Loading...
1/*
2 * Low-Level PCI Support for PC -- Routing of Interrupts
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/types.h>
8#include <linux/kernel.h>
9#include <linux/pci.h>
10#include <linux/init.h>
11#include <linux/interrupt.h>
12#include <linux/dmi.h>
13#include <linux/io.h>
14#include <linux/smp.h>
15#include <asm/io_apic.h>
16#include <linux/irq.h>
17#include <linux/acpi.h>
18#include <asm/pci_x86.h>
19
20#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
21#define PIRQ_VERSION 0x0100
22
23static int broken_hp_bios_irq9;
24static int acer_tm360_irqrouting;
25
26static struct irq_routing_table *pirq_table;
27
28static int pirq_enable_irq(struct pci_dev *dev);
29
30/*
31 * Never use: 0, 1, 2 (timer, keyboard, and cascade)
32 * Avoid using: 13, 14 and 15 (FP error and IDE).
33 * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse)
34 */
35unsigned int pcibios_irq_mask = 0xfff8;
36
37static int pirq_penalty[16] = {
38 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
39 0, 0, 0, 0, 1000, 100000, 100000, 100000
40};
41
42struct irq_router {
43 char *name;
44 u16 vendor, device;
45 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
46 int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
47 int new);
48};
49
50struct irq_router_handler {
51 u16 vendor;
52 int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
53};
54
55int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq;
56void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
57
58/*
59 * Check passed address for the PCI IRQ Routing Table signature
60 * and perform checksum verification.
61 */
62
63static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
64{
65 struct irq_routing_table *rt;
66 int i;
67 u8 sum;
68
69 rt = (struct irq_routing_table *) addr;
70 if (rt->signature != PIRQ_SIGNATURE ||
71 rt->version != PIRQ_VERSION ||
72 rt->size % 16 ||
73 rt->size < sizeof(struct irq_routing_table))
74 return NULL;
75 sum = 0;
76 for (i = 0; i < rt->size; i++)
77 sum += addr[i];
78 if (!sum) {
79 DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
80 rt);
81 return rt;
82 }
83 return NULL;
84}
85
86
87
88/*
89 * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
90 */
91
92static struct irq_routing_table * __init pirq_find_routing_table(void)
93{
94 u8 *addr;
95 struct irq_routing_table *rt;
96
97 if (pirq_table_addr) {
98 rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
99 if (rt)
100 return rt;
101 printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
102 }
103 for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
104 rt = pirq_check_routing_table(addr);
105 if (rt)
106 return rt;
107 }
108 return NULL;
109}
110
111/*
112 * If we have a IRQ routing table, use it to search for peer host
113 * bridges. It's a gross hack, but since there are no other known
114 * ways how to get a list of buses, we have to go this way.
115 */
116
117static void __init pirq_peer_trick(void)
118{
119 struct irq_routing_table *rt = pirq_table;
120 u8 busmap[256];
121 int i;
122 struct irq_info *e;
123
124 memset(busmap, 0, sizeof(busmap));
125 for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
126 e = &rt->slots[i];
127#ifdef DEBUG
128 {
129 int j;
130 DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
131 for (j = 0; j < 4; j++)
132 DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
133 DBG("\n");
134 }
135#endif
136 busmap[e->bus] = 1;
137 }
138 for (i = 1; i < 256; i++) {
139 int node;
140 if (!busmap[i] || pci_find_bus(0, i))
141 continue;
142 node = get_mp_bus_to_node(i);
143 if (pci_scan_bus_on_node(i, &pci_root_ops, node))
144 printk(KERN_INFO "PCI: Discovered primary peer "
145 "bus %02x [IRQ]\n", i);
146 }
147 pcibios_last_bus = -1;
148}
149
150/*
151 * Code for querying and setting of IRQ routes on various interrupt routers.
152 */
153
154void eisa_set_level_irq(unsigned int irq)
155{
156 unsigned char mask = 1 << (irq & 7);
157 unsigned int port = 0x4d0 + (irq >> 3);
158 unsigned char val;
159 static u16 eisa_irq_mask;
160
161 if (irq >= 16 || (1 << irq) & eisa_irq_mask)
162 return;
163
164 eisa_irq_mask |= (1 << irq);
165 printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
166 val = inb(port);
167 if (!(val & mask)) {
168 DBG(KERN_DEBUG " -> edge");
169 outb(val | mask, port);
170 }
171}
172
173/*
174 * Common IRQ routing practice: nibbles in config space,
175 * offset by some magic constant.
