Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1/* 82596.c: A generic 82596 ethernet driver for linux. */
   2/*
   3   Based on Apricot.c
   4   Written 1994 by Mark Evans.
   5   This driver is for the Apricot 82596 bus-master interface
   6
   7   Modularised 12/94 Mark Evans
   8
   9
  10   Modified to support the 82596 ethernet chips on 680x0 VME boards.
  11   by Richard Hirst <richard@sleepie.demon.co.uk>
  12   Renamed to be 82596.c
  13
  14   980825:  Changed to receive directly in to sk_buffs which are
  15   allocated at open() time.  Eliminates copy on incoming frames
  16   (small ones are still copied).  Shared data now held in a
  17   non-cached page, so we can run on 68060 in copyback mode.
  18
  19   TBD:
  20   * look at deferring rx frames rather than discarding (as per tulip)
  21   * handle tx ring full as per tulip
  22   * performance test to tune rx_copybreak
  23
  24   Most of my modifications relate to the braindead big-endian
  25   implementation by Intel.  When the i596 is operating in
  26   'big-endian' mode, it thinks a 32 bit value of 0x12345678
  27   should be stored as 0x56781234.  This is a real pain, when
  28   you have linked lists which are shared by the 680x0 and the
  29   i596.
  30
  31   Driver skeleton
  32   Written 1993 by Donald Becker.
  33   Copyright 1993 United States Government as represented by the Director,
  34   National Security Agency. This software may only be used and distributed
  35   according to the terms of the GNU General Public License as modified by SRC,
  36   incorporated herein by reference.
  37
  38   The author may be reached as becker@scyld.com, or C/O
  39   Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
  40
  41 */
  42
  43#include <linux/module.h>
  44#include <linux/kernel.h>
  45#include <linux/string.h>
  46#include <linux/errno.h>
  47#include <linux/ioport.h>
  48#include <linux/interrupt.h>
  49#include <linux/delay.h>
  50#include <linux/netdevice.h>
  51#include <linux/etherdevice.h>
  52#include <linux/skbuff.h>
  53#include <linux/init.h>
  54#include <linux/bitops.h>
  55#include <linux/gfp.h>
  56
  57#include <asm/io.h>
  58#include <asm/dma.h>
  59#include <asm/pgtable.h>
  60#include <asm/cacheflush.h>
  61
  62static char version[] __initdata =
  63	"82596.c $Revision: 1.5 $\n";
  64
  65#define DRV_NAME	"82596"
  66
  67/* DEBUG flags
  68 */
  69
  70#define DEB_INIT	0x0001
  71#define DEB_PROBE	0x0002
  72#define DEB_SERIOUS	0x0004
  73#define DEB_ERRORS	0x0008
  74#define DEB_MULTI	0x0010
  75#define DEB_TDR		0x0020
  76#define DEB_OPEN	0x0040
  77#define DEB_RESET	0x0080
  78#define DEB_ADDCMD	0x0100
  79#define DEB_STATUS	0x0200
  80#define DEB_STARTTX	0x0400
  81#define DEB_RXADDR	0x0800
  82#define DEB_TXADDR	0x1000
  83#define DEB_RXFRAME	0x2000
  84#define DEB_INTS	0x4000
  85#define DEB_STRUCT	0x8000
  86#define DEB_ANY		0xffff
  87
  88
  89#define DEB(x,y)	if (i596_debug & (x)) y
  90
  91
  92#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE)
  93#define ENABLE_MVME16x_NET
  94#endif
  95#if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE)
  96#define ENABLE_BVME6000_NET
  97#endif
  98#if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE)
  99#define ENABLE_APRICOT
 100#endif
 101
 102#ifdef ENABLE_MVME16x_NET
 103#include <asm/mvme16xhw.h>
 104#endif
 105#ifdef ENABLE_BVME6000_NET
 106#include <asm/bvme6000hw.h>
 107#endif
 108
 109/*
 110 * Define various macros for Channel Attention, word swapping etc., dependent
 111 * on architecture.  MVME and BVME are 680x0 based, otherwise it is Intel.
 112 */
 113
 114#ifdef __mc68000__
 115#define WSWAPrfd(x)  ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 116#define WSWAPrbd(x)  ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 117#define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16)))
 118#define WSWAPscb(x)  ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 119#define WSWAPcmd(x)  ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 120#define WSWAPtbd(x)  ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 121#define WSWAPchar(x) ((char *)            (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 122#define ISCP_BUSY	0x00010000
 123#define MACH_IS_APRICOT	0
 124#else
 125#define WSWAPrfd(x)     ((struct i596_rfd *)((long)x))
 126#define WSWAPrbd(x)     ((struct i596_rbd *)((long)x))
 127#define WSWAPiscp(x)    ((struct i596_iscp *)((long)x))
 128#define WSWAPscb(x)     ((struct i596_scb *)((long)x))
 129#define WSWAPcmd(x)     ((struct i596_cmd *)((long)x))
 130#define WSWAPtbd(x)     ((struct i596_tbd *)((long)x))
 131#define WSWAPchar(x)    ((char *)((long)x))
 132#define ISCP_BUSY	0x0001
 133#define MACH_IS_APRICOT	1
 134#endif
 135
 136/*
 137 * The MPU_PORT command allows direct access to the 82596. With PORT access
 138 * the following commands are available (p5-18). The 32-bit port command
 139 * must be word-swapped with the most significant word written first.
 140 * This only applies to VME boards.
 141 */
 142#define PORT_RESET		0x00	/* reset 82596 */
 143#define PORT_SELFTEST		0x01	/* selftest */
 144#define PORT_ALTSCP		0x02	/* alternate SCB address */
 145#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
 146
 147static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
 148
 149MODULE_AUTHOR("Richard Hirst");
 150MODULE_DESCRIPTION("i82596 driver");
 151MODULE_LICENSE("GPL");
 152
 153module_param(i596_debug, int, 0);
 154MODULE_PARM_DESC(i596_debug, "i82596 debug mask");
 155
 156
 157/* Copy frames shorter than rx_copybreak, otherwise pass on up in
 158 * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
 159 */
 160static int rx_copybreak = 100;
 161
 162#define PKT_BUF_SZ	1536
 163#define MAX_MC_CNT	64
 164
 165#define I596_TOTAL_SIZE 17
 166
 167#define I596_NULL ((void *)0xffffffff)
 168
 169#define CMD_EOL		0x8000	/* The last command of the list, stop. */
 170#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
 171#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
 172
 173#define CMD_FLEX	0x0008	/* Enable flexible memory model */
 174
 175enum commands {
 176	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
 177	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
 178};
 179
 180#define STAT_C		0x8000	/* Set to 0 after execution */
 181#define STAT_B		0x4000	/* Command being executed */
 182#define STAT_OK		0x2000	/* Command executed ok */
 183#define STAT_A		0x1000	/* Command aborted */
 184
 185#define	 CUC_START	0x0100
 186#define	 CUC_RESUME	0x0200
 187#define	 CUC_SUSPEND    0x0300
 188#define	 CUC_ABORT	0x0400
 189#define	 RX_START	0x0010
 190#define	 RX_RESUME	0x0020
 191#define	 RX_SUSPEND	0x0030
 192#define	 RX_ABORT	0x0040
 193
 194#define TX_TIMEOUT	(HZ/20)
 195
 196
 197struct i596_reg {
 198	unsigned short porthi;
 199	unsigned short portlo;
 200	unsigned long ca;
 201};
 202
 203#define EOF		0x8000
 204#define SIZE_MASK	0x3fff
 205
 206struct i596_tbd {
 207	unsigned short size;
 208	unsigned short pad;
 209	struct i596_tbd *next;
 210	char *data;
 211};
 212
 213/* The command structure has two 'next' pointers; v_next is the address of
 214 * the next command as seen by the CPU, b_next is the address of the next
 215 * command as seen by the 82596.  The b_next pointer, as used by the 82596
 216 * always references the status field of the next command, rather than the
 217 * v_next field, because the 82596 is unaware of v_next.  It may seem more
 218 * logical to put v_next at the end of the structure, but we cannot do that
 219 * because the 82596 expects other fields to be there, depending on command
 220 * type.
