Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242 tristate "USB Garmin GPS driver"
243 help
244 Say Y here if you want to connect to your Garmin GPS.
245 Should work with most Garmin GPS devices which have a native USB port.
246
247 See <http://sourceforge.net/projects/garmin-gps> for the latest
248 version of the driver.
249
250 To compile this driver as a module, choose M here: the
251 module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254 tristate "USB IPWireless (3G UMTS TDD) Driver"
255 help
256 Say Y here if you want to use a IPWireless USB modem such as
257 the ones supplied by Axity3G/Sentech South Africa.
258
259 To compile this driver as a module, choose M here: the
260 module will be called ipw.
261
262config USB_SERIAL_IUU
263 tristate "USB Infinity USB Unlimited Phoenix Driver"
264 help
265 Say Y here if you want to use a IUU in phoenix mode and get
266 an extra ttyUSBx device. More information available on
267 http://eczema.ecze.com/iuu_phoenix.html
268
269 To compile this driver as a module, choose M here: the
270 module will be called iuu_phoenix.o
271
272config USB_SERIAL_KEYSPAN_PDA
273 tristate "USB Keyspan PDA Single Port Serial Driver"
274 select USB_EZUSB
275 help
276 Say Y here if you want to use a Keyspan PDA single port USB to
277 serial converter device. This driver makes use of firmware
278 developed from scratch by Brian Warner.
279
280 To compile this driver as a module, choose M here: the
281 module will be called keyspan_pda.
282
283config USB_SERIAL_KEYSPAN
284 tristate "USB Keyspan USA-xxx Serial Driver"
285 select USB_EZUSB
286 ---help---
287 Say Y here if you want to use Keyspan USB to serial converter
288 devices. This driver makes use of Keyspan's official firmware
289 and was developed with their support. You must also include
290 firmware to support your particular device(s).
291
292 See <http://blemings.org/hugh/keyspan.html> for more information.
293
294 To compile this driver as a module, choose M here: the
295 module will be called keyspan.
296
297config USB_SERIAL_KEYSPAN_MPR
298 bool "USB Keyspan MPR Firmware"
299 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
300 help
301 Say Y here to include firmware for the Keyspan MPR converter.
302
303config USB_SERIAL_KEYSPAN_USA28
304 bool "USB Keyspan USA-28 Firmware"
305 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
306 help
307 Say Y here to include firmware for the USA-28 converter.
308
309config USB_SERIAL_KEYSPAN_USA28X
310 bool "USB Keyspan USA-28X Firmware"
311 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
312 help
313 Say Y here to include firmware for the USA-28X converter.
314 Be sure you have a USA-28X, there are also 28XA and 28XB
315 models, the label underneath has the actual part number.
316
317config USB_SERIAL_KEYSPAN_USA28XA
318 bool "USB Keyspan USA-28XA Firmware"
319 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
320 help
321 Say Y here to include firmware for the USA-28XA converter.
322 Be sure you have a USA-28XA, there are also 28X and 28XB
323 models, the label underneath has the actual part number.
324
325config USB_SERIAL_KEYSPAN_USA28XB
326 bool "USB Keyspan USA-28XB Firmware"
327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328 help
329 Say Y here to include firmware for the USA-28XB converter.
330 Be sure you have a USA-28XB, there are also 28X and 28XA
331 models, the label underneath has the actual part number.
332
333config USB_SERIAL_KEYSPAN_USA19
334 bool "USB Keyspan USA-19 Firmware"
335 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
336 help
337 Say Y here to include firmware for the USA-19 converter.
338
339config USB_SERIAL_KEYSPAN_USA18X
340 bool "USB Keyspan USA-18X Firmware"
341 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
342 help
343 Say Y here to include firmware for the USA-18X converter.
344
345config USB_SERIAL_KEYSPAN_USA19W
346 bool "USB Keyspan USA-19W Firmware"
347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348 help
349 Say Y here to include firmware for the USA-19W converter.
350
351config USB_SERIAL_KEYSPAN_USA19QW
352 bool "USB Keyspan USA-19QW Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19QW converter.
356
357config USB_SERIAL_KEYSPAN_USA19QI
358 bool "USB Keyspan USA-19QI Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-19QI converter.
362
363config USB_SERIAL_KEYSPAN_USA49W
364 bool "USB Keyspan USA-49W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-49W converter.
368
369config USB_SERIAL_KEYSPAN_USA49WLC
370 bool "USB Keyspan USA-49WLC Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-49WLC converter.
