Loading...
1
2/******************************************************************************
3 *
4 * Module Name: exutils - interpreter/scanner utilities
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2011, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45/*
46 * DEFINE_AML_GLOBALS is tested in amlcode.h
47 * to determine whether certain global names should be "defined" or only
48 * "declared" in the current compilation. This enhances maintainability
49 * by enabling a single header file to embody all knowledge of the names
50 * in question.
51 *
52 * Exactly one module of any executable should #define DEFINE_GLOBALS
53 * before #including the header files which use this convention. The
54 * names in question will be defined and initialized in that module,
55 * and declared as extern in all other modules which #include those
56 * header files.
57 */
58
59#define DEFINE_AML_GLOBALS
60
61#include <acpi/acpi.h>
62#include "accommon.h"
63#include "acinterp.h"
64#include "amlcode.h"
65
66#define _COMPONENT ACPI_EXECUTER
67ACPI_MODULE_NAME("exutils")
68
69/* Local prototypes */
70static u32 acpi_ex_digits_needed(u64 value, u32 base);
71
72#ifndef ACPI_NO_METHOD_EXECUTION
73/*******************************************************************************
74 *
75 * FUNCTION: acpi_ex_enter_interpreter
76 *
77 * PARAMETERS: None
78 *
79 * RETURN: None
80 *
81 * DESCRIPTION: Enter the interpreter execution region. Failure to enter
82 * the interpreter region is a fatal system error. Used in
83 * conjunction with exit_interpreter.
84 *
85 ******************************************************************************/
86
87void acpi_ex_enter_interpreter(void)
88{
89 acpi_status status;
90
91 ACPI_FUNCTION_TRACE(ex_enter_interpreter);
92
93 status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
94 if (ACPI_FAILURE(status)) {
95 ACPI_ERROR((AE_INFO,
96 "Could not acquire AML Interpreter mutex"));
97 }
98
99 return_VOID;
100}
101
102/*******************************************************************************
103 *
104 * FUNCTION: acpi_ex_reacquire_interpreter
105 *
106 * PARAMETERS: None
107 *
108 * RETURN: None
109 *
110 * DESCRIPTION: Reacquire the interpreter execution region from within the
111 * interpreter code. Failure to enter the interpreter region is a
112 * fatal system error. Used in conjunction with
113 * relinquish_interpreter
114 *
115 ******************************************************************************/
116
117void acpi_ex_reacquire_interpreter(void)
118{
119 ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
120
121 /*
122 * If the global serialized flag is set, do not release the interpreter,
123 * since it was not actually released by acpi_ex_relinquish_interpreter.
124 * This forces the interpreter to be single threaded.
125 */
126 if (!acpi_gbl_all_methods_serialized) {
127 acpi_ex_enter_interpreter();
128 }
129
130 return_VOID;
131}
132
133/*******************************************************************************
134 *
135 * FUNCTION: acpi_ex_exit_interpreter
136 *
137 * PARAMETERS: None
138 *
139 * RETURN: None
140 *
141 * DESCRIPTION: Exit the interpreter execution region. This is the top level
142 * routine used to exit the interpreter when all processing has
143 * been completed.
144 *
145 ******************************************************************************/
146
147void acpi_ex_exit_interpreter(void)
148{
149 acpi_status status;
150
151 ACPI_FUNCTION_TRACE(ex_exit_interpreter);
152
153 status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
154 if (ACPI_FAILURE(status)) {
155 ACPI_ERROR((AE_INFO,
156 "Could not release AML Interpreter mutex"));
157 }
158
159 return_VOID;
160}
161
162/*******************************************************************************
163 *
164 * FUNCTION: acpi_ex_relinquish_interpreter
165 *
166 * PARAMETERS: None
167 *
168 * RETURN: None
169 *
170 * DESCRIPTION: Exit the interpreter execution region, from within the
171 * interpreter - before attempting an operation that will possibly
172 * block the running thread.