 221 */
 222
 223struct i596_cmd {
 224	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
 225	unsigned short status;
 226	unsigned short command;
 227	struct i596_cmd *b_next;	/* Address from i596 viewpoint */
 228};
 229
 230struct tx_cmd {
 231	struct i596_cmd cmd;
 232	struct i596_tbd *tbd;
 233	unsigned short size;
 234	unsigned short pad;
 235	struct sk_buff *skb;	/* So we can free it after tx */
 236};
 237
 238struct tdr_cmd {
 239	struct i596_cmd cmd;
 240	unsigned short status;
 241	unsigned short pad;
 242};
 243
 244struct mc_cmd {
 245	struct i596_cmd cmd;
 246	short mc_cnt;
 247	char mc_addrs[MAX_MC_CNT*6];
 248};
 249
 250struct sa_cmd {
 251	struct i596_cmd cmd;
 252	char eth_addr[8];
 253};
 254
 255struct cf_cmd {
 256	struct i596_cmd cmd;
 257	char i596_config[16];
 258};
 259
 260struct i596_rfd {
 261	unsigned short stat;
 262	unsigned short cmd;
 263	struct i596_rfd *b_next;	/* Address from i596 viewpoint */
 264	struct i596_rbd *rbd;
 265	unsigned short count;
 266	unsigned short size;
 267	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
 268	struct i596_rfd *v_prev;
 269};
 270
 271struct i596_rbd {
 272    unsigned short count;
 273    unsigned short zero1;
 274    struct i596_rbd *b_next;
 275    unsigned char *b_data;		/* Address from i596 viewpoint */
 276    unsigned short size;
 277    unsigned short zero2;
 278    struct sk_buff *skb;
 279    struct i596_rbd *v_next;
 280    struct i596_rbd *b_addr;		/* This rbd addr from i596 view */
 281    unsigned char *v_data;		/* Address from CPUs viewpoint */
 282};
 283
 284#define TX_RING_SIZE 64
 285#define RX_RING_SIZE 16
 286
 287struct i596_scb {
 288	unsigned short status;
 289	unsigned short command;
 290	struct i596_cmd *cmd;
 291	struct i596_rfd *rfd;
 292	unsigned long crc_err;
 293	unsigned long align_err;
 294	unsigned long resource_err;
 295	unsigned long over_err;
 296	unsigned long rcvdt_err;
 297	unsigned long short_err;
 298	unsigned short t_on;
 299	unsigned short t_off;
 300};
 301
 302struct i596_iscp {
 303	unsigned long stat;
 304	struct i596_scb *scb;
 305};
 306
 307struct i596_scp {
 308	unsigned long sysbus;
 309	unsigned long pad;
 310	struct i596_iscp *iscp;
 311};
 312
 313struct i596_private {
 314	volatile struct i596_scp scp;
 315	volatile struct i596_iscp iscp;
 316	volatile struct i596_scb scb;
 317	struct sa_cmd sa_cmd;
 318	struct cf_cmd cf_cmd;
 319	struct tdr_cmd tdr_cmd;
 320	struct mc_cmd mc_cmd;
 321	unsigned long stat;
 322	int last_restart __attribute__((aligned(4)));
 323	struct i596_rfd *rfd_head;
 324	struct i596_rbd *rbd_head;
 325	struct i596_cmd *cmd_tail;
 326	struct i596_cmd *cmd_head;
 327	int cmd_backlog;
 328	unsigned long last_cmd;
 329	struct i596_rfd rfds[RX_RING_SIZE];
 330	struct i596_rbd rbds[RX_RING_SIZE];
 331	struct tx_cmd tx_cmds[TX_RING_SIZE];
 332	struct i596_tbd tbds[TX_RING_SIZE];
 333	int next_tx_cmd;
 334	spinlock_t lock;
 335};
 336
 337static char init_setup[] =
 338{
 339	0x8E,			/* length, prefetch on */
 340	0xC8,			/* fifo to 8, monitor off */
 341#ifdef CONFIG_VME
 342	0xc0,			/* don't save bad frames */
 343#else
 344	0x80,			/* don't save bad frames */
 345#endif
 346	0x2E,			/* No source address insertion, 8 byte preamble */
 347	0x00,			/* priority and backoff defaults */
 348	0x60,			/* interframe spacing */
 349	0x00,			/* slot time LSB */
 350	0xf2,			/* slot time and retries */
 351	0x00,			/* promiscuous mode */
 352	0x00,			/* collision detect */
 353	0x40,			/* minimum frame length */
 354	0xff,
 355	0x00,
 356	0x7f /*  *multi IA */ };
 357
 358static int i596_open(struct net_device *dev);
 359static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
 360static irqreturn_t i596_interrupt(int irq, void *dev_id);
 361static int i596_close(struct net_device *dev);
 362static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
 363static void i596_tx_timeout (struct net_device *dev);
 364static void print_eth(unsigned char *buf, char *str);
 365static void set_multicast_list(struct net_device *dev);
 366
 367static int rx_ring_size = RX_RING_SIZE;
 368static int ticks_limit = 25;
 369static int max_cmd_backlog = TX_RING_SIZE-1;
 370
 371
 372static inline void CA(struct net_device *dev)
 373{
 374#ifdef ENABLE_MVME16x_NET
 375	if (MACH_IS_MVME16x) {
 376		((struct i596_reg *) dev->base_addr)->ca = 1;
 377	}
 378#endif
 379#ifdef ENABLE_BVME6000_NET
 380	if (MACH_IS_BVME6000) {
 381		volatile u32 i;
 382
 383		i = *(volatile u32 *) (dev->base_addr);
 384	}
 385#endif
 386#ifdef ENABLE_APRICOT
 387	if (MACH_IS_APRICOT) {
 388		outw(0, (short) (dev->base_addr) + 4);
 389	}
 390#endif
 391}
 392
 393
 394static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x)
 395{
 396#ifdef ENABLE_MVME16x_NET
 397	if (MACH_IS_MVME16x) {
 398		struct i596_reg *p = (struct i596_reg *) (dev->base_addr);
 399		p->porthi = ((c) | (u32) (x)) & 0xffff;
 400		p->portlo = ((c) | (u32) (x)) >> 16;
 401	}
 402#endif
 403#ifdef ENABLE_BVME6000_NET
 404	if (MACH_IS_BVME6000) {
 405		u32 v = (u32) (c) | (u32) (x);
 406		v = ((u32) (v) << 16) | ((u32) (v) >> 16);
 407		*(volatile u32 *) dev->base_addr = v;
 408		udelay(1);
 409		*(volatile u32 *) dev->base_addr = v;
 410	}
 411#endif
 412}
 413
 414
 415static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
 416{
 417	while (--delcnt && lp->iscp.stat)
 418		udelay(10);
 419	if (!delcnt) {
 420		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
 421		     dev->name, str, lp->scb.status, lp->scb.command);
 422		return -1;
 423	}
 424	else
 425		return 0;
 426}
 427
 428
 429static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
 430{
 431	while (--delcnt && lp->scb.command)
 432		udelay(10);
 433	if (!delcnt) {
 434		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
 435		     dev->name, str, lp->scb.status, lp->scb.command);
 436		return -1;
 437	}
 438	else
 439		return 0;
 440}
 441
 442
 443static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str)
 444{