176 */
177static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
178{
179 u8 x;
180 unsigned reg = offset + (nr >> 1);
181
182 pci_read_config_byte(router, reg, &x);
183 return (nr & 1) ? (x >> 4) : (x & 0xf);
184}
185
186static void write_config_nybble(struct pci_dev *router, unsigned offset,
187 unsigned nr, unsigned int val)
188{
189 u8 x;
190 unsigned reg = offset + (nr >> 1);
191
192 pci_read_config_byte(router, reg, &x);
193 x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val);
194 pci_write_config_byte(router, reg, x);
195}
196
197/*
198 * ALI pirq entries are damn ugly, and completely undocumented.
199 * This has been figured out from pirq tables, and it's not a pretty
200 * picture.
201 */
202static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
203{
204 static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
205
206 WARN_ON_ONCE(pirq > 16);
207 return irqmap[read_config_nybble(router, 0x48, pirq-1)];
208}
209
210static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
211{
212 static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
213 unsigned int val = irqmap[irq];
214
215 WARN_ON_ONCE(pirq > 16);
216 if (val) {
217 write_config_nybble(router, 0x48, pirq-1, val);
218 return 1;
219 }
220 return 0;
221}
222
223/*
224 * The Intel PIIX4 pirq rules are fairly simple: "pirq" is
225 * just a pointer to the config space.
226 */
227static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
228{
229 u8 x;
230
231 pci_read_config_byte(router, pirq, &x);
232 return (x < 16) ? x : 0;
233}
234
235static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
236{
237 pci_write_config_byte(router, pirq, irq);
238 return 1;
239}
240
241/*
242 * The VIA pirq rules are nibble-based, like ALI,
243 * but without the ugly irq number munging.
244 * However, PIRQD is in the upper instead of lower 4 bits.
245 */
246static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
247{
248 return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq);
249}
250
251static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
252{
253 write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
254 return 1;
255}
256
257/*
258 * The VIA pirq rules are nibble-based, like ALI,
259 * but without the ugly irq number munging.
260 * However, for 82C586, nibble map is different .
261 */
262static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
263{
264 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
265
266 WARN_ON_ONCE(pirq > 5);
267 return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
268}
269
270static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
271{
272 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
273
274 WARN_ON_ONCE(pirq > 5);
275 write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
276 return 1;
277}
278
279/*
280 * ITE 8330G pirq rules are nibble-based
281 * FIXME: pirqmap may be { 1, 0, 3, 2 },
282 * 2+3 are both mapped to irq 9 on my system
283 */
284static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
285{
286 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
287
288 WARN_ON_ONCE(pirq > 4);
289 return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
290}
291
292static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
293{
294 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
295
296 WARN_ON_ONCE(pirq > 4);
297 write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
298 return 1;
299}
300
301/*
302 * OPTI: high four bits are nibble pointer..
303 * I wonder what the low bits do?
304 */
305static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
306{
307 return read_config_nybble(router, 0xb8, pirq >> 4);
308}
309
310static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
311{
312 write_config_nybble(router, 0xb8, pirq >> 4, irq);
313 return 1;
314}
315
316/*
317 * Cyrix: nibble offset 0x5C
318 * 0x5C bits 7:4 is INTB bits 3:0 is INTA
319 * 0x5D bits 7:4 is INTD bits 3:0 is INTC
320 */
321static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
322{
323 return read_config_nybble(router, 0x5C, (pirq-1)^1);
324}
325
326static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
327{
328 write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
329 return 1;
330}
331
332/*
333 * PIRQ routing for SiS 85C503 router used in several SiS chipsets.
334 * We have to deal with the following issues here:
335 * - vendors have different ideas about the meaning of link values
336 * - some onboard devices (integrated in the chipset) have special
337 * links and are thus routed differently (i.e. not via PCI INTA-INTD)
338 * - different revision of the router have a different layout for
339 * the routing registers, particularly for the onchip devices
340 *
341 * For all routing registers the common thing is we have one byte
342 * per routeable link which is defined as:
343 * bit 7 IRQ mapping enabled (0) or disabled (1)
344 * bits [6:4] reserved (sometimes used for onchip devices)
345 * bits [3:0] IRQ to map to
346 * allowed: 3-7, 9-12, 14-15
347 * reserved: 0, 1, 2, 8, 13
348 *
349 * The config-space registers located at 0x41/0x42/0x43/0x44 are
350 * always used to route the normal PCI INT A/B/C/D respectively.
351 * Apparently there are systems implementing PCI routing table using
352 * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
353 * We try our best to handle both link mappings.
