Linux Audio

Check our new training course

Loading...
v3.1
  1/*
  2 * net/tipc/eth_media.c: Ethernet bearer support for TIPC
  3 *
  4 * Copyright (c) 2001-2007, Ericsson AB
  5 * Copyright (c) 2005-2007, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#include "core.h"
 38#include "bearer.h"
 39
 40#define MAX_ETH_BEARERS		2
 41#define ETH_LINK_PRIORITY	TIPC_DEF_LINK_PRI
 42#define ETH_LINK_TOLERANCE	TIPC_DEF_LINK_TOL
 43#define ETH_LINK_WINDOW		TIPC_DEF_LINK_WIN
 44
 45/**
 46 * struct eth_bearer - Ethernet bearer data structure
 47 * @bearer: ptr to associated "generic" bearer structure
 48 * @dev: ptr to associated Ethernet network device
 49 * @tipc_packet_type: used in binding TIPC to Ethernet driver
 
 50 */
 51
 52struct eth_bearer {
 53	struct tipc_bearer *bearer;
 54	struct net_device *dev;
 55	struct packet_type tipc_packet_type;
 
 56};
 57
 
 58static struct eth_bearer eth_bearers[MAX_ETH_BEARERS];
 59static int eth_started;
 60static struct notifier_block notifier;
 61
 62/**
 63 * send_msg - send a TIPC message out over an Ethernet interface
 
 
 
 64 */
 
 
 
 
 
 
 
 65
 
 
 
 66static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr,
 67		    struct tipc_media_addr *dest)
 68{
 69	struct sk_buff *clone;
 70	struct net_device *dev;
 71	int delta;
 72
 73	clone = skb_clone(buf, GFP_ATOMIC);
 74	if (!clone)
 75		return 0;
 76
 77	dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev;
 78	delta = dev->hard_header_len - skb_headroom(buf);
 79
 80	if ((delta > 0) &&
 81	    pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
 82		kfree_skb(clone);
 83		return 0;
 84	}
 85
 86	skb_reset_network_header(clone);
 87	clone->dev = dev;
 88	dev_hard_header(clone, dev, ETH_P_TIPC, &dest->dev_addr.eth_addr,
 89			dev->dev_addr, clone->len);
 90	dev_queue_xmit(clone);
 91	return 0;
 92}
 93
 94/**
 95 * recv_msg - handle incoming TIPC message from an Ethernet interface
 96 *
 97 * Accept only packets explicitly sent to this node, or broadcast packets;
 98 * ignores packets sent using Ethernet multicast, and traffic sent to other
 99 * nodes (which can happen if interface is running in promiscuous mode).
100 */
101
102static int recv_msg(struct sk_buff *buf, struct net_device *dev,
103		    struct packet_type *pt, struct net_device *orig_dev)
104{
105	struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv;
106
107	if (!net_eq(dev_net(dev), &init_net)) {
108		kfree_skb(buf);
109		return 0;
110	}
111
112	if (likely(eb_ptr->bearer)) {
113		if (likely(buf->pkt_type <= PACKET_BROADCAST)) {
114			buf->next = NULL;
115			tipc_recv_msg(buf, eb_ptr->bearer);
116			return 0;
117		}
118	}
119	kfree_skb(buf);
120	return 0;
121}
122
123/**
124 * enable_bearer - attach TIPC bearer to an Ethernet interface
125 */
126
127static int enable_bearer(struct tipc_bearer *tb_ptr)
128{
129	struct net_device *dev = NULL;
130	struct net_device *pdev = NULL;
131	struct eth_bearer *eb_ptr = &eth_bearers[0];
132	struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
133	char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1;
134	int pending_dev = 0;
135
136	/* Find unused Ethernet bearer structure */
137
138	while (eb_ptr->dev) {
139		if (!eb_ptr->bearer)
140			pending_dev++;
141		if (++eb_ptr == stop)
142			return pending_dev ? -EAGAIN : -EDQUOT;
143	}
144
145	/* Find device with specified name */
146
147	for_each_netdev(&init_net, pdev) {
148		if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) {
149			dev = pdev;
 
