1/*
  2 * Universal Host Controller Interface driver for USB.
  3 *
  4 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
  5 *
  6 * (C) Copyright 1999 Linus Torvalds
  7 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
  8 * (C) Copyright 1999 Randy Dunlap
  9 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
 10 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
 11 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
 12 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
 13 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
 14 *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
 15 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
 16 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
 17 *
 18 * Intel documents this fairly well, and as far as I know there
 19 * are no royalties or anything like that, but even so there are
 20 * people who decided that they want to do the same thing in a
 21 * completely different way.
 22 *
 23 */
 24
 25#include <linux/module.h>
 26#include <linux/pci.h>
 27#include <linux/kernel.h>
 28#include <linux/init.h>
 29#include <linux/delay.h>
 30#include <linux/ioport.h>
 31#include <linux/slab.h>
 32#include <linux/errno.h>
 33#include <linux/unistd.h>
 34#include <linux/interrupt.h>
 35#include <linux/spinlock.h>
 36#include <linux/debugfs.h>
 37#include <linux/pm.h>
 38#include <linux/dmapool.h>
 39#include <linux/dma-mapping.h>
 40#include <linux/usb.h>
 41#include <linux/usb/hcd.h>
 42#include <linux/bitops.h>
 43#include <linux/dmi.h>
 44
 45#include <asm/uaccess.h>
 46#include <asm/io.h>
 47#include <asm/irq.h>
 48#include <asm/system.h>
 49
 50#include "uhci-hcd.h"
 51
 52/*
 53 * Version Information
 54 */
 55#define DRIVER_AUTHOR							\
 56	"Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, "		\
 57	"Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, "	\
 58	"Roman Weissgaerber, Alan Stern"
 59#define DRIVER_DESC "USB Universal Host Controller Interface driver"
 60
 61/* for flakey hardware, ignore overcurrent indicators */
 62static int ignore_oc;
 63module_param(ignore_oc, bool, S_IRUGO);
 64MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
 65
 66/*
 67 * debug = 0, no debugging messages
 68 * debug = 1, dump failed URBs except for stalls
 69 * debug = 2, dump all failed URBs (including stalls)
 70 *            show all queues in /sys/kernel/debug/uhci/[pci_addr]
 71 * debug = 3, show all TDs in URBs when dumping
 72 */
 73#ifdef DEBUG
 74#define DEBUG_CONFIGURED	1
 75static int debug = 1;
 76module_param(debug, int, S_IRUGO | S_IWUSR);
 77MODULE_PARM_DESC(debug, "Debug level");
 
