below
 19 *    ("Disclaimer") and any redistribution must be conditioned upon
 20 *    including a substantially similar Disclaimer requirement for further
 21 *    binary redistribution.
 22 * 3. Neither the names of the above-listed copyright holders nor the names
 23 *    of any contributors may be used to endorse or promote products derived
 24 *    from this software without specific prior written permission.
 25 *
 26 * Alternatively, this software may be distributed under the terms of the
 27 * GNU General Public License ("GPL") version 2 as published by the Free
 28 * Software Foundation.
 29 *
 30 * NO WARRANTY
 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 41 * POSSIBILITY OF SUCH DAMAGES.
 42 */
 43
 44#include <acpi/acpi.h>
 45#include "accommon.h"
 46#include "acresrc.h"
 47#include "acnamesp.h"
 48
 49#define _COMPONENT          ACPI_RESOURCES
 50ACPI_MODULE_NAME("rscalc")
 51
 52/* Local prototypes */
 53static u8 acpi_rs_count_set_bits(u16 bit_field);
 54
 55static acpi_rs_length
 56acpi_rs_struct_option_length(struct acpi_resource_source *resource_source);
 57
 58static u32
 59acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length);
 60
 61/*******************************************************************************
 62 *
 63 * FUNCTION:    acpi_rs_count_set_bits
 64 *
 65 * PARAMETERS:  bit_field       - Field in which to count bits
 66 *
 67 * RETURN:      Number of bits set within the field
 68 *
 69 * DESCRIPTION: Count the number of bits set in a resource field. Used for
 70 *              (Short descriptor) interrupt and DMA lists.
 71 *
 72 ******************************************************************************/
 73
 74static u8 acpi_rs_count_set_bits(u16 bit_field)
 75{
 76	u8 bits_set;
 77
 78	ACPI_FUNCTION_ENTRY();
 79
 80	for (bits_set = 0; bit_field; bits_set++) {
 81
 82		/* Zero the least significant bit that is set */
 83
 84		bit_field &= (u16) (bit_field - 1);
 85	}
 86
 87	return bits_set;
 88}
 89
 90/*******************************************************************************
 91 *
 92 * FUNCTION:    acpi_rs_struct_option_length
 93 *
 94 * PARAMETERS:  resource_source     - Pointer to optional descriptor field
 95 *
 96 * RETURN:      Status
 97 *
 98 * DESCRIPTION: Common code to handle optional resource_source_index and
 99 *              resource_source fields in some Large descriptors. Used during
100 *              list-to-stream conversion
101 *
102 ******************************************************************************/
103
104static acpi_rs_length
105acpi_rs_struct_option_length(struct acpi_resource_source *resource_source)
106{
107	ACPI_FUNCTION_ENTRY();
108
109	/*
110	 * If the resource_source string is valid, return the size of the string
111	 * (string_length includes the NULL terminator) plus the size of the
112	 * resource_source_index (1).
113	 */
114	if (resource_source->string_ptr) {
115		return ((acpi_rs_length) (resource_source->string_length + 1));
116	}
117
118	return (0);
119}
120
121/*******************************************************************************
122 *
123 * FUNCTION:    acpi_rs_stream_option_length
124 *
125 * PARAMETERS:  resource_length     - Length from the resource header
126 *              minimum_total_length - Minimum length of this resource, before
127 *                                    any optional fields. Includes header size
128 *
129 * RETURN:      Length of optional string (0 if no string present)
130 *
131 * DESCRIPTION: Common code to handle optional resource_source_index and
132 *              resource_source fields in some Large descriptors. Used during
133 *              stream-to-list conversion
134 *
135 ******************************************************************************/
136
137static u32
138acpi_rs_stream_option_length(u32 resource_length,
139			     u32 minimum_aml_resource_length)
140{
141	u32 string_length = 0;
142
143	ACPI_FUNCTION_ENTRY();
144
145	/*
146	 * The resource_source_index and resource_source are optional elements of some
147	 * Large-type resource descriptors.
148	 */
149
150	/*
151	 * If the length of the actual resource descriptor is greater than the ACPI
152	 * spec-defined minimum length, it means that a resource_source_index exists
153	 * and is followed by a (required) null terminated string. The string length
154	 * (including the null terminator) is the resource length minus the minimum
155	 * length, minus one byte for the resource_source_index itself.
