Loading...
1/*
2 * w1_io.c
3 *
4 * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
5 *
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <asm/io.h>
23
24#include <linux/delay.h>
25#include <linux/moduleparam.h>
26#include <linux/module.h>
27
28#include "w1.h"
29#include "w1_log.h"
30
31static int w1_delay_parm = 1;
32module_param_named(delay_coef, w1_delay_parm, int, 0);
33
34static u8 w1_crc8_table[] = {
35 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
36 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
37 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98,
38 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255,
39 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7,
40 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154,
41 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36,
42 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185,
43 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205,
44 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80,
45 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238,
46 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115,
47 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139,
48 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22,
49 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168,
50 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53
51};
52
53static void w1_delay(unsigned long tm)
54{
55 udelay(tm * w1_delay_parm);
56}
57
58static void w1_write_bit(struct w1_master *dev, int bit);
59static u8 w1_read_bit(struct w1_master *dev);
60
61/**
62 * Generates a write-0 or write-1 cycle and samples the level.
63 */
64static u8 w1_touch_bit(struct w1_master *dev, int bit)
65{
66 if (dev->bus_master->touch_bit)
67 return dev->bus_master->touch_bit(dev->bus_master->data, bit);
68 else if (bit)
69 return w1_read_bit(dev);
70 else {
71 w1_write_bit(dev, 0);
72 return 0;
73 }
74}
75
76/**
77 * Generates a write-0 or write-1 cycle.
78 * Only call if dev->bus_master->touch_bit is NULL
79 */
80static void w1_write_bit(struct w1_master *dev, int bit)
81{
82 if (bit) {
83 dev->bus_master->write_bit(dev->bus_master->data, 0);
84 w1_delay(6);
85 dev->bus_master->write_bit(dev->bus_master->data, 1);
86 w1_delay(64);
87 } else {
88 dev->bus_master->write_bit(dev->bus_master->data, 0);
89 w1_delay(60);
90 dev->bus_master->write_bit(dev->bus_master->data, 1);
91 w1_delay(10);
92 }
93}
94
95/**
96 * Pre-write operation, currently only supporting strong pullups.
97 * Program the hardware for a strong pullup, if one has been requested and
98 * the hardware supports it.
99 *
100 * @param dev the master device
101 */
102static void w1_pre_write(struct w1_master *dev)
103{
104 if (dev->pullup_duration &&
105 dev->enable_pullup && dev->bus_master->set_pullup) {
106 dev->bus_master->set_pullup(dev->bus_master->data,
107 dev->pullup_duration);
108 }
109}
110
111/**
112 * Post-write operation, currently only supporting strong pullups.
113 * If a strong pullup was requested, clear it if the hardware supports
114 * them, or execute the delay otherwise, in either case clear the request.
115 *
116 * @param dev the master device
117 */
118static void w1_post_write(struct w1_master *dev)
119{
120 if (dev->pullup_duration) {
121 if (dev->enable_pullup && dev->bus_master->set_pullup)
122 dev->bus_master->set_pullup(dev->bus_master->data, 0);
123 else
124 msleep(dev->pullup_duration);
125 dev->pullup_duration = 0;
126 }
127}
128
129/**
130 * Writes 8 bits.
131 *
132 * @param dev the master device
133 * @param byte the byte to write
134 */
135void w1_write_8(struct w1_master *dev, u8 byte)
136{
137 int i;
138
139 if (dev->bus_master->write_byte) {
140 w1_pre_write(dev);
141 dev->bus_master->write_byte(dev->bus_master->data, byte);
142 }
143 else
144 for (i = 0; i < 8; ++i) {
145 if (i == 7)
146 w1_pre_write(dev);
147 w1_touch_bit(dev, (byte >> i) & 0x1);
148 }
149 w1_post_write(dev);
150}
151EXPORT_SYMBOL_GPL(w1_write_8);
152
153
154/**
155 * Generates a write-1 cycle and samples the level.