 78
 79#else
 80#define DEBUG_CONFIGURED	0
 81#define debug			0
 
 
 82#endif
 83
 84static char *errbuf;
 85#define ERRBUF_LEN    (32 * 1024)
 86
 87static struct kmem_cache *uhci_up_cachep;	/* urb_priv */
 88
 89static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
 90static void wakeup_rh(struct uhci_hcd *uhci);
 91static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
 92
 93/*
 94 * Calculate the link pointer DMA value for the first Skeleton QH in a frame.
 95 */
 96static __hc32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
 97{
 98	int skelnum;
 99
100	/*
101	 * The interrupt queues will be interleaved as evenly as possible.
102	 * There's not much to be done about period-1 interrupts; they have
103	 * to occur in every frame.  But we can schedule period-2 interrupts
104	 * in odd-numbered frames, period-4 interrupts in frames congruent
105	 * to 2 (mod 4), and so on.  This way each frame only has two
106	 * interrupt QHs, which will help spread out bandwidth utilization.
107	 *
108	 * ffs (Find First bit Set) does exactly what we need:
109	 * 1,3,5,...  => ffs = 0 => use period-2 QH = skelqh[8],
110	 * 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
111	 * ffs >= 7 => not on any high-period queue, so use
112	 *	period-1 QH = skelqh[9].
113	 * Add in UHCI_NUMFRAMES to insure at least one bit is set.
114	 */
115	skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
116	if (skelnum <= 1)
117		skelnum = 9;
118	return LINK_TO_QH(uhci, uhci->skelqh[skelnum]);
119}
120
121#include "uhci-debug.c"
122#include "uhci-q.c"
123#include "uhci-hub.c"
124
125/*
126 * Finish up a host controller reset and update the recorded state.
127 */
128static void finish_reset(struct uhci_hcd *uhci)
129{
130	int port;
131
132	/* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
133	 * bits in the port status and control registers.
134	 * We have to clear them by hand.
135	 */
136	for (port = 0; port < uhci->rh_numports; ++port)
137		uhci_writew(uhci, 0, USBPORTSC1 + (port * 2));
138
139	uhci->port_c_suspend = uhci->resuming_ports = 0;
140	uhci->rh_state = UHCI_RH_RESET;
141	uhci->is_stopped = UHCI_IS_STOPPED;
142	clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
143}
144
145/*
146 * Last rites for a defunct/nonfunctional controller
147 * or one we don't want to use any more.
148 */
149static void uhci_hc_died(struct uhci_hcd *uhci)
150{
151	uhci_get_current_frame_number(uhci);
152	uhci->reset_hc(uhci);
153	finish_reset(uhci);
154	uhci->dead = 1;
155
156	/* The current frame may already be partway finished */
157	++uhci->frame_number;
158}
159
160/*
161 * Initialize a controller that was newly discovered or has lost power
162 * or otherwise been reset while it was suspended.  In none of these cases
163 * can we be sure of its previous state.
164 */
165static void check_and_reset_hc(struct uhci_hcd *uhci)
166{
167	if (uhci->check_and_reset_hc(uhci))
168		finish_reset(uhci);
169}
170
171#if defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC)
172/*
173 * The two functions below are generic reset functions that are used on systems
174 * that do not have keyboard and mouse legacy support. We assume that we are
175 * running on such a system if CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC is defined.
176 */
177
178/*
179 * Make sure the controller is completely inactive, unable to
180 * generate interrupts or do DMA.
181 */
182static void uhci_generic_reset_hc(struct uhci_hcd *uhci)
183{
184	/* Reset the HC - this will force us to get a
185	 * new notification of any already connected
186	 * ports due to the virtual disconnect that it
187	 * implies.
188	 */
189	uhci_writew(uhci, USBCMD_HCRESET, USBCMD);
190	mb();
191	udelay(5);
192	if (uhci_readw(uhci, USBCMD) & USBCMD_HCRESET)
193		dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
194
195	/* Just to be safe, disable interrupt requests and
196	 * make sure the controller is stopped.
197	 */
198	uhci_writew(uhci, 0, USBINTR);
199	uhci_writew(uhci, 0, USBCMD);
200}
201
202/*
203 * Initialize a controller that was newly discovered or has just been
204 * resumed.  In either case we can't be sure of its previous state.
205 *
206 * Returns: 1 if the controller was reset, 0 otherwise.
207 */
208static int uhci_generic_check_and_reset_hc(struct uhci_hcd *uhci)
209{
210	unsigned int cmd, intr;
211
212	/*
213	 * When restarting a suspended controller, we expect all the
214	 * settings to be the same as we left them:
215	 *
216	 *	Controller is stopped and configured with EGSM set;
217	 *	No interrupts enabled except possibly Resume Detect.
218	 *
219	 * If any of these conditions are violated we do a complete reset.
220	 */
221
222	cmd = uhci_readw(uhci, USBCMD);
223	if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
224		dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
225				__func__, cmd);
226		goto reset_needed;
227	}
228
229	intr = uhci_readw(uhci, USBINTR);
230	if (intr & (~USBINTR_RESUME)) {
231		dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
232				__func__, intr);
233		goto reset_needed;
234	}
235	return 0;
236
237reset_needed:
238	dev_dbg(uhci_dev(uhci), "Performing full reset\n");
239	uhci_generic_reset_hc(uhci);
240	return 1;
241}
242#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
243
244/*
245 * Store the basic register settings needed by the controller.
246 */
247static void configure_hc(struct uhci_hcd *uhci)
248{
249	/* Set the frame length to the default: 1 ms exactly */
250	uhci_writeb(uhci, USBSOF_DEFAULT, USBSOF);
251
252	/* Store the frame list base address */
253	uhci_writel(uhci, uhci->frame_dma_handle, USBFLBASEADD);
254
255	/* Set the current frame number */
256	uhci_writew(uhci, uhci->frame_number & UHCI_MAX_SOF_NUMBER,
257			USBFRNUM);
258
259	/* perform any arch/bus specific configuration */
260	if (uhci->configure_hc)
261		uhci->configure_hc(uhci);
262}
263
264static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
265{
266	/* If we have to ignore overcurrent events then almost by definition
267	 * we can't depend on resume-detect interrupts. */
268	if (ignore_oc)
269		return 1;
270
271	return uhci->resume_detect_interrupts_are_broken ?
272		uhci->resume_detect_interrupts_are_broken(uhci) : 0;
273}
274
275static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
276{
277	return uhci->global_suspend_mode_is_broken ?
278		uhci->global_suspend_mode_is_broken(uhci) : 0;
279}
280
281static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
282__releases(uhci->lock)
283__acquires(uhci->lock)
284{
285	int auto_stop;
286	int int_enable, egsm_enable, wakeup_enable;
287	struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
288
289	auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
290	dev_dbg(&rhdev->dev, "%s%s\n", __func__,
291			(auto_stop ? " (auto-stop)" : ""));
292
293	/* Start off by assuming Resume-Detect interrupts and EGSM work
294	 * and that remote wakeups should be enabled.
295	 */
296	egsm_enable = USBCMD_EGSM;
297	uhci->RD_enable = 1;
298	int_enable = USBINTR_RESUME;
299	wakeup_enable = 1;
300
301	/* In auto-stop mode wakeups must always be detected, but
302	 * Resume-Detect interrupts may be prohibited.  (In the absence
303	 * of CONFIG_PM, they are always disallowed.)
 