374
375config USB_SERIAL_KLSI
376 tristate "USB KL5KUSB105 (Palmconnect) Driver"
377 ---help---
378 Say Y here if you want to use a KL5KUSB105 - based single port
379 serial adapter. The most widely known -- and currently the only
380 tested -- device in this category is the PalmConnect USB Serial
381 adapter sold by Palm Inc. for use with their Palm III and Palm V
382 series PDAs.
383
384 Please read <file:Documentation/usb/usb-serial.txt> for more
385 information.
386
387 To compile this driver as a module, choose M here: the
388 module will be called kl5kusb105.
389
390config USB_SERIAL_KOBIL_SCT
391 tristate "USB KOBIL chipcard reader"
392 ---help---
393 Say Y here if you want to use one of the following KOBIL USB chipcard
394 readers:
395
396 - USB TWIN
397 - KAAN Standard Plus
398 - KAAN SIM
399 - SecOVID Reader Plus
400 - B1 Professional
401 - KAAN Professional
402
403 Note that you need a current CT-API.
404 To compile this driver as a module, choose M here: the
405 module will be called kobil_sct.
406
407config USB_SERIAL_MCT_U232
408 tristate "USB MCT Single Port Serial Driver"
409 ---help---
410 Say Y here if you want to use a USB Serial single port adapter from
411 Magic Control Technology Corp. (U232 is one of the model numbers).
412
413 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
414 BAY, Belkin F5U109, and Belkin F5U409 devices.
415
416 To compile this driver as a module, choose M here: the
417 module will be called mct_u232.
418
419config USB_SERIAL_MOS7720
420 tristate "USB Moschip 7720 Serial Driver"
421 ---help---
422 Say Y here if you want to use USB Serial single and double
423 port adapters from Moschip Semiconductor Tech.
424
425 To compile this driver as a module, choose M here: the
426 module will be called mos7720.
427
428config USB_SERIAL_MOS7715_PARPORT
429 bool "Support for parallel port on the Moschip 7715"
430 depends on USB_SERIAL_MOS7720
431 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
432 select PARPORT_NOT_PC
433 ---help---
434 Say Y if you have a Moschip 7715 device and would like to use
435 the parallel port it provides. The port will register with
436 the parport subsystem as a low-level driver.
437
438config USB_SERIAL_MOS7840
439 tristate "USB Moschip 7840/7820 USB Serial Driver"
440 ---help---
441 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
442 Dual-Serial port device from MosChip Semiconductor.
443
444 The MCS7840 and MCS7820 have been developed to connect a wide range
445 of standard serial devices to a USB host. The MCS7840 has a USB
446 device controller connected to four (4) individual UARTs while the
447 MCS7820 controller connects to two (2) individual UARTs.
448
449 To compile this driver as a module, choose M here: the
450 module will be called mos7840. If unsure, choose N.
451
452config USB_SERIAL_MOTOROLA
453 tristate "USB Motorola Phone modem driver"
454 ---help---
455 Say Y here if you want to use a Motorola phone with a USB
456 connector as a modem link.
457
458 To compile this driver as a module, choose M here: the
459 module will be called moto_modem. If unsure, choose N.
460
461config USB_SERIAL_NAVMAN
462 tristate "USB Navman GPS device"
463 help
464 To compile this driver as a module, choose M here: the
465 module will be called navman.
466
467config USB_SERIAL_PL2303
468 tristate "USB Prolific 2303 Single Port Serial Driver"
469 help
470 Say Y here if you want to use the PL2303 USB Serial single port
471 adapter from Prolific.
472
473 To compile this driver as a module, choose M here: the
474 module will be called pl2303.
475
476config USB_SERIAL_OTI6858
477 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
478 help
479 Say Y here if you want to use the OTi-6858 single port USB to serial
480 converter device.
481
482 To compile this driver as a module, choose M here: the
483 module will be called oti6858.
484
485config USB_SERIAL_QCAUX
486 tristate "USB Qualcomm Auxiliary Serial Port Driver"
487 help
488 Say Y here if you want to use the auxiliary serial ports provided
489 by many modems based on Qualcomm chipsets. These ports often use
490 a proprietary protocol called DM and cannot be used for AT- or
491 PPP-based communication.
492
493 To compile this driver as a module, choose M here: the
494 module will be called qcaux. If unsure, choose N.
495
496config USB_SERIAL_QUALCOMM
497 tristate "USB Qualcomm Serial modem"
498 select USB_SERIAL_WWAN
499 help
500 Say Y here if you have a Qualcomm USB modem device. These are
501 usually wireless cellular modems.
502
503 To compile this driver as a module, choose M here: the
504 module will be called qcserial.