156 * Only call if dev->bus_master->touch_bit is NULL
157 */
158static u8 w1_read_bit(struct w1_master *dev)
159{
160 int result;
161
162 dev->bus_master->write_bit(dev->bus_master->data, 0);
163 w1_delay(6);
164 dev->bus_master->write_bit(dev->bus_master->data, 1);
165 w1_delay(9);
166
167 result = dev->bus_master->read_bit(dev->bus_master->data);
168 w1_delay(55);
169
170 return result & 0x1;
171}
172
173/**
174 * Does a triplet - used for searching ROM addresses.
175 * Return bits:
176 * bit 0 = id_bit
177 * bit 1 = comp_bit
178 * bit 2 = dir_taken
179 * If both bits 0 & 1 are set, the search should be restarted.
180 *
181 * @param dev the master device
182 * @param bdir the bit to write if both id_bit and comp_bit are 0
183 * @return bit fields - see above
184 */
185u8 w1_triplet(struct w1_master *dev, int bdir)
186{
187 if (dev->bus_master->triplet)
188 return dev->bus_master->triplet(dev->bus_master->data, bdir);
189 else {
190 u8 id_bit = w1_touch_bit(dev, 1);
191 u8 comp_bit = w1_touch_bit(dev, 1);
192 u8 retval;
193
194 if (id_bit && comp_bit)
195 return 0x03; /* error */
196
197 if (!id_bit && !comp_bit) {
198 /* Both bits are valid, take the direction given */
199 retval = bdir ? 0x04 : 0;
200 } else {
201 /* Only one bit is valid, take that direction */
202 bdir = id_bit;
203 retval = id_bit ? 0x05 : 0x02;
204 }
205
206 if (dev->bus_master->touch_bit)
207 w1_touch_bit(dev, bdir);
208 else
209 w1_write_bit(dev, bdir);
210 return retval;
211 }
212}
213
214/**
215 * Reads 8 bits.
216 *
217 * @param dev the master device
218 * @return the byte read
219 */
220u8 w1_read_8(struct w1_master *dev)
221{
222 int i;
223 u8 res = 0;
224
225 if (dev->bus_master->read_byte)
226 res = dev->bus_master->read_byte(dev->bus_master->data);
227 else
228 for (i = 0; i < 8; ++i)
229 res |= (w1_touch_bit(dev,1) << i);
230
231 return res;
232}
233EXPORT_SYMBOL_GPL(w1_read_8);
234
235/**
236 * Writes a series of bytes.
237 *
238 * @param dev the master device
239 * @param buf pointer to the data to write
240 * @param len the number of bytes to write
241 */
242void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
243{
244 int i;
245
246 if (dev->bus_master->write_block) {
247 w1_pre_write(dev);
248 dev->bus_master->write_block(dev->bus_master->data, buf, len);
249 }
250 else
251 for (i = 0; i < len; ++i)
252 w1_write_8(dev, buf[i]); /* calls w1_pre_write */
253 w1_post_write(dev);
254}
255EXPORT_SYMBOL_GPL(w1_write_block);
256
257/**
258 * Touches a series of bytes.
259 *
260 * @param dev the master device
261 * @param buf pointer to the data to write
262 * @param len the number of bytes to write
263 */
264void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
265{
266 int i, j;
267 u8 tmp;
268
269 for (i = 0; i < len; ++i) {
270 tmp = 0;
271 for (j = 0; j < 8; ++j) {
272 if (j == 7)
273 w1_pre_write(dev);
274 tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j;
275 }
276
277 buf[i] = tmp;
278 }
279}
280EXPORT_SYMBOL_GPL(w1_touch_block);
281
282/**
283 * Reads a series of bytes.
284 *
285 * @param dev the master device
286 * @param buf pointer to the buffer to fill
287 * @param len the number of bytes to read
288 * @return the number of bytes read
289 */
290u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
291{
292 int i;
293 u8 ret;
294
295 if (dev->bus_master->read_block)
296 ret = dev->bus_master->read_block(dev->bus_master->data, buf, len);
297 else {
298 for (i = 0; i < len; ++i)
299 buf[i] = w1_read_8(dev);
300 ret = len;
301 }
302
303 return ret;
304}
305EXPORT_SYMBOL_GPL(w1_read_block);
306
307/**
308 * Issues a reset bus sequence.
