Loading...
1/*
2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
3 */
4
5#include <linux/delay.h>
6#include <linux/dmi.h>
7#include <linux/pci.h>
8#include <linux/init.h>
9#include <asm/pci_x86.h>
10
11static void __devinit pci_fixup_i450nx(struct pci_dev *d)
12{
13 /*
14 * i450NX -- Find and scan all secondary buses on all PXB's.
15 */
16 int pxb, reg;
17 u8 busno, suba, subb;
18
19 dev_warn(&d->dev, "Searching for i450NX host bridges\n");
20 reg = 0xd0;
21 for(pxb = 0; pxb < 2; pxb++) {
22 pci_read_config_byte(d, reg++, &busno);
23 pci_read_config_byte(d, reg++, &suba);
24 pci_read_config_byte(d, reg++, &subb);
25 dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
26 suba, subb);
27 if (busno)
28 pci_scan_bus_with_sysdata(busno); /* Bus A */
29 if (suba < subb)
30 pci_scan_bus_with_sysdata(suba+1); /* Bus B */
31 }
32 pcibios_last_bus = -1;
33}
34DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
35
36static void __devinit pci_fixup_i450gx(struct pci_dev *d)
37{
38 /*
39 * i450GX and i450KX -- Find and scan all secondary buses.
40 * (called separately for each PCI bridge found)
41 */
42 u8 busno;
43 pci_read_config_byte(d, 0x4a, &busno);
44 dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
45 pci_scan_bus_with_sysdata(busno);
46 pcibios_last_bus = -1;
47}
48DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
49
50static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
51{
52 /*
53 * UM8886BF IDE controller sets region type bits incorrectly,
54 * therefore they look like memory despite of them being I/O.
55 */
56 int i;
57
58 dev_warn(&d->dev, "Fixing base address flags\n");
59 for(i = 0; i < 4; i++)
60 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
61}
62DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
63
64static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
65{
66 /*
67 * NCR 53C810 returns class code 0 (at least on some systems).
68 * Fix class to be PCI_CLASS_STORAGE_SCSI
69 */
70 if (!d->class) {
71 dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
72 d->class = PCI_CLASS_STORAGE_SCSI << 8;
73 }
74}
75DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
76
77static void __devinit pci_fixup_latency(struct pci_dev *d)
78{
79 /*
80 * SiS 5597 and 5598 chipsets require latency timer set to
81 * at most 32 to avoid lockups.
82 */
83 dev_dbg(&d->dev, "Setting max latency to 32\n");
84 pcibios_max_latency = 32;
85}
86DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
87DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
88
89static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
90{
91 /*
92 * PIIX4 ACPI device: hardwired IRQ9
93 */
94 d->irq = 9;
95}
96DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
97
98/*
99 * Addresses issues with problems in the memory write queue timer in
100 * certain VIA Northbridges. This bugfix is per VIA's specifications,
101 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
102 * to trigger a bug in its integrated ProSavage video card, which
103 * causes screen corruption. We only clear bits 6 and 7 for that chipset,
104 * until VIA can provide us with definitive information on why screen
105 * corruption occurs, and what exactly those bits do.
106 *
107 * VIA 8363,8622,8361 Northbridges:
108 * - bits 5, 6, 7 at offset 0x55 need to be turned off
109 * VIA 8367 (KT266x) Northbridges:
110 * - bits 5, 6, 7 at offset 0x95 need to be turned off
111 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
112 * - bits 6, 7 at offset 0x55 need to be turned off
113 */
114
115#define VIA_8363_KL133_REVISION_ID 0x81
116#define VIA_8363_KM133_REVISION_ID 0x84
117
118static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
119{
120 u8 v;
121 int where = 0x55;
122 int mask = 0x1f; /* clear bits 5, 6, 7 by default */
123
124 if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
125 /* fix pci bus latency issues resulted by NB bios error
126 it appears on bug free^Wreduced kt266x's bios forces
127 NB latency to zero */
128 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
129
130 where = 0x95; /* the memory write queue timer register is
131 different for the KT266x's: 0x95 not 0x55 */
132 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
133 (d->revision == VIA_8363_KL133_REVISION_ID ||
134 d->revision == VIA_8363_KM133_REVISION_ID)) {
135 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
136 causes screen corruption on the KL133/KM133 */
137 }
138
139 pci_read_config_byte(d, where, &v);
140 if (v & ~mask) {
141 dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
142 d->device, d->revision, where, v, mask, v & mask);
143 v &= mask;
144 pci_write_config_byte(d, where, v);
145 }
146}
147DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
148DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
149DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
150DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
151DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
152DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
153DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
154DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
155
156/*
157 * For some reasons Intel decided that certain parts of their
158 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
159 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
160 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
161 * to Intel terminology. These devices do forward all addresses from
162 * system to PCI bus no matter what are their window settings, so they are
163 * "transparent" (or subtractive decoding) from programmers point of view.
