Loading...
1/*
2 * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
3 *
4 * Copyright (C) 2001 REINER SCT
5 * Author: Matthias Bruestle
6 *
7 * Contact: support@reiner-sct.com (see MAINTAINERS)
8 *
9 * This program is largely derived from work by the linux-usb group
10 * and associated source files. Please see the usb/serial files for
11 * individual credits and copyrights.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
19 * patience.
20 *
21 * In case of problems, please write to the contact e-mail address
22 * mentioned above.
23 *
24 * Please note that later models of the cyberjack reader family are
25 * supported by a libusb-based userspace device driver.
26 *
27 * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
28 */
29
30
31#include <linux/kernel.h>
32#include <linux/errno.h>
33#include <linux/init.h>
34#include <linux/slab.h>
35#include <linux/tty.h>
36#include <linux/tty_driver.h>
37#include <linux/tty_flip.h>
38#include <linux/module.h>
39#include <linux/spinlock.h>
40#include <linux/uaccess.h>
41#include <linux/usb.h>
42#include <linux/usb/serial.h>
43
44#define CYBERJACK_LOCAL_BUF_SIZE 32
45
46static int debug;
47
48/*
49 * Version Information
50 */
51#define DRIVER_VERSION "v1.01"
52#define DRIVER_AUTHOR "Matthias Bruestle"
53#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
54
55
56#define CYBERJACK_VENDOR_ID 0x0C4B
57#define CYBERJACK_PRODUCT_ID 0x0100
58
59/* Function prototypes */
60static int cyberjack_startup(struct usb_serial *serial);
61static void cyberjack_disconnect(struct usb_serial *serial);
62static void cyberjack_release(struct usb_serial *serial);
63static int cyberjack_open(struct tty_struct *tty,
64 struct usb_serial_port *port);
65static void cyberjack_close(struct usb_serial_port *port);
66static int cyberjack_write(struct tty_struct *tty,
67 struct usb_serial_port *port, const unsigned char *buf, int count);
68static int cyberjack_write_room(struct tty_struct *tty);
69static void cyberjack_read_int_callback(struct urb *urb);
70static void cyberjack_read_bulk_callback(struct urb *urb);
71static void cyberjack_write_bulk_callback(struct urb *urb);
72
73static const struct usb_device_id id_table[] = {
74 { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
75 { } /* Terminating entry */
76};
77
78MODULE_DEVICE_TABLE(usb, id_table);
79
80static struct usb_driver cyberjack_driver = {
81 .name = "cyberjack",
82 .probe = usb_serial_probe,
83 .disconnect = usb_serial_disconnect,
84 .id_table = id_table,
85 .no_dynamic_id = 1,
86};
87
88static struct usb_serial_driver cyberjack_device = {
89 .driver = {
90 .owner = THIS_MODULE,
91 .name = "cyberjack",
92 },
93 .description = "Reiner SCT Cyberjack USB card reader",
94 .usb_driver = &cyberjack_driver,
95 .id_table = id_table,
96 .num_ports = 1,
97 .attach = cyberjack_startup,
98 .disconnect = cyberjack_disconnect,
99 .release = cyberjack_release,
100 .open = cyberjack_open,
101 .close = cyberjack_close,
102 .write = cyberjack_write,
103 .write_room = cyberjack_write_room,
104 .read_int_callback = cyberjack_read_int_callback,
105 .read_bulk_callback = cyberjack_read_bulk_callback,
106 .write_bulk_callback = cyberjack_write_bulk_callback,
107};
108
109struct cyberjack_private {
110 spinlock_t lock; /* Lock for SMP */
111 short rdtodo; /* Bytes still to read */
112 unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */
113 short wrfilled; /* Overall data size we already got */
114 short wrsent; /* Data already sent */
115};
116
117/* do some startup allocations not currently performed by usb_serial_probe() */
118static int cyberjack_startup(struct usb_serial *serial)
119{
120 struct cyberjack_private *priv;
121 int i;
122
123 dbg("%s", __func__);
124
125 /* allocate the private data structure */
126 priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
127 if (!priv)
128 return -ENOMEM;
129
130 /* set initial values */