173 *
174 * Cases where the interpreter is unlocked internally
175 * 1) Method to be blocked on a Sleep() AML opcode
176 * 2) Method to be blocked on an Acquire() AML opcode
177 * 3) Method to be blocked on a Wait() AML opcode
178 * 4) Method to be blocked to acquire the global lock
179 * 5) Method to be blocked waiting to execute a serialized control method
180 * that is currently executing
181 * 6) About to invoke a user-installed opregion handler
182 *
183 ******************************************************************************/
184
185void acpi_ex_relinquish_interpreter(void)
186{
187 ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
188
189 /*
190 * If the global serialized flag is set, do not release the interpreter.
191 * This forces the interpreter to be single threaded.
192 */
193 if (!acpi_gbl_all_methods_serialized) {
194 acpi_ex_exit_interpreter();
195 }
196
197 return_VOID;
198}
199
200/*******************************************************************************
201 *
202 * FUNCTION: acpi_ex_truncate_for32bit_table
203 *
204 * PARAMETERS: obj_desc - Object to be truncated
205 *
206 * RETURN: none
207 *
208 * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
209 * 32-bit, as determined by the revision of the DSDT.
210 *
211 ******************************************************************************/
212
213void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc)
214{
215
216 ACPI_FUNCTION_ENTRY();
217
218 /*
219 * Object must be a valid number and we must be executing
220 * a control method. NS node could be there for AML_INT_NAMEPATH_OP.
221 */
222 if ((!obj_desc) ||
223 (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) ||
224 (obj_desc->common.type != ACPI_TYPE_INTEGER)) {
225 return;
226 }
227
228 if (acpi_gbl_integer_byte_width == 4) {
229 /*
230 * We are running a method that exists in a 32-bit ACPI table.
231 * Truncate the value to 32 bits by zeroing out the upper 32-bit field
232 */
233 obj_desc->integer.value &= (u64) ACPI_UINT32_MAX;
234 }
235}
236
237/*******************************************************************************
238 *
239 * FUNCTION: acpi_ex_acquire_global_lock
240 *
241 * PARAMETERS: field_flags - Flags with Lock rule:
242 * always_lock or never_lock
243 *
244 * RETURN: None
245 *
246 * DESCRIPTION: Obtain the ACPI hardware Global Lock, only if the field
247 * flags specifiy that it is to be obtained before field access.
248 *
249 ******************************************************************************/
250
251void acpi_ex_acquire_global_lock(u32 field_flags)
252{
253 acpi_status status;
254
255 ACPI_FUNCTION_TRACE(ex_acquire_global_lock);
256
257 /* Only use the lock if the always_lock bit is set */
258
259 if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
260 return_VOID;
261 }
262
263 /* Attempt to get the global lock, wait forever */
264
265 status = acpi_ex_acquire_mutex_object(ACPI_WAIT_FOREVER,
266 acpi_gbl_global_lock_mutex,
267 acpi_os_get_thread_id());
268
269 if (ACPI_FAILURE(status)) {
270 ACPI_EXCEPTION((AE_INFO, status,
271 "Could not acquire Global Lock"));
272 }
273
274 return_VOID;
275}
276
277/*******************************************************************************
278 *
279 * FUNCTION: acpi_ex_release_global_lock
280 *
281 * PARAMETERS: field_flags - Flags with Lock rule:
282 * always_lock or never_lock
283 *
284 * RETURN: None
285 *
286 * DESCRIPTION: Release the ACPI hardware Global Lock
287 *
288 ******************************************************************************/
289
290void acpi_ex_release_global_lock(u32 field_flags)
291{
292 acpi_status status;
293
294 ACPI_FUNCTION_TRACE(ex_release_global_lock);
295
296 /* Only use the lock if the always_lock bit is set */
297
298 if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
299 return_VOID;
300 }
301
302 /* Release the global lock */
303
304 status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex);
305 if (ACPI_FAILURE(status)) {
306
307 /* Report the error, but there isn't much else we can do */
308
309 ACPI_EXCEPTION((AE_INFO, status,
310 "Could not release Global Lock"));
311 }
312
313 return_VOID;
314}
315
316/*******************************************************************************
317 *
318 * FUNCTION: acpi_ex_digits_needed
319 *
320 * PARAMETERS: Value - Value to be represented
321 * Base - Base of representation
322 *
323 * RETURN: The number of digits.