150			break;
151		}
152	}
 
153	if (!dev)
154		return -ENODEV;
155
156	/* Find Ethernet bearer for device (or create one) */
157
158	while ((eb_ptr != stop) && eb_ptr->dev && (eb_ptr->dev != dev))
159		eb_ptr++;
160	if (eb_ptr == stop)
161		return -EDQUOT;
162	if (!eb_ptr->dev) {
163		eb_ptr->dev = dev;
164		eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC);
165		eb_ptr->tipc_packet_type.dev = dev;
166		eb_ptr->tipc_packet_type.func = recv_msg;
167		eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr;
168		INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list));
169		dev_hold(dev);
170		dev_add_pack(&eb_ptr->tipc_packet_type);
171	}
172
173	/* Associate TIPC bearer with Ethernet bearer */
174
175	eb_ptr->bearer = tb_ptr;
176	tb_ptr->usr_handle = (void *)eb_ptr;
177	tb_ptr->mtu = dev->mtu;
178	tb_ptr->blocked = 0;
179	tb_ptr->addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
180	memcpy(&tb_ptr->addr.dev_addr, dev->dev_addr, ETH_ALEN);
181	return 0;
182}
183
184/**
185 * disable_bearer - detach TIPC bearer from an Ethernet interface
186 *
187 * We really should do dev_remove_pack() here, but this function can not be
188 * called at tasklet level. => Use eth_bearer->bearer as a flag to throw away
189 * incoming buffers, & postpone dev_remove_pack() to eth_media_stop() on exit.
190 */
 
 
 
 
 
 
 
 
 
191
 
 
 
 
 
 
 
192static void disable_bearer(struct tipc_bearer *tb_ptr)
193{
194	((struct eth_bearer *)tb_ptr->usr_handle)->bearer = NULL;
 
 
 
 
195}
196
197/**
198 * recv_notification - handle device updates from OS
199 *
200 * Change the state of the Ethernet bearer (if any) associated with the
201 * specified device.
202 */
203
204static int recv_notification(struct notifier_block *nb, unsigned long evt,
205			     void *dv)
206{
207	struct net_device *dev = (struct net_device *)dv;
208	struct eth_bearer *eb_ptr = &eth_bearers[0];
209	struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
210
211	if (!net_eq(dev_net(dev), &init_net))
212		return NOTIFY_DONE;
213
214	while ((eb_ptr->dev != dev)) {
215		if (++eb_ptr == stop)
216			return NOTIFY_DONE;	/* couldn't find device */
217	}
218	if (!eb_ptr->bearer)
219		return NOTIFY_DONE;		/* bearer had been disabled */
220
221	eb_ptr->bearer->mtu = dev->mtu;
222
223	switch (evt) {
224	case NETDEV_CHANGE:
225		if (netif_carrier_ok(dev))
226			tipc_continue(eb_ptr->bearer);
227		else
228			tipc_block_bearer(eb_ptr->bearer->name);
229		break;
230	case NETDEV_UP:
231		tipc_continue(eb_ptr->bearer);
232		break;
233	case NETDEV_DOWN:
234		tipc_block_bearer(eb_ptr->bearer->name);
235		break;
236	case NETDEV_CHANGEMTU:
237	case NETDEV_CHANGEADDR:
238		tipc_block_bearer(eb_ptr->bearer->name);
239		tipc_continue(eb_ptr->bearer);
240		break;
241	case NETDEV_UNREGISTER:
242	case NETDEV_CHANGENAME:
243		tipc_disable_bearer(eb_ptr->bearer->name);
244		break;
245	}
246	return NOTIFY_OK;
247}
248
249/**
250 * eth_addr2str - convert Ethernet address to string
251 */
 