309 *
310 * @param dev The bus master pointer
311 * @return 0=Device present, 1=No device present or error
312 */
313int w1_reset_bus(struct w1_master *dev)
314{
315 int result;
316
317 if (dev->bus_master->reset_bus)
318 result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
319 else {
320 dev->bus_master->write_bit(dev->bus_master->data, 0);
321 /* minimum 480, max ? us
322 * be nice and sleep, except 18b20 spec lists 960us maximum,
323 * so until we can sleep with microsecond accuracy, spin.
324 * Feel free to come up with some other way to give up the
325 * cpu for such a short amount of time AND get it back in
326 * the maximum amount of time.
327 */
328 w1_delay(480);
329 dev->bus_master->write_bit(dev->bus_master->data, 1);
330 w1_delay(70);
331
332 result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
333 /* minmum 70 (above) + 410 = 480 us
334 * There aren't any timing requirements between a reset and
335 * the following transactions. Sleeping is safe here.
336 */
337 /* w1_delay(410); min required time */
338 msleep(1);
339 }
340
341 return result;
342}
343EXPORT_SYMBOL_GPL(w1_reset_bus);
344
345u8 w1_calc_crc8(u8 * data, int len)
346{
347 u8 crc = 0;
348
349 while (len--)
350 crc = w1_crc8_table[crc ^ *data++];
351
352 return crc;
353}
354EXPORT_SYMBOL_GPL(w1_calc_crc8);
355
356void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
357{
358 dev->attempts++;
359 if (dev->bus_master->search)
360 dev->bus_master->search(dev->bus_master->data, dev,
361 search_type, cb);
362 else
363 w1_search(dev, search_type, cb);
364}
365
366/**
367 * Resets the bus and then selects the slave by sending either a skip rom
368 * or a rom match.
369 * The w1 master lock must be held.
370 *
371 * @param sl the slave to select
372 * @return 0=success, anything else=error
373 */
374int w1_reset_select_slave(struct w1_slave *sl)
375{
376 if (w1_reset_bus(sl->master))
377 return -1;
378
379 if (sl->master->slave_count == 1)
380 w1_write_8(sl->master, W1_SKIP_ROM);
381 else {
382 u8 match[9] = {W1_MATCH_ROM, };
383 u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
384
385 memcpy(&match[1], &rn, 8);
386 w1_write_block(sl->master, match, 9);
387 }
388 return 0;
389}
390EXPORT_SYMBOL_GPL(w1_reset_select_slave);
391
392/**
393 * When the workflow with a slave amongst many requires several
394 * successive commands a reset between each, this function is similar
395 * to doing a reset then a match ROM for the last matched ROM. The
396 * advantage being that the matched ROM step is skipped in favor of the
397 * resume command. The slave must support the command of course.
398 *
399 * If the bus has only one slave, traditionnaly the match ROM is skipped
400 * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this
401 * doesn't work of course, but the resume command is the next best thing.
402 *
403 * The w1 master lock must be held.
404 *
405 * @param dev the master device
406 */
407int w1_reset_resume_command(struct w1_master *dev)
408{
409 if (w1_reset_bus(dev))
410 return -1;
411
412 /* This will make only the last matched slave perform a skip ROM. */
413 w1_write_8(dev, W1_RESUME_CMD);
414 return 0;
415}
416EXPORT_SYMBOL_GPL(w1_reset_resume_command);
417
418/**
419 * Put out a strong pull-up of the specified duration after the next write
420 * operation. Not all hardware supports strong pullups. Hardware that
421 * doesn't support strong pullups will sleep for the given time after the
422 * write operation without a strong pullup. This is a one shot request for
423 * the next write, specifying zero will clear a previous request.
424 * The w1 master lock must be held.