 445	volatile struct i596_cmd *c = cmd;
 446
 447	while (--delcnt && c->command)
 448		udelay(10);
 449	if (!delcnt) {
 450		printk(KERN_ERR "%s: %s.\n", dev->name, str);
 451		return -1;
 452	}
 453	else
 454		return 0;
 455}
 456
 457
 458static void i596_display_data(struct net_device *dev)
 459{
 460	struct i596_private *lp = dev->ml_priv;
 461	struct i596_cmd *cmd;
 462	struct i596_rfd *rfd;
 463	struct i596_rbd *rbd;
 464
 465	printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n",
 466	       &lp->scp, lp->scp.sysbus, lp->scp.iscp);
 467	printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n",
 468	       &lp->iscp, lp->iscp.stat, lp->iscp.scb);
 469	printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x,"
 470		" .cmd = %p, .rfd = %p\n",
 471	       &lp->scb, lp->scb.status, lp->scb.command,
 472		lp->scb.cmd, lp->scb.rfd);
 473	printk(KERN_ERR "   errors: crc %lx, align %lx, resource %lx,"
 474               " over %lx, rcvdt %lx, short %lx\n",
 475		lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
 476		lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
 477	cmd = lp->cmd_head;
 478	while (cmd != I596_NULL) {
 479		printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n",
 480		  cmd, cmd->status, cmd->command, cmd->b_next);
 481		cmd = cmd->v_next;
 482	}
 483	rfd = lp->rfd_head;
 484	printk(KERN_ERR "rfd_head = %p\n", rfd);
 485	do {
 486		printk(KERN_ERR "   %p .stat %04x, .cmd %04x, b_next %p, rbd %p,"
 487                        " count %04x\n",
 488			rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
 489			rfd->count);
 490		rfd = rfd->v_next;
 491	} while (rfd != lp->rfd_head);
 492	rbd = lp->rbd_head;
 493	printk(KERN_ERR "rbd_head = %p\n", rbd);
 494	do {
 495		printk(KERN_ERR "   %p .count %04x, b_next %p, b_data %p, size %04x\n",
 496			rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
 497		rbd = rbd->v_next;
 498	} while (rbd != lp->rbd_head);
 499}
 500
 501
 502#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
 503static irqreturn_t i596_error(int irq, void *dev_id)
 504{
 505	struct net_device *dev = dev_id;
 506#ifdef ENABLE_MVME16x_NET
 507	if (MACH_IS_MVME16x) {
 508		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 509
 510		pcc2[0x28] = 1;
 511		pcc2[0x2b] = 0x1d;
 512	}
 513#endif
 514#ifdef ENABLE_BVME6000_NET
 515	if (MACH_IS_BVME6000) {
 516		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 517
 518		*ethirq = 1;
 519		*ethirq = 3;
 520	}
 521#endif
 522	printk(KERN_ERR "%s: Error interrupt\n", dev->name);
 523	i596_display_data(dev);
 524	return IRQ_HANDLED;
 525}
 526#endif
 527
 528static inline void remove_rx_bufs(struct net_device *dev)
 529{
 530	struct i596_private *lp = dev->ml_priv;
 531	struct i596_rbd *rbd;
 532	int i;
 533
 534	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
 535		if (rbd->skb == NULL)
 536			break;
 537		dev_kfree_skb(rbd->skb);
 538		rbd->skb = NULL;
 539	}
 540}
 541
 542static inline int init_rx_bufs(struct net_device *dev)
 543{
 544	struct i596_private *lp = dev->ml_priv;
 545	int i;
 546	struct i596_rfd *rfd;
 547	struct i596_rbd *rbd;
 548
 549	/* First build the Receive Buffer Descriptor List */
 550
 551	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
 552		struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
 553
 554		if (skb == NULL) {
 555			remove_rx_bufs(dev);
 556			return -ENOMEM;
 557		}
 558
 559		rbd->v_next = rbd+1;
 560		rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1));
 561		rbd->b_addr = WSWAPrbd(virt_to_bus(rbd));
 562		rbd->skb = skb;
 563		rbd->v_data = skb->data;
 564		rbd->b_data = WSWAPchar(virt_to_bus(skb->data));
 565		rbd->size = PKT_BUF_SZ;
 566#ifdef __mc68000__
 567		cache_clear(virt_to_phys(skb->data), PKT_BUF_SZ);
 568#endif
 569	}
 570	lp->rbd_head = lp->rbds;
 571	rbd = lp->rbds + rx_ring_size - 1;
 572	rbd->v_next = lp->rbds;
 573	rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds));
 574
 575	/* Now build the Receive Frame Descriptor List */
 576
 577	for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
 578		rfd->rbd = I596_NULL;
 579		rfd->v_next = rfd+1;
 580		rfd->v_prev = rfd-1;
 581		rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1));
 582		rfd->cmd = CMD_FLEX;
 583	}
 584	lp->rfd_head = lp->rfds;
 585	lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
 586	rfd = lp->rfds;
 587	rfd->rbd = lp->rbd_head;
 588	rfd->v_prev = lp->rfds + rx_ring_size - 1;
 589	rfd = lp->rfds + rx_ring_size - 1;
 590	rfd->v_next = lp->rfds;
 591	rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds));
 592	rfd->cmd = CMD_EOL|CMD_FLEX;
 593
 594	return 0;
 595}
 596
 597
 598static void rebuild_rx_bufs(struct net_device *dev)
 599{
 600	struct i596_private *lp = dev->ml_priv;
 601	int i;
 602
 603	/* Ensure rx frame/buffer descriptors are tidy */
 604
 605	for (i = 0; i < rx_ring_size; i++) {
 606		lp->rfds[i].rbd = I596_NULL;
 607		lp->rfds[i].cmd = CMD_FLEX;
 608	}
 609	lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
 610	lp->rfd_head = lp->rfds;
 611	lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds));
 612	lp->rbd_head = lp->rbds;
 613	lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds));
 614}
 615
 616
 617static int init_i596_mem(struct net_device *dev)
 618{
 619	struct i596_private *lp = dev->ml_priv;
 620#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
 621	short ioaddr = dev->base_addr;
 622#endif
 623	unsigned long flags;
 624
 625	MPU_PORT(dev, PORT_RESET, NULL);
 626
 627	udelay(100);		/* Wait 100us - seems to help */
 628
 629#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
 630#ifdef ENABLE_MVME16x_NET
 631	if (MACH_IS_MVME16x) {
 632		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 633
 634		/* Disable all ints for now */
 635		pcc2[0x28] = 1;
 636		pcc2[0x2a] = 0x48;
 637		/* Following disables snooping.  Snooping is not required
 638		 * as we make appropriate use of non-cached pages for
 639		 * shared data, and cache_push/cache_clear.