 
 
 
 
 
 
 
252
253static char *eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size)
 
 
 
254{
255	unchar *addr = (unchar *)&a->dev_addr;
 
 
 
 
 
 
 
 
256
257	if (str_size < 18)
258		*str_buf = '\0';
259	else
260		sprintf(str_buf, "%pM", addr);
261	return str_buf;
262}
263
264/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
265 * tipc_eth_media_start - activate Ethernet bearer support
266 *
267 * Register Ethernet media type with TIPC bearer code.  Also register
268 * with OS for notifications about device state changes.
269 */
270
271int tipc_eth_media_start(void)
272{
273	struct tipc_media_addr bcast_addr;
274	int res;
275
276	if (eth_started)
277		return -EINVAL;
278
279	bcast_addr.type = htonl(TIPC_MEDIA_TYPE_ETH);
280	memset(&bcast_addr.dev_addr, 0xff, ETH_ALEN);
281
282	memset(eth_bearers, 0, sizeof(eth_bearers));
283
284	res = tipc_register_media(TIPC_MEDIA_TYPE_ETH, "eth",
285				  enable_bearer, disable_bearer, send_msg,
286				  eth_addr2str, &bcast_addr, ETH_LINK_PRIORITY,
287				  ETH_LINK_TOLERANCE, ETH_LINK_WINDOW);
288	if (res)
289		return res;
290
291	notifier.notifier_call = &recv_notification;
292	notifier.priority = 0;
293	res = register_netdevice_notifier(&notifier);
294	if (!res)
295		eth_started = 1;
296	return res;
297}
298
299/**
300 * tipc_eth_media_stop - deactivate Ethernet bearer support
301 */
302
303void tipc_eth_media_stop(void)
304{
305	int i;
306
307	if (!eth_started)
308		return;
309
 
310	unregister_netdevice_notifier(&notifier);
311	for (i = 0; i < MAX_ETH_BEARERS ; i++) {
312		if (eth_bearers[i].bearer) {
313			eth_bearers[i].bearer->blocked = 1;
314			eth_bearers[i].bearer = NULL;
315		}
316		if (eth_bearers[i].dev) {
317			dev_remove_pack(&eth_bearers[i].tipc_packet_type);
318			dev_put(eth_bearers[i].dev);
319		}
320	}
321	memset(&eth_bearers, 0, sizeof(eth_bearers));
322	eth_started = 0;
323}
v3.5.6
  1/*
  2 * net/tipc/eth_media.c: Ethernet bearer support for TIPC
  3 *
  4 * Copyright (c) 2001-2007, Ericsson AB
  5 * Copyright (c) 2005-2008, 2011, Wind River Systems
  6 * All rights reserved.
  7 *
  8 * Redistribution and use in source and binary forms, with or without
  9 * modification, are permitted provided that the following conditions are met:
 10 *
 11 * 1. Redistributions of source code must retain the above copyright
 12 *    notice, this list of conditions and the following disclaimer.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. Neither the names of the copyright holders nor the names of its
 17 *    contributors may be used to endorse or promote products derived from
 18 *    this software without specific prior written permission.
 19 *
 20 * Alternatively, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") version 2 as published by the Free
 22 * Software Foundation.
 23 *
 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 34 * POSSIBILITY OF SUCH DAMAGE.
 35 */
 36
 37#include "core.h"
 38#include "bearer.h"
 39
 40#define MAX_ETH_BEARERS		MAX_BEARERS
 41
 42#define ETH_ADDR_OFFSET	4	/* message header offset of MAC address */
 
 43
 44/**
 45 * struct eth_bearer - Ethernet bearer data structure
 46 * @bearer: ptr to associated "generic" bearer structure
 47 * @dev: ptr to associated Ethernet network device
 48 * @tipc_packet_type: used in binding TIPC to Ethernet driver
 49 * @cleanup: work item used when disabling bearer
 50 */
 