354 *
355 * Currently (2003-05-21) it appears most SiS chipsets follow the
356 * definition of routing registers from the SiS-5595 southbridge.
357 * According to the SiS 5595 datasheets the revision id's of the
358 * router (ISA-bridge) should be 0x01 or 0xb0.
359 *
360 * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1.
361 * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets.
362 * They seem to work with the current routing code. However there is
363 * some concern because of the two USB-OHCI HCs (original SiS 5595
364 * had only one). YMMV.
365 *
366 * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1:
367 *
368 * 0x61: IDEIRQ:
369 * bits [6:5] must be written 01
370 * bit 4 channel-select primary (0), secondary (1)
371 *
372 * 0x62: USBIRQ:
373 * bit 6 OHCI function disabled (0), enabled (1)
374 *
375 * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
376 *
377 * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
378 *
379 * We support USBIRQ (in addition to INTA-INTD) and keep the
380 * IDE, ACPI and DAQ routing untouched as set by the BIOS.
381 *
382 * Currently the only reported exception is the new SiS 65x chipset
383 * which includes the SiS 69x southbridge. Here we have the 85C503
384 * router revision 0x04 and there are changes in the register layout
385 * mostly related to the different USB HCs with USB 2.0 support.
386 *
387 * Onchip routing for router rev-id 0x04 (try-and-error observation)
388 *
389 * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs
390 * bit 6-4 are probably unused, not like 5595
391 */
392
393#define PIRQ_SIS_IRQ_MASK 0x0f
394#define PIRQ_SIS_IRQ_DISABLE 0x80
395#define PIRQ_SIS_USB_ENABLE 0x40
396
397static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
398{
399 u8 x;
400 int reg;
401
402 reg = pirq;
403 if (reg >= 0x01 && reg <= 0x04)
404 reg += 0x40;
405 pci_read_config_byte(router, reg, &x);
406 return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
407}
408
409static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
410{
411 u8 x;
412 int reg;
413
414 reg = pirq;
415 if (reg >= 0x01 && reg <= 0x04)
416 reg += 0x40;
417 pci_read_config_byte(router, reg, &x);
418 x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE);
419 x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE;
420 pci_write_config_byte(router, reg, x);
421 return 1;
422}
423
424
425/*
426 * VLSI: nibble offset 0x74 - educated guess due to routing table and
427 * config space of VLSI 82C534 PCI-bridge/router (1004:0102)
428 * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard
429 * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6
430 * for the busbridge to the docking station.
431 */
432
433static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
434{
435 WARN_ON_ONCE(pirq >= 9);
436 if (pirq > 8) {
437 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
438 return 0;
439 }
440 return read_config_nybble(router, 0x74, pirq-1);
441}
442
443static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
444{
445 WARN_ON_ONCE(pirq >= 9);
446 if (pirq > 8) {
447 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
448 return 0;
449 }
450 write_config_nybble(router, 0x74, pirq-1, irq);
451 return 1;
452}
453
454/*
455 * ServerWorks: PCI interrupts mapped to system IRQ lines through Index
456 * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register
457 * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect
458 * register is a straight binary coding of desired PIC IRQ (low nibble).
459 *
460 * The 'link' value in the PIRQ table is already in the correct format
461 * for the Index register. There are some special index values:
462 * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1,
463 * and 0x03 for SMBus.
