Loading...
1/*
2 * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC
3 *
4 * Copyright (c) 2011 Jan Andersson <jan@gaisler.com>
5 *
6 * This file is based on UHCI PCI HCD:
7 * (C) Copyright 1999 Linus Torvalds
8 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
9 * (C) Copyright 1999 Randy Dunlap
10 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
11 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
12 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
13 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
14 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
15 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
16 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
17 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
18 */
19
20#include <linux/of_irq.h>
21#include <linux/of_address.h>
22#include <linux/of_platform.h>
23
24static int uhci_grlib_init(struct usb_hcd *hcd)
25{
26 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
27
28 /*
29 * Probe to determine the endianness of the controller.
30 * We know that bit 7 of the PORTSC1 register is always set
31 * and bit 15 is always clear. If uhci_readw() yields a value
32 * with bit 7 (0x80) turned on then the current little-endian
33 * setting is correct. Otherwise we assume the value was
34 * byte-swapped; hence the register interface and presumably
35 * also the descriptors are big-endian.
36 */
37 if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) {
38 uhci->big_endian_mmio = 1;
39 uhci->big_endian_desc = 1;
40 }
41
42 uhci->rh_numports = uhci_count_ports(hcd);
43
44 /* Set up pointers to to generic functions */
45 uhci->reset_hc = uhci_generic_reset_hc;
46 uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
47 /* No special actions need to be taken for the functions below */
48 uhci->configure_hc = NULL;
49 uhci->resume_detect_interrupts_are_broken = NULL;
50 uhci->global_suspend_mode_is_broken = NULL;
51
52 /* Reset if the controller isn't already safely quiescent. */
53 check_and_reset_hc(uhci);
54 return 0;
55}
56
57static const struct hc_driver uhci_grlib_hc_driver = {
58 .description = hcd_name,
59 .product_desc = "GRLIB GRUSBHC UHCI Host Controller",
60 .hcd_priv_size = sizeof(struct uhci_hcd),
61
62 /* Generic hardware linkage */
63 .irq = uhci_irq,
64 .flags = HCD_MEMORY | HCD_USB11,
65
66 /* Basic lifecycle operations */
67 .reset = uhci_grlib_init,
68 .start = uhci_start,
69#ifdef CONFIG_PM
70 .pci_suspend = NULL,
71 .pci_resume = NULL,
72 .bus_suspend = uhci_rh_suspend,
73 .bus_resume = uhci_rh_resume,
74#endif
75 .stop = uhci_stop,
76
77 .urb_enqueue = uhci_urb_enqueue,
78 .urb_dequeue = uhci_urb_dequeue,
79
80 .endpoint_disable = uhci_hcd_endpoint_disable,
81 .get_frame_number = uhci_hcd_get_frame_number,
82
83 .hub_status_data = uhci_hub_status_data,
84 .hub_control = uhci_hub_control,
85};
86
87
88static int __devinit uhci_hcd_grlib_probe(struct platform_device *op)
89{
90 struct device_node *dn = op->dev.of_node;
91 struct usb_hcd *hcd;
92 struct uhci_hcd *uhci = NULL;
93 struct resource res;
94 int irq;
95 int rv;
96
97 if (usb_disabled())
98 return -ENODEV;
99
100 dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n");
101
102 rv = of_address_to_resource(dn, 0, &res);
103 if (rv)
104 return rv;
105
106 /* usb_create_hcd requires dma_mask != NULL */
107 op->dev.dma_mask = &op->dev.coherent_dma_mask;
108 hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev,
109 "GRUSBHC UHCI USB");
110 if (!hcd)
111 return -ENOMEM;
112
113 hcd->rsrc_start = res.start;
114 hcd->rsrc_len = resource_size(&res);
115
116 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
117 printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
118 rv = -EBUSY;
119 goto err_rmr;
120 }
121
122 irq = irq_of_parse_and_map(dn, 0);
123 if (irq == NO_IRQ) {
124 printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
125 rv = -EBUSY;
126 goto err_irq;
127 }
128
129 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
130 if (!hcd->regs) {
131 printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
132 rv = -ENOMEM;
133 goto err_ioremap;
134 }
135
136 uhci = hcd_to_uhci(hcd);
137
138 uhci->regs = hcd->regs;
139
140 rv = usb_add_hcd(hcd, irq, 0);
141 if (rv)
142 goto err_uhci;
143
144 return 0;
145
146err_uhci:
147 iounmap(hcd->regs);
148err_ioremap:
149 irq_dispose_mapping(irq);
150err_irq:
151 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
152err_rmr:
153 usb_put_hcd(hcd);
154
155 return rv;
156}
157
158static int uhci_hcd_grlib_remove(struct platform_device *op)
159{
160 struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
161
162 dev_set_drvdata(&op->dev, NULL);
163
164 dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
165
166 usb_remove_hcd(hcd);
167
168 iounmap(hcd->regs);
169 irq_dispose_mapping(hcd->irq);
170 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
171
172 usb_put_hcd(hcd);
173
174 return 0;
175}
176
177/* Make sure the controller is quiescent and that we're not using it
178 * any more. This is mainly for the benefit of programs which, like kexec,
179 * expect the hardware to be idle: not doing DMA or generating IRQs.