304	 */
305	if (auto_stop) {
306		if (!device_may_wakeup(&rhdev->dev))
307			int_enable = 0;
 
308
309	/* In bus-suspend mode wakeups may be disabled, but if they are
310	 * allowed then so are Resume-Detect interrupts.
311	 */
312	} else {
313#ifdef CONFIG_PM
 
 
 
 
 
314		if (!rhdev->do_remote_wakeup)
315			wakeup_enable = 0;
316#endif
317	}
 
318
319	/* EGSM causes the root hub to echo a 'K' signal (resume) out any
320	 * port which requests a remote wakeup.  According to the USB spec,
321	 * every hub is supposed to do this.  But if we are ignoring
322	 * remote-wakeup requests anyway then there's no point to it.
323	 * We also shouldn't enable EGSM if it's broken.
324	 */
325	if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
326		egsm_enable = 0;
327
328	/* If we're ignoring wakeup events then there's no reason to
329	 * enable Resume-Detect interrupts.  We also shouldn't enable
330	 * them if they are broken or disallowed.
331	 *
332	 * This logic may lead us to enabling RD but not EGSM.  The UHCI
333	 * spec foolishly says that RD works only when EGSM is on, but
334	 * there's no harm in enabling it anyway -- perhaps some chips
335	 * will implement it!
336	 */
337	if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
338			!int_enable)
339		uhci->RD_enable = int_enable = 0;
340
 