 640		 */
 641		pcc2[0x2b] = 0x08;
 642	}
 643#endif
 644#ifdef ENABLE_BVME6000_NET
 645	if (MACH_IS_BVME6000) {
 646		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 647
 648		*ethirq = 1;
 649	}
 650#endif
 651
 652	/* change the scp address */
 653
 654	MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp));
 655
 656#elif defined(ENABLE_APRICOT)
 657
 658	{
 659		u32 scp = virt_to_bus(&lp->scp);
 660
 661		/* change the scp address */
 662		outw(0, ioaddr);
 663		outw(0, ioaddr);
 664		outb(4, ioaddr + 0xf);
 665		outw(scp | 2, ioaddr);
 666		outw(scp >> 16, ioaddr);
 667	}
 668#endif
 669
 670	lp->last_cmd = jiffies;
 671
 672#ifdef ENABLE_MVME16x_NET
 673	if (MACH_IS_MVME16x)
 674		lp->scp.sysbus = 0x00000054;
 675#endif
 676#ifdef ENABLE_BVME6000_NET
 677	if (MACH_IS_BVME6000)
 678		lp->scp.sysbus = 0x0000004c;
 679#endif
 680#ifdef ENABLE_APRICOT
 681	if (MACH_IS_APRICOT)
 682		lp->scp.sysbus = 0x00440000;
 683#endif
 684
 685	lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp));
 686	lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb));
 687	lp->iscp.stat = ISCP_BUSY;
 688	lp->cmd_backlog = 0;
 689
 690	lp->cmd_head = lp->scb.cmd = I596_NULL;
 691
 692#ifdef ENABLE_BVME6000_NET
 693	if (MACH_IS_BVME6000) {
 694		lp->scb.t_on  = 7 * 25;
 695		lp->scb.t_off = 1 * 25;
 696	}
 697#endif
 698
 699	DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
 700
 701#if defined(ENABLE_APRICOT)
 702	(void) inb(ioaddr + 0x10);
 703	outb(4, ioaddr + 0xf);
 704#endif
 705	CA(dev);
 706
 707	if (wait_istat(dev,lp,1000,"initialization timed out"))
 708		goto failed;
 709	DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
 710
 711	/* Ensure rx frame/buffer descriptors are tidy */
 712	rebuild_rx_bufs(dev);
 713	lp->scb.command = 0;
 714
 715#ifdef ENABLE_MVME16x_NET
 716	if (MACH_IS_MVME16x) {
 717		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
 718
 719		/* Enable ints, etc. now */
 720		pcc2[0x2a] = 0x55;	/* Edge sensitive */
 721		pcc2[0x2b] = 0x15;
 722	}
 723#endif
 724#ifdef ENABLE_BVME6000_NET
 725	if (MACH_IS_BVME6000) {
 726		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
 727
 728		*ethirq = 3;
 729	}
 730#endif
 731
 732
 733	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
 734	memcpy(lp->cf_cmd.i596_config, init_setup, 14);
 735	lp->cf_cmd.cmd.command = CmdConfigure;
 736	i596_add_cmd(dev, &lp->cf_cmd.cmd);
 737
 738	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
 739	memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6);
 740	lp->sa_cmd.cmd.command = CmdSASetup;
 741	i596_add_cmd(dev, &lp->sa_cmd.cmd);
 742
 743	DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
 744	lp->tdr_cmd.cmd.command = CmdTDR;
 745	i596_add_cmd(dev, &lp->tdr_cmd.cmd);
 746
 747	spin_lock_irqsave (&lp->lock, flags);
 748
 749	if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) {
 750		spin_unlock_irqrestore (&lp->lock, flags);
 751		goto failed;
 752	}
 753	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
 754	lp->scb.command = RX_START;
 755	CA(dev);
 756
 757	spin_unlock_irqrestore (&lp->lock, flags);
 758
 759	if (wait_cmd(dev,lp,1000,"RX_START not processed"))
 760		goto failed;
 761	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
 762	return 0;
 763
 764failed:
 765	printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name);
 766	MPU_PORT(dev, PORT_RESET, NULL);
 767	return -1;
 768}
 769
 770static inline int i596_rx(struct net_device *dev)
 771{
 772	struct i596_private *lp = dev->ml_priv;
 773	struct i596_rfd *rfd;
 774	struct i596_rbd *rbd;
 775	int frames = 0;
 776
 777	DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
 778			lp->rfd_head, lp->rbd_head));
 779
 780	rfd = lp->rfd_head;		/* Ref next frame to check */
 781
 782	while ((rfd->stat) & STAT_C) {	/* Loop while complete frames */
 783		if (rfd->rbd == I596_NULL)
 784			rbd = I596_NULL;
 785		else if (rfd->rbd == lp->rbd_head->b_addr)
 786			rbd = lp->rbd_head;
 787		else {
 788			printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name);
 789			/* XXX Now what? */
 790			rbd = I596_NULL;
 791		}
 792		DEB(DEB_RXFRAME, printk(KERN_DEBUG "  rfd %p, rfd.rbd %p, rfd.stat %04x\n",
 793			rfd, rfd->rbd, rfd->stat));
 794
 795		if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) {
 796			/* a good frame */
 797			int pkt_len = rbd->count & 0x3fff;
 798			struct sk_buff *skb = rbd->skb;
 799			int rx_in_place = 0;
 800
 801			DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
 802			frames++;
 803
 804			/* Check if the packet is long enough to just accept
 805			 * without copying to a properly sized skbuff.
