Loading...
1/*
2 * Philips UCB1400 touchscreen driver
3 *
4 * Author: Nicolas Pitre
5 * Created: September 25, 2006
6 * Copyright: MontaVista Software, Inc.
7 *
8 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
9 * If something doesn't work and it worked before spliting, e-mail me,
10 * dont bother Nicolas please ;-)
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
17 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
18 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
19 */
20
21#include <linux/module.h>
22#include <linux/init.h>
23#include <linux/completion.h>
24#include <linux/delay.h>
25#include <linux/input.h>
26#include <linux/device.h>
27#include <linux/interrupt.h>
28#include <linux/suspend.h>
29#include <linux/kthread.h>
30#include <linux/freezer.h>
31#include <linux/ucb1400.h>
32
33static int adcsync;
34static int ts_delay = 55; /* us */
35static int ts_delay_pressure; /* us */
36
37/* Switch to interrupt mode. */
38static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
39{
40 ucb1400_reg_write(ac97, UCB_TS_CR,
41 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
42 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
43 UCB_TS_CR_MODE_INT);
44}
45
46/*
47 * Switch to pressure mode, and read pressure. We don't need to wait
48 * here, since both plates are being driven.
49 */
50static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
51{
52 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
53 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
54 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
55 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
56 udelay(ts_delay_pressure);
57 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
58}
59
60/*
61 * Switch to X position mode and measure Y plate. We switch the plate
62 * configuration in pressure mode, then switch to position mode. This
63 * gives a faster response time. Even so, we need to wait about 55us
64 * for things to stabilise.
65 */
66static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
67{
68 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
69 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
70 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
71 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
72 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
73 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
74 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
75 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
76 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
77
78 udelay(ts_delay);
79
80 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
81}
82
83/*
84 * Switch to Y position mode and measure X plate. We switch the plate
85 * configuration in pressure mode, then switch to position mode. This
86 * gives a faster response time. Even so, we need to wait about 55us
87 * for things to stabilise.
88 */
89static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
90{
91 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
92 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
93 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
94 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
95 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
96 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
97 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
98 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
99 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
100
101 udelay(ts_delay);
102
103 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
104}
105
106/*
107 * Switch to X plate resistance mode. Set MX to ground, PX to
108 * supply. Measure current.
109 */
110static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
111{
112 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
113 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
114 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
115 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
116}
117
118/*
119 * Switch to Y plate resistance mode. Set MY to ground, PY to
120 * supply. Measure current.
121 */
122static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
123{
124 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
125 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
126 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
127 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
128}
129
130static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97)
131{
132 unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
133
134 return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
135}
136
137static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
138{
139 ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
140 ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
141 ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
142}
143
144static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
145{
146 ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
147}
148
149static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
150{
151 input_report_abs(idev, ABS_X, x);
152 input_report_abs(idev, ABS_Y, y);
153 input_report_abs(idev, ABS_PRESSURE, pressure);
154 input_report_key(idev, BTN_TOUCH, 1);
155 input_sync(idev);
156}
157
158static void ucb1400_ts_event_release(struct input_dev *idev)
159{
160 input_report_abs(idev, ABS_PRESSURE, 0);
161 input_report_key(idev, BTN_TOUCH, 0);
162 input_sync(idev);
163}
164
165static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
166{
167 unsigned int isr;
168
169 isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
170 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
171 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
172
173 if (isr & UCB_IE_TSPX)
174 ucb1400_ts_irq_disable(ucb->ac97);
175 else
176 dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
177 enable_irq(ucb->irq);
178}
179
180static int ucb1400_ts_thread(void *_ucb)
181{
182 struct ucb1400_ts *ucb = _ucb;
183 struct task_struct *tsk = current;
184 int valid = 0;
185 struct sched_param param = { .sched_priority = 1 };
186
187 sched_setscheduler(tsk, SCHED_FIFO, ¶m);
188
189 set_freezable();
190 while (!kthread_should_stop()) {
191 unsigned int x, y, p;
192 long timeout;
193
194 ucb->ts_restart = 0;
195
196 if (ucb->irq_pending) {
197 ucb->irq_pending = 0;
198 ucb1400_handle_pending_irq(ucb);
199 }
200
201 ucb1400_adc_enable(ucb->ac97);
202 x = ucb1400_ts_read_xpos(ucb);
203 y = ucb1400_ts_read_ypos(ucb);
204 p = ucb1400_ts_read_pressure(ucb);
205 ucb1400_adc_disable(ucb->ac97);
206
207 /* Switch back to interrupt mode. */
208 ucb1400_ts_mode_int(ucb->ac97);
209
210 msleep(10);
211
212 if (ucb1400_ts_pen_up(ucb->ac97)) {
213 ucb1400_ts_irq_enable(ucb->ac97);
214
215 /*
216 * If we spat out a valid sample set last time,
217 * spit out a "pen off" sample here.