341	uhci_writew(uhci, int_enable, USBINTR);
342	uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
343	mb();
344	udelay(5);
345
346	/* If we're auto-stopping then no devices have been attached
347	 * for a while, so there shouldn't be any active URBs and the
348	 * controller should stop after a few microseconds.  Otherwise
349	 * we will give the controller one frame to stop.
350	 */
351	if (!auto_stop && !(uhci_readw(uhci, USBSTS) & USBSTS_HCH)) {
352		uhci->rh_state = UHCI_RH_SUSPENDING;
353		spin_unlock_irq(&uhci->lock);
354		msleep(1);
355		spin_lock_irq(&uhci->lock);
356		if (uhci->dead)
357			return;
358	}
359	if (!(uhci_readw(uhci, USBSTS) & USBSTS_HCH))
360		dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
361
362	uhci_get_current_frame_number(uhci);
363
364	uhci->rh_state = new_state;
365	uhci->is_stopped = UHCI_IS_STOPPED;
366
367	/* If interrupts don't work and remote wakeup is enabled then
368	 * the suspended root hub needs to be polled.
 
 
369	 */
370	if (!int_enable && wakeup_enable)
371		set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
372	else
373		clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
374
375	uhci_scan_schedule(uhci);
376	uhci_fsbr_off(uhci);
377}
378
379static void start_rh(struct uhci_hcd *uhci)
380{
381	uhci->is_stopped = 0;
382
383	/* Mark it configured and running with a 64-byte max packet.
384	 * All interrupts are enabled, even though RESUME won't do anything.
385	 */
386	uhci_writew(uhci, USBCMD_RS | USBCMD_CF | USBCMD_MAXP, USBCMD);
387	uhci_writew(uhci, USBINTR_TIMEOUT | USBINTR_RESUME |
388		USBINTR_IOC | USBINTR_SP, USBINTR);
389	mb();
390	uhci->rh_state = UHCI_RH_RUNNING;
391	set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
392}
393
394static void wakeup_rh(struct uhci_hcd *uhci)
395__releases(uhci->lock)
396__acquires(uhci->lock)
397{
398	dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
399			"%s%s\n", __func__,
400			uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
401				" (auto-start)" : "");
402
403	/* If we are auto-stopped then no devices are attached so there's
404	 * no need for wakeup signals.  Otherwise we send Global Resume
405	 * for 20 ms.
406	 */
407	if (uhci->rh_state == UHCI_RH_SUSPENDED) {
408		unsigned egsm;
409
410		/* Keep EGSM on if it was set before */
411		egsm = uhci_readw(uhci, USBCMD) & USBCMD_EGSM;
412		uhci->rh_state = UHCI_RH_RESUMING;
413		uhci_writew(uhci, USBCMD_FGR | USBCMD_CF | egsm, USBCMD);
414		spin_unlock_irq(&uhci->lock);
415		msleep(20);
416		spin_lock_irq(&uhci->lock);
417		if (uhci->dead)
418			return;
419
420		/* End Global Resume and wait for EOP to be sent */
421		uhci_writew(uhci, USBCMD_CF, USBCMD);
422		mb();
423		udelay(4);
424		if (uhci_readw(uhci, USBCMD) & USBCMD_FGR)
425			dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
426	}
427
428	start_rh(uhci);
429
430	/* Restart root hub polling */
431	mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
432}
433
434static irqreturn_t uhci_irq(struct usb_hcd *hcd)
435{
436	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
437	unsigned short status;
438
439	/*
440	 * Read the interrupt status, and write it back to clear the
441	 * interrupt cause.  Contrary to the UHCI specification, the
442	 * "HC Halted" status bit is persistent: it is RO, not R/WC.
443	 */
444	status = uhci_readw(uhci, USBSTS);
445	if (!(status & ~USBSTS_HCH))	/* shared interrupt, not mine */
446		return IRQ_NONE;
447	uhci_writew(uhci, status, USBSTS);		/* Clear it */
448
 
 
 