505
506config USB_SERIAL_SPCP8X5
507 tristate "USB SPCP8x5 USB To Serial Driver"
508 help
509 Say Y here if you want to use the spcp8x5 converter chip. This is
510 commonly found in some Z-Wave USB devices.
511
512 To compile this driver as a module, choose M here: the
513 module will be called spcp8x5.
514
515config USB_SERIAL_HP4X
516 tristate "USB HP4x Calculators support"
517 help
518 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
519
520 To compile this driver as a module, choose M here: the
521 module will be called hp4x.
522
523config USB_SERIAL_SAFE
524 tristate "USB Safe Serial (Encapsulated) Driver"
525
526config USB_SERIAL_SAFE_PADDED
527 bool "USB Secure Encapsulated Driver - Padded"
528 depends on USB_SERIAL_SAFE
529
530config USB_SERIAL_SIEMENS_MPI
531 tristate "USB Siemens MPI driver"
532 help
533 Say M here if you want to use a Siemens USB/MPI adapter.
534
535 To compile this driver as a module, choose M here: the
536 module will be called siemens_mpi.
537
538config USB_SERIAL_SIERRAWIRELESS
539 tristate "USB Sierra Wireless Driver"
540 help
541 Say M here if you want to use Sierra Wireless devices.
542
543 Many devices have a feature known as TRU-Install. For those devices
544 to work properly, the USB Storage Sierra feature must be enabled.
545
546 To compile this driver as a module, choose M here: the
547 module will be called sierra.
548
549config USB_SERIAL_SYMBOL
550 tristate "USB Symbol Barcode driver (serial mode)"
551 help
552 Say Y here if you want to use a Symbol USB Barcode device
553 in serial emulation mode.
554
555 To compile this driver as a module, choose M here: the
556 module will be called symbolserial.
557
558config USB_SERIAL_TI
559 tristate "USB TI 3410/5052 Serial Driver"
560 help
561 Say Y here if you want to use the TI USB 3410 or 5052
562 serial devices.
563
564 To compile this driver as a module, choose M here: the
565 module will be called ti_usb_3410_5052.
566
567config USB_SERIAL_CYBERJACK
568 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
569 ---help---
570 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
571 reader. This is an interface to ISO 7816 compatible contact-based
572 chipcards, e.g. GSM SIMs.
573
574 To compile this driver as a module, choose M here: the
575 module will be called cyberjack.
576
577 If unsure, say N.
578
579config USB_SERIAL_XIRCOM
580 tristate "USB Xircom / Entregra Single Port Serial Driver"
581 select USB_EZUSB
582 help
583 Say Y here if you want to use a Xircom or Entregra single port USB to
584 serial converter device. This driver makes use of firmware
585 developed from scratch by Brian Warner.
586
587 To compile this driver as a module, choose M here: the
588 module will be called keyspan_pda.
589
590config USB_SERIAL_WWAN
591 tristate
592
593config USB_SERIAL_OPTION
594 tristate "USB driver for GSM and CDMA modems"
595 select USB_SERIAL_WWAN
596 help
597 Say Y here if you have a GSM or CDMA modem that's connected to USB.
598
599 This driver also supports several PCMCIA cards which have a
600 built-in OHCI-USB adapter and an internally-connected GSM modem.
601 The USB bus on these cards is not accessible externally.
602
603 Supported devices include (some of?) those made by:
604 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
605
606 To compile this driver as a module, choose M here: the
607 module will be called option.
608
609 If this driver doesn't recognize your device,
610 it might be accessible via the FTDI_SIO driver.
611
612config USB_SERIAL_OMNINET
613 tristate "USB ZyXEL omni.net LCD Plus Driver"
614 help
615 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
616
617 To compile this driver as a module, choose M here: the
618 module will be called omninet.
619
620config USB_SERIAL_OPTICON
621 tristate "USB Opticon Barcode driver (serial mode)"
622 help
623 Say Y here if you want to use a Opticon USB Barcode device
624 in serial emulation mode.
625
626 To compile this driver as a module, choose M here: the
627 module will be called opticon.
628
629config USB_SERIAL_VIVOPAY_SERIAL
630 tristate "USB ViVOpay serial interface driver"
631 help
632 Say Y here if you want to use a ViVOtech ViVOpay USB device.
633
634 To compile this driver as a module, choose M here: the
635 module will be called vivopay-serial.
636
637config USB_SERIAL_ZIO
638 tristate "ZIO Motherboard USB serial interface driver"
639 help
640 Say Y here if you want to use ZIO Motherboard.
641
642 To compile this driver as a module, choose M here: the
643 module will be called zio.