324 *
325 * DESCRIPTION: Calculate the number of digits needed to represent the Value
326 * in the given Base (Radix)
327 *
328 ******************************************************************************/
329
330static u32 acpi_ex_digits_needed(u64 value, u32 base)
331{
332 u32 num_digits;
333 u64 current_value;
334
335 ACPI_FUNCTION_TRACE(ex_digits_needed);
336
337 /* u64 is unsigned, so we don't worry about a '-' prefix */
338
339 if (value == 0) {
340 return_UINT32(1);
341 }
342
343 current_value = value;
344 num_digits = 0;
345
346 /* Count the digits in the requested base */
347
348 while (current_value) {
349 (void)acpi_ut_short_divide(current_value, base, ¤t_value,
350 NULL);
351 num_digits++;
352 }
353
354 return_UINT32(num_digits);
355}
356
357/*******************************************************************************
358 *
359 * FUNCTION: acpi_ex_eisa_id_to_string
360 *
361 * PARAMETERS: compressed_id - EISAID to be converted
362 * out_string - Where to put the converted string (8 bytes)
363 *
364 * RETURN: None
365 *
366 * DESCRIPTION: Convert a numeric EISAID to string representation. Return
367 * buffer must be large enough to hold the string. The string
368 * returned is always exactly of length ACPI_EISAID_STRING_SIZE
369 * (includes null terminator). The EISAID is always 32 bits.
370 *
371 ******************************************************************************/
372
373void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id)
374{
375 u32 swapped_id;
376
377 ACPI_FUNCTION_ENTRY();
378
379 /* The EISAID should be a 32-bit integer */
380
381 if (compressed_id > ACPI_UINT32_MAX) {
382 ACPI_WARNING((AE_INFO,
383 "Expected EISAID is larger than 32 bits: 0x%8.8X%8.8X, truncating",
384 ACPI_FORMAT_UINT64(compressed_id)));
385 }
386
387 /* Swap ID to big-endian to get contiguous bits */
388
389 swapped_id = acpi_ut_dword_byte_swap((u32)compressed_id);
390
391 /* First 3 bytes are uppercase letters. Next 4 bytes are hexadecimal */
392
393 out_string[0] =
394 (char)(0x40 + (((unsigned long)swapped_id >> 26) & 0x1F));
395 out_string[1] = (char)(0x40 + ((swapped_id >> 21) & 0x1F));
396 out_string[2] = (char)(0x40 + ((swapped_id >> 16) & 0x1F));
397 out_string[3] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 12);
398 out_string[4] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 8);
399 out_string[5] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 4);
400 out_string[6] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 0);
401 out_string[7] = 0;
402}
403
404/*******************************************************************************
405 *
406 * FUNCTION: acpi_ex_integer_to_string
407 *
408 * PARAMETERS: out_string - Where to put the converted string. At least
409 * 21 bytes are needed to hold the largest
410 * possible 64-bit integer.
411 * Value - Value to be converted
412 *
413 * RETURN: None, string
414 *
415 * DESCRIPTION: Convert a 64-bit integer to decimal string representation.
416 * Assumes string buffer is large enough to hold the string. The
417 * largest string is (ACPI_MAX64_DECIMAL_DIGITS + 1).
418 *
419 ******************************************************************************/
420
421void acpi_ex_integer_to_string(char *out_string, u64 value)
422{
423 u32 count;
424 u32 digits_needed;
425 u32 remainder;
426
427 ACPI_FUNCTION_ENTRY();
428
429 digits_needed = acpi_ex_digits_needed(value, 10);
430 out_string[digits_needed] = 0;
431
432 for (count = digits_needed; count > 0; count--) {
433 (void)acpi_ut_short_divide(value, 10, &value, &remainder);
434 out_string[count - 1] = (char)('0' + remainder);
435 }
436}
437
438#endif
1
2/******************************************************************************
3 *
4 * Module Name: exutils - interpreter/scanner utilities
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2012, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45/*
46 * DEFINE_AML_GLOBALS is tested in amlcode.h
47 * to determine whether certain global names should be "defined" or only
48 * "declared" in the current compilation. This enhances maintainability
49 * by enabling a single header file to embody all knowledge of the names
50 * in question.