 
449	if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
450		if (status & USBSTS_HSE)
451			dev_err(uhci_dev(uhci), "host system error, "
452					"PCI problems?\n");
453		if (status & USBSTS_HCPE)
454			dev_err(uhci_dev(uhci), "host controller process "
455					"error, something bad happened!\n");
456		if (status & USBSTS_HCH) {
457			spin_lock(&uhci->lock);
458			if (uhci->rh_state >= UHCI_RH_RUNNING) {
459				dev_err(uhci_dev(uhci),
460					"host controller halted, "
461					"very bad!\n");
462				if (debug > 1 && errbuf) {
463					/* Print the schedule for debugging */
464					uhci_sprint_schedule(uhci,
465							errbuf, ERRBUF_LEN);
466					lprintk(errbuf);
467				}
468				uhci_hc_died(uhci);
469				usb_hc_died(hcd);
470
471				/* Force a callback in case there are
472				 * pending unlinks */
473				mod_timer(&hcd->rh_timer, jiffies);
474			}
475			spin_unlock(&uhci->lock);
476		}
477	}
478
479	if (status & USBSTS_RD)
 
480		usb_hcd_poll_rh_status(hcd);
481	else {
482		spin_lock(&uhci->lock);
483		uhci_scan_schedule(uhci);
 
484		spin_unlock(&uhci->lock);
485	}
486
487	return IRQ_HANDLED;
488}
489
490/*
491 * Store the current frame number in uhci->frame_number if the controller
492 * is running.  Expand from 11 bits (of which we use only 10) to a
493 * full-sized integer.
494 *
495 * Like many other parts of the driver, this code relies on being polled
496 * more than once per second as long as the controller is running.
497 */
498static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
499{
500	if (!uhci->is_stopped) {
501		unsigned delta;
502
503		delta = (uhci_readw(uhci, USBFRNUM) - uhci->frame_number) &
504				(UHCI_NUMFRAMES - 1);
505		uhci->frame_number += delta;
506	}
507}
508
509/*
510 * De-allocate all resources
511 */
512static void release_uhci(struct uhci_hcd *uhci)
513{
514	int i;
515
516	if (DEBUG_CONFIGURED) {
517		spin_lock_irq(&uhci->lock);
518		uhci->is_initialized = 0;
519		spin_unlock_irq(&uhci->lock);
520
521		debugfs_remove(uhci->dentry);
522	}
 
 
 
523
524	for (i = 0; i < UHCI_NUM_SKELQH; i++)
525		uhci_free_qh(uhci, uhci->skelqh[i]);
526
527	uhci_free_td(uhci, uhci->term_td);
528
529	dma_pool_destroy(uhci->qh_pool);
530
531	dma_pool_destroy(uhci->td_pool);
532
533	kfree(uhci->frame_cpu);
534
535	dma_free_coherent(uhci_dev(uhci),
536			UHCI_NUMFRAMES * sizeof(*uhci->frame),
537			uhci->frame, uhci->frame_dma_handle);
538}
539
540/*
541 * Allocate a frame list, and then setup the skeleton
542 *
543 * The hardware doesn't really know any difference
544 * in the queues, but the order does matter for the
545 * protocols higher up.  The order in which the queues
546 * are encountered by the hardware is:
547 *
548 *  - All isochronous events are handled before any
549 *    of the queues. We don't do that here, because
550 *    we'll create the actual TD entries on demand.
551 *  - The first queue is the high-period interrupt queue.
552 *  - The second queue is the period-1 interrupt and async
553 *    (low-speed control, full-speed control, then bulk) queue.
554 *  - The third queue is the terminating bandwidth reclamation queue,
555 *    which contains no members, loops back to itself, and is present
556 *    only when FSBR is on and there are no full-speed control or bulk QHs.
557 */
558static int uhci_start(struct usb_hcd *hcd)
559{
560	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
561	int retval = -EBUSY;
562	int i;
563	struct dentry __maybe_unused *dentry;
564
565	hcd->uses_new_polling = 1;
 
 
 