 51struct eth_bearer {
 52	struct tipc_bearer *bearer;
 53	struct net_device *dev;
 54	struct packet_type tipc_packet_type;
 55	struct work_struct cleanup;
 56};
 57
 58static struct tipc_media eth_media_info;
 59static struct eth_bearer eth_bearers[MAX_ETH_BEARERS];
 60static int eth_started;
 61static struct notifier_block notifier;
 62
 63/**
 64 * eth_media_addr_set - initialize Ethernet media address structure
 65 *
 66 * Media-dependent "value" field stores MAC address in first 6 bytes
 67 * and zeroes out the remaining bytes.
 68 */
 69static void eth_media_addr_set(struct tipc_media_addr *a, char *mac)
 70{
 71	memcpy(a->value, mac, ETH_ALEN);
 72	memset(a->value + ETH_ALEN, 0, sizeof(a->value) - ETH_ALEN);
 73	a->media_id = TIPC_MEDIA_TYPE_ETH;
 74	a->broadcast = !memcmp(mac, eth_media_info.bcast_addr.value, ETH_ALEN);
 75}
 76
 77/**
 78 * send_msg - send a TIPC message out over an Ethernet interface
 79 */
 80static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr,
 81		    struct tipc_media_addr *dest)
 82{
 83	struct sk_buff *clone;
 84	struct net_device *dev;
 85	int delta;
 86
 87	clone = skb_clone(buf, GFP_ATOMIC);
 88	if (!clone)
 89		return 0;
 90
 91	dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev;
 92	delta = dev->hard_header_len - skb_headroom(buf);
 93
 94	if ((delta > 0) &&
 95	    pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
 96		kfree_skb(clone);
 97		return 0;
 98	}
 99
100	skb_reset_network_header(clone);
101	clone->dev = dev;
102	dev_hard_header(clone, dev, ETH_P_TIPC, dest->value,
103			dev->dev_addr, clone->len);
104	dev_queue_xmit(clone);
105	return 0;
106}
107
108/**
109 * recv_msg - handle incoming TIPC message from an Ethernet interface
110 *
111 * Accept only packets explicitly sent to this node, or broadcast packets;
112 * ignores packets sent using Ethernet multicast, and traffic sent to other
113 * nodes (which can happen if interface is running in promiscuous mode).
114 */
 
115static int recv_msg(struct sk_buff *buf, struct net_device *dev,
116		    struct packet_type *pt, struct net_device *orig_dev)
117{
118	struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv;
119
120	if (!net_eq(dev_net(dev), &init_net)) {
121		kfree_skb(buf);
122		return 0;
123	}
124
125	if (likely(eb_ptr->bearer)) {
126		if (likely(buf->pkt_type <= PACKET_BROADCAST)) {
127			buf->next = NULL;
128			tipc_recv_msg(buf, eb_ptr->bearer);
129			return 0;
130		}
131	}
132	kfree_skb(buf);
133	return 0;
134}
135
136/**
137 * enable_bearer - attach TIPC bearer to an Ethernet interface
138 */
 
139static int enable_bearer(struct tipc_bearer *tb_ptr)
140{
141	struct net_device *dev = NULL;
142	struct net_device *pdev = NULL;
143	struct eth_bearer *eb_ptr = &eth_bearers[0];
144	struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
145	char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1;
146	int pending_dev = 0;
147
148	/* Find unused Ethernet bearer structure */
 
149	while (eb_ptr->dev) {
150		if (!eb_ptr->bearer)
151			pending_dev++;
152		if (++eb_ptr == stop)
153			return pending_dev ? -EAGAIN : -EDQUOT;
154	}
155
156	/* Find device with specified name */
157	read_lock(&dev_base_lock);
158	for_each_netdev(&init_net, pdev) {
159		if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) {
160			dev = pdev;
161			dev_hold(dev);
162			break;
163		}
164	}
165	read_unlock(&dev_base_lock);
166	if (!dev)
167		return -ENODEV;
168
169	/* Create Ethernet bearer for device */
170	eb_ptr->dev = dev;
171	eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC);
172	eb_ptr->tipc_packet_type.dev = dev;
173	eb_ptr->tipc_packet_type.func = recv_msg;
174	eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr;
175	INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list));
176	dev_add_pack(&eb_ptr->tipc_packet_type);
 