464 */
465static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
466{
467 outb(pirq, 0xc00);
468 return inb(0xc01) & 0xf;
469}
470
471static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
472 int pirq, int irq)
473{
474 outb(pirq, 0xc00);
475 outb(irq, 0xc01);
476 return 1;
477}
478
479/* Support for AMD756 PCI IRQ Routing
480 * Jhon H. Caicedo <jhcaiced@osso.org.co>
481 * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced)
482 * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced)
483 * The AMD756 pirq rules are nibble-based
484 * offset 0x56 0-3 PIRQA 4-7 PIRQB
485 * offset 0x57 0-3 PIRQC 4-7 PIRQD
486 */
487static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
488{
489 u8 irq;
490 irq = 0;
491 if (pirq <= 4)
492 irq = read_config_nybble(router, 0x56, pirq - 1);
493 dev_info(&dev->dev,
494 "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n",
495 dev->vendor, dev->device, pirq, irq);
496 return irq;
497}
498
499static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
500{
501 dev_info(&dev->dev,
502 "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n",
503 dev->vendor, dev->device, pirq, irq);
504 if (pirq <= 4)
505 write_config_nybble(router, 0x56, pirq - 1, irq);
506 return 1;
507}
508
509/*
510 * PicoPower PT86C523
511 */
512static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
513{
514 outb(0x10 + ((pirq - 1) >> 1), 0x24);
515 return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf);
516}
517
518static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
519 int irq)
520{
521 unsigned int x;
522 outb(0x10 + ((pirq - 1) >> 1), 0x24);
523 x = inb(0x26);
524 x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq));
525 outb(x, 0x26);
526 return 1;
527}
528
529#ifdef CONFIG_PCI_BIOS
530
531static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
532{
533 struct pci_dev *bridge;
534 int pin = pci_get_interrupt_pin(dev, &bridge);
535 return pcibios_set_irq_routing(bridge, pin - 1, irq);
536}
537
538#endif
539
540static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
541{
542 static struct pci_device_id __initdata pirq_440gx[] = {
543 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) },
544 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) },
545 { },
546 };
547
548 /* 440GX has a proprietary PIRQ router -- don't use it */
549 if (pci_dev_present(pirq_440gx))
550 return 0;
551
552 switch (device) {
553 case PCI_DEVICE_ID_INTEL_82371FB_0:
554 case PCI_DEVICE_ID_INTEL_82371SB_0:
555 case PCI_DEVICE_ID_INTEL_82371AB_0:
556 case PCI_DEVICE_ID_INTEL_82371MX:
557 case PCI_DEVICE_ID_INTEL_82443MX_0:
558 case PCI_DEVICE_ID_INTEL_82801AA_0:
559 case PCI_DEVICE_ID_INTEL_82801AB_0:
560 case PCI_DEVICE_ID_INTEL_82801BA_0:
561 case PCI_DEVICE_ID_INTEL_82801BA_10:
562 case PCI_DEVICE_ID_INTEL_82801CA_0:
563 case PCI_DEVICE_ID_INTEL_82801CA_12:
564 case PCI_DEVICE_ID_INTEL_82801DB_0:
565 case PCI_DEVICE_ID_INTEL_82801E_0:
566 case PCI_DEVICE_ID_INTEL_82801EB_0:
567 case PCI_DEVICE_ID_INTEL_ESB_1:
568 case PCI_DEVICE_ID_INTEL_ICH6_0:
569 case PCI_DEVICE_ID_INTEL_ICH6_1:
570 case PCI_DEVICE_ID_INTEL_ICH7_0:
571 case PCI_DEVICE_ID_INTEL_ICH7_1:
572 case PCI_DEVICE_ID_INTEL_ICH7_30:
573 case PCI_DEVICE_ID_INTEL_ICH7_31:
574 case PCI_DEVICE_ID_INTEL_TGP_LPC:
575 case PCI_DEVICE_ID_INTEL_ESB2_0:
576 case PCI_DEVICE_ID_INTEL_ICH8_0:
577 case PCI_DEVICE_ID_INTEL_ICH8_1:
578 case PCI_DEVICE_ID_INTEL_ICH8_2:
579 case PCI_DEVICE_ID_INTEL_ICH8_3:
580 case PCI_DEVICE_ID_INTEL_ICH8_4:
581 case PCI_DEVICE_ID_INTEL_ICH9_0:
582 case PCI_DEVICE_ID_INTEL_ICH9_1:
583 case PCI_DEVICE_ID_INTEL_ICH9_2:
584 case PCI_DEVICE_ID_INTEL_ICH9_3:
585 case PCI_DEVICE_ID_INTEL_ICH9_4:
586 case PCI_DEVICE_ID_INTEL_ICH9_5:
587 case PCI_DEVICE_ID_INTEL_EP80579_0:
588 case PCI_DEVICE_ID_INTEL_ICH10_0:
589 case PCI_DEVICE_ID_INTEL_ICH10_1:
590 case PCI_DEVICE_ID_INTEL_ICH10_2:
591 case PCI_DEVICE_ID_INTEL_ICH10_3:
592 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0:
593 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1:
594 r->name = "PIIX/ICH";
595 r->get = pirq_piix_get;
596 r->set = pirq_piix_set;
597 return 1;
598 }
599
600 if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN &&
601 device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX)
602 || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
603 device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)
604 || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN &&
