Loading...
1menu "Infrared-port device drivers"
2 depends on IRDA!=n
3
4comment "SIR device drivers"
5
6config IRTTY_SIR
7 tristate "IrTTY (uses Linux serial driver)"
8 depends on IRDA
9 help
10 Say Y here if you want to build support for the IrTTY line
11 discipline. To compile it as a module, choose M here: the module
12 will be called irtty-sir. IrTTY makes it possible to use Linux's
13 own serial driver for all IrDA ports that are 16550 compatible.
14 Most IrDA chips are 16550 compatible so you should probably say Y
15 to this option. Using IrTTY will however limit the speed of the
16 connection to 115200 bps (IrDA SIR mode).
17
18 If unsure, say Y.
19
20config BFIN_SIR
21 tristate "Blackfin SIR on UART"
22 depends on BLACKFIN && IRDA
23 default n
24 help
25 Say Y here if your want to enable SIR function on Blackfin UART
26 devices.
27
28 To activate this driver you can start irattach like:
29 "irattach irda0 -s"
30
31 Saying M, it will be built as a module named bfin_sir.
32
33 Note that you need to turn off one of the serial drivers for SIR
34 to use that UART.
35
36config BFIN_SIR0
37 bool "Blackfin SIR on UART0"
38 depends on BFIN_SIR && !SERIAL_BFIN_UART0
39
40config BFIN_SIR1
41 bool "Blackfin SIR on UART1"
42 depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
43
44config BFIN_SIR2
45 bool "Blackfin SIR on UART2"
46 depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
47
48config BFIN_SIR3
49 bool "Blackfin SIR on UART3"
50 depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
51
52choice
53 prompt "SIR Mode"
54 depends on BFIN_SIR
55 default SIR_BFIN_DMA
56
57config SIR_BFIN_DMA
58 bool "DMA mode"
59 depends on !DMA_UNCACHED_NONE
60
61config SIR_BFIN_PIO
62 bool "PIO mode"
63endchoice
64
65comment "Dongle support"
66
67config SH_SIR
68 tristate "SuperH SIR on UART"
69 depends on IRDA && SUPERH && \
70 (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
71 CPU_SUBTYPE_SH7724)
72 default n
73 help
74 Say Y here if your want to enable SIR function on SuperH UART
75 devices.
76
77config DONGLE
78 bool "Serial dongle support"
79 depends on IRTTY_SIR
80 help
81 Say Y here if you have an infrared device that connects to your
82 computer's serial port. These devices are called dongles. Then say Y
83 or M to the driver for your particular dongle below.
84
85 Note that the answer to this question won't directly affect the
86 kernel: saying N will just cause the configurator to skip all
87 the questions about serial dongles.
88
89config ESI_DONGLE
90 tristate "ESI JetEye PC dongle"
91 depends on IRTTY_SIR && DONGLE && IRDA
92 help
93 Say Y here if you want to build support for the Extended Systems
94 JetEye PC dongle. To compile it as a module, choose M here. The ESI
95 dongle attaches to the normal 9-pin serial port connector, and can
96 currently only be used by IrTTY. To activate support for ESI
97 dongles you will have to start irattach like this:
98 "irattach -d esi".
99
100config ACTISYS_DONGLE
101 tristate "ACTiSYS IR-220L and IR220L+ dongle"
102 depends on IRTTY_SIR && DONGLE && IRDA
103 help
104 Say Y here if you want to build support for the ACTiSYS IR-220L and
105 IR220L+ dongles. To compile it as a module, choose M here. The
106 ACTiSYS dongles attaches to the normal 9-pin serial port connector,
107 and can currently only be used by IrTTY. To activate support for
108 ACTiSYS dongles you will have to start irattach like this:
109 "irattach -d actisys" or "irattach -d actisys+".
110
111config TEKRAM_DONGLE
112 tristate "Tekram IrMate 210B dongle"
113 depends on IRTTY_SIR && DONGLE && IRDA
114 help
115 Say Y here if you want to build support for the Tekram IrMate 210B
116 dongle. To compile it as a module, choose M here. The Tekram dongle
117 attaches to the normal 9-pin serial port connector, and can
118 currently only be used by IrTTY. To activate support for Tekram
119 dongles you will have to start irattach like this:
120 "irattach -d tekram".