218 */
219 if (valid) {
220 ucb1400_ts_event_release(ucb->ts_idev);
221 valid = 0;
222 }
223
224 timeout = MAX_SCHEDULE_TIMEOUT;
225 } else {
226 valid = 1;
227 ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
228 timeout = msecs_to_jiffies(10);
229 }
230
231 wait_event_freezable_timeout(ucb->ts_wait,
232 ucb->irq_pending || ucb->ts_restart ||
233 kthread_should_stop(), timeout);
234 }
235
236 /* Send the "pen off" if we are stopping with the pen still active */
237 if (valid)
238 ucb1400_ts_event_release(ucb->ts_idev);
239
240 ucb->ts_task = NULL;
241 return 0;
242}
243
244/*
245 * A restriction with interrupts exists when using the ucb1400, as
246 * the codec read/write routines may sleep while waiting for codec
247 * access completion and uses semaphores for access control to the
248 * AC97 bus. A complete codec read cycle could take anywhere from
249 * 60 to 100uSec so we *definitely* don't want to spin inside the
250 * interrupt handler waiting for codec access. So, we handle the
251 * interrupt by scheduling a RT kernel thread to run in process
252 * context instead of interrupt context.
253 */
254static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
255{
256 struct ucb1400_ts *ucb = devid;
257
258 if (irqnr == ucb->irq) {
259 disable_irq_nosync(ucb->irq);
260 ucb->irq_pending = 1;
261 wake_up(&ucb->ts_wait);
262 return IRQ_HANDLED;
263 }
264 return IRQ_NONE;
265}
266
267static int ucb1400_ts_open(struct input_dev *idev)
268{
269 struct ucb1400_ts *ucb = input_get_drvdata(idev);
270 int ret = 0;
271
272 BUG_ON(ucb->ts_task);
273
274 ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
275 if (IS_ERR(ucb->ts_task)) {
276 ret = PTR_ERR(ucb->ts_task);
277 ucb->ts_task = NULL;
278 }
279
280 return ret;
281}
282
283static void ucb1400_ts_close(struct input_dev *idev)
284{
285 struct ucb1400_ts *ucb = input_get_drvdata(idev);
286
287 if (ucb->ts_task)
288 kthread_stop(ucb->ts_task);
289
290 ucb1400_ts_irq_disable(ucb->ac97);
291 ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
292}
293
294#ifndef NO_IRQ
295#define NO_IRQ 0
296#endif
297
298/*
299 * Try to probe our interrupt, rather than relying on lots of
300 * hard-coded machine dependencies.