164 */
165static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
166{
167 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
168 (dev->device & 0xff00) == 0x2400)
169 dev->transparent = 1;
170}
171DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge);
172
173/*
174 * Fixup for C1 Halt Disconnect problem on nForce2 systems.
175 *
176 * From information provided by "Allen Martin" <AMartin@nvidia.com>:
177 *
178 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
179 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
180 * This allows the state-machine and timer to return to a proper state within
181 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not
182 * issue another HALT within 80 ns of the initial HALT, the failure condition
183 * is avoided.
184 */
185static void pci_fixup_nforce2(struct pci_dev *dev)
186{
187 u32 val;
188
189 /*
190 * Chip Old value New value
191 * C17 0x1F0FFF01 0x1F01FF01
192 * C18D 0x9F0FFF01 0x9F01FF01
193 *
194 * Northbridge chip version may be determined by
195 * reading the PCI revision ID (0xC1 or greater is C18D).
196 */
197 pci_read_config_dword(dev, 0x6c, &val);
198
199 /*
200 * Apply fixup if needed, but don't touch disconnect state
201 */
202 if ((val & 0x00FF0000) != 0x00010000) {
203 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
204 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
205 }
206}
207DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
208DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
209
210/* Max PCI Express root ports */
211#define MAX_PCIEROOT 6
212static int quirk_aspm_offset[MAX_PCIEROOT << 3];
213
214#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
215
216static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
217{
218 return raw_pci_read(pci_domain_nr(bus), bus->number,
219 devfn, where, size, value);
220}
221
222/*
223 * Replace the original pci bus ops for write with a new one that will filter
224 * the request to insure ASPM cannot be enabled.
225 */
226static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
227{
228 u8 offset;
229
230 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
231
232 if ((offset) && (where == offset))
233 value = value & 0xfffffffc;
234
235 return raw_pci_write(pci_domain_nr(bus), bus->number,
236 devfn, where, size, value);
237}
238
239static struct pci_ops quirk_pcie_aspm_ops = {
240 .read = quirk_pcie_aspm_read,
241 .write = quirk_pcie_aspm_write,
242};
243
244/*
245 * Prevents PCI Express ASPM (Active State Power Management) being enabled.
246 *
247 * Save the register offset, where the ASPM control bits are located,
248 * for each PCI Express device that is in the device list of
249 * the root port in an array for fast indexing. Replace the bus ops
250 * with the modified one.
251 */
252static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
253{
254 int cap_base, i;
255 struct pci_bus *pbus;
256 struct pci_dev *dev;
257
258 if ((pbus = pdev->subordinate) == NULL)
259 return;
260
261 /*
262 * Check if the DID of pdev matches one of the six root ports. This
263 * check is needed in the case this function is called directly by the
264 * hot-plug driver.
265 */
266 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
267 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
268 return;
269
270 if (list_empty(&pbus->devices)) {
271 /*
272 * If no device is attached to the root port at power-up or
273 * after hot-remove, the pbus->devices is empty and this code
274 * will set the offsets to zero and the bus ops to parent's bus
275 * ops, which is unmodified.
276 */
277 for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
278 quirk_aspm_offset[i] = 0;
279
280 pbus->ops = pbus->parent->ops;
281 } else {
282 /*
283 * If devices are attached to the root port at power-up or
284 * after hot-add, the code loops through the device list of
285 * each root port to save the register offsets and replace the
286 * bus ops.