121
122config TOIM3232_DONGLE
123 tristate "TOIM3232 IrDa dongle"
124 depends on IRTTY_SIR && DONGLE && IRDA
125 help
126 Say Y here if you want to build support for the Vishay/Temic
127 TOIM3232 and TOIM4232 based dongles.
128 To compile it as a module, choose M here.
129
130config LITELINK_DONGLE
131 tristate "Parallax LiteLink dongle"
132 depends on IRTTY_SIR && DONGLE && IRDA
133 help
134 Say Y here if you want to build support for the Parallax Litelink
135 dongle. To compile it as a module, choose M here. The Parallax
136 dongle attaches to the normal 9-pin serial port connector, and can
137 currently only be used by IrTTY. To activate support for Parallax
138 dongles you will have to start irattach like this:
139 "irattach -d litelink".
140
141config MA600_DONGLE
142 tristate "Mobile Action MA600 dongle"
143 depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
144 help
145 Say Y here if you want to build support for the Mobile Action MA600
146 dongle. To compile it as a module, choose M here. The MA600 dongle
147 attaches to the normal 9-pin serial port connector, and can
148 currently only be used by IrTTY. The driver should also support
149 the MA620 USB version of the dongle, if the integrated USB-to-RS232
150 converter is supported by usbserial. To activate support for
151 MA600 dongle you will have to start irattach like this:
152 "irattach -d ma600".
153
154config GIRBIL_DONGLE
155 tristate "Greenwich GIrBIL dongle"
156 depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
157 help
158 Say Y here if you want to build support for the Greenwich GIrBIL
159 dongle. If you want to compile it as a module, choose M here.
160 The Greenwich dongle attaches to the normal 9-pin serial port
161 connector, and can currently only be used by IrTTY. To activate
162 support for Greenwich dongles you will have to start irattach
163 like this: "irattach -d girbil".
164
165config MCP2120_DONGLE
166 tristate "Microchip MCP2120"
167 depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
168 help
169 Say Y here if you want to build support for the Microchip MCP2120
170 dongle. If you want to compile it as a module, choose M here.
171 The MCP2120 dongle attaches to the normal 9-pin serial port
172 connector, and can currently only be used by IrTTY. To activate
173 support for MCP2120 dongles you will have to start irattach
174 like this: "irattach -d mcp2120".
175
176 You must build this dongle yourself. For more information see:
177 <http://www.eyetap.org/~tangf/irda_sir_linux.html>
178
179config OLD_BELKIN_DONGLE
180 tristate "Old Belkin dongle"
181 depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
182 help
183 Say Y here if you want to build support for the Adaptec Airport 1000
184 and 2000 dongles. If you want to compile it as a module, choose
185 M here. Some information is contained in the comments
186 at the top of <file:drivers/net/irda/old_belkin.c>.
187
188config ACT200L_DONGLE
189 tristate "ACTiSYS IR-200L dongle"
190 depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
191 help
192 Say Y here if you want to build support for the ACTiSYS IR-200L
193 dongle. If you want to compile it as a module, choose M here.
194 The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
195 port connector, and can currently only be used by IrTTY.
196 To activate support for ACTiSYS IR-200L dongle you will have to
197 start irattach like this: "irattach -d act200l".
198
199config KINGSUN_DONGLE
200 tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
201 depends on IRDA && USB && EXPERIMENTAL
202 help
203 Say Y or M here if you want to build support for the KingSun/DonShine
204 DS-620 IrDA-USB bridge device driver.
205
206 This USB bridge does not conform to the IrDA-USB device class
207 specification, and therefore needs its own specific driver. This
208 dongle supports SIR speed only (9600 bps).
209
210 To compile it as a module, choose M here: the module will be called
211 kingsun-sir.
212
213config EP7211_DONGLE
214 tristate "EP7211 I/R support"
215 depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
216 help
217 Say Y here if you want to build support for the Cirrus logic
218 EP7211 chipset's infrared module.
219
220config KSDAZZLE_DONGLE
221 tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
222 depends on IRDA && USB && EXPERIMENTAL
223 help
224 Say Y or M here if you want to build support for the KingSun Dazzle
225 IrDA-USB bridge device driver.
226
227 This USB bridge does not conform to the IrDA-USB device class
228 specification, and therefore needs its own specific driver. This
229 dongle supports SIR speeds only (9600 through 115200 bps).
230
231 To compile it as a module, choose M here: the module will be called
232 ksdazzle-sir.