605 device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)
606 || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
607 device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) {
608 r->name = "PIIX/ICH";
609 r->get = pirq_piix_get;
610 r->set = pirq_piix_set;
611 return 1;
612 }
613
614 return 0;
615}
616
617static __init int via_router_probe(struct irq_router *r,
618 struct pci_dev *router, u16 device)
619{
620 /* FIXME: We should move some of the quirk fixup stuff here */
621
622 /*
623 * workarounds for some buggy BIOSes
624 */
625 if (device == PCI_DEVICE_ID_VIA_82C586_0) {
626 switch (router->device) {
627 case PCI_DEVICE_ID_VIA_82C686:
628 /*
629 * Asus k7m bios wrongly reports 82C686A
630 * as 586-compatible
631 */
632 device = PCI_DEVICE_ID_VIA_82C686;
633 break;
634 case PCI_DEVICE_ID_VIA_8235:
635 /**
636 * Asus a7v-x bios wrongly reports 8235
637 * as 586-compatible
638 */
639 device = PCI_DEVICE_ID_VIA_8235;
640 break;
641 case PCI_DEVICE_ID_VIA_8237:
642 /**
643 * Asus a7v600 bios wrongly reports 8237
644 * as 586-compatible
645 */
646 device = PCI_DEVICE_ID_VIA_8237;
647 break;
648 }
649 }
650
651 switch (device) {
652 case PCI_DEVICE_ID_VIA_82C586_0:
653 r->name = "VIA";
654 r->get = pirq_via586_get;
655 r->set = pirq_via586_set;
656 return 1;
657 case PCI_DEVICE_ID_VIA_82C596:
658 case PCI_DEVICE_ID_VIA_82C686:
659 case PCI_DEVICE_ID_VIA_8231:
660 case PCI_DEVICE_ID_VIA_8233A:
661 case PCI_DEVICE_ID_VIA_8235:
662 case PCI_DEVICE_ID_VIA_8237:
663 /* FIXME: add new ones for 8233/5 */
664 r->name = "VIA";
665 r->get = pirq_via_get;
666 r->set = pirq_via_set;
667 return 1;
668 }
669 return 0;
670}
671
672static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
673{
674 switch (device) {
675 case PCI_DEVICE_ID_VLSI_82C534:
676 r->name = "VLSI 82C534";
677 r->get = pirq_vlsi_get;
678 r->set = pirq_vlsi_set;
679 return 1;
680 }
681 return 0;
682}
683
684
685static __init int serverworks_router_probe(struct irq_router *r,
686 struct pci_dev *router, u16 device)
687{
688 switch (device) {
689 case PCI_DEVICE_ID_SERVERWORKS_OSB4:
690 case PCI_DEVICE_ID_SERVERWORKS_CSB5:
691 r->name = "ServerWorks";
692 r->get = pirq_serverworks_get;
693 r->set = pirq_serverworks_set;
694 return 1;
695 }
696 return 0;
697}
698
699static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
700{
701 if (device != PCI_DEVICE_ID_SI_503)
702 return 0;
703
704 r->name = "SIS";
705 r->get = pirq_sis_get;
706 r->set = pirq_sis_set;
707 return 1;
708}
709
710static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
711{
712 switch (device) {
713 case PCI_DEVICE_ID_CYRIX_5520:
714 r->name = "NatSemi";
715 r->get = pirq_cyrix_get;
716 r->set = pirq_cyrix_set;
717 return 1;
718 }
719 return 0;
720}
721
722static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
723{
724 switch (device) {
725 case PCI_DEVICE_ID_OPTI_82C700:
726 r->name = "OPTI";
727 r->get = pirq_opti_get;
728 r->set = pirq_opti_set;
729 return 1;
730 }
731 return 0;
732}
733
734static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
735{
736 switch (device) {
737 case PCI_DEVICE_ID_ITE_IT8330G_0:
738 r->name = "ITE";
739 r->get = pirq_ite_get;
740 r->set = pirq_ite_set;
741 return 1;
742 }
743 return 0;
744}
745
746static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
747{
748 switch (device) {
749 case PCI_DEVICE_ID_AL_M1533:
750 case PCI_DEVICE_ID_AL_M1563:
751 r->name = "ALI";
752 r->get = pirq_ali_get;
753 r->set = pirq_ali_set;
754 return 1;
755 }
756 return 0;
757}
758
759static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
760{
761 switch (device) {
762 case PCI_DEVICE_ID_AMD_VIPER_740B:
763 r->name = "AMD756";
764 break;
765 case PCI_DEVICE_ID_AMD_VIPER_7413:
766 r->name = "AMD766";
767 break;
768 case PCI_DEVICE_ID_AMD_VIPER_7443:
769 r->name = "AMD768";
770 break;
771 default:
772 return 0;
773 }
774 r->get = pirq_amd756_get;
775 r->set = pirq_amd756_set;
776 return 1;
777}
778
779static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
780{
781 switch (device) {
782 case PCI_DEVICE_ID_PICOPOWER_PT86C523:
783 r->name = "PicoPower PT86C523";
784 r->get = pirq_pico_get;
785 r->set = pirq_pico_set;
786 return 1;
787
788 case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
789 r->name = "PicoPower PT86C523 rev. BB+";
790 r->get = pirq_pico_get;
791 r->set = pirq_pico_set;
792 return 1;
793 }
794 return 0;