301 */
302static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
303{
304 unsigned long mask, timeout;
305
306 mask = probe_irq_on();
307
308 /* Enable the ADC interrupt. */
309 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
310 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
311 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
312 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
313
314 /* Cause an ADC interrupt. */
315 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
316 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
317
318 /* Wait for the conversion to complete. */
319 timeout = jiffies + HZ/2;
320 while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
321 UCB_ADC_DAT_VALID)) {
322 cpu_relax();
323 if (time_after(jiffies, timeout)) {
324 printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
325 probe_irq_off(mask);
326 return -ENODEV;
327 }
328 }
329 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
330
331 /* Disable and clear interrupt. */
332 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
333 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
334 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
335 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
336
337 /* Read triggered interrupt. */
338 ucb->irq = probe_irq_off(mask);
339 if (ucb->irq < 0 || ucb->irq == NO_IRQ)
340 return -ENODEV;
341
342 return 0;
343}
344
345static int ucb1400_ts_probe(struct platform_device *dev)
346{
347 int error, x_res, y_res;
348 u16 fcsr;
349 struct ucb1400_ts *ucb = dev->dev.platform_data;
350
351 ucb->ts_idev = input_allocate_device();
352 if (!ucb->ts_idev) {
353 error = -ENOMEM;
354 goto err;
355 }
356
357 /* Only in case the IRQ line wasn't supplied, try detecting it */
358 if (ucb->irq < 0) {
359 error = ucb1400_ts_detect_irq(ucb);
360 if (error) {
361 printk(KERN_ERR "UCB1400: IRQ probe failed\n");
362 goto err_free_devs;
363 }
364 }
365
366 init_waitqueue_head(&ucb->ts_wait);
367
368 error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
369 "UCB1400", ucb);
370 if (error) {
371 printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
372 ucb->irq, error);
373 goto err_free_devs;
374 }
375 printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
376
377 input_set_drvdata(ucb->ts_idev, ucb);
378
379 ucb->ts_idev->dev.parent = &dev->dev;
380 ucb->ts_idev->name = "UCB1400 touchscreen interface";
381 ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
382 AC97_VENDOR_ID1);
383 ucb->ts_idev->id.product = ucb->id;
384 ucb->ts_idev->open = ucb1400_ts_open;
385 ucb->ts_idev->close = ucb1400_ts_close;
386 ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
387 ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
388
389 /*
390 * Enable ADC filter to prevent horrible jitter on Colibri.
391 * This also further reduces jitter on boards where ADCSYNC
392 * pin is connected.
393 */
394 fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
395 ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
396
397 ucb1400_adc_enable(ucb->ac97);
398 x_res = ucb1400_ts_read_xres(ucb);
399 y_res = ucb1400_ts_read_yres(ucb);
400 ucb1400_adc_disable(ucb->ac97);
401 printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
402
403 input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
404 input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
405 input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
406
407 error = input_register_device(ucb->ts_idev);
408 if (error)
409 goto err_free_irq;
410
411 return 0;
412
413err_free_irq:
414 free_irq(ucb->irq, ucb);
415err_free_devs:
416 input_free_device(ucb->ts_idev);
417err:
418 return error;
419
420}
421
422static int ucb1400_ts_remove(struct platform_device *dev)
423{
424 struct ucb1400_ts *ucb = dev->dev.platform_data;
425
426 free_irq(ucb->irq, ucb);
427 input_unregister_device(ucb->ts_idev);
428 return 0;
429}
430
431#ifdef CONFIG_PM
432static int ucb1400_ts_resume(struct platform_device *dev)
433{
434 struct ucb1400_ts *ucb = dev->dev.platform_data;
435
436 if (ucb->ts_task) {
437 /*
438 * Restart the TS thread to ensure the
439 * TS interrupt mode is set up again
440 * after sleep.
441 */
442 ucb->ts_restart = 1;
443 wake_up(&ucb->ts_wait);
444 }
445 return 0;
446}
447#else
448#define ucb1400_ts_resume NULL
449#endif
450
451static struct platform_driver ucb1400_ts_driver = {
452 .probe = ucb1400_ts_probe,
453 .remove = ucb1400_ts_remove,
454 .resume = ucb1400_ts_resume,
455 .driver = {
456 .name = "ucb1400_ts",
457 },
458};
459
460static int __init ucb1400_ts_init(void)
461{
462 return platform_driver_register(&ucb1400_ts_driver);
463}
464
465static void __exit ucb1400_ts_exit(void)
466{
467 platform_driver_unregister(&ucb1400_ts_driver);
468}
469
470module_param(adcsync, bool, 0444);
471MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
472
473module_param(ts_delay, int, 0444);
474MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
475 " position read. Default = 55us.");
476
477module_param(ts_delay_pressure, int, 0444);
478MODULE_PARM_DESC(ts_delay_pressure,
479 "delay between panel setup and pressure read."