233
234config KS959_DONGLE
235 tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
236 depends on IRDA && USB && EXPERIMENTAL
237 help
238 Say Y or M here if you want to build support for the KingSun KS-959
239 IrDA-USB bridge device driver.
240
241 This USB bridge does not conform to the IrDA-USB device class
242 specification, and therefore needs its own specific driver. This
243 dongle supports SIR speeds only (9600 through 57600 bps).
244
245 To compile it as a module, choose M here: the module will be called
246 ks959-sir.
247
248comment "FIR device drivers"
249
250config USB_IRDA
251 tristate "IrDA USB dongles"
252 depends on IRDA && USB
253 select FW_LOADER
254 ---help---
255 Say Y here if you want to build support for the USB IrDA FIR Dongle
256 device driver. To compile it as a module, choose M here: the module
257 will be called irda-usb. IrDA-USB support the various IrDA USB
258 dongles available and most of their peculiarities. Those dongles
259 plug in the USB port of your computer, are plug and play, and
260 support SIR and FIR (4Mbps) speeds. On the other hand, those
261 dongles tend to be less efficient than a FIR chipset.
262
263 Please note that the driver is still experimental. And of course,
264 you will need both USB and IrDA support in your kernel...
265
266config SIGMATEL_FIR
267 tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
268 depends on IRDA && USB && EXPERIMENTAL
269 select CRC32
270 ---help---
271 Say Y here if you want to build support for the SigmaTel STIr4200
272 USB IrDA FIR bridge device driver.
273
274 USB bridge based on the SigmaTel STIr4200 don't conform to the
275 IrDA-USB device class specification, and therefore need their
276 own specific driver. Those dongles support SIR and FIR (4Mbps)
277 speeds.
278
279 To compile it as a module, choose M here: the module will be called
280 stir4200.
281
282config NSC_FIR
283 tristate "NSC PC87108/PC87338"
284 depends on IRDA && ISA_DMA_API
285 help
286 Say Y here if you want to build support for the NSC PC87108 and
287 PC87338 IrDA chipsets. This driver supports SIR,
288 MIR and FIR (4Mbps) speeds.
289
290 To compile it as a module, choose M here: the module will be called
291 nsc-ircc.
292
293config WINBOND_FIR
294 tristate "Winbond W83977AF (IR)"
295 depends on IRDA && ISA_DMA_API
296 help
297 Say Y here if you want to build IrDA support for the Winbond
298 W83977AF super-io chipset. This driver should be used for the IrDA
299 chipset in the Corel NetWinder. The driver supports SIR, MIR and
300 FIR (4Mbps) speeds.
301
302 To compile it as a module, choose M here: the module will be called
303 w83977af_ir.
304
305config TOSHIBA_FIR
306 tristate "Toshiba Type-O IR Port"
307 depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
308 help
309 Say Y here if you want to build support for the Toshiba Type-O IR
310 and Donau oboe chipsets. These chipsets are used by the Toshiba
311 Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
312 To compile it as a module, choose M here: the module will be called
313 donauboe.
314
315config AU1000_FIR
316 tristate "Alchemy Au1000 SIR/FIR"
317 depends on SOC_AU1000 && IRDA
318
319config SMC_IRCC_FIR
320 tristate "SMSC IrCC (EXPERIMENTAL)"
321 depends on EXPERIMENTAL && IRDA && ISA_DMA_API
322 help
323 Say Y here if you want to build support for the SMC Infrared
324 Communications Controller. It is used in a wide variety of
325 laptops (Fujitsu, Sony, Compaq and some Toshiba).
326 To compile it as a module, choose M here: the module will be called
327 smsc-ircc2.o.
328
329config ALI_FIR
330 tristate "ALi M5123 FIR (EXPERIMENTAL)"
331 depends on EXPERIMENTAL && IRDA && ISA_DMA_API
332 help
333 Say Y here if you want to build support for the ALi M5123 FIR
334 Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
335 M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
336 SIR, MIR and FIR (4Mbps) speeds.
337
338 To compile it as a module, choose M here: the module will be called
339 ali-ircc.
340
341config VLSI_FIR
342 tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
343 depends on EXPERIMENTAL && IRDA && PCI
344 help
345 Say Y here if you want to build support for the VLSI 82C147
346 PCI-IrDA Controller. This controller is used by the HP OmniBook 800
347 and 5500 notebooks. The driver provides support for SIR, MIR and
348 FIR (4Mbps) speeds.
349
350 To compile it as a module, choose M here: the module will be called
351 vlsi_ir.