425 *
426 * @param delay time in milliseconds
427 * @return 0=success, anything else=error
428 */
429void w1_next_pullup(struct w1_master *dev, int delay)
430{
431 dev->pullup_duration = delay;
432}
433EXPORT_SYMBOL_GPL(w1_next_pullup);
1/*
2 * w1_io.c
3 *
4 * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
5 *
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <asm/io.h>
23
24#include <linux/delay.h>
25#include <linux/moduleparam.h>
26#include <linux/module.h>
27
28#include "w1.h"
29#include "w1_log.h"
30
31static int w1_delay_parm = 1;
32module_param_named(delay_coef, w1_delay_parm, int, 0);
33
34static int w1_disable_irqs = 0;
35module_param_named(disable_irqs, w1_disable_irqs, int, 0);
36
37static u8 w1_crc8_table[] = {
38 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
39 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
40 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98,
41 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255,
42 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7,
43 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154,
44 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36,
45 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185,
46 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205,
47 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80,
48 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238,
49 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115,
50 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139,
51 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22,
52 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168,
53 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53
54};
55
56static void w1_delay(unsigned long tm)
57{
58 udelay(tm * w1_delay_parm);
59}
60
61static void w1_write_bit(struct w1_master *dev, int bit);
62static u8 w1_read_bit(struct w1_master *dev);
63
64/**
65 * Generates a write-0 or write-1 cycle and samples the level.
66 */
67static u8 w1_touch_bit(struct w1_master *dev, int bit)
68{
69 if (dev->bus_master->touch_bit)
70 return dev->bus_master->touch_bit(dev->bus_master->data, bit);
71 else if (bit)
72 return w1_read_bit(dev);
73 else {
74 w1_write_bit(dev, 0);
75 return 0;
76 }
77}
78
79/**
80 * Generates a write-0 or write-1 cycle.
81 * Only call if dev->bus_master->touch_bit is NULL
82 */
83static void w1_write_bit(struct w1_master *dev, int bit)
84{
85 unsigned long flags = 0;
86
87 if(w1_disable_irqs) local_irq_save(flags);
88
89 if (bit) {
90 dev->bus_master->write_bit(dev->bus_master->data, 0);
91 w1_delay(6);
92 dev->bus_master->write_bit(dev->bus_master->data, 1);
93 w1_delay(64);
94 } else {
95 dev->bus_master->write_bit(dev->bus_master->data, 0);
96 w1_delay(60);
97 dev->bus_master->write_bit(dev->bus_master->data, 1);
98 w1_delay(10);
99 }
100
101 if(w1_disable_irqs) local_irq_restore(flags);
102}
103
104/**
105 * Pre-write operation, currently only supporting strong pullups.
106 * Program the hardware for a strong pullup, if one has been requested and
107 * the hardware supports it.
108 *
109 * @param dev the master device
110 */
111static void w1_pre_write(struct w1_master *dev)
112{
113 if (dev->pullup_duration &&
114 dev->enable_pullup && dev->bus_master->set_pullup) {
115 dev->bus_master->set_pullup(dev->bus_master->data,
116 dev->pullup_duration);
117 }
118}
119
120/**
121 * Post-write operation, currently only supporting strong pullups.
122 * If a strong pullup was requested, clear it if the hardware supports
123 * them, or execute the delay otherwise, in either case clear the request.
124 *
125 * @param dev the master device
126 */
127static void w1_post_write(struct w1_master *dev)
128{
129 if (dev->pullup_duration) {
130 if (dev->enable_pullup && dev->bus_master->set_pullup)
131 dev->bus_master->set_pullup(dev->bus_master->data, 0);
132 else
133 msleep(dev->pullup_duration);
134 dev->pullup_duration = 0;
135 }
136}
137
138/**
139 * Writes 8 bits.
140 *
141 * @param dev the master device
142 * @param byte the byte to write
143 */
144void w1_write_8(struct w1_master *dev, u8 byte)
145{
146 int i;
147
148 if (dev->bus_master->write_byte) {
149 w1_pre_write(dev);
150 dev->bus_master->write_byte(dev->bus_master->data, byte);
151 }
152 else
153 for (i = 0; i < 8; ++i) {
154 if (i == 7)
155 w1_pre_write(dev);
156 w1_touch_bit(dev, (byte >> i) & 0x1);
157 }
158 w1_post_write(dev);
159}
160EXPORT_SYMBOL_GPL(w1_write_8);
161
162
163/**
164 * Generates a write-1 cycle and samples the level.