287 */
288 list_for_each_entry(dev, &pbus->devices, bus_list) {
289 /* There are 0 to 8 devices attached to this bus */
290 cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
291 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = cap_base + 0x10;
292 }
293 pbus->ops = &quirk_pcie_aspm_ops;
294 }
295}
296DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk);
297DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk);
298DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk);
299DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk);
300DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk);
301DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk);
302
303/*
304 * Fixup to mark boot BIOS video selected by BIOS before it changes
305 *
306 * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
307 *
308 * The standard boot ROM sequence for an x86 machine uses the BIOS
309 * to select an initial video card for boot display. This boot video
310 * card will have it's BIOS copied to C0000 in system RAM.
311 * IORESOURCE_ROM_SHADOW is used to associate the boot video
312 * card with this copy. On laptops this copy has to be used since
313 * the main ROM may be compressed or combined with another image.
314 * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
315 * is marked here since the boot video device will be the only enabled
316 * video device at this point.
317 */
318
319static void __devinit pci_fixup_video(struct pci_dev *pdev)
320{
321 struct pci_dev *bridge;
322 struct pci_bus *bus;
323 u16 config;
324
325 if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
326 return;
327
328 /* Is VGA routed to us? */
329 bus = pdev->bus;
330 while (bus) {
331 bridge = bus->self;
332
333 /*
334 * From information provided by
335 * "David Miller" <davem@davemloft.net>
336 * The bridge control register is valid for PCI header
337 * type BRIDGE, or CARDBUS. Host to PCI controllers use
338 * PCI header type NORMAL.
339 */
340 if (bridge
341 && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
342 || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
343 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
344 &config);
345 if (!(config & PCI_BRIDGE_CTL_VGA))
346 return;
347 }
348 bus = bus->parent;
349 }
350 pci_read_config_word(pdev, PCI_COMMAND, &config);
351 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
352 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
353 dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
354 }
355}
356DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
357
358
359static const struct dmi_system_id __devinitconst msi_k8t_dmi_table[] = {
360 {
361 .ident = "MSI-K8T-Neo2Fir",
362 .matches = {
363 DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
364 DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"),
365 },
366 },
367 {}
368};
369
370/*
371 * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound
372 * card if a PCI-soundcard is added.
373 *
374 * The BIOS only gives options "DISABLED" and "AUTO". This code sets
375 * the corresponding register-value to enable the soundcard.
376 *
377 * The soundcard is only enabled, if the mainborad is identified
378 * via DMI-tables and the soundcard is detected to be off.
379 */
380static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
381{
382 unsigned char val;
383 if (!dmi_check_system(msi_k8t_dmi_table))
384 return; /* only applies to MSI K8T Neo2-FIR */
385
386 pci_read_config_byte(dev, 0x50, &val);
387 if (val & 0x40) {
388 pci_write_config_byte(dev, 0x50, val & (~0x40));
389
390 /* verify the change for status output */
391 pci_read_config_byte(dev, 0x50, &val);
392 if (val & 0x40)
393 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
394 "can't enable onboard soundcard!\n");
395 else
396 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
397 "enabled onboard soundcard\n");
398 }
399}
400DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
401 pci_fixup_msi_k8t_onboard_sound);
402DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
403 pci_fixup_msi_k8t_onboard_sound);
404
405/*
406 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
407 *
408 * We pretend to bring them out of full D3 state, and restore the proper
409 * IRQ, PCI cache line size, and BARs, otherwise the device won't function
410 * properly. In some cases, the device will generate an interrupt on
411 * the wrong IRQ line, causing any devices sharing the line it's
412 * *supposed* to use to be disabled by the kernel's IRQ debug code.
413 */
414static u16 toshiba_line_size;
415
416static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] = {
417 {
418 .ident = "Toshiba PS5 based laptop",
419 .matches = {
420 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
421 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
422 },
423 },
424 {
425 .ident = "Toshiba PSM4 based laptop",
426 .matches = {
427 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
428 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
429 },
430 },
431 {
432 .ident = "Toshiba A40 based laptop",
433 .matches = {
434 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
435 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"),
436 },
437 },
438 { }
439};
440
441static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
442{
443 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
444 return; /* only applies to certain Toshibas (so far) */
445
446 dev->current_state = PCI_D3cold;
447 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
448}
449DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
450 pci_pre_fixup_toshiba_ohci1394);
451
452static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
453{
454 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
455 return; /* only applies to certain Toshibas (so far) */
456
457 /* Restore config space on Toshiba laptops */
458 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
459 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq);
460 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
461 pci_resource_start(dev, 0));
462 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
463 pci_resource_start(dev, 1));
464}
465DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
466 pci_post_fixup_toshiba_ohci1394);
467
468
469/*
470 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
471 * configuration space.