644
645config USB_SERIAL_SSU100
646 tristate "USB Quatech SSU-100 Single Port Serial Driver"
647 help
648 Say Y here if you want to use the Quatech SSU-100 single
649 port usb to serial adapter.
650
651 To compile this driver as a module, choose M here: the
652 module will be called ssu100.
653
654config USB_SERIAL_DEBUG
655 tristate "USB Debugging Device"
656 help
657 Say Y here if you have a USB debugging device used to receive
658 debugging data from another machine. The most common of these
659 devices is the NetChip TurboCONNECT device.
660
661 To compile this driver as a module, choose M here: the
662 module will be called usb-debug.
663
664endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Fundamental Software dongle.
62 - HP4x calculators
63 - a number of Motorola phones
64 - Siemens USB/MPI adapter.
65 - ViVOtech ViVOpay USB device.
66 - Infineon Modem Flashloader USB interface
67 - ZIO Motherboard USB serial interface
68
69 To compile this driver as a module, choose M here: the module
70 will be called usb-serial-simple.
71
72config USB_SERIAL_AIRCABLE
73 tristate "USB AIRcable Bluetooth Dongle Driver"
74 help
75 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
76
77 To compile this driver as a module, choose M here: the module
78 will be called aircable.
79
80config USB_SERIAL_ARK3116
81 tristate "USB ARK Micro 3116 USB Serial Driver"
82 help
83 Say Y here if you want to use a ARK Micro 3116 USB to Serial
84 device.
85
86 To compile this driver as a module, choose M here: the
87 module will be called ark3116
88
89config USB_SERIAL_BELKIN
90 tristate "USB Belkin and Peracom Single Port Serial Driver"
91 help
92 Say Y here if you want to use a Belkin USB Serial single port
93 adaptor (F5U103 is one of the model numbers) or the Peracom single
94 port USB to serial adapter.
95
96 To compile this driver as a module, choose M here: the
97 module will be called belkin_sa.
98
99config USB_SERIAL_CH341
100 tristate "USB Winchiphead CH341 Single Port Serial Driver"
101 help
102 Say Y here if you want to use a Winchiphead CH341 single port
103 USB to serial adapter.
104
105 To compile this driver as a module, choose M here: the
106 module will be called ch341.
107
108config USB_SERIAL_WHITEHEAT
109 tristate "USB ConnectTech WhiteHEAT Serial Driver"
110 select USB_EZUSB_FX2
111 help
112 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
113 USB to serial converter device.
114
115 To compile this driver as a module, choose M here: the
116 module will be called whiteheat.
117
118config USB_SERIAL_DIGI_ACCELEPORT
119 tristate "USB Digi International AccelePort USB Serial Driver"
120 ---help---
121 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
122 2 port (plus parallel port) and 4 port USB serial converters. The
123 parallel port on the USB 2 appears as a third serial port on Linux.
124 The Digi Acceleport USB 8 is not yet supported by this driver.
125
126 This driver works under SMP with the usb-uhci driver. It does not
127 work under SMP with the uhci driver.
128
129 To compile this driver as a module, choose M here: the
130 module will be called digi_acceleport.
131
132config USB_SERIAL_CP210X
133 tristate "USB CP210x family of UART Bridge Controllers"
134 help
135 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
136 to RS232 converters.
137
138 To compile this driver as a module, choose M here: the
139 module will be called cp210x.
140
141config USB_SERIAL_CYPRESS_M8
142 tristate "USB Cypress M8 USB Serial Driver"
143 help
144 Say Y here if you want to use a device that contains the Cypress
145 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
146
147 Attempted SMP support... send bug reports!
148
149 Supported microcontrollers in the CY4601 family are:
150 CY7C63741 CY7C63742 CY7C63743 CY7C64013
151
152 To compile this driver as a module, choose M here: the
153 module will be called cypress_m8.
154
155config USB_SERIAL_EMPEG
156 tristate "USB Empeg empeg-car Mark I/II Driver"
157 help
158 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
159 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
160 device node. See <file:Documentation/usb/usb-serial.txt> for more
161 tidbits of information.
162
163 To compile this driver as a module, choose M here: the
164 module will be called empeg.
165
166config USB_SERIAL_FTDI_SIO
167 tristate "USB FTDI Single Port Serial Driver"
168 ---help---
169 Say Y here if you want to use a FTDI SIO single port USB to serial
170 converter device. The implementation I have is called the USC-1000.
171 This driver has also be tested with the 245 and 232 devices.
172
173 See <http://ftdi-usb-sio.sourceforge.net/> for more
174 information on this driver and the device.