352
353config SA1100_FIR
354 tristate "SA1100 Internal IR"
355 depends on ARCH_SA1100 && IRDA
356
357config VIA_FIR
358 tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
359 depends on IRDA && ISA_DMA_API
360 help
361 Say Y here if you want to build support for the VIA VT8231
362 and VIA VT1211 IrDA controllers, found on the motherboards using
363 those VIA chipsets. To use this controller, you will need
364 to plug a specific 5 pins FIR IrDA dongle in the specific
365 motherboard connector. The driver provides support for SIR, MIR
366 and FIR (4Mbps) speeds.
367
368 You will need to specify the 'dongle_id' module parameter to
369 indicate the FIR dongle attached to the controller.
370
371 To compile it as a module, choose M here: the module will be called
372 via-ircc.
373
374config PXA_FICP
375 tristate "Intel PXA2xx Internal FICP"
376 depends on ARCH_PXA && IRDA
377 help
378 Say Y or M here if you want to build support for the PXA2xx
379 built-in IRDA interface which can support both SIR and FIR.
380 This driver relies on platform specific helper routines so
381 available capabilities may vary from one PXA2xx target to
382 another.
383
384config MCS_FIR
385 tristate "MosChip MCS7780 IrDA-USB dongle"
386 depends on IRDA && USB && EXPERIMENTAL
387 select CRC32
388 help
389 Say Y or M here if you want to build support for the MosChip
390 MCS7780 IrDA-USB bridge device driver.
391
392 USB bridge based on the MosChip MCS7780 don't conform to the
393 IrDA-USB device class specification, and therefore need their
394 own specific driver. Those dongles support SIR and FIR (4Mbps)
395 speeds.
396
397 To compile it as a module, choose M here: the module will be called
398 mcs7780.
399
400config SH_IRDA
401 tristate "SuperH IrDA driver"
402 depends on IRDA && ARCH_SHMOBILE
403 help
404 Say Y here if your want to enable SuperH IrDA devices.
405
406endmenu
407
1menu "Infrared-port device drivers"
2 depends on IRDA!=n
3
4comment "SIR device drivers"
5
6config IRTTY_SIR
7 tristate "IrTTY (uses Linux serial driver)"
8 depends on IRDA && TTY
9 help
10 Say Y here if you want to build support for the IrTTY line
11 discipline. To compile it as a module, choose M here: the module
12 will be called irtty-sir. IrTTY makes it possible to use Linux's
13 own serial driver for all IrDA ports that are 16550 compatible.
14 Most IrDA chips are 16550 compatible so you should probably say Y
15 to this option. Using IrTTY will however limit the speed of the
16 connection to 115200 bps (IrDA SIR mode).
17
18 If unsure, say Y.
19
20config BFIN_SIR
21 tristate "Blackfin SIR on UART"
22 depends on BLACKFIN && IRDA
23 default n
24 help
25 Say Y here if your want to enable SIR function on Blackfin UART
26 devices.
27
28 To activate this driver you can start irattach like:
29 "irattach irda0 -s"
30
31 Saying M, it will be built as a module named bfin_sir.
32
33 Note that you need to turn off one of the serial drivers for SIR
34 to use that UART.
35
36config BFIN_SIR0
37 bool "Blackfin SIR on UART0"
38 depends on BFIN_SIR && !SERIAL_BFIN_UART0
39
40config BFIN_SIR1
41 bool "Blackfin SIR on UART1"
42 depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
43
44config BFIN_SIR2
45 bool "Blackfin SIR on UART2"
46 depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
47
48config BFIN_SIR3
49 bool "Blackfin SIR on UART3"
50 depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
51
52choice
53 prompt "SIR Mode"
54 depends on BFIN_SIR
55 default SIR_BFIN_DMA
56
57config SIR_BFIN_DMA
58 bool "DMA mode"
59 depends on !DMA_UNCACHED_NONE
60
61config SIR_BFIN_PIO
62 bool "PIO mode"
63endchoice
64
65config SH_SIR
66 tristate "SuperH SIR on UART"
67 depends on IRDA && SUPERH && \
68 (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
69 CPU_SUBTYPE_SH7724)
70 default n
71 help
72 Say Y here if your want to enable SIR function on SuperH UART
73 devices.