472 */
473static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
474{
475 u8 r;
476 /* clear 'F4 Video Configuration Trap' bit */
477 pci_read_config_byte(dev, 0x42, &r);
478 r &= 0xfd;
479 pci_write_config_byte(dev, 0x42, r);
480}
481DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
482 pci_early_fixup_cyrix_5530);
483DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
484 pci_early_fixup_cyrix_5530);
485
486/*
487 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller:
488 * prevent update of the BAR0, which doesn't look like a normal BAR.
489 */
490static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
491{
492 dev->resource[0].flags |= IORESOURCE_PCI_FIXED;
493}
494DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
495 pci_siemens_interrupt_controller);
496
497/*
498 * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
499 * confusing the PCI engine:
500 */
501static void sb600_disable_hpet_bar(struct pci_dev *dev)
502{
503 u8 val;
504
505 /*
506 * The SB600 and SB700 both share the same device
507 * ID, but the PM register 0x55 does something different
508 * for the SB700, so make sure we are dealing with the
509 * SB600 before touching the bit:
510 */
511
512 pci_read_config_byte(dev, 0x08, &val);
513
514 if (val < 0x2F) {
515 outb(0x55, 0xCD6);
516 val = inb(0xCD7);
517
518 /* Set bit 7 in PM register 0x55 */
519 outb(0x55, 0xCD6);
520 outb(val | 0x80, 0xCD7);
521 }
522}
523DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
1/*
2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
3 */
4
5#include <linux/delay.h>
6#include <linux/dmi.h>
7#include <linux/pci.h>
8#include <linux/init.h>
9#include <linux/vgaarb.h>
10#include <asm/pci_x86.h>
11
12static void __devinit pci_fixup_i450nx(struct pci_dev *d)
13{
14 /*
15 * i450NX -- Find and scan all secondary buses on all PXB's.
16 */
17 int pxb, reg;
18 u8 busno, suba, subb;
19
20 dev_warn(&d->dev, "Searching for i450NX host bridges\n");
21 reg = 0xd0;
22 for(pxb = 0; pxb < 2; pxb++) {
23 pci_read_config_byte(d, reg++, &busno);
24 pci_read_config_byte(d, reg++, &suba);
25 pci_read_config_byte(d, reg++, &subb);
26 dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
27 suba, subb);
28 if (busno)
29 pci_scan_bus_with_sysdata(busno); /* Bus A */
30 if (suba < subb)
31 pci_scan_bus_with_sysdata(suba+1); /* Bus B */
32 }
33 pcibios_last_bus = -1;
34}
35DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
36
37static void __devinit pci_fixup_i450gx(struct pci_dev *d)
38{
39 /*
40 * i450GX and i450KX -- Find and scan all secondary buses.
41 * (called separately for each PCI bridge found)
42 */
43 u8 busno;
44 pci_read_config_byte(d, 0x4a, &busno);
45 dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
46 pci_scan_bus_with_sysdata(busno);
47 pcibios_last_bus = -1;
48}
49DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
50
51static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
52{
53 /*
54 * UM8886BF IDE controller sets region type bits incorrectly,
55 * therefore they look like memory despite of them being I/O.
56 */
57 int i;
58
59 dev_warn(&d->dev, "Fixing base address flags\n");
60 for(i = 0; i < 4; i++)
61 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
62}
63DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
64
65static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
66{
67 /*
68 * NCR 53C810 returns class code 0 (at least on some systems).
69 * Fix class to be PCI_CLASS_STORAGE_SCSI
70 */
71 if (!d->class) {
72 dev_warn(&d->dev, "Fixing NCR 53C810 class code\n");
73 d->class = PCI_CLASS_STORAGE_SCSI << 8;
74 }
75}
76DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
77
78static void __devinit pci_fixup_latency(struct pci_dev *d)
79{
80 /*
81 * SiS 5597 and 5598 chipsets require latency timer set to
82 * at most 32 to avoid lockups.