 
 
 
 
 
 
 
177
178	/* Associate TIPC bearer with Ethernet bearer */
 
179	eb_ptr->bearer = tb_ptr;
180	tb_ptr->usr_handle = (void *)eb_ptr;
181	tb_ptr->mtu = dev->mtu;
182	tb_ptr->blocked = 0;
183	eth_media_addr_set(&tb_ptr->addr, (char *)dev->dev_addr);
 
184	return 0;
185}
186
187/**
188 * cleanup_bearer - break association between Ethernet bearer and interface
189 *
190 * This routine must be invoked from a work queue because it can sleep.
 
 
191 */
192static void cleanup_bearer(struct work_struct *work)
193{
194	struct eth_bearer *eb_ptr =
195		container_of(work, struct eth_bearer, cleanup);
196
197	dev_remove_pack(&eb_ptr->tipc_packet_type);
198	dev_put(eb_ptr->dev);
199	eb_ptr->dev = NULL;
200}
201
202/**
203 * disable_bearer - detach TIPC bearer from an Ethernet interface
204 *
205 * Mark Ethernet bearer as inactive so that incoming buffers are thrown away,
206 * then get worker thread to complete bearer cleanup.  (Can't do cleanup
207 * here because cleanup code needs to sleep and caller holds spinlocks.)
208 */
209static void disable_bearer(struct tipc_bearer *tb_ptr)
210{
211	struct eth_bearer *eb_ptr = (struct eth_bearer *)tb_ptr->usr_handle;
212
213	eb_ptr->bearer = NULL;
214	INIT_WORK(&eb_ptr->cleanup, cleanup_bearer);
215	schedule_work(&eb_ptr->cleanup);
216}
217
218/**
219 * recv_notification - handle device updates from OS
220 *
221 * Change the state of the Ethernet bearer (if any) associated with the
222 * specified device.
223 */
 
224static int recv_notification(struct notifier_block *nb, unsigned long evt,
225			     void *dv)
226{
227	struct net_device *dev = (struct net_device *)dv;
228	struct eth_bearer *eb_ptr = &eth_bearers[0];
229	struct eth_bearer *stop = &eth_bearers[MAX_ETH_BEARERS];
230
231	if (!net_eq(dev_net(dev), &init_net))
232		return NOTIFY_DONE;
233
234	while ((eb_ptr->dev != dev)) {
235		if (++eb_ptr == stop)
236			return NOTIFY_DONE;	/* couldn't find device */
237	}
238	if (!eb_ptr->bearer)
239		return NOTIFY_DONE;		/* bearer had been disabled */
240
241	eb_ptr->bearer->mtu = dev->mtu;
242
243	switch (evt) {
244	case NETDEV_CHANGE:
245		if (netif_carrier_ok(dev))
246			tipc_continue(eb_ptr->bearer);
247		else
248			tipc_block_bearer(eb_ptr->bearer->name);
249		break;
250	case NETDEV_UP:
251		tipc_continue(eb_ptr->bearer);
252		break;
253	case NETDEV_DOWN:
254		tipc_block_bearer(eb_ptr->bearer->name);
255		break;
256	case NETDEV_CHANGEMTU:
257	case NETDEV_CHANGEADDR:
258		tipc_block_bearer(eb_ptr->bearer->name);
259		tipc_continue(eb_ptr->bearer);
260		break;
261	case NETDEV_UNREGISTER:
262	case NETDEV_CHANGENAME:
263		tipc_disable_bearer(eb_ptr->bearer->name);
264		break;
265	}
266	return NOTIFY_OK;
267}
268
269/**
270 * eth_addr2str - convert Ethernet address to string
271 */
272static int eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size)
273{
274	if (str_size < 18)	/* 18 = strlen("aa:bb:cc:dd:ee:ff\0") */
275		return 1;
276
277	sprintf(str_buf, "%pM", a->value);
278	return 0;
279}
280
281/**
282 * eth_str2addr - convert string to Ethernet address
283 */
284static int eth_str2addr(struct tipc_media_addr *a, char *str_buf)
285{
286	char mac[ETH_ALEN];
287	int r;
288
289	r = sscanf(str_buf, "%02x:%02x:%02x:%02x:%02x:%02x",
290		       (u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2],
291		       (u32 *)&mac[3], (u32 *)&mac[4], (u32 *)&mac[5]);
292
293	if (r != ETH_ALEN)
294		return 1;
295
296	eth_media_addr_set(a, mac);
297	return 0;
 