74
75comment "Dongle support"
76
77config DONGLE
78 bool "Serial dongle support"
79 depends on IRTTY_SIR
80 help
81 Say Y here if you have an infrared device that connects to your
82 computer's serial port. These devices are called dongles. Then say Y
83 or M to the driver for your particular dongle below.
84
85 Note that the answer to this question won't directly affect the
86 kernel: saying N will just cause the configurator to skip all
87 the questions about serial dongles.
88
89config ESI_DONGLE
90 tristate "ESI JetEye PC dongle"
91 depends on IRTTY_SIR && DONGLE && IRDA
92 help
93 Say Y here if you want to build support for the Extended Systems
94 JetEye PC dongle. To compile it as a module, choose M here. The ESI
95 dongle attaches to the normal 9-pin serial port connector, and can
96 currently only be used by IrTTY. To activate support for ESI
97 dongles you will have to start irattach like this:
98 "irattach -d esi".
99
100config ACTISYS_DONGLE
101 tristate "ACTiSYS IR-220L and IR220L+ dongle"
102 depends on IRTTY_SIR && DONGLE && IRDA
103 help
104 Say Y here if you want to build support for the ACTiSYS IR-220L and
105 IR220L+ dongles. To compile it as a module, choose M here. The
106 ACTiSYS dongles attaches to the normal 9-pin serial port connector,
107 and can currently only be used by IrTTY. To activate support for
108 ACTiSYS dongles you will have to start irattach like this:
109 "irattach -d actisys" or "irattach -d actisys+".
110
111config TEKRAM_DONGLE
112 tristate "Tekram IrMate 210B dongle"
113 depends on IRTTY_SIR && DONGLE && IRDA
114 help
115 Say Y here if you want to build support for the Tekram IrMate 210B
116 dongle. To compile it as a module, choose M here. The Tekram dongle
117 attaches to the normal 9-pin serial port connector, and can
118 currently only be used by IrTTY. To activate support for Tekram
119 dongles you will have to start irattach like this:
120 "irattach -d tekram".
121
122config TOIM3232_DONGLE
123 tristate "TOIM3232 IrDa dongle"
124 depends on IRTTY_SIR && DONGLE && IRDA
125 help
126 Say Y here if you want to build support for the Vishay/Temic
127 TOIM3232 and TOIM4232 based dongles.
128 To compile it as a module, choose M here.
129
130config LITELINK_DONGLE
131 tristate "Parallax LiteLink dongle"
132 depends on IRTTY_SIR && DONGLE && IRDA
133 help
134 Say Y here if you want to build support for the Parallax Litelink
135 dongle. To compile it as a module, choose M here. The Parallax
136 dongle attaches to the normal 9-pin serial port connector, and can
137 currently only be used by IrTTY. To activate support for Parallax
138 dongles you will have to start irattach like this:
139 "irattach -d litelink".
140
141config MA600_DONGLE
142 tristate "Mobile Action MA600 dongle"
143 depends on IRTTY_SIR && DONGLE && IRDA
144 help
145 Say Y here if you want to build support for the Mobile Action MA600
146 dongle. To compile it as a module, choose M here. The MA600 dongle
147 attaches to the normal 9-pin serial port connector, and can
148 currently only be used by IrTTY. The driver should also support
149 the MA620 USB version of the dongle, if the integrated USB-to-RS232
150 converter is supported by usbserial. To activate support for
151 MA600 dongle you will have to start irattach like this:
152 "irattach -d ma600".
153
154config GIRBIL_DONGLE
155 tristate "Greenwich GIrBIL dongle"
156 depends on IRTTY_SIR && DONGLE && IRDA
157 help
158 Say Y here if you want to build support for the Greenwich GIrBIL
159 dongle. If you want to compile it as a module, choose M here.
160 The Greenwich dongle attaches to the normal 9-pin serial port
161 connector, and can currently only be used by IrTTY. To activate
162 support for Greenwich dongles you will have to start irattach
163 like this: "irattach -d girbil".
164
165config MCP2120_DONGLE
166 tristate "Microchip MCP2120"
167 depends on IRTTY_SIR && DONGLE && IRDA
168 help
169 Say Y here if you want to build support for the Microchip MCP2120
170 dongle. If you want to compile it as a module, choose M here.
171 The MCP2120 dongle attaches to the normal 9-pin serial port
172 connector, and can currently only be used by IrTTY. To activate
173 support for MCP2120 dongles you will have to start irattach
174 like this: "irattach -d mcp2120".