175
176 To compile this driver as a module, choose M here: the
177 module will be called ftdi_sio.
178
179config USB_SERIAL_VISOR
180 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
181 help
182 Say Y here if you want to connect to your HandSpring Visor, Palm
183 m500 or m505 through its USB docking station. See
184 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
185 driver.
186
187 To compile this driver as a module, choose M here: the
188 module will be called visor.
189
190config USB_SERIAL_IPAQ
191 tristate "USB PocketPC PDA Driver"
192 help
193 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
194 or any other PDA running Windows CE 3.0 or PocketPC 2002
195 using a USB cradle/cable. For information on using the driver,
196 read <file:Documentation/usb/usb-serial.txt>.
197
198 To compile this driver as a module, choose M here: the
199 module will be called ipaq.
200
201config USB_SERIAL_IR
202 tristate "USB IR Dongle Serial Driver"
203 help
204 Say Y here if you want to enable simple serial support for USB IrDA
205 devices. This is useful if you do not want to use the full IrDA
206 stack.
207
208 To compile this driver as a module, choose M here: the
209 module will be called ir-usb.
210
211config USB_SERIAL_EDGEPORT
212 tristate "USB Inside Out Edgeport Serial Driver"
213 ---help---
214 Say Y here if you want to use any of the following devices from
215 Inside Out Networks (Digi):
216 Edgeport/4
217 Rapidport/4
218 Edgeport/4t
219 Edgeport/2
220 Edgeport/4i
221 Edgeport/2i
222 Edgeport/421
223 Edgeport/21
224 Edgeport/8
225 Edgeport/8 Dual
226 Edgeport/2D8
227 Edgeport/4D8
228 Edgeport/8i
229 Edgeport/2 DIN
230 Edgeport/4 DIN
231 Edgeport/16 Dual
232
233 To compile this driver as a module, choose M here: the
234 module will be called io_edgeport.
235
236config USB_SERIAL_EDGEPORT_TI
237 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
238 help
239 Say Y here if you want to use any of the devices from Inside Out
240 Networks (Digi) that are not supported by the io_edgeport driver.
241 This includes the Edgeport/1 device.
242
243 To compile this driver as a module, choose M here: the
244 module will be called io_ti.
245
246config USB_SERIAL_F81232
247 tristate "USB Fintek F81232 Single Port Serial Driver"
248 help
249 Say Y here if you want to use the Fintek F81232 single
250 port usb to serial adapter.
251
252 To compile this driver as a module, choose M here: the
253 module will be called f81232.
254
255config USB_SERIAL_GARMIN
256 tristate "USB Garmin GPS driver"
257 help
258 Say Y here if you want to connect to your Garmin GPS.
259 Should work with most Garmin GPS devices which have a native USB port.
260
261 See <http://sourceforge.net/projects/garmin-gps> for the latest
262 version of the driver.
263
264 To compile this driver as a module, choose M here: the
265 module will be called garmin_gps.
266
267config USB_SERIAL_IPW
268 tristate "USB IPWireless (3G UMTS TDD) Driver"
269 select USB_SERIAL_WWAN
270 help
271 Say Y here if you want to use a IPWireless USB modem such as
272 the ones supplied by Axity3G/Sentech South Africa.
273
274 To compile this driver as a module, choose M here: the
275 module will be called ipw.
276
277config USB_SERIAL_IUU
278 tristate "USB Infinity USB Unlimited Phoenix Driver"
279 help
280 Say Y here if you want to use a IUU in phoenix mode and get
281 an extra ttyUSBx device. More information available on
282 http://eczema.ecze.com/iuu_phoenix.html
283
284 To compile this driver as a module, choose M here: the
285 module will be called iuu_phoenix.o
286
287config USB_SERIAL_KEYSPAN_PDA
288 tristate "USB Keyspan PDA Single Port Serial Driver"
289 select USB_EZUSB_FX2
290 help
291 Say Y here if you want to use a Keyspan PDA single port USB to
292 serial converter device. This driver makes use of firmware
293 developed from scratch by Brian Warner.
294
295 To compile this driver as a module, choose M here: the
296 module will be called keyspan_pda.
297
298config USB_SERIAL_KEYSPAN
299 tristate "USB Keyspan USA-xxx Serial Driver"
300 select USB_EZUSB_FX2
301 ---help---
302 Say Y here if you want to use Keyspan USB to serial converter
303 devices. This driver makes use of Keyspan's official firmware
304 and was developed with their support. You must also include
305 firmware to support your particular device(s).
306
307 See <http://blemings.org/hugh/keyspan.html> for more information.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan.