51 *
52 * Exactly one module of any executable should #define DEFINE_GLOBALS
53 * before #including the header files which use this convention. The
54 * names in question will be defined and initialized in that module,
55 * and declared as extern in all other modules which #include those
56 * header files.
57 */
58
59#define DEFINE_AML_GLOBALS
60
61#include <acpi/acpi.h>
62#include "accommon.h"
63#include "acinterp.h"
64#include "amlcode.h"
65
66#define _COMPONENT ACPI_EXECUTER
67ACPI_MODULE_NAME("exutils")
68
69/* Local prototypes */
70static u32 acpi_ex_digits_needed(u64 value, u32 base);
71
72#ifndef ACPI_NO_METHOD_EXECUTION
73/*******************************************************************************
74 *
75 * FUNCTION: acpi_ex_enter_interpreter
76 *
77 * PARAMETERS: None
78 *
79 * RETURN: None
80 *
81 * DESCRIPTION: Enter the interpreter execution region. Failure to enter
82 * the interpreter region is a fatal system error. Used in
83 * conjunction with exit_interpreter.
84 *
85 ******************************************************************************/
86
87void acpi_ex_enter_interpreter(void)
88{
89 acpi_status status;
90
91 ACPI_FUNCTION_TRACE(ex_enter_interpreter);
92
93 status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
94 if (ACPI_FAILURE(status)) {
95 ACPI_ERROR((AE_INFO,
96 "Could not acquire AML Interpreter mutex"));
97 }
98
99 return_VOID;
100}
101
102/*******************************************************************************
103 *
104 * FUNCTION: acpi_ex_reacquire_interpreter
105 *
106 * PARAMETERS: None
107 *
108 * RETURN: None
109 *
110 * DESCRIPTION: Reacquire the interpreter execution region from within the
111 * interpreter code. Failure to enter the interpreter region is a
112 * fatal system error. Used in conjunction with
113 * relinquish_interpreter
114 *
115 ******************************************************************************/
116
117void acpi_ex_reacquire_interpreter(void)
118{
119 ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
120
121 /*
122 * If the global serialized flag is set, do not release the interpreter,
123 * since it was not actually released by acpi_ex_relinquish_interpreter.
124 * This forces the interpreter to be single threaded.
125 */
126 if (!acpi_gbl_all_methods_serialized) {
127 acpi_ex_enter_interpreter();
128 }
129
130 return_VOID;
131}
132
133/*******************************************************************************
134 *
135 * FUNCTION: acpi_ex_exit_interpreter
136 *
137 * PARAMETERS: None
138 *
139 * RETURN: None
140 *
141 * DESCRIPTION: Exit the interpreter execution region. This is the top level
142 * routine used to exit the interpreter when all processing has
143 * been completed.
144 *
145 ******************************************************************************/
146
147void acpi_ex_exit_interpreter(void)
148{
149 acpi_status status;
150
151 ACPI_FUNCTION_TRACE(ex_exit_interpreter);
152
153 status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
154 if (ACPI_FAILURE(status)) {
155 ACPI_ERROR((AE_INFO,
156 "Could not release AML Interpreter mutex"));
157 }
158
159 return_VOID;
160}
161
162/*******************************************************************************
163 *
164 * FUNCTION: acpi_ex_relinquish_interpreter
165 *
166 * PARAMETERS: None
167 *
168 * RETURN: None
169 *
170 * DESCRIPTION: Exit the interpreter execution region, from within the
171 * interpreter - before attempting an operation that will possibly
172 * block the running thread.
173 *
174 * Cases where the interpreter is unlocked internally
175 * 1) Method to be blocked on a Sleep() AML opcode
176 * 2) Method to be blocked on an Acquire() AML opcode
177 * 3) Method to be blocked on a Wait() AML opcode
178 * 4) Method to be blocked to acquire the global lock
179 * 5) Method to be blocked waiting to execute a serialized control method
180 * that is currently executing
181 * 6) About to invoke a user-installed opregion handler
182 *
183 ******************************************************************************/
184
185void acpi_ex_relinquish_interpreter(void)
186{
187 ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
188
189 /*
190 * If the global serialized flag is set, do not release the interpreter.