83 */
84 dev_dbg(&d->dev, "Setting max latency to 32\n");
85 pcibios_max_latency = 32;
86}
87DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
88DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
89
90static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
91{
92 /*
93 * PIIX4 ACPI device: hardwired IRQ9
94 */
95 d->irq = 9;
96}
97DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
98
99/*
100 * Addresses issues with problems in the memory write queue timer in
101 * certain VIA Northbridges. This bugfix is per VIA's specifications,
102 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
103 * to trigger a bug in its integrated ProSavage video card, which
104 * causes screen corruption. We only clear bits 6 and 7 for that chipset,
105 * until VIA can provide us with definitive information on why screen
106 * corruption occurs, and what exactly those bits do.
107 *
108 * VIA 8363,8622,8361 Northbridges:
109 * - bits 5, 6, 7 at offset 0x55 need to be turned off
110 * VIA 8367 (KT266x) Northbridges:
111 * - bits 5, 6, 7 at offset 0x95 need to be turned off
112 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
113 * - bits 6, 7 at offset 0x55 need to be turned off
114 */
115
116#define VIA_8363_KL133_REVISION_ID 0x81
117#define VIA_8363_KM133_REVISION_ID 0x84
118
119static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
120{
121 u8 v;
122 int where = 0x55;
123 int mask = 0x1f; /* clear bits 5, 6, 7 by default */
124
125 if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
126 /* fix pci bus latency issues resulted by NB bios error
127 it appears on bug free^Wreduced kt266x's bios forces
128 NB latency to zero */
129 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
130
131 where = 0x95; /* the memory write queue timer register is
132 different for the KT266x's: 0x95 not 0x55 */
133 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
134 (d->revision == VIA_8363_KL133_REVISION_ID ||
135 d->revision == VIA_8363_KM133_REVISION_ID)) {
136 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
137 causes screen corruption on the KL133/KM133 */
138 }
139
140 pci_read_config_byte(d, where, &v);
141 if (v & ~mask) {
142 dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
143 d->device, d->revision, where, v, mask, v & mask);
144 v &= mask;
145 pci_write_config_byte(d, where, v);
146 }
147}
148DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
149DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
150DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
151DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
152DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
153DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
154DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
155DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
156
157/*
158 * For some reasons Intel decided that certain parts of their
159 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
160 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
161 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
162 * to Intel terminology. These devices do forward all addresses from
163 * system to PCI bus no matter what are their window settings, so they are
164 * "transparent" (or subtractive decoding) from programmers point of view.
165 */
166static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
167{
168 if ((dev->device & 0xff00) == 0x2400)
169 dev->transparent = 1;
170}
171DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
172 PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge);
173
174/*
175 * Fixup for C1 Halt Disconnect problem on nForce2 systems.
176 *
177 * From information provided by "Allen Martin" <AMartin@nvidia.com>:
178 *
179 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
180 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
181 * This allows the state-machine and timer to return to a proper state within
182 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not
183 * issue another HALT within 80 ns of the initial HALT, the failure condition
184 * is avoided.
185 */
186static void pci_fixup_nforce2(struct pci_dev *dev)
187{
188 u32 val;
189
190 /*
191 * Chip Old value New value
192 * C17 0x1F0FFF01 0x1F01FF01
193 * C18D 0x9F0FFF01 0x9F01FF01
194 *
195 * Northbridge chip version may be determined by
196 * reading the PCI revision ID (0xC1 or greater is C18D).
197 */
198 pci_read_config_dword(dev, 0x6c, &val);
199
200 /*
201 * Apply fixup if needed, but don't touch disconnect state
202 */
203 if ((val & 0x00FF0000) != 0x00010000) {
204 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n");
205 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
206 }
207}
208DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
209DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
210
211/* Max PCI Express root ports */
212#define MAX_PCIEROOT 6
213static int quirk_aspm_offset[MAX_PCIEROOT << 3];
214
215#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
216
217static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
218{
219 return raw_pci_read(pci_domain_nr(bus), bus->number,
220 devfn, where, size, value);
221}
222
223/*
224 * Replace the original pci bus ops for write with a new one that will filter
225 * the request to insure ASPM cannot be enabled.