156	 */
157	if (resource_length > minimum_aml_resource_length) {
158
159		/* Compute the length of the optional string */
160
161		string_length =
162		    resource_length - minimum_aml_resource_length - 1;
163	}
164
165	/*
166	 * Round the length up to a multiple of the native word in order to
167	 * guarantee that the entire resource descriptor is native word aligned
168	 */
169	return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length));
170}
171
172/*******************************************************************************
173 *
174 * FUNCTION:    acpi_rs_get_aml_length
175 *
176 * PARAMETERS:  Resource            - Pointer to the resource linked list
177 *              size_needed         - Where the required size is returned
178 *
179 * RETURN:      Status
180 *
181 * DESCRIPTION: Takes a linked list of internal resource descriptors and
182 *              calculates the size buffer needed to hold the corresponding
183 *              external resource byte stream.
184 *
185 ******************************************************************************/
186
187acpi_status
188acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
189{
190	acpi_size aml_size_needed = 0;
191	acpi_rs_length total_size;
192
193	ACPI_FUNCTION_TRACE(rs_get_aml_length);
194
195	/* Traverse entire list of internal resource descriptors */
196
197	while (resource) {
198
199		/* Validate the descriptor type */
200
201		if (resource->type > ACPI_RESOURCE_TYPE_MAX) {
202			return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
203		}
204
205		/* Get the base size of the (external stream) resource descriptor */
206
207		total_size = acpi_gbl_aml_resource_sizes[resource->type];
208
209		/*
210		 * Augment the base size for descriptors with optional and/or
211		 * variable-length fields
212		 */
213		switch (resource->type) {
214		case ACPI_RESOURCE_TYPE_IRQ:
215
216			/* Length can be 3 or 2 */
217
218			if (resource->data.irq.descriptor_length == 2) {
219				total_size--;
220			}
221			break;
222
223		case ACPI_RESOURCE_TYPE_START_DEPENDENT:
224
225			/* Length can be 1 or 0 */
226
227			if (resource->data.irq.descriptor_length == 0) {
228				total_size--;
229			}
230			break;
231
232		case ACPI_RESOURCE_TYPE_VENDOR:
233			/*
234			 * Vendor Defined Resource:
235			 * For a Vendor Specific resource, if the Length is between 1 and 7
236			 * it will be created as a Small Resource data type, otherwise it
237			 * is a Large Resource data type.
238			 */
239			if (resource->data.vendor.byte_length > 7) {
240
241				/* Base size of a Large resource descriptor */
242
243				total_size =
244				    sizeof(struct aml_resource_large_header);
245			}
246
247			/* Add the size of the vendor-specific data */
248
249			total_size = (acpi_rs_length)
250			    (total_size + resource->data.vendor.byte_length);
251			break;
252
253		case ACPI_RESOURCE_TYPE_END_TAG:
254			/*
255			 * End Tag:
256			 * We are done -- return the accumulated total size.
257			 */
258			*size_needed = aml_size_needed + total_size;
259
260			/* Normal exit */
261
262			return_ACPI_STATUS(AE_OK);
263
264		case ACPI_RESOURCE_TYPE_ADDRESS16:
265			/*
266			 * 16-Bit Address Resource:
267			 * Add the size of the optional resource_source info
268			 */
269			total_size = (acpi_rs_length)
270			    (total_size +
271			     acpi_rs_struct_option_length(&resource->data.
272							  address16.
273							  resource_source));
274			break;
275
276		case ACPI_RESOURCE_TYPE_ADDRESS32:
277			/*
278			 * 32-Bit Address Resource:
279			 * Add the size of the optional resource_source info
280			 */
281			total_size = (acpi_rs_length)
282			    (total_size +
283			     acpi_rs_struct_option_length(&resource->data.
284							  address32.
285							  resource_source));
286			break;
287
288		case ACPI_RESOURCE_TYPE_ADDRESS64:
289			/*
290			 * 64-Bit Address Resource:
291			 * Add the size of the optional resource_source info
292			 */
293			total_size = (acpi_rs_length)
294			    (total_size +
295			     acpi_rs_struct_option_length(&resource->data.