191 * This forces the interpreter to be single threaded.
192 */
193 if (!acpi_gbl_all_methods_serialized) {
194 acpi_ex_exit_interpreter();
195 }
196
197 return_VOID;
198}
199
200/*******************************************************************************
201 *
202 * FUNCTION: acpi_ex_truncate_for32bit_table
203 *
204 * PARAMETERS: obj_desc - Object to be truncated
205 *
206 * RETURN: none
207 *
208 * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
209 * 32-bit, as determined by the revision of the DSDT.
210 *
211 ******************************************************************************/
212
213void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc)
214{
215
216 ACPI_FUNCTION_ENTRY();
217
218 /*
219 * Object must be a valid number and we must be executing
220 * a control method. NS node could be there for AML_INT_NAMEPATH_OP.
221 */
222 if ((!obj_desc) ||
223 (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) ||
224 (obj_desc->common.type != ACPI_TYPE_INTEGER)) {
225 return;
226 }
227
228 if (acpi_gbl_integer_byte_width == 4) {
229 /*
230 * We are running a method that exists in a 32-bit ACPI table.
231 * Truncate the value to 32 bits by zeroing out the upper 32-bit field
232 */
233 obj_desc->integer.value &= (u64) ACPI_UINT32_MAX;
234 }
235}
236
237/*******************************************************************************
238 *
239 * FUNCTION: acpi_ex_acquire_global_lock
240 *
241 * PARAMETERS: field_flags - Flags with Lock rule:
242 * always_lock or never_lock
243 *
244 * RETURN: None
245 *
246 * DESCRIPTION: Obtain the ACPI hardware Global Lock, only if the field
247 * flags specifiy that it is to be obtained before field access.
248 *
249 ******************************************************************************/
250
251void acpi_ex_acquire_global_lock(u32 field_flags)
252{
253 acpi_status status;
254
255 ACPI_FUNCTION_TRACE(ex_acquire_global_lock);
256
257 /* Only use the lock if the always_lock bit is set */
258
259 if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
260 return_VOID;
261 }
262
263 /* Attempt to get the global lock, wait forever */
264
265 status = acpi_ex_acquire_mutex_object(ACPI_WAIT_FOREVER,
266 acpi_gbl_global_lock_mutex,
267 acpi_os_get_thread_id());
268
269 if (ACPI_FAILURE(status)) {
270 ACPI_EXCEPTION((AE_INFO, status,
271 "Could not acquire Global Lock"));
272 }
273
274 return_VOID;
275}
276
277/*******************************************************************************
278 *
279 * FUNCTION: acpi_ex_release_global_lock
280 *
281 * PARAMETERS: field_flags - Flags with Lock rule:
282 * always_lock or never_lock
283 *
284 * RETURN: None
285 *
286 * DESCRIPTION: Release the ACPI hardware Global Lock
287 *
288 ******************************************************************************/
289
290void acpi_ex_release_global_lock(u32 field_flags)
291{
292 acpi_status status;
293
294 ACPI_FUNCTION_TRACE(ex_release_global_lock);
295
296 /* Only use the lock if the always_lock bit is set */
297
298 if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
299 return_VOID;
300 }
301
302 /* Release the global lock */
303
304 status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex);
305 if (ACPI_FAILURE(status)) {
306
307 /* Report the error, but there isn't much else we can do */
308
309 ACPI_EXCEPTION((AE_INFO, status,
310 "Could not release Global Lock"));
311 }
312
313 return_VOID;
314}
315
316/*******************************************************************************
317 *
318 * FUNCTION: acpi_ex_digits_needed
319 *
320 * PARAMETERS: Value - Value to be represented
321 * Base - Base of representation
322 *
323 * RETURN: The number of digits.