226 */
227static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
228{
229 u8 offset;
230
231 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
232
233 if ((offset) && (where == offset))
234 value = value & 0xfffffffc;
235
236 return raw_pci_write(pci_domain_nr(bus), bus->number,
237 devfn, where, size, value);
238}
239
240static struct pci_ops quirk_pcie_aspm_ops = {
241 .read = quirk_pcie_aspm_read,
242 .write = quirk_pcie_aspm_write,
243};
244
245/*
246 * Prevents PCI Express ASPM (Active State Power Management) being enabled.
247 *
248 * Save the register offset, where the ASPM control bits are located,
249 * for each PCI Express device that is in the device list of
250 * the root port in an array for fast indexing. Replace the bus ops
251 * with the modified one.
252 */
253static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
254{
255 int cap_base, i;
256 struct pci_bus *pbus;
257 struct pci_dev *dev;
258
259 if ((pbus = pdev->subordinate) == NULL)
260 return;
261
262 /*
263 * Check if the DID of pdev matches one of the six root ports. This
264 * check is needed in the case this function is called directly by the
265 * hot-plug driver.
266 */
267 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
268 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
269 return;
270
271 if (list_empty(&pbus->devices)) {
272 /*
273 * If no device is attached to the root port at power-up or
274 * after hot-remove, the pbus->devices is empty and this code
275 * will set the offsets to zero and the bus ops to parent's bus
276 * ops, which is unmodified.
277 */
278 for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
279 quirk_aspm_offset[i] = 0;
280
281 pbus->ops = pbus->parent->ops;
282 } else {
283 /*
284 * If devices are attached to the root port at power-up or
285 * after hot-add, the code loops through the device list of
286 * each root port to save the register offsets and replace the
287 * bus ops.
288 */
289 list_for_each_entry(dev, &pbus->devices, bus_list) {
290 /* There are 0 to 8 devices attached to this bus */
291 cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
292 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = cap_base + 0x10;
293 }
294 pbus->ops = &quirk_pcie_aspm_ops;
295 }
296}
297DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk);
298DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk);
299DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk);
300DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk);
301DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk);
302DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk);
303
304/*
305 * Fixup to mark boot BIOS video selected by BIOS before it changes
306 *
307 * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
308 *
309 * The standard boot ROM sequence for an x86 machine uses the BIOS
310 * to select an initial video card for boot display. This boot video
311 * card will have it's BIOS copied to C0000 in system RAM.
312 * IORESOURCE_ROM_SHADOW is used to associate the boot video
313 * card with this copy. On laptops this copy has to be used since
314 * the main ROM may be compressed or combined with another image.
315 * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
316 * is marked here since the boot video device will be the only enabled
317 * video device at this point.
318 */
319
320static void __devinit pci_fixup_video(struct pci_dev *pdev)
321{
322 struct pci_dev *bridge;
323 struct pci_bus *bus;
324 u16 config;
325
326 /* Is VGA routed to us? */
327 bus = pdev->bus;
328 while (bus) {
329 bridge = bus->self;
330
331 /*
332 * From information provided by
333 * "David Miller" <davem@davemloft.net>
334 * The bridge control register is valid for PCI header
335 * type BRIDGE, or CARDBUS. Host to PCI controllers use
336 * PCI header type NORMAL.
337 */
338 if (bridge
339 && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
340 || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
341 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
342 &config);
343 if (!(config & PCI_BRIDGE_CTL_VGA))
344 return;
345 }
346 bus = bus->parent;
347 }
348 pci_read_config_word(pdev, PCI_COMMAND, &config);
349 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
350 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
351 dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
352 if (!vga_default_device())
353 vga_set_default_device(pdev);
354 }
355}
356DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
357 PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
358
359
360static const struct dmi_system_id __devinitconst msi_k8t_dmi_table[] = {
361 {
362 .ident = "MSI-K8T-Neo2Fir",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
365 DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"),
366 },
367 },
368 {}
369};
370
371/*
372 * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound
373 * card if a PCI-soundcard is added.
374 *
375 * The BIOS only gives options "DISABLED" and "AUTO". This code sets
376 * the corresponding register-value to enable the soundcard.
377 *
378 * The soundcard is only enabled, if the mainborad is identified
379 * via DMI-tables and the soundcard is detected to be off.