 806			 */
 807
 808			if (pkt_len > rx_copybreak) {
 809				struct sk_buff *newskb;
 810
 811				/* Get fresh skbuff to replace filled one. */
 812				newskb = netdev_alloc_skb(dev, PKT_BUF_SZ);
 813				if (newskb == NULL) {
 814					skb = NULL;	/* drop pkt */
 815					goto memory_squeeze;
 816				}
 817				/* Pass up the skb already on the Rx ring. */
 818				skb_put(skb, pkt_len);
 819				rx_in_place = 1;
 820				rbd->skb = newskb;
 821				rbd->v_data = newskb->data;
 822				rbd->b_data = WSWAPchar(virt_to_bus(newskb->data));
 823#ifdef __mc68000__
 824				cache_clear(virt_to_phys(newskb->data), PKT_BUF_SZ);
 825#endif
 826			}
 827			else
 828				skb = netdev_alloc_skb(dev, pkt_len + 2);
 829memory_squeeze:
 830			if (skb == NULL) {
 831				/* XXX tulip.c can defer packets here!! */
 832				printk(KERN_WARNING "%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
 833				dev->stats.rx_dropped++;
 834			}
 835			else {
 836				if (!rx_in_place) {
 837					/* 16 byte align the data fields */
 838					skb_reserve(skb, 2);
 839					memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
 840				}
 841				skb->protocol=eth_type_trans(skb,dev);
 842				skb->len = pkt_len;
 843#ifdef __mc68000__
 844				cache_clear(virt_to_phys(rbd->skb->data),
 845						pkt_len);
 846#endif
 847				netif_rx(skb);
 848				dev->stats.rx_packets++;
 849				dev->stats.rx_bytes+=pkt_len;
 850			}
 851		}
 852		else {
 853			DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
 854					dev->name, rfd->stat));
 855			dev->stats.rx_errors++;
 856			if ((rfd->stat) & 0x0001)
 857				dev->stats.collisions++;
 858			if ((rfd->stat) & 0x0080)
 859				dev->stats.rx_length_errors++;
 860			if ((rfd->stat) & 0x0100)
 861				dev->stats.rx_over_errors++;
 862			if ((rfd->stat) & 0x0200)
 863				dev->stats.rx_fifo_errors++;
 864			if ((rfd->stat) & 0x0400)
 865				dev->stats.rx_frame_errors++;
 866			if ((rfd->stat) & 0x0800)
 867				dev->stats.rx_crc_errors++;
 868			if ((rfd->stat) & 0x1000)
 869				dev->stats.rx_length_errors++;
 870		}
 871
 872		/* Clear the buffer descriptor count and EOF + F flags */
 873
 874		if (rbd != I596_NULL && (rbd->count & 0x4000)) {
 875			rbd->count = 0;
 876			lp->rbd_head = rbd->v_next;
 877		}
 878
 879		/* Tidy the frame descriptor, marking it as end of list */
 880
 881		rfd->rbd = I596_NULL;
 882		rfd->stat = 0;
 883		rfd->cmd = CMD_EOL|CMD_FLEX;
 884		rfd->count = 0;
 885
 886		/* Remove end-of-list from old end descriptor */
 887
 888		rfd->v_prev->cmd = CMD_FLEX;
 889
 890		/* Update record of next frame descriptor to process */
 891
 892		lp->scb.rfd = rfd->b_next;
 893		lp->rfd_head = rfd->v_next;
 894		rfd = lp->rfd_head;
 895	}
 896
 897	DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
 898
 899	return 0;
 900}
 901
 902
 903static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
 904{
 905	struct i596_cmd *ptr;
 906
 907	while (lp->cmd_head != I596_NULL) {
 908		ptr = lp->cmd_head;
 909		lp->cmd_head = ptr->v_next;
 910		lp->cmd_backlog--;
 911
 912		switch ((ptr->command) & 0x7) {
 913		case CmdTx:
 914			{
 915				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
 916				struct sk_buff *skb = tx_cmd->skb;
 917
 918				dev_kfree_skb(skb);
 919
 920				dev->stats.tx_errors++;
 921				dev->stats.tx_aborted_errors++;
 922
 923				ptr->v_next = ptr->b_next = I596_NULL;
 924				tx_cmd->cmd.command = 0;  /* Mark as free */
 925				break;
 926			}
 927		default:
 928			ptr->v_next = ptr->b_next = I596_NULL;
 929		}
 930	}
 931
 932	wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out");
 933	lp->scb.cmd = I596_NULL;
 934}
 935
 936static void i596_reset(struct net_device *dev, struct i596_private *lp,
 937			int ioaddr)
 938{
 939	unsigned long flags;
 940
 941	DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
 942
 943	spin_lock_irqsave (&lp->lock, flags);
 944
 945	wait_cmd(dev,lp,100,"i596_reset timed out");
 946
 947	netif_stop_queue(dev);
 948
 949	lp->scb.command = CUC_ABORT | RX_ABORT;
 950	CA(dev);
 951
 952	/* wait for shutdown */
 953	wait_cmd(dev,lp,1000,"i596_reset 2 timed out");
 954	spin_unlock_irqrestore (&lp->lock, flags);
 955
 956	i596_cleanup_cmd(dev,lp);
 957	i596_rx(dev);
 958
 959	netif_start_queue(dev);
 960	init_i596_mem(dev);
 961}
 962
 963static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
 964{
 965	struct i596_private *lp = dev->ml_priv;
 966	int ioaddr = dev->base_addr;
 967	unsigned long flags;
 968
 969	DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
 970
 971	cmd->status = 0;
 972	cmd->command |= (CMD_EOL | CMD_INTR);
 973	cmd->v_next = cmd->b_next = I596_NULL;
 974
 975	spin_lock_irqsave (&lp->lock, flags);
 976
 977	if (lp->cmd_head != I596_NULL) {
 978		lp->cmd_tail->v_next = cmd;
 979		lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status));
 980	} else {
 981		lp->cmd_head = cmd;
 982		wait_cmd(dev,lp,100,"i596_add_cmd timed out");
 983		lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status));
 984		lp->scb.command = CUC_START;
 985		CA(dev);
 986	}
 987	lp->cmd_tail = cmd;
 988	lp->cmd_backlog++;
 989
 990	spin_unlock_irqrestore (&lp->lock, flags);
 991
 992	if (lp->cmd_backlog > max_cmd_backlog) {
 993		unsigned long tickssofar = jiffies - lp->last_cmd;
 994
 995		if (tickssofar < ticks_limit)
 996			return;
 997
 998		printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);
 999
1000		i596_reset(dev, lp, ioaddr);
1001	}
1002}
1003
1004static int i596_open(struct net_device *dev)
1005{
1006	int res = 0;
1007
1008	DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
1009
1010	if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
1011		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
1012		return -EAGAIN;
1013	}
1014#ifdef ENABLE_MVME16x_NET