311
312config USB_SERIAL_KEYSPAN_MPR
313 bool "USB Keyspan MPR Firmware"
314 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
315 help
316 Say Y here to include firmware for the Keyspan MPR converter.
317
318config USB_SERIAL_KEYSPAN_USA28
319 bool "USB Keyspan USA-28 Firmware"
320 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
321 help
322 Say Y here to include firmware for the USA-28 converter.
323
324config USB_SERIAL_KEYSPAN_USA28X
325 bool "USB Keyspan USA-28X Firmware"
326 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
327 help
328 Say Y here to include firmware for the USA-28X converter.
329 Be sure you have a USA-28X, there are also 28XA and 28XB
330 models, the label underneath has the actual part number.
331
332config USB_SERIAL_KEYSPAN_USA28XA
333 bool "USB Keyspan USA-28XA Firmware"
334 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
335 help
336 Say Y here to include firmware for the USA-28XA converter.
337 Be sure you have a USA-28XA, there are also 28X and 28XB
338 models, the label underneath has the actual part number.
339
340config USB_SERIAL_KEYSPAN_USA28XB
341 bool "USB Keyspan USA-28XB Firmware"
342 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
343 help
344 Say Y here to include firmware for the USA-28XB converter.
345 Be sure you have a USA-28XB, there are also 28X and 28XA
346 models, the label underneath has the actual part number.
347
348config USB_SERIAL_KEYSPAN_USA19
349 bool "USB Keyspan USA-19 Firmware"
350 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
351 help
352 Say Y here to include firmware for the USA-19 converter.
353
354config USB_SERIAL_KEYSPAN_USA18X
355 bool "USB Keyspan USA-18X Firmware"
356 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
357 help
358 Say Y here to include firmware for the USA-18X converter.
359
360config USB_SERIAL_KEYSPAN_USA19W
361 bool "USB Keyspan USA-19W Firmware"
362 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
363 help
364 Say Y here to include firmware for the USA-19W converter.
365
366config USB_SERIAL_KEYSPAN_USA19QW
367 bool "USB Keyspan USA-19QW Firmware"
368 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
369 help
370 Say Y here to include firmware for the USA-19QW converter.
371
372config USB_SERIAL_KEYSPAN_USA19QI
373 bool "USB Keyspan USA-19QI Firmware"
374 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
375 help
376 Say Y here to include firmware for the USA-19QI converter.
377
378config USB_SERIAL_KEYSPAN_USA49W
379 bool "USB Keyspan USA-49W Firmware"
380 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
381 help
382 Say Y here to include firmware for the USA-49W converter.
383
384config USB_SERIAL_KEYSPAN_USA49WLC
385 bool "USB Keyspan USA-49WLC Firmware"
386 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
387 help
388 Say Y here to include firmware for the USA-49WLC converter.
389
390config USB_SERIAL_KLSI
391 tristate "USB KL5KUSB105 (Palmconnect) Driver"
392 ---help---
393 Say Y here if you want to use a KL5KUSB105 - based single port
394 serial adapter. The most widely known -- and currently the only
395 tested -- device in this category is the PalmConnect USB Serial
396 adapter sold by Palm Inc. for use with their Palm III and Palm V
397 series PDAs.
398
399 Please read <file:Documentation/usb/usb-serial.txt> for more
400 information.
401
402 To compile this driver as a module, choose M here: the
403 module will be called kl5kusb105.
404
405config USB_SERIAL_KOBIL_SCT
406 tristate "USB KOBIL chipcard reader"
407 ---help---
408 Say Y here if you want to use one of the following KOBIL USB chipcard
409 readers:
410
411 - USB TWIN
412 - KAAN Standard Plus
413 - KAAN SIM
414 - SecOVID Reader Plus
415 - B1 Professional
416 - KAAN Professional
417
418 Note that you need a current CT-API.
419 To compile this driver as a module, choose M here: the
420 module will be called kobil_sct.
421
422config USB_SERIAL_MCT_U232
423 tristate "USB MCT Single Port Serial Driver"
424 ---help---
425 Say Y here if you want to use a USB Serial single port adapter from
426 Magic Control Technology Corp. (U232 is one of the model numbers).
427
428 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
429 BAY, Belkin F5U109, and Belkin F5U409 devices.
430
431 To compile this driver as a module, choose M here: the
432 module will be called mct_u232.
433
434config USB_SERIAL_METRO
435 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
436 ---help---
437 Say Y here if you want to use a USB POS Metrologic barcode scanner.
438
439 To compile this driver as a module, choose M here: the
440 module will be called metro-usb.