380 */
381static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
382{
383 unsigned char val;
384 if (!dmi_check_system(msi_k8t_dmi_table))
385 return; /* only applies to MSI K8T Neo2-FIR */
386
387 pci_read_config_byte(dev, 0x50, &val);
388 if (val & 0x40) {
389 pci_write_config_byte(dev, 0x50, val & (~0x40));
390
391 /* verify the change for status output */
392 pci_read_config_byte(dev, 0x50, &val);
393 if (val & 0x40)
394 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
395 "can't enable onboard soundcard!\n");
396 else
397 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; "
398 "enabled onboard soundcard\n");
399 }
400}
401DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
402 pci_fixup_msi_k8t_onboard_sound);
403DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
404 pci_fixup_msi_k8t_onboard_sound);
405
406/*
407 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
408 *
409 * We pretend to bring them out of full D3 state, and restore the proper
410 * IRQ, PCI cache line size, and BARs, otherwise the device won't function
411 * properly. In some cases, the device will generate an interrupt on
412 * the wrong IRQ line, causing any devices sharing the line it's
413 * *supposed* to use to be disabled by the kernel's IRQ debug code.
414 */
415static u16 toshiba_line_size;
416
417static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] = {
418 {
419 .ident = "Toshiba PS5 based laptop",
420 .matches = {
421 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
422 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
423 },
424 },
425 {
426 .ident = "Toshiba PSM4 based laptop",
427 .matches = {
428 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
429 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
430 },
431 },
432 {
433 .ident = "Toshiba A40 based laptop",
434 .matches = {
435 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
436 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"),
437 },
438 },
439 { }
440};
441
442static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
443{
444 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
445 return; /* only applies to certain Toshibas (so far) */
446
447 dev->current_state = PCI_D3cold;
448 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
449}
450DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
451 pci_pre_fixup_toshiba_ohci1394);
452
453static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
454{
455 if (!dmi_check_system(toshiba_ohci1394_dmi_table))
456 return; /* only applies to certain Toshibas (so far) */
457
458 /* Restore config space on Toshiba laptops */
459 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
460 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq);
461 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
462 pci_resource_start(dev, 0));
463 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
464 pci_resource_start(dev, 1));
465}
466DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
467 pci_post_fixup_toshiba_ohci1394);
468
469
470/*
471 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
472 * configuration space.
473 */
474static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
475{
476 u8 r;
477 /* clear 'F4 Video Configuration Trap' bit */
478 pci_read_config_byte(dev, 0x42, &r);
479 r &= 0xfd;
480 pci_write_config_byte(dev, 0x42, r);
481}
482DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
483 pci_early_fixup_cyrix_5530);
484DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
485 pci_early_fixup_cyrix_5530);
486
487/*
488 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller:
489 * prevent update of the BAR0, which doesn't look like a normal BAR.
490 */
491static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
492{
493 dev->resource[0].flags |= IORESOURCE_PCI_FIXED;
494}
495DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
496 pci_siemens_interrupt_controller);
497
498/*
499 * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
500 * confusing the PCI engine:
501 */
502static void sb600_disable_hpet_bar(struct pci_dev *dev)
503{
504 u8 val;
505
506 /*
507 * The SB600 and SB700 both share the same device
508 * ID, but the PM register 0x55 does something different
509 * for the SB700, so make sure we are dealing with the
510 * SB600 before touching the bit:
511 */
512
513 pci_read_config_byte(dev, 0x08, &val);
514
515 if (val < 0x2F) {
516 outb(0x55, 0xCD6);
517 val = inb(0xCD7);
518
519 /* Set bit 7 in PM register 0x55 */
520 outb(0x55, 0xCD6);
521 outb(val | 0x80, 0xCD7);
522 }
523}
524DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
525
526/*
527 * Twinhead H12Y needs us to block out a region otherwise we map devices
528 * there and any access kills the box.
529 *
530 * See: https://bugzilla.kernel.org/show_bug.cgi?id=10231
531 *
532 * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor)
533 */
534static void __devinit twinhead_reserve_killing_zone(struct pci_dev *dev)
535{
536 if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) {
537 pr_info("Reserving memory on Twinhead H12Y\n");
538 request_mem_region(0xFFB00000, 0x100000, "twinhead");
539 }
540}
541DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);