566
567	spin_lock_init(&uhci->lock);
568	setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
569			(unsigned long) uhci);
570	INIT_LIST_HEAD(&uhci->idle_qh_list);
571	init_waitqueue_head(&uhci->waitqh);
572
573#ifdef UHCI_DEBUG_OPS
574	dentry = debugfs_create_file(hcd->self.bus_name,
575			S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
576			uhci, &uhci_debug_operations);
577	if (!dentry) {
578		dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
579		return -ENOMEM;
580	}
581	uhci->dentry = dentry;
582#endif
583
584	uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
585			UHCI_NUMFRAMES * sizeof(*uhci->frame),
586			&uhci->frame_dma_handle, 0);
587	if (!uhci->frame) {
588		dev_err(uhci_dev(uhci), "unable to allocate "
589				"consistent memory for frame list\n");
590		goto err_alloc_frame;
591	}
592	memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
593
594	uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
595			GFP_KERNEL);
596	if (!uhci->frame_cpu) {
597		dev_err(uhci_dev(uhci), "unable to allocate "
598				"memory for frame pointers\n");
599		goto err_alloc_frame_cpu;
600	}
601
602	uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
603			sizeof(struct uhci_td), 16, 0);
604	if (!uhci->td_pool) {
605		dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
606		goto err_create_td_pool;
607	}
608
609	uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
610			sizeof(struct uhci_qh), 16, 0);
611	if (!uhci->qh_pool) {
612		dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
613		goto err_create_qh_pool;
614	}
615
616	uhci->term_td = uhci_alloc_td(uhci);
617	if (!uhci->term_td) {
618		dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
619		goto err_alloc_term_td;
620	}
621
622	for (i = 0; i < UHCI_NUM_SKELQH; i++) {
623		uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
624		if (!uhci->skelqh[i]) {
625			dev_err(uhci_dev(uhci), "unable to allocate QH\n");
626			goto err_alloc_skelqh;
627		}
628	}
629
630	/*
631	 * 8 Interrupt queues; link all higher int queues to int1 = async
632	 */
633	for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
634		uhci->skelqh[i]->link = LINK_TO_QH(uhci, uhci->skel_async_qh);
635	uhci->skel_async_qh->link = UHCI_PTR_TERM(uhci);
636	uhci->skel_term_qh->link = LINK_TO_QH(uhci, uhci->skel_term_qh);
637
638	/* This dummy TD is to work around a bug in Intel PIIX controllers */
639	uhci_fill_td(uhci, uhci->term_td, 0, uhci_explen(0) |
640			(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
641	uhci->term_td->link = UHCI_PTR_TERM(uhci);
642	uhci->skel_async_qh->element = uhci->skel_term_qh->element =
643		LINK_TO_TD(uhci, uhci->term_td);
644
645	/*
646	 * Fill the frame list: make all entries point to the proper
647	 * interrupt queue.
648	 */
649	for (i = 0; i < UHCI_NUMFRAMES; i++) {
650
651		/* Only place we don't use the frame list routines */
652		uhci->frame[i] = uhci_frame_skel_link(uhci, i);
653	}
654
655	/*
656	 * Some architectures require a full mb() to enforce completion of
657	 * the memory writes above before the I/O transfers in configure_hc().
658	 */
659	mb();
660
 
