Loading...
1#
2# PHY Layer Configuration
3#
4
5menuconfig PHYLIB
6 tristate "PHY Device support and infrastructure"
7 depends on !S390
8 depends on NETDEVICES
9 help
10 Ethernet controllers are usually attached to PHY
11 devices. This option provides infrastructure for
12 managing PHY devices.
13
14if PHYLIB
15
16comment "MII PHY device drivers"
17
18config MARVELL_PHY
19 tristate "Drivers for Marvell PHYs"
20 ---help---
21 Currently has a driver for the 88E1011S
22
23config DAVICOM_PHY
24 tristate "Drivers for Davicom PHYs"
25 ---help---
26 Currently supports dm9161e and dm9131
27
28config QSEMI_PHY
29 tristate "Drivers for Quality Semiconductor PHYs"
30 ---help---
31 Currently supports the qs6612
32
33config LXT_PHY
34 tristate "Drivers for the Intel LXT PHYs"
35 ---help---
36 Currently supports the lxt970, lxt971
37
38config CICADA_PHY
39 tristate "Drivers for the Cicada PHYs"
40 ---help---
41 Currently supports the cis8204
42
43config VITESSE_PHY
44 tristate "Drivers for the Vitesse PHYs"
45 ---help---
46 Currently supports the vsc8244
47
48config SMSC_PHY
49 tristate "Drivers for SMSC PHYs"
50 ---help---
51 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
52
53config BROADCOM_PHY
54 tristate "Drivers for Broadcom PHYs"
55 ---help---
56 Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
57 and BCM5482 PHYs.
58
59config BCM63XX_PHY
60 tristate "Drivers for Broadcom 63xx SOCs internal PHY"
61 depends on BCM63XX
62 ---help---
63 Currently supports the 6348 and 6358 PHYs.
64
65config ICPLUS_PHY
66 tristate "Drivers for ICPlus PHYs"
67 ---help---
68 Currently supports the IP175C and IP1001 PHYs.
69
70config REALTEK_PHY
71 tristate "Drivers for Realtek PHYs"
72 ---help---
73 Supports the Realtek 821x PHY.
74
75config NATIONAL_PHY
76 tristate "Drivers for National Semiconductor PHYs"
77 ---help---
78 Currently supports the DP83865 PHY.
79
80config STE10XP
81 tristate "Driver for STMicroelectronics STe10Xp PHYs"
82 ---help---
83 This is the driver for the STe100p and STe101p PHYs.
84
85config LSI_ET1011C_PHY
86 tristate "Driver for LSI ET1011C PHY"
87 ---help---
88 Supports the LSI ET1011C PHY.
89
90config MICREL_PHY
91 tristate "Driver for Micrel PHYs"
92 ---help---
93 Supports the KSZ9021, VSC8201, KS8001 PHYs.
94
95config FIXED_PHY
96 bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
97 depends on PHYLIB=y
98 ---help---
99 Adds the platform "fixed" MDIO Bus to cover the boards that use
100 PHYs that are not connected to the real MDIO bus.
101
102 Currently tested with mpc866ads and mpc8349e-mitx.
103
104config MDIO_BITBANG
105 tristate "Support for bitbanged MDIO buses"
106 help
107 This module implements the MDIO bus protocol in software,
108 for use by low level drivers that export the ability to
109 drive the relevant pins.
110
111 If in doubt, say N.
112
113config MDIO_GPIO
114 tristate "Support for GPIO lib-based bitbanged MDIO buses"
115 depends on MDIO_BITBANG && GENERIC_GPIO
116 ---help---
117 Supports GPIO lib-based MDIO busses.
118
119 To compile this driver as a module, choose M here: the module
120 will be called mdio-gpio.
121
122config MDIO_OCTEON
123 tristate "Support for MDIO buses on Octeon SOCs"
124 depends on CPU_CAVIUM_OCTEON
125 default y
126 help
127
128 This module provides a driver for the Octeon MDIO busses.
129 It is required by the Octeon Ethernet device drivers.
130
131 If in doubt, say Y.
132
133endif # PHYLIB
1#
2# PHY Layer Configuration
3#
4
5menuconfig PHYLIB
6 tristate "PHY Device support and infrastructure"
7 depends on NETDEVICES
8 help
9 Ethernet controllers are usually attached to PHY
10 devices. This option provides infrastructure for
11 managing PHY devices.
12
13if PHYLIB
14
15comment "MII PHY device drivers"
16
17config AT803X_PHY
18 tristate "Drivers for Atheros AT803X PHYs"
19 ---help---
20 Currently supports the AT8030 and AT8035 model
21
22config AMD_PHY
23 tristate "Drivers for the AMD PHYs"
24 ---help---
25 Currently supports the am79c874
26
27config MARVELL_PHY
28 tristate "Drivers for Marvell PHYs"
29 ---help---
30 Currently has a driver for the 88E1011S
31
32config DAVICOM_PHY
33 tristate "Drivers for Davicom PHYs"
34 ---help---
35 Currently supports dm9161e and dm9131
36
37config QSEMI_PHY
38 tristate "Drivers for Quality Semiconductor PHYs"
39 ---help---
40 Currently supports the qs6612
41
42config LXT_PHY
43 tristate "Drivers for the Intel LXT PHYs"
44 ---help---
45 Currently supports the lxt970, lxt971
46
47config CICADA_PHY
48 tristate "Drivers for the Cicada PHYs"
49 ---help---
50 Currently supports the cis8204
51
52config VITESSE_PHY
53 tristate "Drivers for the Vitesse PHYs"
54 ---help---
55 Currently supports the vsc8244
56
57config SMSC_PHY
58 tristate "Drivers for SMSC PHYs"
59 ---help---
60 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
61
62config BROADCOM_PHY
63 tristate "Drivers for Broadcom PHYs"
64 ---help---
65 Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
66 and BCM5482 PHYs.