480 " Default = 0us.");
481
482module_init(ucb1400_ts_init);
483module_exit(ucb1400_ts_exit);
484
485MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
486MODULE_LICENSE("GPL");
1/*
2 * Philips UCB1400 touchscreen driver
3 *
4 * Author: Nicolas Pitre
5 * Created: September 25, 2006
6 * Copyright: MontaVista Software, Inc.
7 *
8 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
9 * If something doesn't work and it worked before spliting, e-mail me,
10 * dont bother Nicolas please ;-)
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 *
16 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
17 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
18 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
19 */
20
21#include <linux/module.h>
22#include <linux/init.h>
23#include <linux/delay.h>
24#include <linux/sched.h>
25#include <linux/wait.h>
26#include <linux/input.h>
27#include <linux/device.h>
28#include <linux/interrupt.h>
29#include <linux/ucb1400.h>
30
31#define UCB1400_TS_POLL_PERIOD 10 /* ms */
32
33static bool adcsync;
34static int ts_delay = 55; /* us */
35static int ts_delay_pressure; /* us */
36
37/* Switch to interrupt mode. */
38static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb)
39{
40 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
41 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
42 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
43 UCB_TS_CR_MODE_INT);
44}
45
46/*
47 * Switch to pressure mode, and read pressure. We don't need to wait
48 * here, since both plates are being driven.
49 */
50static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
51{
52 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
53 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
54 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
55 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
56
57 udelay(ts_delay_pressure);
58
59 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
60}
61
62/*
63 * Switch to X position mode and measure Y plate. We switch the plate
64 * configuration in pressure mode, then switch to position mode. This
65 * gives a faster response time. Even so, we need to wait about 55us
66 * for things to stabilise.
67 */
68static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
69{
70 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
71 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
72 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
73 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
74 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
75 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
76 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
77 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
78 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
79
80 udelay(ts_delay);
81
82 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
83}
84
85/*
86 * Switch to Y position mode and measure X plate. We switch the plate
87 * configuration in pressure mode, then switch to position mode. This
88 * gives a faster response time. Even so, we need to wait about 55us
89 * for things to stabilise.
90 */
91static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
92{
93 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
94 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
95 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
96 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
97 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
98 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
99 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
100 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
101 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
102
103 udelay(ts_delay);
104
105 return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
106}
107
108/*
109 * Switch to X plate resistance mode. Set MX to ground, PX to
110 * supply. Measure current.
111 */
112static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
113{
114 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
115 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
116 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
117 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
118}
119
120/*
121 * Switch to Y plate resistance mode. Set MY to ground, PY to
122 * supply. Measure current.
123 */
124static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
125{
126 ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
127 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
128 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
129 return ucb1400_adc_read(ucb->ac97, 0, adcsync);
130}
131
132static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb)
133{
134 unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR);
135
136 return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
137}
138
139static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb)
140{
141 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
142 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
143 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX);
144}
145
146static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb)
147{
148 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
149}
150
151static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y)
152{
153 input_report_abs(idev, ABS_X, x);
154 input_report_abs(idev, ABS_Y, y);
155 input_report_abs(idev, ABS_PRESSURE, pressure);
156 input_report_key(idev, BTN_TOUCH, 1);
157 input_sync(idev);
158}
159
160static void ucb1400_ts_event_release(struct input_dev *idev)
161{
162 input_report_abs(idev, ABS_PRESSURE, 0);
163 input_report_key(idev, BTN_TOUCH, 0);
164 input_sync(idev);
165}
166
167static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb)
168{
169 unsigned int isr;
170
171 isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
172 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
173 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
174
175 if (isr & UCB_IE_TSPX)
176 ucb1400_ts_irq_disable(ucb);
177 else
178 dev_dbg(&ucb->ts_idev->dev,
179 "ucb1400: unexpected IE_STATUS = %#x\n", isr);
180}
181
182/*
183 * A restriction with interrupts exists when using the ucb1400, as
184 * the codec read/write routines may sleep while waiting for codec
185 * access completion and uses semaphores for access control to the
186 * AC97 bus. Therefore the driver is forced to use threaded interrupt
187 * handler.