165 * Only call if dev->bus_master->touch_bit is NULL
166 */
167static u8 w1_read_bit(struct w1_master *dev)
168{
169 int result;
170 unsigned long flags = 0;
171
172 /* sample timing is critical here */
173 local_irq_save(flags);
174 dev->bus_master->write_bit(dev->bus_master->data, 0);
175 w1_delay(6);
176 dev->bus_master->write_bit(dev->bus_master->data, 1);
177 w1_delay(9);
178
179 result = dev->bus_master->read_bit(dev->bus_master->data);
180 local_irq_restore(flags);
181
182 w1_delay(55);
183
184 return result & 0x1;
185}
186
187/**
188 * Does a triplet - used for searching ROM addresses.
189 * Return bits:
190 * bit 0 = id_bit
191 * bit 1 = comp_bit
192 * bit 2 = dir_taken
193 * If both bits 0 & 1 are set, the search should be restarted.
194 *
195 * @param dev the master device
196 * @param bdir the bit to write if both id_bit and comp_bit are 0
197 * @return bit fields - see above
198 */
199u8 w1_triplet(struct w1_master *dev, int bdir)
200{
201 if (dev->bus_master->triplet)
202 return dev->bus_master->triplet(dev->bus_master->data, bdir);
203 else {
204 u8 id_bit = w1_touch_bit(dev, 1);
205 u8 comp_bit = w1_touch_bit(dev, 1);
206 u8 retval;
207
208 if (id_bit && comp_bit)
209 return 0x03; /* error */
210
211 if (!id_bit && !comp_bit) {
212 /* Both bits are valid, take the direction given */
213 retval = bdir ? 0x04 : 0;
214 } else {
215 /* Only one bit is valid, take that direction */
216 bdir = id_bit;
217 retval = id_bit ? 0x05 : 0x02;
218 }
219
220 if (dev->bus_master->touch_bit)
221 w1_touch_bit(dev, bdir);
222 else
223 w1_write_bit(dev, bdir);
224 return retval;
225 }
226}
227
228/**
229 * Reads 8 bits.
230 *
231 * @param dev the master device
232 * @return the byte read
233 */
234u8 w1_read_8(struct w1_master *dev)
235{
236 int i;
237 u8 res = 0;
238
239 if (dev->bus_master->read_byte)
240 res = dev->bus_master->read_byte(dev->bus_master->data);
241 else
242 for (i = 0; i < 8; ++i)
243 res |= (w1_touch_bit(dev,1) << i);
244
245 return res;
246}
247EXPORT_SYMBOL_GPL(w1_read_8);
248
249/**
250 * Writes a series of bytes.
251 *
252 * @param dev the master device
253 * @param buf pointer to the data to write
254 * @param len the number of bytes to write
255 */
256void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
257{
258 int i;
259
260 if (dev->bus_master->write_block) {
261 w1_pre_write(dev);
262 dev->bus_master->write_block(dev->bus_master->data, buf, len);
263 }
264 else
265 for (i = 0; i < len; ++i)
266 w1_write_8(dev, buf[i]); /* calls w1_pre_write */
267 w1_post_write(dev);
268}
269EXPORT_SYMBOL_GPL(w1_write_block);
270
271/**
272 * Touches a series of bytes.
273 *
274 * @param dev the master device
275 * @param buf pointer to the data to write
276 * @param len the number of bytes to write
277 */
278void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
279{
280 int i, j;
281 u8 tmp;
282
283 for (i = 0; i < len; ++i) {
284 tmp = 0;
285 for (j = 0; j < 8; ++j) {
286 if (j == 7)
287 w1_pre_write(dev);
288 tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j;
289 }
290
291 buf[i] = tmp;
292 }
293}
294EXPORT_SYMBOL_GPL(w1_touch_block);
295
296/**
297 * Reads a series of bytes.
298 *
299 * @param dev the master device
300 * @param buf pointer to the buffer to fill
301 * @param len the number of bytes to read
302 * @return the number of bytes read
303 */
304u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
305{
306 int i;
307 u8 ret;
308
309 if (dev->bus_master->read_block)
310 ret = dev->bus_master->read_block(dev->bus_master->data, buf, len);
311 else {
312 for (i = 0; i < len; ++i)
313 buf[i] = w1_read_8(dev);
314 ret = len;
315 }
316
317 return ret;
318}
319EXPORT_SYMBOL_GPL(w1_read_block);
320
321/**
322 * Issues a reset bus sequence.