67
68config BCM63XX_PHY
69 tristate "Drivers for Broadcom 63xx SOCs internal PHY"
70 depends on BCM63XX
71 ---help---
72 Currently supports the 6348 and 6358 PHYs.
73
74config BCM7XXX_PHY
75 tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
76 ---help---
77 Currently supports the BCM7366, BCM7439, BCM7445, and
78 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
79
80config BCM87XX_PHY
81 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
82 help
83 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
84
85config ICPLUS_PHY
86 tristate "Drivers for ICPlus PHYs"
87 ---help---
88 Currently supports the IP175C and IP1001 PHYs.
89
90config REALTEK_PHY
91 tristate "Drivers for Realtek PHYs"
92 ---help---
93 Supports the Realtek 821x PHY.
94
95config NATIONAL_PHY
96 tristate "Drivers for National Semiconductor PHYs"
97 ---help---
98 Currently supports the DP83865 PHY.
99
100config STE10XP
101 tristate "Driver for STMicroelectronics STe10Xp PHYs"
102 ---help---
103 This is the driver for the STe100p and STe101p PHYs.
104
105config LSI_ET1011C_PHY
106 tristate "Driver for LSI ET1011C PHY"
107 ---help---
108 Supports the LSI ET1011C PHY.
109
110config MICREL_PHY
111 tristate "Driver for Micrel PHYs"
112 ---help---
113 Supports the KSZ9021, VSC8201, KS8001 PHYs.
114
115config FIXED_PHY
116 bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
117 depends on PHYLIB=y
118 ---help---
119 Adds the platform "fixed" MDIO Bus to cover the boards that use
120 PHYs that are not connected to the real MDIO bus.
121
122 Currently tested with mpc866ads and mpc8349e-mitx.
123
124config MDIO_BITBANG
125 tristate "Support for bitbanged MDIO buses"
126 help
127 This module implements the MDIO bus protocol in software,
128 for use by low level drivers that export the ability to
129 drive the relevant pins.
130
131 If in doubt, say N.
132
133config MDIO_GPIO
134 tristate "Support for GPIO lib-based bitbanged MDIO buses"
135 depends on MDIO_BITBANG && GPIOLIB
136 ---help---
137 Supports GPIO lib-based MDIO busses.
138
139 To compile this driver as a module, choose M here: the module
140 will be called mdio-gpio.
141
142config MDIO_OCTEON
143 tristate "Support for MDIO buses on Octeon SOCs"
144 depends on CAVIUM_OCTEON_SOC
145 default y
146 help
147
148 This module provides a driver for the Octeon MDIO busses.
149 It is required by the Octeon Ethernet device drivers.
150
151 If in doubt, say Y.
152
153config MDIO_SUN4I
154 tristate "Allwinner sun4i MDIO interface support"
155 depends on ARCH_SUNXI
156 select REGULATOR
157 select REGULATOR_FIXED_VOLTAGE
158 help
159 This driver supports the MDIO interface found in the network
160 interface units of the Allwinner SoC that have an EMAC (A10,
161 A12, A10s, etc.)
162
163config MDIO_MOXART
164 tristate "MOXA ART MDIO interface support"
165 depends on ARCH_MOXART
166 help
167 This driver supports the MDIO interface found in the network
168 interface units of the MOXA ART SoC
169
170config MDIO_BUS_MUX
171 tristate
172 depends on OF_MDIO
173 help
174 This module provides a driver framework for MDIO bus
175 multiplexers which connect one of several child MDIO busses
176 to a parent bus. Switching between child busses is done by
177 device specific drivers.
178
179config MDIO_BUS_MUX_GPIO
180 tristate "Support for GPIO controlled MDIO bus multiplexers"
181 depends on OF_GPIO && OF_MDIO
182 select MDIO_BUS_MUX
183 help
184 This module provides a driver for MDIO bus multiplexers that
185 are controlled via GPIO lines. The multiplexer connects one of
186 several child MDIO busses to a parent bus. Child bus
187 selection is under the control of GPIO lines.
188
189config MDIO_BUS_MUX_MMIOREG
190 tristate "Support for MMIO device-controlled MDIO bus multiplexers"
191 depends on OF_MDIO
192 select MDIO_BUS_MUX
193 help
194 This module provides a driver for MDIO bus multiplexers that
195 are controlled via a simple memory-mapped device, like an FPGA.
196 The multiplexer connects one of several child MDIO busses to a
197 parent bus. Child bus selection is under the control of one of
198 the FPGA's registers.
199
200 Currently, only 8-bit registers are supported.
201
202endif # PHYLIB
203
204config MICREL_KS8995MA
205 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
206 depends on SPI