131 spin_lock_init(&priv->lock);
132 priv->rdtodo = 0;
133 priv->wrfilled = 0;
134 priv->wrsent = 0;
135 usb_set_serial_port_data(serial->port[0], priv);
136
137 init_waitqueue_head(&serial->port[0]->write_wait);
138
139 for (i = 0; i < serial->num_ports; ++i) {
140 int result;
141 serial->port[i]->interrupt_in_urb->dev = serial->dev;
142 result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
143 GFP_KERNEL);
144 if (result)
145 dev_err(&serial->dev->dev,
146 "usb_submit_urb(read int) failed\n");
147 dbg("%s - usb_submit_urb(int urb)", __func__);
148 }
149
150 return 0;
151}
152
153static void cyberjack_disconnect(struct usb_serial *serial)
154{
155 int i;
156
157 dbg("%s", __func__);
158
159 for (i = 0; i < serial->num_ports; ++i)
160 usb_kill_urb(serial->port[i]->interrupt_in_urb);
161}
162
163static void cyberjack_release(struct usb_serial *serial)
164{
165 int i;
166
167 dbg("%s", __func__);
168
169 for (i = 0; i < serial->num_ports; ++i) {
170 /* My special items, the standard routines free my urbs */
171 kfree(usb_get_serial_port_data(serial->port[i]));
172 }
173}
174
175static int cyberjack_open(struct tty_struct *tty,
176 struct usb_serial_port *port)
177{
178 struct cyberjack_private *priv;
179 unsigned long flags;
180 int result = 0;
181
182 dbg("%s - port %d", __func__, port->number);
183
184 dbg("%s - usb_clear_halt", __func__);
185 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
186
187 priv = usb_get_serial_port_data(port);
188 spin_lock_irqsave(&priv->lock, flags);
189 priv->rdtodo = 0;
190 priv->wrfilled = 0;
191 priv->wrsent = 0;
192 spin_unlock_irqrestore(&priv->lock, flags);
193
194 return result;
195}
196
197static void cyberjack_close(struct usb_serial_port *port)
198{
199 dbg("%s - port %d", __func__, port->number);
200
201 if (port->serial->dev) {
202 /* shutdown any bulk reads that might be going on */
203 usb_kill_urb(port->write_urb);
204 usb_kill_urb(port->read_urb);
205 }
206}
207
208static int cyberjack_write(struct tty_struct *tty,
209 struct usb_serial_port *port, const unsigned char *buf, int count)
210{
211 struct usb_serial *serial = port->serial;
212 struct cyberjack_private *priv = usb_get_serial_port_data(port);
213 unsigned long flags;
214 int result;
215 int wrexpected;
216
217 dbg("%s - port %d", __func__, port->number);
218
219 if (count == 0) {
220 dbg("%s - write request of 0 bytes", __func__);
221 return 0;
222 }
223
224 spin_lock_bh(&port->lock);
225 if (port->write_urb_busy) {
226 spin_unlock_bh(&port->lock);
227 dbg("%s - already writing", __func__);
228 return 0;
229 }
230 port->write_urb_busy = 1;
231 spin_unlock_bh(&port->lock);
232
233 spin_lock_irqsave(&priv->lock, flags);
234
235 if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
236 /* To much data for buffer. Reset buffer. */
237 priv->wrfilled = 0;
238 port->write_urb_busy = 0;
239 spin_unlock_irqrestore(&priv->lock, flags);
240 return 0;
241 }
242
243 /* Copy data */
244 memcpy(priv->wrbuf + priv->wrfilled, buf, count);
245
246 usb_serial_debug_data(debug, &port->dev, __func__, count,
247 priv->wrbuf + priv->wrfilled);
248 priv->wrfilled += count;
249
250 if (priv->wrfilled >= 3) {
251 wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
252 dbg("%s - expected data: %d", __func__, wrexpected);
253 } else
254 wrexpected = sizeof(priv->wrbuf);
255
256 if (priv->wrfilled >= wrexpected) {
257 /* We have enough data to begin transmission */
258 int length;
259
260 dbg("%s - transmitting data (frame 1)", __func__);
261 length = (wrexpected > port->bulk_out_size) ?
262 port->bulk_out_size : wrexpected;
263
264 memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
265 priv->wrsent = length;
266
267 /* set up our urb */
268 usb_fill_bulk_urb(port->write_urb, serial->dev,
269 usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
270 port->write_urb->transfer_buffer, length,
271 ((serial->type->write_bulk_callback) ?