175
176 You must build this dongle yourself. For more information see:
177 <http://www.eyetap.org/~tangf/irda_sir_linux.html>
178
179config OLD_BELKIN_DONGLE
180 tristate "Old Belkin dongle"
181 depends on IRTTY_SIR && DONGLE && IRDA
182 help
183 Say Y here if you want to build support for the Adaptec Airport 1000
184 and 2000 dongles. If you want to compile it as a module, choose
185 M here. Some information is contained in the comments
186 at the top of <file:drivers/net/irda/old_belkin-sir.c>.
187
188config ACT200L_DONGLE
189 tristate "ACTiSYS IR-200L dongle"
190 depends on IRTTY_SIR && DONGLE && IRDA
191 help
192 Say Y here if you want to build support for the ACTiSYS IR-200L
193 dongle. If you want to compile it as a module, choose M here.
194 The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
195 port connector, and can currently only be used by IrTTY.
196 To activate support for ACTiSYS IR-200L dongle you will have to
197 start irattach like this: "irattach -d act200l".
198
199config KINGSUN_DONGLE
200 tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
201 depends on IRDA && USB
202 help
203 Say Y or M here if you want to build support for the KingSun/DonShine
204 DS-620 IrDA-USB bridge device driver.
205
206 This USB bridge does not conform to the IrDA-USB device class
207 specification, and therefore needs its own specific driver. This
208 dongle supports SIR speed only (9600 bps).
209
210 To compile it as a module, choose M here: the module will be called
211 kingsun-sir.
212
213config KSDAZZLE_DONGLE
214 tristate "KingSun Dazzle IrDA-USB dongle"
215 depends on IRDA && USB
216 help
217 Say Y or M here if you want to build support for the KingSun Dazzle
218 IrDA-USB bridge device driver.
219
220 This USB bridge does not conform to the IrDA-USB device class
221 specification, and therefore needs its own specific driver. This
222 dongle supports SIR speeds only (9600 through 115200 bps).
223
224 To compile it as a module, choose M here: the module will be called
225 ksdazzle-sir.
226
227config KS959_DONGLE
228 tristate "KingSun KS-959 IrDA-USB dongle"
229 depends on IRDA && USB
230 help
231 Say Y or M here if you want to build support for the KingSun KS-959
232 IrDA-USB bridge device driver.
233
234 This USB bridge does not conform to the IrDA-USB device class
235 specification, and therefore needs its own specific driver. This
236 dongle supports SIR speeds only (9600 through 57600 bps).
237
238 To compile it as a module, choose M here: the module will be called
239 ks959-sir.
240
241comment "FIR device drivers"
242
243config USB_IRDA
244 tristate "IrDA USB dongles"
245 depends on IRDA && USB
246 select FW_LOADER
247 ---help---
248 Say Y here if you want to build support for the USB IrDA FIR Dongle
249 device driver. To compile it as a module, choose M here: the module
250 will be called irda-usb. IrDA-USB support the various IrDA USB
251 dongles available and most of their peculiarities. Those dongles
252 plug in the USB port of your computer, are plug and play, and
253 support SIR and FIR (4Mbps) speeds. On the other hand, those
254 dongles tend to be less efficient than a FIR chipset.
255
256 Please note that the driver is still experimental. And of course,
257 you will need both USB and IrDA support in your kernel...
258
259config SIGMATEL_FIR
260 tristate "SigmaTel STIr4200 bridge"
261 depends on IRDA && USB
262 select CRC32
263 ---help---
264 Say Y here if you want to build support for the SigmaTel STIr4200
265 USB IrDA FIR bridge device driver.
266
267 USB bridge based on the SigmaTel STIr4200 don't conform to the
268 IrDA-USB device class specification, and therefore need their
269 own specific driver. Those dongles support SIR and FIR (4Mbps)
270 speeds.
271
272 To compile it as a module, choose M here: the module will be called
273 stir4200.
274
275config NSC_FIR
276 tristate "NSC PC87108/PC87338"
277 depends on IRDA && ISA_DMA_API
278 help
279 Say Y here if you want to build support for the NSC PC87108 and
280 PC87338 IrDA chipsets. This driver supports SIR,
281 MIR and FIR (4Mbps) speeds.
282
283 To compile it as a module, choose M here: the module will be called
284 nsc-ircc.