296							  address64.
297							  resource_source));
298			break;
299
300		case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
301			/*
302			 * Extended IRQ Resource:
303			 * Add the size of each additional optional interrupt beyond the
304			 * required 1 (4 bytes for each u32 interrupt number)
305			 */
306			total_size = (acpi_rs_length)
307			    (total_size +
308			     ((resource->data.extended_irq.interrupt_count -
309			       1) * 4) +
310			     /* Add the size of the optional resource_source info */
311			     acpi_rs_struct_option_length(&resource->data.
312							  extended_irq.
313							  resource_source));
314			break;
315
316		case ACPI_RESOURCE_TYPE_GPIO:
317
318			total_size =
319			    (acpi_rs_length) (total_size +
320					      (resource->data.gpio.
321					       pin_table_length * 2) +
322					      resource->data.gpio.
323					      resource_source.string_length +
324					      resource->data.gpio.
325					      vendor_length);
326
327			break;
328
329		case ACPI_RESOURCE_TYPE_SERIAL_BUS:
330
331			total_size =
332			    acpi_gbl_aml_resource_serial_bus_sizes[resource->
333								   data.
334								   common_serial_bus.
335								   type];
336
337			total_size = (acpi_rs_length) (total_size +
338						       resource->data.
339						       i2c_serial_bus.
340						       resource_source.
341						       string_length +
342						       resource->data.
343						       i2c_serial_bus.
344						       vendor_length);
345
346			break;
347
348		default:
349			break;
350		}
351
352		/* Update the total */
353
354		aml_size_needed += total_size;
355
356		/* Point to the next object */
357
358		resource =
359		    ACPI_ADD_PTR(struct acpi_resource, resource,
360				 resource->length);
361	}
362
363	/* Did not find an end_tag resource descriptor */
364
365	return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
366}
367
368/*******************************************************************************
369 *
370 * FUNCTION:    acpi_rs_get_list_length
371 *
372 * PARAMETERS:  aml_buffer          - Pointer to the resource byte stream
373 *              aml_buffer_length   - Size of aml_buffer
374 *              size_needed         - Where the size needed is returned
375 *
376 * RETURN:      Status
377 *
378 * DESCRIPTION: Takes an external resource byte stream and calculates the size
379 *              buffer needed to hold the corresponding internal resource
380 *              descriptor linked list.
381 *
382 ******************************************************************************/
383
384acpi_status
385acpi_rs_get_list_length(u8 * aml_buffer,
386			u32 aml_buffer_length, acpi_size * size_needed)
387{
388	acpi_status status;
389	u8 *end_aml;
390	u8 *buffer;
391	u32 buffer_size;
392	u16 temp16;
393	u16 resource_length;
394	u32 extra_struct_bytes;
395	u8 resource_index;
396	u8 minimum_aml_resource_length;
397	union aml_resource *aml_resource;
398
399	ACPI_FUNCTION_TRACE(rs_get_list_length);
400
401	*size_needed = ACPI_RS_SIZE_MIN;	/* Minimum size is one end_tag */
402	end_aml = aml_buffer + aml_buffer_length;
403
404	/* Walk the list of AML resource descriptors */
405
406	while (aml_buffer < end_aml) {
407
408		/* Validate the Resource Type and Resource Length */
409
410		status = acpi_ut_validate_resource(aml_buffer, &resource_index);
411		if (ACPI_FAILURE(status)) {
412			/*
413			 * Exit on failure. Cannot continue because the descriptor length
414			 * may be bogus also.