441
442config USB_SERIAL_MOS7720
443 tristate "USB Moschip 7720 Serial Driver"
444 ---help---
445 Say Y here if you want to use USB Serial single and double
446 port adapters from Moschip Semiconductor Tech.
447
448 To compile this driver as a module, choose M here: the
449 module will be called mos7720.
450
451config USB_SERIAL_MOS7715_PARPORT
452 bool "Support for parallel port on the Moschip 7715"
453 depends on USB_SERIAL_MOS7720
454 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
455 select PARPORT_NOT_PC
456 ---help---
457 Say Y if you have a Moschip 7715 device and would like to use
458 the parallel port it provides. The port will register with
459 the parport subsystem as a low-level driver.
460
461config USB_SERIAL_MOS7840
462 tristate "USB Moschip 7840/7820 USB Serial Driver"
463 ---help---
464 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
465 Dual-Serial port device from MosChip Semiconductor.
466
467 The MCS7840 and MCS7820 have been developed to connect a wide range
468 of standard serial devices to a USB host. The MCS7840 has a USB
469 device controller connected to four (4) individual UARTs while the
470 MCS7820 controller connects to two (2) individual UARTs.
471
472 To compile this driver as a module, choose M here: the
473 module will be called mos7840. If unsure, choose N.
474
475config USB_SERIAL_MXUPORT
476 tristate "USB Moxa UPORT Serial Driver"
477 ---help---
478 Say Y here if you want to use a MOXA UPort Serial hub.
479
480 This driver supports:
481
482 [2 Port]
483 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
484 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
485 Isolation
486
487 [4 Port]
488 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
489 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
490 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
491 Isolation
492
493 [8 Port]
494 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
495 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
496
497 [16 Port]
498 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
499 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
500
501 To compile this driver as a module, choose M here: the
502 module will be called mxuport.
503
504config USB_SERIAL_NAVMAN
505 tristate "USB Navman GPS device"
506 help
507 To compile this driver as a module, choose M here: the
508 module will be called navman.
509
510config USB_SERIAL_PL2303
511 tristate "USB Prolific 2303 Single Port Serial Driver"
512 help
513 Say Y here if you want to use the PL2303 USB Serial single port
514 adapter from Prolific.
515
516 To compile this driver as a module, choose M here: the
517 module will be called pl2303.
518
519config USB_SERIAL_OTI6858
520 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
521 help
522 Say Y here if you want to use the OTi-6858 single port USB to serial
523 converter device.
524
525 To compile this driver as a module, choose M here: the
526 module will be called oti6858.
527
528config USB_SERIAL_QCAUX
529 tristate "USB Qualcomm Auxiliary Serial Port Driver"
530 help
531 Say Y here if you want to use the auxiliary serial ports provided
532 by many modems based on Qualcomm chipsets. These ports often use
533 a proprietary protocol called DM and cannot be used for AT- or
534 PPP-based communication.
535
536 To compile this driver as a module, choose M here: the
537 module will be called qcaux. If unsure, choose N.
538
539config USB_SERIAL_QUALCOMM
540 tristate "USB Qualcomm Serial modem"
541 select USB_SERIAL_WWAN
542 help
543 Say Y here if you have a Qualcomm USB modem device. These are
544 usually wireless cellular modems.
545
546 To compile this driver as a module, choose M here: the
547 module will be called qcserial.
548
549config USB_SERIAL_SPCP8X5
550 tristate "USB SPCP8x5 USB To Serial Driver"
551 help
552 Say Y here if you want to use the spcp8x5 converter chip. This is
553 commonly found in some Z-Wave USB devices.
554
555 To compile this driver as a module, choose M here: the
556 module will be called spcp8x5.
557
558config USB_SERIAL_SAFE
559 tristate "USB Safe Serial (Encapsulated) Driver"
560
561config USB_SERIAL_SAFE_PADDED
562 bool "USB Secure Encapsulated Driver - Padded"
563 depends on USB_SERIAL_SAFE
564
565config USB_SERIAL_SIERRAWIRELESS
566 tristate "USB Sierra Wireless Driver"
567 help
568 Say M here if you want to use Sierra Wireless devices.
569
570 Many devices have a feature known as TRU-Install. For those devices
571 to work properly, the USB Storage Sierra feature must be enabled.
572
573 To compile this driver as a module, choose M here: the
574 module will be called sierra.
575
576config USB_SERIAL_SYMBOL
577 tristate "USB Symbol Barcode driver (serial mode)"
578 help
579 Say Y here if you want to use a Symbol USB Barcode device
580 in serial emulation mode.
581
582 To compile this driver as a module, choose M here: the
583 module will be called symbolserial.