661	configure_hc(uhci);
662	uhci->is_initialized = 1;
663	spin_lock_irq(&uhci->lock);
664	start_rh(uhci);
665	spin_unlock_irq(&uhci->lock);
666	return 0;
667
668/*
669 * error exits:
670 */
671err_alloc_skelqh:
672	for (i = 0; i < UHCI_NUM_SKELQH; i++) {
673		if (uhci->skelqh[i])
674			uhci_free_qh(uhci, uhci->skelqh[i]);
675	}
676
677	uhci_free_td(uhci, uhci->term_td);
678
679err_alloc_term_td:
680	dma_pool_destroy(uhci->qh_pool);
681
682err_create_qh_pool:
683	dma_pool_destroy(uhci->td_pool);
684
685err_create_td_pool:
686	kfree(uhci->frame_cpu);
687
688err_alloc_frame_cpu:
689	dma_free_coherent(uhci_dev(uhci),
690			UHCI_NUMFRAMES * sizeof(*uhci->frame),
691			uhci->frame, uhci->frame_dma_handle);
692
693err_alloc_frame:
694	debugfs_remove(uhci->dentry);
695
696	return retval;
697}
698
699static void uhci_stop(struct usb_hcd *hcd)
700{
701	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
702
703	spin_lock_irq(&uhci->lock);
704	if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead)
705		uhci_hc_died(uhci);
706	uhci_scan_schedule(uhci);
707	spin_unlock_irq(&uhci->lock);
708	synchronize_irq(hcd->irq);
709
710	del_timer_sync(&uhci->fsbr_timer);
711	release_uhci(uhci);
712}
713
714#ifdef CONFIG_PM
715static int uhci_rh_suspend(struct usb_hcd *hcd)
716{
717	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
718	int rc = 0;
719
720	spin_lock_irq(&uhci->lock);
721	if (!HCD_HW_ACCESSIBLE(hcd))
722		rc = -ESHUTDOWN;
723	else if (uhci->dead)
724		;		/* Dead controllers tell no tales */
725
726	/* Once the controller is stopped, port resumes that are already
727	 * in progress won't complete.  Hence if remote wakeup is enabled
728	 * for the root hub and any ports are in the middle of a resume or
729	 * remote wakeup, we must fail the suspend.
730	 */
731	else if (hcd->self.root_hub->do_remote_wakeup &&
732			uhci->resuming_ports) {
733		dev_dbg(uhci_dev(uhci), "suspend failed because a port "
734				"is resuming\n");
735		rc = -EBUSY;
736	} else
737		suspend_rh(uhci, UHCI_RH_SUSPENDED);
738	spin_unlock_irq(&uhci->lock);
739	return rc;
740}
741
742static int uhci_rh_resume(struct usb_hcd *hcd)
743{
744	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
745	int rc = 0;
746
747	spin_lock_irq(&uhci->lock);
748	if (!HCD_HW_ACCESSIBLE(hcd))
749		rc = -ESHUTDOWN;
750	else if (!uhci->dead)
751		wakeup_rh(uhci);
752	spin_unlock_irq(&uhci->lock);
753	return rc;
754}
755
756#endif
757
758/* Wait until a particular device/endpoint's QH is idle, and free it */
759static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
760		struct usb_host_endpoint *hep)
761{
762	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
763	struct uhci_qh *qh;
764
765	spin_lock_irq(&uhci->lock);
766	qh = (struct uhci_qh *) hep->hcpriv;
767	if (qh == NULL)
768		goto done;
769
770	while (qh->state != QH_STATE_IDLE) {
771		++uhci->num_waiting;
772		spin_unlock_irq(&uhci->lock);
773		wait_event_interruptible(uhci->waitqh,
774				qh->state == QH_STATE_IDLE);
775		spin_lock_irq(&uhci->lock);
776		--uhci->num_waiting;
777	}
778
779	uhci_free_qh(uhci, qh);
780done:
781	spin_unlock_irq(&uhci->lock);
782}
783
784static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
785{
786	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
787	unsigned frame_number;
788	unsigned delta;
789
790	/* Minimize latency by avoiding the spinlock */
791	frame_number = uhci->frame_number;
792	barrier();
793	delta = (uhci_readw(uhci, USBFRNUM) - frame_number) &
794			(UHCI_NUMFRAMES - 1);
795	return frame_number + delta;
796}
797
798/* Determines number of ports on controller */
799static int uhci_count_ports(struct usb_hcd *hcd)
800{
801	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
802	unsigned io_size = (unsigned) hcd->rsrc_len;
803	int port;
804
805	/* The UHCI spec says devices must have 2 ports, and goes on to say
806	 * they may have more but gives no way to determine how many there
807	 * are.  However according to the UHCI spec, Bit 7 of the port
808	 * status and control register is always set to 1.  So we try to
809	 * use this to our advantage.  Another common failure mode when
810	 * a nonexistent register is addressed is to return all ones, so
811	 * we test for that also.
812	 */
813	for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
814		unsigned int portstatus;
815
816		portstatus = uhci_readw(uhci, USBPORTSC1 + (port * 2));
817		if (!(portstatus & 0x0080) || portstatus == 0xffff)
818			break;
819	}
820	if (debug)
821		dev_info(uhci_dev(uhci), "detected %d ports\n", port);
822
823	/* Anything greater than 7 is weird so we'll ignore it. */
824	if (port > UHCI_RH_MAXCHILD) {
825		dev_info(uhci_dev(uhci), "port count misdetected? "
826				"forcing to 2 ports\n");
827		port = 2;
828	}
829
830	return port;
831}
832
833static const char hcd_name[] = "uhci_hcd";
834
835#ifdef CONFIG_PCI
836#include "uhci-pci.c"
837#define	PCI_DRIVER		uhci_pci_driver
838#endif
839
840#ifdef CONFIG_SPARC_LEON
841#include "uhci-grlib.c"
842#define PLATFORM_DRIVER		uhci_grlib_driver
843#endif
844
 