795}
796
797static __initdata struct irq_router_handler pirq_routers[] = {
798 { PCI_VENDOR_ID_INTEL, intel_router_probe },
799 { PCI_VENDOR_ID_AL, ali_router_probe },
800 { PCI_VENDOR_ID_ITE, ite_router_probe },
801 { PCI_VENDOR_ID_VIA, via_router_probe },
802 { PCI_VENDOR_ID_OPTI, opti_router_probe },
803 { PCI_VENDOR_ID_SI, sis_router_probe },
804 { PCI_VENDOR_ID_CYRIX, cyrix_router_probe },
805 { PCI_VENDOR_ID_VLSI, vlsi_router_probe },
806 { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
807 { PCI_VENDOR_ID_AMD, amd_router_probe },
808 { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
809 /* Someone with docs needs to add the ATI Radeon IGP */
810 { 0, NULL }
811};
812static struct irq_router pirq_router;
813static struct pci_dev *pirq_router_dev;
814
815
816/*
817 * FIXME: should we have an option to say "generic for
818 * chipset" ?
819 */
820
821static void __init pirq_find_router(struct irq_router *r)
822{
823 struct irq_routing_table *rt = pirq_table;
824 struct irq_router_handler *h;
825
826#ifdef CONFIG_PCI_BIOS
827 if (!rt->signature) {
828 printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
829 r->set = pirq_bios_set;
830 r->name = "BIOS";
831 return;
832 }
833#endif
834
835 /* Default unless a driver reloads it */
836 r->name = "default";
837 r->get = NULL;
838 r->set = NULL;
839
840 DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n",
841 rt->rtr_vendor, rt->rtr_device);
842
843 pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn);
844 if (!pirq_router_dev) {
845 DBG(KERN_DEBUG "PCI: Interrupt router not found at "
846 "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
847 return;
848 }
849
850 for (h = pirq_routers; h->vendor; h++) {
851 /* First look for a router match */
852 if (rt->rtr_vendor == h->vendor &&
853 h->probe(r, pirq_router_dev, rt->rtr_device))
854 break;
855 /* Fall back to a device match */
856 if (pirq_router_dev->vendor == h->vendor &&
857 h->probe(r, pirq_router_dev, pirq_router_dev->device))
858 break;
859 }
860 dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n",
861 pirq_router.name,
862 pirq_router_dev->vendor, pirq_router_dev->device);
863
864 /* The device remains referenced for the kernel lifetime */
865}
866
867static struct irq_info *pirq_get_info(struct pci_dev *dev)
868{
869 struct irq_routing_table *rt = pirq_table;
870 int entries = (rt->size - sizeof(struct irq_routing_table)) /
871 sizeof(struct irq_info);
872 struct irq_info *info;
873
874 for (info = rt->slots; entries--; info++)
875 if (info->bus == dev->bus->number &&
876 PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
877 return info;
878 return NULL;
879}
880
881static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
882{
883 u8 pin;
884 struct irq_info *info;
885 int i, pirq, newirq;
886 int irq = 0;
887 u32 mask;
888 struct irq_router *r = &pirq_router;
889 struct pci_dev *dev2 = NULL;
890 char *msg = NULL;
891
892 /* Find IRQ pin */
893 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
894 if (!pin) {
895 dev_dbg(&dev->dev, "no interrupt pin\n");
896 return 0;
897 }
898
899 if (io_apic_assign_pci_irqs)
900 return 0;
901
902 /* Find IRQ routing entry */
903
904 if (!pirq_table)
905 return 0;
906
907 info = pirq_get_info(dev);
908 if (!info) {
909 dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
910 'A' + pin - 1);
911 return 0;
912 }
913 pirq = info->irq[pin - 1].link;
914 mask = info->irq[pin - 1].bitmap;
915 if (!pirq) {
916 dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin - 1);
917 return 0;
918 }
919 dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
920 'A' + pin - 1, pirq, mask, pirq_table->exclusive_irqs);
921 mask &= pcibios_irq_mask;
922
923 /* Work around broken HP Pavilion Notebooks which assign USB to
924 IRQ 9 even though it is actually wired to IRQ 11 */
925
926 if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) {
927 dev->irq = 11;
928 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
929 r->set(pirq_router_dev, dev, pirq, 11);
930 }
931
932 /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
933 if (acer_tm360_irqrouting && dev->irq == 11 &&
934 dev->vendor == PCI_VENDOR_ID_O2) {
935 pirq = 0x68;
936 mask = 0x400;
937 dev->irq = r->get(pirq_router_dev, dev, pirq);
938 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
939 }
940
941 /*
942 * Find the best IRQ to assign: use the one
943 * reported by the device if possible.