272 serial->type->write_bulk_callback :
273 cyberjack_write_bulk_callback),
274 port);
275
276 /* send the data out the bulk port */
277 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
278 if (result) {
279 dev_err(&port->dev,
280 "%s - failed submitting write urb, error %d",
281 __func__, result);
282 /* Throw away data. No better idea what to do with it. */
283 priv->wrfilled = 0;
284 priv->wrsent = 0;
285 spin_unlock_irqrestore(&priv->lock, flags);
286 port->write_urb_busy = 0;
287 return 0;
288 }
289
290 dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
291 dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
292
293 if (priv->wrsent >= priv->wrfilled) {
294 dbg("%s - buffer cleaned", __func__);
295 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
296 priv->wrfilled = 0;
297 priv->wrsent = 0;
298 }
299 }
300
301 spin_unlock_irqrestore(&priv->lock, flags);
302
303 return count;
304}
305
306static int cyberjack_write_room(struct tty_struct *tty)
307{
308 /* FIXME: .... */
309 return CYBERJACK_LOCAL_BUF_SIZE;
310}
311
312static void cyberjack_read_int_callback(struct urb *urb)
313{
314 struct usb_serial_port *port = urb->context;
315 struct cyberjack_private *priv = usb_get_serial_port_data(port);
316 unsigned char *data = urb->transfer_buffer;
317 int status = urb->status;
318 int result;
319
320 dbg("%s - port %d", __func__, port->number);
321
322 /* the urb might have been killed. */
323 if (status)
324 return;
325
326 usb_serial_debug_data(debug, &port->dev, __func__,
327 urb->actual_length, data);
328
329 /* React only to interrupts signaling a bulk_in transfer */
330 if (urb->actual_length == 4 && data[0] == 0x01) {
331 short old_rdtodo;
332
333 /* This is a announcement of coming bulk_ins. */
334 unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
335
336 spin_lock(&priv->lock);
337
338 old_rdtodo = priv->rdtodo;
339
340 if (old_rdtodo + size < old_rdtodo) {
341 dbg("To many bulk_in urbs to do.");
342 spin_unlock(&priv->lock);
343 goto resubmit;
344 }
345
346 /* "+=" is probably more fault tollerant than "=" */
347 priv->rdtodo += size;
348
349 dbg("%s - rdtodo: %d", __func__, priv->rdtodo);
350
351 spin_unlock(&priv->lock);
352
353 if (!old_rdtodo) {
354 port->read_urb->dev = port->serial->dev;
355 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
356 if (result)
357 dev_err(&port->dev, "%s - failed resubmitting "
358 "read urb, error %d\n",
359 __func__, result);
360 dbg("%s - usb_submit_urb(read urb)", __func__);
361 }
362 }
363
364resubmit:
365 port->interrupt_in_urb->dev = port->serial->dev;
366 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
367 if (result)
368 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
369 dbg("%s - usb_submit_urb(int urb)", __func__);
370}
371
372static void cyberjack_read_bulk_callback(struct urb *urb)
373{
374 struct usb_serial_port *port = urb->context;
375 struct cyberjack_private *priv = usb_get_serial_port_data(port);
376 struct tty_struct *tty;
377 unsigned char *data = urb->transfer_buffer;
378 short todo;
379 int result;
380 int status = urb->status;
381
382 dbg("%s - port %d", __func__, port->number);
383
384 usb_serial_debug_data(debug, &port->dev, __func__,
385 urb->actual_length, data);
386 if (status) {
387 dbg("%s - nonzero read bulk status received: %d",
388 __func__, status);
389 return;
390 }
391
392 tty = tty_port_tty_get(&port->port);
393 if (!tty) {
394 dbg("%s - ignoring since device not open", __func__);
395 return;
396 }
397 if (urb->actual_length) {
398 tty_insert_flip_string(tty, data, urb->actual_length);
399 tty_flip_buffer_push(tty);
400 }
401 tty_kref_put(tty);
402
403 spin_lock(&priv->lock);
404
405 /* Reduce urbs to do by one. */
406 priv->rdtodo -= urb->actual_length;
407 /* Just to be sure */
408 if (priv->rdtodo < 0)
409 priv->rdtodo = 0;
410 todo = priv->rdtodo;
411
412 spin_unlock(&priv->lock);
413
414 dbg("%s - rdtodo: %d", __func__, todo);
415
416 /* Continue to read if we have still urbs to do. */
417 if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
418 port->read_urb->dev = port->serial->dev;
419 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
420 if (result)
421 dev_err(&port->dev, "%s - failed resubmitting read "
422 "urb, error %d\n", __func__, result);
423 dbg("%s - usb_submit_urb(read urb)", __func__);
424 }
425}
426
427static void cyberjack_write_bulk_callback(struct urb *urb)
428{
429 struct usb_serial_port *port = urb->context;
430 struct cyberjack_private *priv = usb_get_serial_port_data(port);
431 int status = urb->status;
432
433 dbg("%s - port %d", __func__, port->number);
434
435 port->write_urb_busy = 0;
436 if (status) {
437 dbg("%s - nonzero write bulk status received: %d",
438 __func__, status);
439 return;
440 }
441
442 spin_lock(&priv->lock);
443
444 /* only do something if we have more data to send */
445 if (priv->wrfilled) {
446 int length, blksize, result;
447
448 dbg("%s - transmitting data (frame n)", __func__);
449
450 length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
451 port->bulk_out_size : (priv->wrfilled - priv->wrsent);
452
453 memcpy(port->write_urb->transfer_buffer,
454 priv->wrbuf + priv->wrsent, length);
455 priv->wrsent += length;
456
457 /* set up our urb */
458 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
459 usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
460 port->write_urb->transfer_buffer, length,
461 ((port->serial->type->write_bulk_callback) ?