180 *
181 * This routine may be called in a damaged or failing kernel. Hence we
182 * do not acquire the spinlock before shutting down the controller.
183 */
184static void uhci_hcd_grlib_shutdown(struct platform_device *op)
185{
186 struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
187
188 uhci_hc_died(hcd_to_uhci(hcd));
189}
190
191static const struct of_device_id uhci_hcd_grlib_of_match[] = {
192 { .name = "GAISLER_UHCI", },
193 { .name = "01_027", },
194 {},
195};
196MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match);
197
198
199static struct platform_driver uhci_grlib_driver = {
200 .probe = uhci_hcd_grlib_probe,
201 .remove = uhci_hcd_grlib_remove,
202 .shutdown = uhci_hcd_grlib_shutdown,
203 .driver = {
204 .name = "grlib-uhci",
205 .owner = THIS_MODULE,
206 .of_match_table = uhci_hcd_grlib_of_match,
207 },
208};
1/*
2 * UHCI HCD (Host Controller Driver) for GRLIB GRUSBHC
3 *
4 * Copyright (c) 2011 Jan Andersson <jan@gaisler.com>
5 *
6 * This file is based on UHCI PCI HCD:
7 * (C) Copyright 1999 Linus Torvalds
8 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
9 * (C) Copyright 1999 Randy Dunlap
10 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
11 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
12 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
13 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
14 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
15 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
16 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
17 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
18 */
19
20#include <linux/of_irq.h>
21#include <linux/of_address.h>
22#include <linux/of_platform.h>
23
24static int uhci_grlib_init(struct usb_hcd *hcd)
25{
26 struct uhci_hcd *uhci = hcd_to_uhci(hcd);
27
28 /*
29 * Probe to determine the endianness of the controller.
30 * We know that bit 7 of the PORTSC1 register is always set
31 * and bit 15 is always clear. If uhci_readw() yields a value
32 * with bit 7 (0x80) turned on then the current little-endian
33 * setting is correct. Otherwise we assume the value was
34 * byte-swapped; hence the register interface and presumably
35 * also the descriptors are big-endian.