 
 
298}
299
300/**
301 * eth_str2addr - convert Ethernet address format to message header format
302 */
303static int eth_addr2msg(struct tipc_media_addr *a, char *msg_area)
304{
305	memset(msg_area, 0, TIPC_MEDIA_ADDR_SIZE);
306	msg_area[TIPC_MEDIA_TYPE_OFFSET] = TIPC_MEDIA_TYPE_ETH;
307	memcpy(msg_area + ETH_ADDR_OFFSET, a->value, ETH_ALEN);
308	return 0;
309}
310
311/**
312 * eth_str2addr - convert message header address format to Ethernet format
313 */
314static int eth_msg2addr(struct tipc_media_addr *a, char *msg_area)
315{
316	if (msg_area[TIPC_MEDIA_TYPE_OFFSET] != TIPC_MEDIA_TYPE_ETH)
317		return 1;
318
319	eth_media_addr_set(a, msg_area + ETH_ADDR_OFFSET);
320	return 0;
321}
322
323/*
324 * Ethernet media registration info
325 */
326static struct tipc_media eth_media_info = {
327	.send_msg	= send_msg,
328	.enable_bearer	= enable_bearer,
329	.disable_bearer	= disable_bearer,
330	.addr2str	= eth_addr2str,
331	.str2addr	= eth_str2addr,
332	.addr2msg	= eth_addr2msg,
333	.msg2addr	= eth_msg2addr,
334	.bcast_addr	= { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
335			    TIPC_MEDIA_TYPE_ETH, 1 },
336	.priority	= TIPC_DEF_LINK_PRI,
337	.tolerance	= TIPC_DEF_LINK_TOL,
338	.window		= TIPC_DEF_LINK_WIN,
339	.type_id	= TIPC_MEDIA_TYPE_ETH,
340	.name		= "eth"
341};
342
343/**
344 * tipc_eth_media_start - activate Ethernet bearer support
345 *
346 * Register Ethernet media type with TIPC bearer code.  Also register
347 * with OS for notifications about device state changes.
348 */
 
349int tipc_eth_media_start(void)
350{
 
351	int res;
352
353	if (eth_started)
354		return -EINVAL;
355
356	res = tipc_register_media(&eth_media_info);
 
 
 
 
 
 
 
 
357	if (res)
358		return res;
359
360	notifier.notifier_call = &recv_notification;
361	notifier.priority = 0;
362	res = register_netdevice_notifier(&notifier);
363	if (!res)
364		eth_started = 1;
365	return res;
366}
367
368/**
369 * tipc_eth_media_stop - deactivate Ethernet bearer support
370 */
 
371void tipc_eth_media_stop(void)
372{
 
 
373	if (!eth_started)
374		return;
375
376	flush_scheduled_work();
377	unregister_netdevice_notifier(&notifier);
 
 
 
 
 
 
 
 
 
 
 
378	eth_started = 0;
379}