462 port->serial->type->write_bulk_callback :
463 cyberjack_write_bulk_callback),
464 port);
465
466 /* send the data out the bulk port */
467 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
468 if (result) {
469 dev_err(&port->dev,
470 "%s - failed submitting write urb, error %d\n",
471 __func__, result);
472 /* Throw away data. No better idea what to do with it. */
473 priv->wrfilled = 0;
474 priv->wrsent = 0;
475 goto exit;
476 }
477
478 dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
479 dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
480
481 blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
482
483 if (priv->wrsent >= priv->wrfilled ||
484 priv->wrsent >= blksize) {
485 dbg("%s - buffer cleaned", __func__);
486 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
487 priv->wrfilled = 0;
488 priv->wrsent = 0;
489 }
490 }
491
492exit:
493 spin_unlock(&priv->lock);
494 usb_serial_port_softint(port);
495}
496
497static int __init cyberjack_init(void)
498{
499 int retval;
500 retval = usb_serial_register(&cyberjack_device);
501 if (retval)
502 goto failed_usb_serial_register;
503 retval = usb_register(&cyberjack_driver);
504 if (retval)
505 goto failed_usb_register;
506
507 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
508 DRIVER_AUTHOR "\n");
509 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
510
511 return 0;
512failed_usb_register:
513 usb_serial_deregister(&cyberjack_device);
514failed_usb_serial_register:
515 return retval;
516}
517
518static void __exit cyberjack_exit(void)
519{
520 usb_deregister(&cyberjack_driver);
521 usb_serial_deregister(&cyberjack_device);
522}
523
524module_init(cyberjack_init);
525module_exit(cyberjack_exit);
526
527MODULE_AUTHOR(DRIVER_AUTHOR);
528MODULE_DESCRIPTION(DRIVER_DESC);
529MODULE_VERSION(DRIVER_VERSION);
530MODULE_LICENSE("GPL");
531
532module_param(debug, bool, S_IRUGO | S_IWUSR);
533MODULE_PARM_DESC(debug, "Debug enabled or not");
1/*
2 * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
3 *
4 * Copyright (C) 2001 REINER SCT
5 * Author: Matthias Bruestle
6 *
7 * Contact: support@reiner-sct.com (see MAINTAINERS)
8 *
9 * This program is largely derived from work by the linux-usb group
10 * and associated source files. Please see the usb/serial files for
11 * individual credits and copyrights.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
19 * patience.
20 *
21 * In case of problems, please write to the contact e-mail address
22 * mentioned above.
23 *
24 * Please note that later models of the cyberjack reader family are
25 * supported by a libusb-based userspace device driver.