415			 */
416			return_ACPI_STATUS(status);
417		}
418
419		aml_resource = (void *)aml_buffer;
420
421		/* Get the resource length and base (minimum) AML size */
422
423		resource_length = acpi_ut_get_resource_length(aml_buffer);
424		minimum_aml_resource_length =
425		    acpi_gbl_resource_aml_sizes[resource_index];
426
427		/*
428		 * Augment the size for descriptors with optional
429		 * and/or variable length fields
430		 */
431		extra_struct_bytes = 0;
432		buffer =
433		    aml_buffer + acpi_ut_get_resource_header_length(aml_buffer);
434
435		switch (acpi_ut_get_resource_type(aml_buffer)) {
436		case ACPI_RESOURCE_NAME_IRQ:
437			/*
438			 * IRQ Resource:
439			 * Get the number of bits set in the 16-bit IRQ mask
440			 */
441			ACPI_MOVE_16_TO_16(&temp16, buffer);
442			extra_struct_bytes = acpi_rs_count_set_bits(temp16);
443			break;
444
445		case ACPI_RESOURCE_NAME_DMA:
446			/*
447			 * DMA Resource:
448			 * Get the number of bits set in the 8-bit DMA mask
449			 */
450			extra_struct_bytes = acpi_rs_count_set_bits(*buffer);
451			break;
452
453		case ACPI_RESOURCE_NAME_VENDOR_SMALL:
454		case ACPI_RESOURCE_NAME_VENDOR_LARGE:
455			/*
456			 * Vendor Resource:
457			 * Get the number of vendor data bytes
458			 */
459			extra_struct_bytes = resource_length;
460			break;
461
462		case ACPI_RESOURCE_NAME_END_TAG:
463			/*
464			 * End Tag: This is the normal exit
 
465			 */
 
466			return_ACPI_STATUS(AE_OK);
467
468		case ACPI_RESOURCE_NAME_ADDRESS32:
469		case ACPI_RESOURCE_NAME_ADDRESS16:
470		case ACPI_RESOURCE_NAME_ADDRESS64:
471			/*
472			 * Address Resource:
473			 * Add the size of the optional resource_source
474			 */
475			extra_struct_bytes =
476			    acpi_rs_stream_option_length(resource_length,
477							 minimum_aml_resource_length);
478			break;
479
480		case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
481			/*
482			 * Extended IRQ Resource:
483			 * Using the interrupt_table_length, add 4 bytes for each additional
484			 * interrupt. Note: at least one interrupt is required and is
485			 * included in the minimum descriptor size (reason for the -1)
486			 */
487			extra_struct_bytes = (buffer[1] - 1) * sizeof(u32);
488
489			/* Add the size of the optional resource_source */
490
491			extra_struct_bytes +=
492			    acpi_rs_stream_option_length(resource_length -
493							 extra_struct_bytes,
494							 minimum_aml_resource_length);
495			break;
496
497		case ACPI_RESOURCE_NAME_GPIO:
498
499			/* Vendor data is optional */
500
501			if (aml_resource->gpio.vendor_length) {
502				extra_struct_bytes +=
503				    aml_resource->gpio.vendor_offset -
504				    aml_resource->gpio.pin_table_offset +
505				    aml_resource->gpio.vendor_length;
506			} else {
507				extra_struct_bytes +=
508				    aml_resource->large_header.resource_length +
509				    sizeof(struct aml_resource_large_header) -
510				    aml_resource->gpio.pin_table_offset;
511			}
512			break;
513
514		case ACPI_RESOURCE_NAME_SERIAL_BUS:
515
516			minimum_aml_resource_length =
517			    acpi_gbl_resource_aml_serial_bus_sizes
518			    [aml_resource->common_serial_bus.type];
519			extra_struct_bytes +=
520			    aml_resource->common_serial_bus.resource_length -
521			    minimum_aml_resource_length;
522			break;
523
524		default:
525			break;
526		}
527
528		/*
529		 * Update the required buffer size for the internal descriptor structs
530		 *
531		 * Important: Round the size up for the appropriate alignment. This
532		 * is a requirement on IA64.