1015	if (MACH_IS_MVME16x) {
1016		if (request_irq(0x56, i596_error, 0, "i82596_error", dev)) {
1017			res = -EAGAIN;
1018			goto err_irq_dev;
1019		}
1020	}
1021#endif
1022	res = init_rx_bufs(dev);
1023	if (res)
1024		goto err_irq_56;
1025
1026	netif_start_queue(dev);
1027
1028	if (init_i596_mem(dev)) {
1029		res = -EAGAIN;
1030		goto err_queue;
1031	}
1032
1033	return 0;
1034
1035err_queue:
1036	netif_stop_queue(dev);
1037	remove_rx_bufs(dev);
1038err_irq_56:
1039#ifdef ENABLE_MVME16x_NET
1040	free_irq(0x56, dev);
1041err_irq_dev:
1042#endif
1043	free_irq(dev->irq, dev);
1044
1045	return res;
1046}
1047
1048static void i596_tx_timeout (struct net_device *dev)
1049{
1050	struct i596_private *lp = dev->ml_priv;
1051	int ioaddr = dev->base_addr;
1052
1053	/* Transmitter timeout, serious problems. */
1054	DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
1055			dev->name));
1056
1057	dev->stats.tx_errors++;
1058
1059	/* Try to restart the adaptor */
1060	if (lp->last_restart == dev->stats.tx_packets) {
1061		DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
1062		/* Shutdown and restart */
1063		i596_reset (dev, lp, ioaddr);
1064	} else {
1065		/* Issue a channel attention signal */
1066		DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
1067		lp->scb.command = CUC_START | RX_START;
1068		CA (dev);
1069		lp->last_restart = dev->stats.tx_packets;
1070	}
1071
1072	dev->trans_start = jiffies; /* prevent tx timeout */
1073	netif_wake_queue (dev);
1074}
1075
1076static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
1077{
1078	struct i596_private *lp = dev->ml_priv;
1079	struct tx_cmd *tx_cmd;
1080	struct i596_tbd *tbd;
1081	short length = skb->len;
1082
1083	DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
1084				dev->name, skb->len, skb->data));
1085
1086	if (skb->len < ETH_ZLEN) {
1087		if (skb_padto(skb, ETH_ZLEN))
1088			return NETDEV_TX_OK;
1089		length = ETH_ZLEN;
1090	}
1091	netif_stop_queue(dev);
1092
1093	tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
1094	tbd = lp->tbds + lp->next_tx_cmd;
1095
1096	if (tx_cmd->cmd.command) {
1097		printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",
1098				dev->name);
1099		dev->stats.tx_dropped++;
1100
1101		dev_kfree_skb(skb);
1102	} else {
1103		if (++lp->next_tx_cmd == TX_RING_SIZE)
1104			lp->next_tx_cmd = 0;
1105		tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd));
1106		tbd->next = I596_NULL;
1107
1108		tx_cmd->cmd.command = CMD_FLEX | CmdTx;
1109		tx_cmd->skb = skb;
1110
1111		tx_cmd->pad = 0;
1112		tx_cmd->size = 0;
1113		tbd->pad = 0;
1114		tbd->size = EOF | length;
1115
1116		tbd->data = WSWAPchar(virt_to_bus(skb->data));
1117
1118#ifdef __mc68000__
1119		cache_push(virt_to_phys(skb->data), length);
1120#endif
1121		DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
1122		i596_add_cmd(dev, &tx_cmd->cmd);
1123
1124		dev->stats.tx_packets++;
1125		dev->stats.tx_bytes += length;
1126	}
1127
1128	netif_start_queue(dev);
1129
1130	return NETDEV_TX_OK;
1131}
1132
1133static void print_eth(unsigned char *add, char *str)
1134{
1135	printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
1136	       add, add + 6, add, add[12], add[13], str);
1137}
1138
1139static int io = 0x300;
1140static int irq = 10;
1141
1142static const struct net_device_ops i596_netdev_ops = {
1143	.ndo_open 		= i596_open,
1144	.ndo_stop		= i596_close,
1145	.ndo_start_xmit		= i596_start_xmit,
1146	.ndo_set_rx_mode	= set_multicast_list,
1147	.ndo_tx_timeout		= i596_tx_timeout,
1148	.ndo_change_mtu		= eth_change_mtu,
1149	.ndo_set_mac_address 	= eth_mac_addr,
1150	.ndo_validate_addr	= eth_validate_addr,
1151};
1152
1153struct net_device * __init i82596_probe(int unit)
1154{
1155	struct net_device *dev;
1156	int i;
1157	struct i596_private *lp;
1158	char eth_addr[8];
1159	static int probed;
1160	int err;
1161
1162	if (probed)
1163		return ERR_PTR(-ENODEV);
1164	probed++;
1165
1166	dev = alloc_etherdev(0);
1167	if (!dev)
1168		return ERR_PTR(-ENOMEM);
1169
1170	if (unit >= 0) {
1171		sprintf(dev->name, "eth%d", unit);
1172		netdev_boot_setup_check(dev);
1173	} else {
1174		dev->base_addr = io;
1175		dev->irq = irq;
1176	}
1177
1178#ifdef ENABLE_MVME16x_NET
1179	if (MACH_IS_MVME16x) {
1180		if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) {
1181			printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");
1182			err = -ENODEV;
1183			goto out;
1184		}
1185		memcpy(eth_addr, (void *) 0xfffc1f2c, 6);	/* YUCK! Get addr from NOVRAM */
1186		dev->base_addr = MVME_I596_BASE;
1187		dev->irq = (unsigned) MVME16x_IRQ_I596;
1188		goto found;
1189	}
1190#endif
1191#ifdef ENABLE_BVME6000_NET
1192	if (MACH_IS_BVME6000) {
1193		volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE;
1194		unsigned char msr = rtc[3];
1195		int i;
1196
1197		rtc[3] |= 0x80;
1198		for (i = 0; i < 6; i++)
1199			eth_addr[i] = rtc[i * 4 + 7];	/* Stored in RTC RAM at offset 1 */
1200		rtc[3] = msr;
1201		dev->base_addr = BVME_I596_BASE;
1202		dev->irq = (unsigned) BVME_IRQ_I596;
1203		goto found;
1204	}
1205#endif
1206#ifdef ENABLE_APRICOT
1207	{
1208		int checksum = 0;
1209		int ioaddr = 0x300;
1210
1211		/* this is easy the ethernet interface can only be at 0x300 */
1212		/* first check nothing is already registered here */
1213
1214		if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) {
1215			printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr);
1216			err = -EBUSY;
1217			goto out;
1218		}
1219
1220		dev->base_addr = ioaddr;
1221
1222		for (i = 0; i < 8; i++) {
1223			eth_addr[i] = inb(ioaddr + 8 + i);
1224			checksum += eth_addr[i];
1225		}
1226
1227		/* checksum is a multiple of 0x100, got this wrong first time
1228		   some machines have 0x100, some 0x200. The DOS driver doesn't
1229		   even bother with the checksum.