26 *
27 * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
28 */
29
30
31#include <linux/kernel.h>
32#include <linux/errno.h>
33#include <linux/init.h>
34#include <linux/slab.h>
35#include <linux/tty.h>
36#include <linux/tty_driver.h>
37#include <linux/tty_flip.h>
38#include <linux/module.h>
39#include <linux/spinlock.h>
40#include <linux/uaccess.h>
41#include <linux/usb.h>
42#include <linux/usb/serial.h>
43
44#define CYBERJACK_LOCAL_BUF_SIZE 32
45
46static bool debug;
47
48/*
49 * Version Information
50 */
51#define DRIVER_VERSION "v1.01"
52#define DRIVER_AUTHOR "Matthias Bruestle"
53#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
54
55
56#define CYBERJACK_VENDOR_ID 0x0C4B
57#define CYBERJACK_PRODUCT_ID 0x0100
58
59/* Function prototypes */
60static int cyberjack_startup(struct usb_serial *serial);
61static void cyberjack_disconnect(struct usb_serial *serial);
62static void cyberjack_release(struct usb_serial *serial);
63static int cyberjack_open(struct tty_struct *tty,
64 struct usb_serial_port *port);
65static void cyberjack_close(struct usb_serial_port *port);
66static int cyberjack_write(struct tty_struct *tty,
67 struct usb_serial_port *port, const unsigned char *buf, int count);
68static int cyberjack_write_room(struct tty_struct *tty);
69static void cyberjack_read_int_callback(struct urb *urb);
70static void cyberjack_read_bulk_callback(struct urb *urb);
71static void cyberjack_write_bulk_callback(struct urb *urb);
72
73static const struct usb_device_id id_table[] = {
74 { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
75 { } /* Terminating entry */
76};
77
78MODULE_DEVICE_TABLE(usb, id_table);
79
80static struct usb_serial_driver cyberjack_device = {
81 .driver = {
82 .owner = THIS_MODULE,
83 .name = "cyberjack",
84 },
85 .description = "Reiner SCT Cyberjack USB card reader",
86 .id_table = id_table,
87 .num_ports = 1,
88 .attach = cyberjack_startup,
89 .disconnect = cyberjack_disconnect,
90 .release = cyberjack_release,
91 .open = cyberjack_open,
92 .close = cyberjack_close,
93 .write = cyberjack_write,
94 .write_room = cyberjack_write_room,
95 .read_int_callback = cyberjack_read_int_callback,
96 .read_bulk_callback = cyberjack_read_bulk_callback,
97 .write_bulk_callback = cyberjack_write_bulk_callback,
98};
99
100static struct usb_serial_driver * const serial_drivers[] = {
101 &cyberjack_device, NULL
102};
103
104struct cyberjack_private {
105 spinlock_t lock; /* Lock for SMP */
106 short rdtodo; /* Bytes still to read */
107 unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */
108 short wrfilled; /* Overall data size we already got */
109 short wrsent; /* Data already sent */
110};
111
112/* do some startup allocations not currently performed by usb_serial_probe() */
113static int cyberjack_startup(struct usb_serial *serial)
114{
115 struct cyberjack_private *priv;
116 int i;
117
118 /* allocate the private data structure */
119 priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
120 if (!priv)
121 return -ENOMEM;
122
123 /* set initial values */
124 spin_lock_init(&priv->lock);
125 priv->rdtodo = 0;
126 priv->wrfilled = 0;
127 priv->wrsent = 0;
128 usb_set_serial_port_data(serial->port[0], priv);
129
130 init_waitqueue_head(&serial->port[0]->write_wait);
131
132 for (i = 0; i < serial->num_ports; ++i) {
133 int result;
134 result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
135 GFP_KERNEL);
136 if (result)
137 dev_err(&serial->dev->dev,
138 "usb_submit_urb(read int) failed\n");
139 dbg("%s - usb_submit_urb(int urb)", __func__);
140 }
141
142 return 0;
143}
144
145static void cyberjack_disconnect(struct usb_serial *serial)
146{
147 int i;
148
149 for (i = 0; i < serial->num_ports; ++i)
150 usb_kill_urb(serial->port[i]->interrupt_in_urb);
151}
152
153static void cyberjack_release(struct usb_serial *serial)
154{
155 int i;
156
157 for (i = 0; i < serial->num_ports; ++i) {
158 /* My special items, the standard routines free my urbs */
159 kfree(usb_get_serial_port_data(serial->port[i]));
160 }
161}
162
163static int cyberjack_open(struct tty_struct *tty,
164 struct usb_serial_port *port)
165{
166 struct cyberjack_private *priv;