944 */
945 newirq = dev->irq;
946 if (newirq && !((1 << newirq) & mask)) {
947 if (pci_probe & PCI_USE_PIRQ_MASK)
948 newirq = 0;
949 else
950 dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
951 "%#x; try pci=usepirqmask\n", newirq, mask);
952 }
953 if (!newirq && assign) {
954 for (i = 0; i < 16; i++) {
955 if (!(mask & (1 << i)))
956 continue;
957 if (pirq_penalty[i] < pirq_penalty[newirq] &&
958 can_request_irq(i, IRQF_SHARED))
959 newirq = i;
960 }
961 }
962 dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin - 1, newirq);
963
964 /* Check if it is hardcoded */
965 if ((pirq & 0xf0) == 0xf0) {
966 irq = pirq & 0xf;
967 msg = "hardcoded";
968 } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
969 ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
970 msg = "found";
971 eisa_set_level_irq(irq);
972 } else if (newirq && r->set &&
973 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
974 if (r->set(pirq_router_dev, dev, pirq, newirq)) {
975 eisa_set_level_irq(newirq);
976 msg = "assigned";
977 irq = newirq;
978 }
979 }
980
981 if (!irq) {
982 if (newirq && mask == (1 << newirq)) {
983 msg = "guessed";
984 irq = newirq;
985 } else {
986 dev_dbg(&dev->dev, "can't route interrupt\n");
987 return 0;
988 }
989 }
990 dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq);
991
992 /* Update IRQ for all devices with the same pirq value */
993 for_each_pci_dev(dev2) {
994 pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin);
995 if (!pin)
996 continue;
997
998 info = pirq_get_info(dev2);
999 if (!info)
1000 continue;
1001 if (info->irq[pin - 1].link == pirq) {
1002 /*
1003 * We refuse to override the dev->irq
1004 * information. Give a warning!
1005 */
1006 if (dev2->irq && dev2->irq != irq && \
1007 (!(pci_probe & PCI_USE_PIRQ_MASK) || \
1008 ((1 << dev2->irq) & mask))) {
1009#ifndef CONFIG_PCI_MSI
1010 dev_info(&dev2->dev, "IRQ routing conflict: "
1011 "have IRQ %d, want IRQ %d\n",
1012 dev2->irq, irq);
1013#endif
1014 continue;
1015 }
1016 dev2->irq = irq;
1017 pirq_penalty[irq]++;
1018 if (dev != dev2)
1019 dev_info(&dev->dev, "sharing IRQ %d with %s\n",
1020 irq, pci_name(dev2));
1021 }
1022 }
1023 return 1;
1024}
1025
1026void __init pcibios_fixup_irqs(void)
1027{
1028 struct pci_dev *dev = NULL;
1029 u8 pin;
1030
1031 DBG(KERN_DEBUG "PCI: IRQ fixup\n");
1032 for_each_pci_dev(dev) {
1033 /*
1034 * If the BIOS has set an out of range IRQ number, just
1035 * ignore it. Also keep track of which IRQ's are
1036 * already in use.
1037 */
1038 if (dev->irq >= 16) {
1039 dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
1040 dev->irq = 0;
1041 }
1042 /*
1043 * If the IRQ is already assigned to a PCI device,
1044 * ignore its ISA use penalty
1045 */
1046 if (pirq_penalty[dev->irq] >= 100 &&
1047 pirq_penalty[dev->irq] < 100000)
1048 pirq_penalty[dev->irq] = 0;
1049 pirq_penalty[dev->irq]++;
1050 }
1051
1052 if (io_apic_assign_pci_irqs)
1053 return;
1054
1055 dev = NULL;
1056 for_each_pci_dev(dev) {
1057 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
1058 if (!pin)
1059 continue;
1060
1061 /*
1062 * Still no IRQ? Try to lookup one...