533		 */
534		if (acpi_ut_get_resource_type(aml_buffer) ==
535		    ACPI_RESOURCE_NAME_SERIAL_BUS) {
536			buffer_size =
537			    acpi_gbl_resource_struct_serial_bus_sizes
538			    [aml_resource->common_serial_bus.type] +
539			    extra_struct_bytes;
540		} else {
541			buffer_size =
542			    acpi_gbl_resource_struct_sizes[resource_index] +
543			    extra_struct_bytes;
544		}
545		buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size);
546
547		*size_needed += buffer_size;
548
549		ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES,
550				  "Type %.2X, AmlLength %.2X InternalLength %.2X\n",
551				  acpi_ut_get_resource_type(aml_buffer),
552				  acpi_ut_get_descriptor_length(aml_buffer),
553				  buffer_size));
554
555		/*
556		 * Point to the next resource within the AML stream using the length
557		 * contained in the resource descriptor header
558		 */
559		aml_buffer += acpi_ut_get_descriptor_length(aml_buffer);
560	}
561
562	/* Did not find an end_tag resource descriptor */
563
564	return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
565}
566
567/*******************************************************************************
568 *
569 * FUNCTION:    acpi_rs_get_pci_routing_table_length
570 *
571 * PARAMETERS:  package_object          - Pointer to the package object
572 *              buffer_size_needed      - u32 pointer of the size buffer
573 *                                        needed to properly return the
574 *                                        parsed data
575 *
576 * RETURN:      Status
577 *
578 * DESCRIPTION: Given a package representing a PCI routing table, this
579 *              calculates the size of the corresponding linked list of
580 *              descriptions.
581 *
582 ******************************************************************************/
583
584acpi_status
585acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
586				     acpi_size * buffer_size_needed)
587{
588	u32 number_of_elements;
589	acpi_size temp_size_needed = 0;
590	union acpi_operand_object **top_object_list;
591	u32 index;
592	union acpi_operand_object *package_element;
593	union acpi_operand_object **sub_object_list;
594	u8 name_found;
595	u32 table_index;
596
597	ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length);
598
599	number_of_elements = package_object->package.count;
600
601	/*
602	 * Calculate the size of the return buffer.
603	 * The base size is the number of elements * the sizes of the
604	 * structures.  Additional space for the strings is added below.
605	 * The minus one is to subtract the size of the u8 Source[1]
606	 * member because it is added below.
607	 *
608	 * But each PRT_ENTRY structure has a pointer to a string and
609	 * the size of that string must be found.
610	 */
611	top_object_list = package_object->package.elements;
612
613	for (index = 0; index < number_of_elements; index++) {
614
615		/* Dereference the sub-package */
616
617		package_element = *top_object_list;
618
619		/* We must have a valid Package object */
620
621		if (!package_element ||
622		    (package_element->common.type != ACPI_TYPE_PACKAGE)) {
623			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
624		}
625
626		/*
627		 * The sub_object_list will now point to an array of the
628		 * four IRQ elements: Address, Pin, Source and source_index
629		 */
630		sub_object_list = package_element->package.elements;
631
632		/* Scan the irq_table_elements for the Source Name String */
633
634		name_found = FALSE;
635
636		for (table_index = 0; table_index < 4 && !name_found;
637		     table_index++) {
638			if (*sub_object_list &&	/* Null object allowed */
639			    ((ACPI_TYPE_STRING ==
640			      (*sub_object_list)->common.type) ||
641			     ((ACPI_TYPE_LOCAL_REFERENCE ==
642			       (*sub_object_list)->common.type) &&
643			      ((*sub_object_list)->reference.class ==
644			       ACPI_REFCLASS_NAME)))) {
645				name_found = TRUE;
646			} else {
647				/* Look at the next element */
648
649				sub_object_list++;
650			}
651		}
652
653		temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4);
654
655		/* Was a String type found? */
656
657		if (name_found) {
658			if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) {
659				/*
660				 * The length String.Length field does not include the
661				 * terminating NULL, add 1
662				 */
663				temp_size_needed += ((acpi_size)
664						     (*sub_object_list)->string.
665						     length + 1);
666			} else {
667				temp_size_needed +=
668				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
669			}
670		} else {
671			/*
672			 * If no name was found, then this is a NULL, which is
673			 * translated as a u32 zero.
674			 */
675			temp_size_needed += sizeof(u32);
676		}
677
678		/* Round up the size since each element must be aligned */
679
680		temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed);
681
682		/* Point to the next union acpi_operand_object */
683
684		top_object_list++;
685	}
686
687	/*
688	 * Add an extra element to the end of the list, essentially a
689	 * NULL terminator
690	 */
691	*buffer_size_needed =
692	    temp_size_needed + sizeof(struct acpi_pci_routing_table);
693	return_ACPI_STATUS(AE_OK);
694}