167 unsigned long flags;
168 int result = 0;
169
170 dbg("%s - usb_clear_halt", __func__);
171 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
172
173 priv = usb_get_serial_port_data(port);
174 spin_lock_irqsave(&priv->lock, flags);
175 priv->rdtodo = 0;
176 priv->wrfilled = 0;
177 priv->wrsent = 0;
178 spin_unlock_irqrestore(&priv->lock, flags);
179
180 return result;
181}
182
183static void cyberjack_close(struct usb_serial_port *port)
184{
185 if (port->serial->dev) {
186 /* shutdown any bulk reads that might be going on */
187 usb_kill_urb(port->write_urb);
188 usb_kill_urb(port->read_urb);
189 }
190}
191
192static int cyberjack_write(struct tty_struct *tty,
193 struct usb_serial_port *port, const unsigned char *buf, int count)
194{
195 struct cyberjack_private *priv = usb_get_serial_port_data(port);
196 unsigned long flags;
197 int result;
198 int wrexpected;
199
200 if (count == 0) {
201 dbg("%s - write request of 0 bytes", __func__);
202 return 0;
203 }
204
205 if (!test_and_clear_bit(0, &port->write_urbs_free)) {
206 dbg("%s - already writing", __func__);
207 return 0;
208 }
209
210 spin_lock_irqsave(&priv->lock, flags);
211
212 if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
213 /* To much data for buffer. Reset buffer. */
214 priv->wrfilled = 0;
215 spin_unlock_irqrestore(&priv->lock, flags);
216 set_bit(0, &port->write_urbs_free);
217 return 0;
218 }
219
220 /* Copy data */
221 memcpy(priv->wrbuf + priv->wrfilled, buf, count);
222
223 usb_serial_debug_data(debug, &port->dev, __func__, count,
224 priv->wrbuf + priv->wrfilled);
225 priv->wrfilled += count;
226
227 if (priv->wrfilled >= 3) {
228 wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
229 dbg("%s - expected data: %d", __func__, wrexpected);
230 } else
231 wrexpected = sizeof(priv->wrbuf);
232
233 if (priv->wrfilled >= wrexpected) {
234 /* We have enough data to begin transmission */
235 int length;
236
237 dbg("%s - transmitting data (frame 1)", __func__);
238 length = (wrexpected > port->bulk_out_size) ?
239 port->bulk_out_size : wrexpected;
240
241 memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
242 priv->wrsent = length;
243
244 /* set up our urb */
245 port->write_urb->transfer_buffer_length = length;
246
247 /* send the data out the bulk port */
248 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
249 if (result) {
250 dev_err(&port->dev,
251 "%s - failed submitting write urb, error %d",
252 __func__, result);
253 /* Throw away data. No better idea what to do with it. */
254 priv->wrfilled = 0;
255 priv->wrsent = 0;
256 spin_unlock_irqrestore(&priv->lock, flags);
257 set_bit(0, &port->write_urbs_free);
258 return 0;
259 }
260
261 dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
262 dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
263
264 if (priv->wrsent >= priv->wrfilled) {
265 dbg("%s - buffer cleaned", __func__);
266 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
267 priv->wrfilled = 0;
268 priv->wrsent = 0;
269 }
270 }
271
272 spin_unlock_irqrestore(&priv->lock, flags);
273
274 return count;
275}
276
277static int cyberjack_write_room(struct tty_struct *tty)
278{
279 /* FIXME: .... */
280 return CYBERJACK_LOCAL_BUF_SIZE;
281}
282
283static void cyberjack_read_int_callback(struct urb *urb)
284{
285 struct usb_serial_port *port = urb->context;
286 struct cyberjack_private *priv = usb_get_serial_port_data(port);
287 unsigned char *data = urb->transfer_buffer;
288 int status = urb->status;
289 int result;
290
291 /* the urb might have been killed. */
292 if (status)
293 return;
294
295 usb_serial_debug_data(debug, &port->dev, __func__,
296 urb->actual_length, data);
297
298 /* React only to interrupts signaling a bulk_in transfer */
299 if (urb->actual_length == 4 && data[0] == 0x01) {
300 short old_rdtodo;
301
302 /* This is a announcement of coming bulk_ins. */
303 unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
304
305 spin_lock(&priv->lock);
306
307 old_rdtodo = priv->rdtodo;
308
309 if (old_rdtodo + size < old_rdtodo) {
310 dbg("To many bulk_in urbs to do.");
311 spin_unlock(&priv->lock);
312 goto resubmit;
313 }
314