1230		   Some other boards trip the checksum.. but then appear as
1231		   ether address 0. Trap these - AC */
1232
1233		if ((checksum % 0x100) ||
1234		    (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) {
1235			err = -ENODEV;
1236			goto out1;
1237		}
1238
1239		dev->irq = 10;
1240		goto found;
1241	}
1242#endif
1243	err = -ENODEV;
1244	goto out;
1245
1246found:
1247	dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
1248	if (!dev->mem_start) {
1249		err = -ENOMEM;
1250		goto out1;
1251	}
1252
1253	DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
1254
1255	for (i = 0; i < 6; i++)
1256		DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]));
1257
1258	DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
1259
1260	DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
1261
1262	/* The 82596-specific entries in the device structure. */
1263	dev->netdev_ops = &i596_netdev_ops;
1264	dev->watchdog_timeo = TX_TIMEOUT;
1265
1266	dev->ml_priv = (void *)(dev->mem_start);
1267
1268	lp = dev->ml_priv;
1269	DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
1270			"lp->scb at 0x%08lx\n",
1271			dev->name, (unsigned long)lp,
1272			sizeof(struct i596_private), (unsigned long)&lp->scb));
1273	memset((void *) lp, 0, sizeof(struct i596_private));
1274
1275#ifdef __mc68000__
1276	cache_push(virt_to_phys((void *)(dev->mem_start)), 4096);
1277	cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096);
1278	kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER);
1279#endif
1280	lp->scb.command = 0;
1281	lp->scb.cmd = I596_NULL;
1282	lp->scb.rfd = I596_NULL;
1283	spin_lock_init(&lp->lock);
1284
1285	err = register_netdev(dev);
1286	if (err)
1287		goto out2;
1288	return dev;
1289out2:
1290#ifdef __mc68000__
1291	/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
1292	 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
1293	 */
1294	kernel_set_cachemode((void *)(dev->mem_start), 4096,
1295			IOMAP_FULL_CACHING);
1296#endif
1297	free_page ((u32)(dev->mem_start));
1298out1:
1299#ifdef ENABLE_APRICOT
1300	release_region(dev->base_addr, I596_TOTAL_SIZE);
1301#endif
1302out:
1303	free_netdev(dev);
1304	return ERR_PTR(err);
1305}
1306
1307static irqreturn_t i596_interrupt(int irq, void *dev_id)
1308{
1309	struct net_device *dev = dev_id;
1310	struct i596_private *lp;
1311	short ioaddr;
1312	unsigned short status, ack_cmd = 0;
1313	int handled = 0;
1314
1315#ifdef ENABLE_BVME6000_NET
1316	if (MACH_IS_BVME6000) {
1317		if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) {
1318			i596_error(irq, dev_id);
1319			return IRQ_HANDLED;
1320		}
1321	}
1322#endif
1323	if (dev == NULL) {
1324		printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq);
1325		return IRQ_NONE;
1326	}
1327
1328	ioaddr = dev->base_addr;
1329	lp = dev->ml_priv;
1330
1331	spin_lock (&lp->lock);
1332
1333	wait_cmd(dev,lp,100,"i596 interrupt, timeout");
1334	status = lp->scb.status;
1335
1336	DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
1337			dev->name, irq, status));
1338
1339	ack_cmd = status & 0xf000;
1340
1341	if ((status & 0x8000) || (status & 0x2000)) {
1342		struct i596_cmd *ptr;
1343
1344		handled = 1;
1345		if ((status & 0x8000))
1346			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
1347		if ((status & 0x2000))
1348			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
1349
1350		while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) {
1351			ptr = lp->cmd_head;
1352
1353			DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
1354				       lp->cmd_head->status, lp->cmd_head->command));
1355			lp->cmd_head = ptr->v_next;
1356			lp->cmd_backlog--;
1357
1358			switch ((ptr->command) & 0x7) {
1359			case CmdTx:
1360			    {
1361				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
1362				struct sk_buff *skb = tx_cmd->skb;
1363
1364				if ((ptr->status) & STAT_OK) {
1365					DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));
1366				} else {
1367					dev->stats.tx_errors++;
1368					if ((ptr->status) & 0x0020)
1369						dev->stats.collisions++;
1370					if (!((ptr->status) & 0x0040))
1371						dev->stats.tx_heartbeat_errors++;
1372					if ((ptr->status) & 0x0400)
1373						dev->stats.tx_carrier_errors++;
1374					if ((ptr->status) & 0x0800)
1375						dev->stats.collisions++;
1376					if ((ptr->status) & 0x1000)
1377						dev->stats.tx_aborted_errors++;
1378				}
1379
1380				dev_kfree_skb_irq(skb);
1381
1382				tx_cmd->cmd.command = 0; /* Mark free */
1383				break;
1384			    }
1385			case CmdTDR:
1386			    {
1387				unsigned short status = ((struct tdr_cmd *)ptr)->status;
1388
1389				if (status & 0x8000) {
1390					DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
1391				} else {
1392					if (status & 0x4000)
1393						printk(KERN_ERR "%s: Transceiver problem.\n", dev->name);
1394					if (status & 0x2000)
1395						printk(KERN_ERR "%s: Termination problem.\n", dev->name);
1396					if (status & 0x1000)
1397						printk(KERN_ERR "%s: Short circuit.\n", dev->name);
1398
1399					DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
1400				}
1401				break;
1402			    }
1403			case CmdConfigure:
1404			case CmdMulticastList:
1405				/* Zap command so set_multicast_list() knows it is free */
1406				ptr->command = 0;
1407				break;
1408			}
1409			ptr->v_next = ptr->b_next = I596_NULL;
1410			lp->last_cmd = jiffies;
1411		}
1412
1413		ptr = lp->cmd_head;
1414		while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) {
1415			ptr->command &= 0x1fff;
1416			ptr = ptr->v_next;
1417		}
1418
1419		if ((lp->cmd_head != I596_NULL))
1420			ack_cmd |= CUC_START;