36 */
37 if (!(uhci_readw(uhci, USBPORTSC1) & 0x80)) {
38 uhci->big_endian_mmio = 1;
39 uhci->big_endian_desc = 1;
40 }
41
42 uhci->rh_numports = uhci_count_ports(hcd);
43
44 /* Set up pointers to to generic functions */
45 uhci->reset_hc = uhci_generic_reset_hc;
46 uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
47 /* No special actions need to be taken for the functions below */
48 uhci->configure_hc = NULL;
49 uhci->resume_detect_interrupts_are_broken = NULL;
50 uhci->global_suspend_mode_is_broken = NULL;
51
52 /* Reset if the controller isn't already safely quiescent. */
53 check_and_reset_hc(uhci);
54 return 0;
55}
56
57static const struct hc_driver uhci_grlib_hc_driver = {
58 .description = hcd_name,
59 .product_desc = "GRLIB GRUSBHC UHCI Host Controller",
60 .hcd_priv_size = sizeof(struct uhci_hcd),
61
62 /* Generic hardware linkage */
63 .irq = uhci_irq,
64 .flags = HCD_MEMORY | HCD_USB11,
65
66 /* Basic lifecycle operations */
67 .reset = uhci_grlib_init,
68 .start = uhci_start,
69#ifdef CONFIG_PM
70 .pci_suspend = NULL,
71 .pci_resume = NULL,
72 .bus_suspend = uhci_rh_suspend,
73 .bus_resume = uhci_rh_resume,
74#endif
75 .stop = uhci_stop,
76
77 .urb_enqueue = uhci_urb_enqueue,
78 .urb_dequeue = uhci_urb_dequeue,
79
80 .endpoint_disable = uhci_hcd_endpoint_disable,
81 .get_frame_number = uhci_hcd_get_frame_number,
82
83 .hub_status_data = uhci_hub_status_data,
84 .hub_control = uhci_hub_control,
85};
86
87
88static int __devinit uhci_hcd_grlib_probe(struct platform_device *op)
89{
90 struct device_node *dn = op->dev.of_node;
91 struct usb_hcd *hcd;
92 struct uhci_hcd *uhci = NULL;
93 struct resource res;
94 int irq;
95 int rv;
96
97 if (usb_disabled())
98 return -ENODEV;
99
100 dev_dbg(&op->dev, "initializing GRUSBHC UHCI USB Controller\n");
101
102 rv = of_address_to_resource(dn, 0, &res);
103 if (rv)
104 return rv;
105
106 /* usb_create_hcd requires dma_mask != NULL */
107 op->dev.dma_mask = &op->dev.coherent_dma_mask;
108 hcd = usb_create_hcd(&uhci_grlib_hc_driver, &op->dev,
109 "GRUSBHC UHCI USB");
110 if (!hcd)
111 return -ENOMEM;
112
113 hcd->rsrc_start = res.start;
114 hcd->rsrc_len = resource_size(&res);
115
116 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
117 printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
118 rv = -EBUSY;
119 goto err_rmr;
120 }
121
122 irq = irq_of_parse_and_map(dn, 0);
123 if (irq == NO_IRQ) {
124 printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
125 rv = -EBUSY;
126 goto err_irq;
127 }
128
129 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
130 if (!hcd->regs) {
131 printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
132 rv = -ENOMEM;
133 goto err_ioremap;
134 }
135
136 uhci = hcd_to_uhci(hcd);
137
138 uhci->regs = hcd->regs;
139
140 rv = usb_add_hcd(hcd, irq, 0);
141 if (rv)
142 goto err_uhci;
143
144 return 0;
145
146err_uhci:
147 iounmap(hcd->regs);
148err_ioremap:
149 irq_dispose_mapping(irq);
150err_irq:
151 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
152err_rmr:
153 usb_put_hcd(hcd);
154
155 return rv;
156}
157
158static int uhci_hcd_grlib_remove(struct platform_device *op)
159{
160 struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
161
162 dev_set_drvdata(&op->dev, NULL);
163
164 dev_dbg(&op->dev, "stopping GRLIB GRUSBHC UHCI USB Controller\n");
165
166 usb_remove_hcd(hcd);
167
168 iounmap(hcd->regs);
169 irq_dispose_mapping(hcd->irq);
170 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
171
172 usb_put_hcd(hcd);
173
174 return 0;
175}
176
177/* Make sure the controller is quiescent and that we're not using it
178 * any more. This is mainly for the benefit of programs which, like kexec,
179 * expect the hardware to be idle: not doing DMA or generating IRQs.
180 *
181 * This routine may be called in a damaged or failing kernel. Hence we
182 * do not acquire the spinlock before shutting down the controller.
183 */
184static void uhci_hcd_grlib_shutdown(struct platform_device *op)
185{
186 struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
187
188 uhci_hc_died(hcd_to_uhci(hcd));
189}
190
191static const struct of_device_id uhci_hcd_grlib_of_match[] = {
192 { .name = "GAISLER_UHCI", },
193 { .name = "01_027", },
194 {},
195};
196MODULE_DEVICE_TABLE(of, uhci_hcd_grlib_of_match);
197
198
199static struct platform_driver uhci_grlib_driver = {
200 .probe = uhci_hcd_grlib_probe,
201 .remove = uhci_hcd_grlib_remove,
202 .shutdown = uhci_hcd_grlib_shutdown,
203 .driver = {
204 .name = "grlib-uhci",
205 .owner = THIS_MODULE,
206 .of_match_table = uhci_hcd_grlib_of_match,
207 },
208};