323 *
324 * @param dev The bus master pointer
325 * @return 0=Device present, 1=No device present or error
326 */
327int w1_reset_bus(struct w1_master *dev)
328{
329 int result;
330 unsigned long flags = 0;
331
332 if(w1_disable_irqs) local_irq_save(flags);
333
334 if (dev->bus_master->reset_bus)
335 result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
336 else {
337 dev->bus_master->write_bit(dev->bus_master->data, 0);
338 /* minimum 480, max ? us
339 * be nice and sleep, except 18b20 spec lists 960us maximum,
340 * so until we can sleep with microsecond accuracy, spin.
341 * Feel free to come up with some other way to give up the
342 * cpu for such a short amount of time AND get it back in
343 * the maximum amount of time.
344 */
345 w1_delay(500);
346 dev->bus_master->write_bit(dev->bus_master->data, 1);
347 w1_delay(70);
348
349 result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
350 /* minmum 70 (above) + 430 = 500 us
351 * There aren't any timing requirements between a reset and
352 * the following transactions. Sleeping is safe here.
353 */
354 /* w1_delay(430); min required time */
355 msleep(1);
356 }
357
358 if(w1_disable_irqs) local_irq_restore(flags);
359
360 return result;
361}
362EXPORT_SYMBOL_GPL(w1_reset_bus);
363
364u8 w1_calc_crc8(u8 * data, int len)
365{
366 u8 crc = 0;
367
368 while (len--)
369 crc = w1_crc8_table[crc ^ *data++];
370
371 return crc;
372}
373EXPORT_SYMBOL_GPL(w1_calc_crc8);
374
375void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
376{
377 dev->attempts++;
378 if (dev->bus_master->search)
379 dev->bus_master->search(dev->bus_master->data, dev,
380 search_type, cb);
381 else
382 w1_search(dev, search_type, cb);
383}
384
385/**
386 * Resets the bus and then selects the slave by sending either a skip rom
387 * or a rom match.
388 * The w1 master lock must be held.
389 *
390 * @param sl the slave to select
391 * @return 0=success, anything else=error
392 */
393int w1_reset_select_slave(struct w1_slave *sl)
394{
395 if (w1_reset_bus(sl->master))
396 return -1;
397
398 if (sl->master->slave_count == 1)
399 w1_write_8(sl->master, W1_SKIP_ROM);
400 else {
401 u8 match[9] = {W1_MATCH_ROM, };
402 u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
403
404 memcpy(&match[1], &rn, 8);
405 w1_write_block(sl->master, match, 9);
406 }
407 return 0;
408}
409EXPORT_SYMBOL_GPL(w1_reset_select_slave);
410
411/**
412 * When the workflow with a slave amongst many requires several
413 * successive commands a reset between each, this function is similar
414 * to doing a reset then a match ROM for the last matched ROM. The
415 * advantage being that the matched ROM step is skipped in favor of the
416 * resume command. The slave must support the command of course.
417 *
418 * If the bus has only one slave, traditionnaly the match ROM is skipped
419 * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this
420 * doesn't work of course, but the resume command is the next best thing.
421 *
422 * The w1 master lock must be held.
423 *
424 * @param dev the master device
425 */
426int w1_reset_resume_command(struct w1_master *dev)
427{
428 if (w1_reset_bus(dev))
429 return -1;
430
431 /* This will make only the last matched slave perform a skip ROM. */
432 w1_write_8(dev, W1_RESUME_CMD);
433 return 0;
434}
435EXPORT_SYMBOL_GPL(w1_reset_resume_command);
436
437/**
438 * Put out a strong pull-up of the specified duration after the next write
439 * operation. Not all hardware supports strong pullups. Hardware that
440 * doesn't support strong pullups will sleep for the given time after the
441 * write operation without a strong pullup. This is a one shot request for
442 * the next write, specifying zero will clear a previous request.
443 * The w1 master lock must be held.
444 *
445 * @param delay time in milliseconds
446 * @return 0=success, anything else=error
447 */
448void w1_next_pullup(struct w1_master *dev, int delay)
449{
450 dev->pullup_duration = delay;
451}
452EXPORT_SYMBOL_GPL(w1_next_pullup);