1421		lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status));
1422	}
1423	if ((status & 0x1000) || (status & 0x4000)) {
1424		if ((status & 0x4000))
1425			DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
1426		i596_rx(dev);
1427		/* Only RX_START if stopped - RGH 07-07-96 */
1428		if (status & 0x1000) {
1429			if (netif_running(dev)) {
1430				DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
1431				ack_cmd |= RX_START;
1432				dev->stats.rx_errors++;
1433				dev->stats.rx_fifo_errors++;
1434				rebuild_rx_bufs(dev);
1435			}
1436		}
1437	}
1438	wait_cmd(dev,lp,100,"i596 interrupt, timeout");
1439	lp->scb.command = ack_cmd;
1440
1441#ifdef ENABLE_MVME16x_NET
1442	if (MACH_IS_MVME16x) {
1443		/* Ack the interrupt */
1444
1445		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
1446
1447		pcc2[0x2a] |= 0x08;
1448	}
1449#endif
1450#ifdef ENABLE_BVME6000_NET
1451	if (MACH_IS_BVME6000) {
1452		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
1453
1454		*ethirq = 1;
1455		*ethirq = 3;
1456	}
1457#endif
1458#ifdef ENABLE_APRICOT
1459	(void) inb(ioaddr + 0x10);
1460	outb(4, ioaddr + 0xf);
1461#endif
1462	CA(dev);
1463
1464	DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
1465
1466	spin_unlock (&lp->lock);
1467	return IRQ_RETVAL(handled);
1468}
1469
1470static int i596_close(struct net_device *dev)
1471{
1472	struct i596_private *lp = dev->ml_priv;
1473	unsigned long flags;
1474
1475	netif_stop_queue(dev);
1476
1477	DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
1478		       dev->name, lp->scb.status));
1479
1480	spin_lock_irqsave(&lp->lock, flags);
1481
1482	wait_cmd(dev,lp,100,"close1 timed out");
1483	lp->scb.command = CUC_ABORT | RX_ABORT;
1484	CA(dev);
1485
1486	wait_cmd(dev,lp,100,"close2 timed out");
1487
1488	spin_unlock_irqrestore(&lp->lock, flags);
1489	DEB(DEB_STRUCT,i596_display_data(dev));
1490	i596_cleanup_cmd(dev,lp);
1491
1492#ifdef ENABLE_MVME16x_NET
1493	if (MACH_IS_MVME16x) {
1494		volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
1495
1496		/* Disable all ints */
1497		pcc2[0x28] = 1;
1498		pcc2[0x2a] = 0x40;
1499		pcc2[0x2b] = 0x40;	/* Set snooping bits now! */
1500	}
1501#endif
1502#ifdef ENABLE_BVME6000_NET
1503	if (MACH_IS_BVME6000) {
1504		volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG;
1505
1506		*ethirq = 1;
1507	}
1508#endif
1509
1510#ifdef ENABLE_MVME16x_NET
1511	free_irq(0x56, dev);
1512#endif
1513	free_irq(dev->irq, dev);
1514	remove_rx_bufs(dev);
1515
1516	return 0;
1517}
1518
1519/*
1520 *    Set or clear the multicast filter for this adaptor.
1521 */
1522
1523static void set_multicast_list(struct net_device *dev)
1524{
1525	struct i596_private *lp = dev->ml_priv;
1526	int config = 0, cnt;
1527
1528	DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
1529		dev->name, netdev_mc_count(dev),
1530		dev->flags & IFF_PROMISC  ? "ON" : "OFF",
1531		dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
1532
1533	if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out"))
1534		return;
1535
1536	if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
1537		lp->cf_cmd.i596_config[8] |= 0x01;
1538		config = 1;
1539	}
1540	if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
1541		lp->cf_cmd.i596_config[8] &= ~0x01;
1542		config = 1;
1543	}
1544	if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
1545		lp->cf_cmd.i596_config[11] &= ~0x20;
1546		config = 1;
1547	}
1548	if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
1549		lp->cf_cmd.i596_config[11] |= 0x20;
1550		config = 1;
1551	}
1552	if (config) {
1553		lp->cf_cmd.cmd.command = CmdConfigure;
1554		i596_add_cmd(dev, &lp->cf_cmd.cmd);
1555	}
1556
1557	cnt = netdev_mc_count(dev);
1558	if (cnt > MAX_MC_CNT)
1559	{
1560		cnt = MAX_MC_CNT;
1561		printk(KERN_ERR "%s: Only %d multicast addresses supported",
1562			dev->name, cnt);
1563	}
1564
1565	if (!netdev_mc_empty(dev)) {
1566		struct netdev_hw_addr *ha;
1567		unsigned char *cp;
1568		struct mc_cmd *cmd;
1569
1570		if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out"))
1571			return;
1572		cmd = &lp->mc_cmd;
1573		cmd->cmd.command = CmdMulticastList;
1574		cmd->mc_cnt = cnt * ETH_ALEN;
1575		cp = cmd->mc_addrs;
1576		netdev_for_each_mc_addr(ha, dev) {
1577			if (!cnt--)
1578				break;
1579			memcpy(cp, ha->addr, ETH_ALEN);
1580			if (i596_debug > 1)
1581				DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
1582						dev->name, cp));
1583			cp += ETH_ALEN;
1584		}
1585		i596_add_cmd(dev, &cmd->cmd);
1586	}
1587}
1588
1589#ifdef MODULE
1590static struct net_device *dev_82596;
1591
1592#ifdef ENABLE_APRICOT
1593module_param(irq, int, 0);
1594MODULE_PARM_DESC(irq, "Apricot IRQ number");
1595#endif
1596
1597static int debug = -1;
1598module_param(debug, int, 0);
1599MODULE_PARM_DESC(debug, "i82596 debug mask");
1600
1601int __init init_module(void)
1602{
1603	if (debug >= 0)
1604		i596_debug = debug;
1605	dev_82596 = i82596_probe(-1);
1606	if (IS_ERR(dev_82596))
1607		return PTR_ERR(dev_82596);
1608	return 0;
1609}
1610
1611void __exit cleanup_module(void)
1612{
1613	unregister_netdev(dev_82596);
1614#ifdef __mc68000__
1615	/* XXX This assumes default cache mode to be IOMAP_FULL_CACHING,
1616	 * XXX which may be invalid (CONFIG_060_WRITETHROUGH)
1617	 */
1618
1619	kernel_set_cachemode((void *)(dev_82596->mem_start), 4096,
1620			IOMAP_FULL_CACHING);
1621#endif
1622	free_page ((u32)(dev_82596->mem_start));
1623#ifdef ENABLE_APRICOT
1624	/* If we don't do this, we can't re-insmod it later. */
1625	release_region(dev_82596->base_addr, I596_TOTAL_SIZE);
1626#endif
1627	free_netdev(dev_82596);
1628}
1629
1630#endif				/* MODULE */