285
286config WINBOND_FIR
287 tristate "Winbond W83977AF (IR)"
288 depends on IRDA && ISA_DMA_API
289 help
290 Say Y here if you want to build IrDA support for the Winbond
291 W83977AF super-io chipset. This driver should be used for the IrDA
292 chipset in the Corel NetWinder. The driver supports SIR, MIR and
293 FIR (4Mbps) speeds.
294
295 To compile it as a module, choose M here: the module will be called
296 w83977af_ir.
297
298config TOSHIBA_FIR
299 tristate "Toshiba Type-O IR Port"
300 depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
301 help
302 Say Y here if you want to build support for the Toshiba Type-O IR
303 and Donau oboe chipsets. These chipsets are used by the Toshiba
304 Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
305 To compile it as a module, choose M here: the module will be called
306 donauboe.
307
308config AU1000_FIR
309 tristate "Alchemy IrDA SIR/FIR"
310 depends on IRDA && MIPS_ALCHEMY
311 help
312 Say Y/M here to build support the IrDA peripheral on the
313 Alchemy Au1000 and Au1100 SoCs.
314 Say M to build a module; it will be called au1k_ir.ko
315
316config SMC_IRCC_FIR
317 tristate "SMSC IrCC"
318 depends on IRDA && ISA_DMA_API
319 help
320 Say Y here if you want to build support for the SMC Infrared
321 Communications Controller. It is used in a wide variety of
322 laptops (Fujitsu, Sony, Compaq and some Toshiba).
323 To compile it as a module, choose M here: the module will be called
324 smsc-ircc2.o.
325
326config ALI_FIR
327 tristate "ALi M5123 FIR"
328 depends on IRDA && ISA_DMA_API
329 help
330 Say Y here if you want to build support for the ALi M5123 FIR
331 Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
332 M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
333 SIR, MIR and FIR (4Mbps) speeds.
334
335 To compile it as a module, choose M here: the module will be called
336 ali-ircc.
337
338config VLSI_FIR
339 tristate "VLSI 82C147 SIR/MIR/FIR"
340 depends on IRDA && PCI
341 help
342 Say Y here if you want to build support for the VLSI 82C147
343 PCI-IrDA Controller. This controller is used by the HP OmniBook 800
344 and 5500 notebooks. The driver provides support for SIR, MIR and
345 FIR (4Mbps) speeds.
346
347 To compile it as a module, choose M here: the module will be called
348 vlsi_ir.
349
350config SA1100_FIR
351 tristate "SA1100 Internal IR"
352 depends on ARCH_SA1100 && IRDA && DMA_SA11X0
353
354config VIA_FIR
355 tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
356 depends on IRDA && ISA_DMA_API
357 help
358 Say Y here if you want to build support for the VIA VT8231
359 and VIA VT1211 IrDA controllers, found on the motherboards using
360 those VIA chipsets. To use this controller, you will need
361 to plug a specific 5 pins FIR IrDA dongle in the specific
362 motherboard connector. The driver provides support for SIR, MIR
363 and FIR (4Mbps) speeds.
364
365 You will need to specify the 'dongle_id' module parameter to
366 indicate the FIR dongle attached to the controller.
367
368 To compile it as a module, choose M here: the module will be called
369 via-ircc.
370
371config PXA_FICP
372 tristate "Intel PXA2xx Internal FICP"
373 depends on ARCH_PXA && IRDA
374 help
375 Say Y or M here if you want to build support for the PXA2xx
376 built-in IRDA interface which can support both SIR and FIR.
377 This driver relies on platform specific helper routines so
378 available capabilities may vary from one PXA2xx target to
379 another.
380
381config MCS_FIR
382 tristate "MosChip MCS7780 IrDA-USB dongle"
383 depends on IRDA && USB
384 select CRC32
385 help
386 Say Y or M here if you want to build support for the MosChip
387 MCS7780 IrDA-USB bridge device driver.
388
389 USB bridge based on the MosChip MCS7780 don't conform to the
390 IrDA-USB device class specification, and therefore need their
391 own specific driver. Those dongles support SIR and FIR (4Mbps)
392 speeds.
393
394 To compile it as a module, choose M here: the module will be called
395 mcs7780.
396
397config SH_IRDA
398 tristate "SuperH IrDA driver"
399 depends on IRDA && ARCH_SHMOBILE
400 help
401 Say Y here if your want to enable SuperH IrDA devices.
402
403endmenu
404