 
 
 
 
845#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
846#error "missing bus glue for uhci-hcd"
847#endif
848
849static int __init uhci_hcd_init(void)
850{
851	int retval = -ENOMEM;
852
853	if (usb_disabled())
854		return -ENODEV;
855
856	printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n",
857			ignore_oc ? ", overcurrent ignored" : "");
858	set_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
859
860	if (DEBUG_CONFIGURED) {
861		errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
862		if (!errbuf)
863			goto errbuf_failed;
864		uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root);
865		if (!uhci_debugfs_root)
866			goto debug_failed;
867	}
868
869	uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
870		sizeof(struct urb_priv), 0, 0, NULL);
871	if (!uhci_up_cachep)
872		goto up_failed;
873
874#ifdef PLATFORM_DRIVER
875	retval = platform_driver_register(&PLATFORM_DRIVER);
876	if (retval < 0)
877		goto clean0;
878#endif
879
880#ifdef PCI_DRIVER
881	retval = pci_register_driver(&PCI_DRIVER);
882	if (retval < 0)
883		goto clean1;
884#endif
885
886	return 0;
887
888#ifdef PCI_DRIVER
889clean1:
890#endif
891#ifdef PLATFORM_DRIVER
892	platform_driver_unregister(&PLATFORM_DRIVER);
893clean0:
894#endif
895	kmem_cache_destroy(uhci_up_cachep);
896
897up_failed:
 
898	debugfs_remove(uhci_debugfs_root);
899
900debug_failed:
901	kfree(errbuf);
902
903errbuf_failed:
 
904
905	clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
906	return retval;
907}
908
909static void __exit uhci_hcd_cleanup(void) 
910{
911#ifdef PLATFORM_DRIVER
912	platform_driver_unregister(&PLATFORM_DRIVER);
913#endif
914#ifdef PCI_DRIVER
915	pci_unregister_driver(&PCI_DRIVER);
916#endif
917	kmem_cache_destroy(uhci_up_cachep);
918	debugfs_remove(uhci_debugfs_root);
 
919	kfree(errbuf);
 
920	clear_bit(USB_UHCI_LOADED, &usb_hcds_loaded);
921}
922
923module_init(uhci_hcd_init);
924module_exit(uhci_hcd_cleanup);
925
926MODULE_AUTHOR(DRIVER_AUTHOR);
927MODULE_DESCRIPTION(DRIVER_DESC);
928MODULE_LICENSE("GPL");