315 /* "+=" is probably more fault tollerant than "=" */
316 priv->rdtodo += size;
317
318 dbg("%s - rdtodo: %d", __func__, priv->rdtodo);
319
320 spin_unlock(&priv->lock);
321
322 if (!old_rdtodo) {
323 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
324 if (result)
325 dev_err(&port->dev, "%s - failed resubmitting "
326 "read urb, error %d\n",
327 __func__, result);
328 dbg("%s - usb_submit_urb(read urb)", __func__);
329 }
330 }
331
332resubmit:
333 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
334 if (result)
335 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
336 dbg("%s - usb_submit_urb(int urb)", __func__);
337}
338
339static void cyberjack_read_bulk_callback(struct urb *urb)
340{
341 struct usb_serial_port *port = urb->context;
342 struct cyberjack_private *priv = usb_get_serial_port_data(port);
343 struct tty_struct *tty;
344 unsigned char *data = urb->transfer_buffer;
345 short todo;
346 int result;
347 int status = urb->status;
348
349 usb_serial_debug_data(debug, &port->dev, __func__,
350 urb->actual_length, data);
351 if (status) {
352 dbg("%s - nonzero read bulk status received: %d",
353 __func__, status);
354 return;
355 }
356
357 tty = tty_port_tty_get(&port->port);
358 if (!tty) {
359 dbg("%s - ignoring since device not open", __func__);
360 return;
361 }
362 if (urb->actual_length) {
363 tty_insert_flip_string(tty, data, urb->actual_length);
364 tty_flip_buffer_push(tty);
365 }
366 tty_kref_put(tty);
367
368 spin_lock(&priv->lock);
369
370 /* Reduce urbs to do by one. */
371 priv->rdtodo -= urb->actual_length;
372 /* Just to be sure */
373 if (priv->rdtodo < 0)
374 priv->rdtodo = 0;
375 todo = priv->rdtodo;
376
377 spin_unlock(&priv->lock);
378
379 dbg("%s - rdtodo: %d", __func__, todo);
380
381 /* Continue to read if we have still urbs to do. */
382 if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
383 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
384 if (result)
385 dev_err(&port->dev, "%s - failed resubmitting read "
386 "urb, error %d\n", __func__, result);
387 dbg("%s - usb_submit_urb(read urb)", __func__);
388 }
389}
390
391static void cyberjack_write_bulk_callback(struct urb *urb)
392{
393 struct usb_serial_port *port = urb->context;
394 struct cyberjack_private *priv = usb_get_serial_port_data(port);
395 int status = urb->status;
396
397 set_bit(0, &port->write_urbs_free);
398 if (status) {
399 dbg("%s - nonzero write bulk status received: %d",
400 __func__, status);
401 return;
402 }
403
404 spin_lock(&priv->lock);
405
406 /* only do something if we have more data to send */
407 if (priv->wrfilled) {
408 int length, blksize, result;
409
410 dbg("%s - transmitting data (frame n)", __func__);
411
412 length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
413 port->bulk_out_size : (priv->wrfilled - priv->wrsent);
414
415 memcpy(port->write_urb->transfer_buffer,
416 priv->wrbuf + priv->wrsent, length);
417 priv->wrsent += length;
418
419 /* set up our urb */
420 port->write_urb->transfer_buffer_length = length;
421
422 /* send the data out the bulk port */
423 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
424 if (result) {
425 dev_err(&port->dev,
426 "%s - failed submitting write urb, error %d\n",
427 __func__, result);
428 /* Throw away data. No better idea what to do with it. */
429 priv->wrfilled = 0;
430 priv->wrsent = 0;
431 goto exit;
432 }
433
434 dbg("%s - priv->wrsent=%d", __func__, priv->wrsent);
435 dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled);
436
437 blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
438
439 if (priv->wrsent >= priv->wrfilled ||
440 priv->wrsent >= blksize) {
441 dbg("%s - buffer cleaned", __func__);
442 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
443 priv->wrfilled = 0;
444 priv->wrsent = 0;
445 }
446 }
447
448exit:
449 spin_unlock(&priv->lock);
450 usb_serial_port_softint(port);
451}
452
453module_usb_serial_driver(serial_drivers, id_table);
454
455MODULE_AUTHOR(DRIVER_AUTHOR);
456MODULE_DESCRIPTION(DRIVER_DESC);
457MODULE_VERSION(DRIVER_VERSION);
458MODULE_LICENSE("GPL");
459
460module_param(debug, bool, S_IRUGO | S_IWUSR);
461MODULE_PARM_DESC(debug, "Debug enabled or not");