188 */
189static irqreturn_t ucb1400_irq(int irqnr, void *devid)
190{
191 struct ucb1400_ts *ucb = devid;
192 unsigned int x, y, p;
193 bool penup;
194
195 if (unlikely(irqnr != ucb->irq))
196 return IRQ_NONE;
197
198 ucb1400_clear_pending_irq(ucb);
199
200 /* Start with a small delay before checking pendown state */
201 msleep(UCB1400_TS_POLL_PERIOD);
202
203 while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) {
204
205 ucb1400_adc_enable(ucb->ac97);
206 x = ucb1400_ts_read_xpos(ucb);
207 y = ucb1400_ts_read_ypos(ucb);
208 p = ucb1400_ts_read_pressure(ucb);
209 ucb1400_adc_disable(ucb->ac97);
210
211 ucb1400_ts_report_event(ucb->ts_idev, p, x, y);
212
213 wait_event_timeout(ucb->ts_wait, ucb->stopped,
214 msecs_to_jiffies(UCB1400_TS_POLL_PERIOD));
215 }
216
217 ucb1400_ts_event_release(ucb->ts_idev);
218
219 if (!ucb->stopped) {
220 /* Switch back to interrupt mode. */
221 ucb1400_ts_mode_int(ucb);
222 ucb1400_ts_irq_enable(ucb);
223 }
224
225 return IRQ_HANDLED;
226}
227
228static void ucb1400_ts_stop(struct ucb1400_ts *ucb)
229{
230 /* Signal IRQ thread to stop polling and disable the handler. */
231 ucb->stopped = true;
232 mb();
233 wake_up(&ucb->ts_wait);
234 disable_irq(ucb->irq);
235
236 ucb1400_ts_irq_disable(ucb);
237 ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
238}
239
240/* Must be called with ts->lock held */
241static void ucb1400_ts_start(struct ucb1400_ts *ucb)
242{
243 /* Tell IRQ thread that it may poll the device. */
244 ucb->stopped = false;
245 mb();
246
247 ucb1400_ts_mode_int(ucb);
248 ucb1400_ts_irq_enable(ucb);
249
250 enable_irq(ucb->irq);
251}
252
253static int ucb1400_ts_open(struct input_dev *idev)
254{
255 struct ucb1400_ts *ucb = input_get_drvdata(idev);
256
257 ucb1400_ts_start(ucb);
258
259 return 0;
260}
261
262static void ucb1400_ts_close(struct input_dev *idev)
263{
264 struct ucb1400_ts *ucb = input_get_drvdata(idev);
265
266 ucb1400_ts_stop(ucb);
267}
268
269#ifndef NO_IRQ
270#define NO_IRQ 0
271#endif
272
273/*
274 * Try to probe our interrupt, rather than relying on lots of
275 * hard-coded machine dependencies.
276 */
277static int __devinit ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
278 struct platform_device *pdev)
279{
280 unsigned long mask, timeout;
281
282 mask = probe_irq_on();
283
284 /* Enable the ADC interrupt. */
285 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
286 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
287 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
288 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
289
290 /* Cause an ADC interrupt. */
291 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
292 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
293
294 /* Wait for the conversion to complete. */
295 timeout = jiffies + HZ/2;
296 while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
297 UCB_ADC_DAT_VALID)) {
298 cpu_relax();
299 if (time_after(jiffies, timeout)) {
300 dev_err(&pdev->dev, "timed out in IRQ probe\n");
301 probe_irq_off(mask);
302 return -ENODEV;
303 }
304 }
305 ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
306
307 /* Disable and clear interrupt. */
308 ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
309 ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
310 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
311 ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
312
313 /* Read triggered interrupt. */
314 ucb->irq = probe_irq_off(mask);
315 if (ucb->irq < 0 || ucb->irq == NO_IRQ)
316 return -ENODEV;
317
318 return 0;
319}
320
321static int __devinit ucb1400_ts_probe(struct platform_device *pdev)
322{
323 struct ucb1400_ts *ucb = pdev->dev.platform_data;
324 int error, x_res, y_res;
325 u16 fcsr;
326
327 ucb->ts_idev = input_allocate_device();
328 if (!ucb->ts_idev) {
329 error = -ENOMEM;
330 goto err;
331 }
332
333 /* Only in case the IRQ line wasn't supplied, try detecting it */
334 if (ucb->irq < 0) {
335 error = ucb1400_ts_detect_irq(ucb, pdev);
336 if (error) {
337 dev_err(&pdev->dev, "IRQ probe failed\n");
338 goto err_free_devs;
339 }
340 }
341 dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq);
342
343 init_waitqueue_head(&ucb->ts_wait);
344
345 input_set_drvdata(ucb->ts_idev, ucb);
346
347 ucb->ts_idev->dev.parent = &pdev->dev;
348 ucb->ts_idev->name = "UCB1400 touchscreen interface";
349 ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
350 AC97_VENDOR_ID1);
351 ucb->ts_idev->id.product = ucb->id;
352 ucb->ts_idev->open = ucb1400_ts_open;
353 ucb->ts_idev->close = ucb1400_ts_close;
354 ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
355 ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
356
357 /*
358 * Enable ADC filter to prevent horrible jitter on Colibri.