324 *
325 * DESCRIPTION: Calculate the number of digits needed to represent the Value
326 * in the given Base (Radix)
327 *
328 ******************************************************************************/
329
330static u32 acpi_ex_digits_needed(u64 value, u32 base)
331{
332 u32 num_digits;
333 u64 current_value;
334
335 ACPI_FUNCTION_TRACE(ex_digits_needed);
336
337 /* u64 is unsigned, so we don't worry about a '-' prefix */
338
339 if (value == 0) {
340 return_UINT32(1);
341 }
342
343 current_value = value;
344 num_digits = 0;
345
346 /* Count the digits in the requested base */
347
348 while (current_value) {
349 (void)acpi_ut_short_divide(current_value, base, ¤t_value,
350 NULL);
351 num_digits++;
352 }
353
354 return_UINT32(num_digits);
355}
356
357/*******************************************************************************
358 *
359 * FUNCTION: acpi_ex_eisa_id_to_string
360 *
361 * PARAMETERS: compressed_id - EISAID to be converted
362 * out_string - Where to put the converted string (8 bytes)
363 *
364 * RETURN: None
365 *
366 * DESCRIPTION: Convert a numeric EISAID to string representation. Return
367 * buffer must be large enough to hold the string. The string
368 * returned is always exactly of length ACPI_EISAID_STRING_SIZE
369 * (includes null terminator). The EISAID is always 32 bits.
370 *
371 ******************************************************************************/
372
373void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id)
374{
375 u32 swapped_id;
376
377 ACPI_FUNCTION_ENTRY();
378
379 /* The EISAID should be a 32-bit integer */
380
381 if (compressed_id > ACPI_UINT32_MAX) {
382 ACPI_WARNING((AE_INFO,
383 "Expected EISAID is larger than 32 bits: 0x%8.8X%8.8X, truncating",
384 ACPI_FORMAT_UINT64(compressed_id)));
385 }
386
387 /* Swap ID to big-endian to get contiguous bits */
388
389 swapped_id = acpi_ut_dword_byte_swap((u32)compressed_id);
390
391 /* First 3 bytes are uppercase letters. Next 4 bytes are hexadecimal */
392
393 out_string[0] =
394 (char)(0x40 + (((unsigned long)swapped_id >> 26) & 0x1F));
395 out_string[1] = (char)(0x40 + ((swapped_id >> 21) & 0x1F));
396 out_string[2] = (char)(0x40 + ((swapped_id >> 16) & 0x1F));
397 out_string[3] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 12);
398 out_string[4] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 8);
399 out_string[5] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 4);
400 out_string[6] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 0);
401 out_string[7] = 0;
402}
403
404/*******************************************************************************
405 *
406 * FUNCTION: acpi_ex_integer_to_string
407 *
408 * PARAMETERS: out_string - Where to put the converted string. At least
409 * 21 bytes are needed to hold the largest
410 * possible 64-bit integer.
411 * Value - Value to be converted
412 *
413 * RETURN: None, string
414 *
415 * DESCRIPTION: Convert a 64-bit integer to decimal string representation.
416 * Assumes string buffer is large enough to hold the string. The
417 * largest string is (ACPI_MAX64_DECIMAL_DIGITS + 1).
418 *
419 ******************************************************************************/
420
421void acpi_ex_integer_to_string(char *out_string, u64 value)
422{
423 u32 count;
424 u32 digits_needed;
425 u32 remainder;
426
427 ACPI_FUNCTION_ENTRY();
428
429 digits_needed = acpi_ex_digits_needed(value, 10);
430 out_string[digits_needed] = 0;
431
432 for (count = digits_needed; count > 0; count--) {
433 (void)acpi_ut_short_divide(value, 10, &value, &remainder);
434 out_string[count - 1] = (char)('0' + remainder);
435 }
436}
437
438/*******************************************************************************
439 *
440 * FUNCTION: acpi_is_valid_space_id
441 *
442 * PARAMETERS: space_id - ID to be validated
443 *
444 * RETURN: TRUE if valid/supported ID.
445 *
446 * DESCRIPTION: Validate an operation region space_iD.
447 *
448 ******************************************************************************/
449
450u8 acpi_is_valid_space_id(u8 space_id)
451{
452
453 if ((space_id >= ACPI_NUM_PREDEFINED_REGIONS) &&
454 (space_id < ACPI_USER_REGION_BEGIN) &&
455 (space_id != ACPI_ADR_SPACE_DATA_TABLE) &&
456 (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
457 return (FALSE);
458 }
459
460 return (TRUE);
461}
462
463#endif