584
585config USB_SERIAL_TI
586 tristate "USB TI 3410/5052 Serial Driver"
587 help
588 Say Y here if you want to use the TI USB 3410 or 5052
589 serial devices.
590
591 To compile this driver as a module, choose M here: the
592 module will be called ti_usb_3410_5052.
593
594config USB_SERIAL_CYBERJACK
595 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
596 ---help---
597 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
598 reader. This is an interface to ISO 7816 compatible contact-based
599 chipcards, e.g. GSM SIMs.
600
601 To compile this driver as a module, choose M here: the
602 module will be called cyberjack.
603
604 If unsure, say N.
605
606config USB_SERIAL_XIRCOM
607 tristate "USB Xircom / Entregra Single Port Serial Driver"
608 select USB_EZUSB_FX2
609 help
610 Say Y here if you want to use a Xircom or Entregra single port USB to
611 serial converter device. This driver makes use of firmware
612 developed from scratch by Brian Warner.
613
614 To compile this driver as a module, choose M here: the
615 module will be called keyspan_pda.
616
617config USB_SERIAL_WWAN
618 tristate
619
620config USB_SERIAL_OPTION
621 tristate "USB driver for GSM and CDMA modems"
622 select USB_SERIAL_WWAN
623 help
624 Say Y here if you have a GSM or CDMA modem that's connected to USB.
625
626 This driver also supports several PCMCIA cards which have a
627 built-in OHCI-USB adapter and an internally-connected GSM modem.
628 The USB bus on these cards is not accessible externally.
629
630 Supported devices include (some of?) those made by:
631 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
632
633 To compile this driver as a module, choose M here: the
634 module will be called option.
635
636 If this driver doesn't recognize your device,
637 it might be accessible via the FTDI_SIO driver.
638
639config USB_SERIAL_OMNINET
640 tristate "USB ZyXEL omni.net LCD Plus Driver"
641 help
642 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
643
644 To compile this driver as a module, choose M here: the
645 module will be called omninet.
646
647config USB_SERIAL_OPTICON
648 tristate "USB Opticon Barcode driver (serial mode)"
649 help
650 Say Y here if you want to use a Opticon USB Barcode device
651 in serial emulation mode.
652
653 To compile this driver as a module, choose M here: the
654 module will be called opticon.
655
656config USB_SERIAL_XSENS_MT
657 tristate "Xsens motion tracker serial interface driver"
658 help
659 Say Y here if you want to use Xsens motion trackers.
660
661 This driver supports the new generation of motion trackers
662 by Xsens. Older devices can be accessed using the FTDI_SIO
663 driver.
664
665 To compile this driver as a module, choose M here: the
666 module will be called xsens_mt.
667
668config USB_SERIAL_WISHBONE
669 tristate "USB-Wishbone adapter interface driver"
670 help
671 Say Y here if you want to use a USB attached Wishbone bus.
672
673 Wishbone is an open hardware SoC bus commonly used in FPGA
674 designs. Bus access can be serialized using the Etherbone
675 protocol <http://www.ohwr.org/projects/etherbone-core>.
676
677 This driver is intended to be used with devices which attach
678 their internal Wishbone bus to a USB serial interface using
679 the Etherbone protocol. A userspace library is required to
680 speak the protocol made available by this driver as ttyUSBx.
681
682 To compile this driver as a module, choose M here: the
683 module will be called wishbone-serial.
684
685config USB_SERIAL_ZTE
686 tristate "ZTE USB serial driver"
687 help
688 Say Y here if you want to use a ZTE USB to serial device.
689
690 To compile this driver as a module, choose M here: the
691 module will be called zte.
692
693config USB_SERIAL_SSU100
694 tristate "USB Quatech SSU-100 Single Port Serial Driver"
695 help
696 Say Y here if you want to use the Quatech SSU-100 single
697 port usb to serial adapter.
698
699 To compile this driver as a module, choose M here: the
700 module will be called ssu100.
701
702config USB_SERIAL_QT2
703 tristate "USB Quatech Serial Driver for USB 2 devices"
704 help
705 Say Y here if you want to use the Quatech USB 2
706 serial adapters.
707
708 To compile this driver as a module, choose M here: the
709 module will be called quatech-serial.
710
711config USB_SERIAL_DEBUG
712 tristate "USB Debugging Device"
713 help
714 Say Y here if you have a USB debugging device used to receive
715 debugging data from another machine. The most common of these
716 devices is the NetChip TurboCONNECT device.
717
718 To compile this driver as a module, choose M here: the
719 module will be called usb-debug.
720
721endif # USB_SERIAL