359 * This also further reduces jitter on boards where ADCSYNC
360 * pin is connected.
361 */
362 fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
363 ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
364
365 ucb1400_adc_enable(ucb->ac97);
366 x_res = ucb1400_ts_read_xres(ucb);
367 y_res = ucb1400_ts_read_yres(ucb);
368 ucb1400_adc_disable(ucb->ac97);
369 dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res);
370
371 input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
372 input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
373 input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
374
375 ucb1400_ts_stop(ucb);
376
377 error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq,
378 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
379 "UCB1400", ucb);
380 if (error) {
381 dev_err(&pdev->dev,
382 "unable to grab irq%d: %d\n", ucb->irq, error);
383 goto err_free_devs;
384 }
385
386 error = input_register_device(ucb->ts_idev);
387 if (error)
388 goto err_free_irq;
389
390 return 0;
391
392err_free_irq:
393 free_irq(ucb->irq, ucb);
394err_free_devs:
395 input_free_device(ucb->ts_idev);
396err:
397 return error;
398}
399
400static int __devexit ucb1400_ts_remove(struct platform_device *pdev)
401{
402 struct ucb1400_ts *ucb = pdev->dev.platform_data;
403
404 free_irq(ucb->irq, ucb);
405 input_unregister_device(ucb->ts_idev);
406
407 return 0;
408}
409
410#ifdef CONFIG_PM_SLEEP
411static int ucb1400_ts_suspend(struct device *dev)
412{
413 struct ucb1400_ts *ucb = dev->platform_data;
414 struct input_dev *idev = ucb->ts_idev;
415
416 mutex_lock(&idev->mutex);
417
418 if (idev->users)
419 ucb1400_ts_start(ucb);
420
421 mutex_unlock(&idev->mutex);
422 return 0;
423}
424
425static int ucb1400_ts_resume(struct device *dev)
426{
427 struct ucb1400_ts *ucb = dev->platform_data;
428 struct input_dev *idev = ucb->ts_idev;
429
430 mutex_lock(&idev->mutex);
431
432 if (idev->users)
433 ucb1400_ts_stop(ucb);
434
435 mutex_unlock(&idev->mutex);
436 return 0;
437}
438#endif
439
440static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
441 ucb1400_ts_suspend, ucb1400_ts_resume);
442
443static struct platform_driver ucb1400_ts_driver = {
444 .probe = ucb1400_ts_probe,
445 .remove = __devexit_p(ucb1400_ts_remove),
446 .driver = {
447 .name = "ucb1400_ts",
448 .owner = THIS_MODULE,
449 .pm = &ucb1400_ts_pm_ops,
450 },
451};
452module_platform_driver(ucb1400_ts_driver);
453
454module_param(adcsync, bool, 0444);
455MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
456
457module_param(ts_delay, int, 0444);
458MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
459 " position read. Default = 55us.");
460
461module_param(ts_delay_pressure, int, 0444);
462MODULE_PARM_DESC(ts_delay_pressure,
463 "delay between panel setup and pressure read."
464 " Default = 0us.");
465
466MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
467MODULE_LICENSE("GPL");