1063 */
1064 if (!dev->irq)
1065 pcibios_lookup_irq(dev, 0);
1066 }
1067}
1068
1069/*
1070 * Work around broken HP Pavilion Notebooks which assign USB to
1071 * IRQ 9 even though it is actually wired to IRQ 11
1072 */
1073static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
1074{
1075 if (!broken_hp_bios_irq9) {
1076 broken_hp_bios_irq9 = 1;
1077 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
1078 d->ident);
1079 }
1080 return 0;
1081}
1082
1083/*
1084 * Work around broken Acer TravelMate 360 Notebooks which assign
1085 * Cardbus to IRQ 11 even though it is actually wired to IRQ 10
1086 */
1087static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
1088{
1089 if (!acer_tm360_irqrouting) {
1090 acer_tm360_irqrouting = 1;
1091 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
1092 d->ident);
1093 }
1094 return 0;
1095}
1096
1097static struct dmi_system_id __initdata pciirq_dmi_table[] = {
1098 {
1099 .callback = fix_broken_hp_bios_irq9,
1100 .ident = "HP Pavilion N5400 Series Laptop",
1101 .matches = {
1102 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1103 DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
1104 DMI_MATCH(DMI_PRODUCT_VERSION,
1105 "HP Pavilion Notebook Model GE"),
1106 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
1107 },
1108 },
1109 {
1110 .callback = fix_acer_tm360_irqrouting,
1111 .ident = "Acer TravelMate 36x Laptop",
1112 .matches = {
1113 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
1114 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
1115 },
1116 },
1117 { }
1118};
1119
1120void __init pcibios_irq_init(void)
1121{
1122 DBG(KERN_DEBUG "PCI: IRQ init\n");
1123
1124 if (raw_pci_ops == NULL)
1125 return;
1126
1127 dmi_check_system(pciirq_dmi_table);
1128
1129 pirq_table = pirq_find_routing_table();
1130
1131#ifdef CONFIG_PCI_BIOS
1132 if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN))
1133 pirq_table = pcibios_get_irq_routing_table();
1134#endif
1135 if (pirq_table) {
1136 pirq_peer_trick();
1137 pirq_find_router(&pirq_router);
1138 if (pirq_table->exclusive_irqs) {
1139 int i;
1140 for (i = 0; i < 16; i++)
1141 if (!(pirq_table->exclusive_irqs & (1 << i)))
1142 pirq_penalty[i] += 100;
1143 }
1144 /*
1145 * If we're using the I/O APIC, avoid using the PCI IRQ
1146 * routing table
1147 */
1148 if (io_apic_assign_pci_irqs)
1149 pirq_table = NULL;
1150 }
1151
1152 x86_init.pci.fixup_irqs();
1153
1154 if (io_apic_assign_pci_irqs && pci_routeirq) {
1155 struct pci_dev *dev = NULL;
1156 /*
1157 * PCI IRQ routing is set up by pci_enable_device(), but we
1158 * also do it here in case there are still broken drivers that
1159 * don't use pci_enable_device().
1160 */
1161 printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
1162 for_each_pci_dev(dev)
1163 pirq_enable_irq(dev);
1164 }
1165}
1166
1167static void pirq_penalize_isa_irq(int irq, int active)
1168{
1169 /*
1170 * If any ISAPnP device reports an IRQ in its list of possible
1171 * IRQ's, we try to avoid assigning it to PCI devices.
1172 */
1173 if (irq < 16) {
1174 if (active)
1175 pirq_penalty[irq] += 1000;
1176 else
1177 pirq_penalty[irq] += 100;
1178 }
1179}
1180
1181void pcibios_penalize_isa_irq(int irq, int active)
1182{
1183#ifdef CONFIG_ACPI
1184 if (!acpi_noirq)
1185 acpi_penalize_isa_irq(irq, active);
1186 else
1187#endif
1188 pirq_penalize_isa_irq(irq, active);
1189}
1190
1191static int pirq_enable_irq(struct pci_dev *dev)
1192{
1193 u8 pin;
1194
1195 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
1196 if (pin && !pcibios_lookup_irq(dev, 1)) {
1197 char *msg = "";
1198
1199 if (!io_apic_assign_pci_irqs && dev->irq)
1200 return 0;
1201
1202 if (io_apic_assign_pci_irqs) {
1203#ifdef CONFIG_X86_IO_APIC
1204 struct pci_dev *temp_dev;
1205 int irq;
1206 struct io_apic_irq_attr irq_attr;
1207
1208 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
1209 PCI_SLOT(dev->devfn),
1210 pin - 1, &irq_attr);
1211 /*
1212 * Busses behind bridges are typically not listed in the MP-table.
1213 * In this case we have to look up the IRQ based on the parent bus,
1214 * parent slot, and pin number. The SMP code detects such bridged
1215 * busses itself so we should get into this branch reliably.
1216 */
1217 temp_dev = dev;
1218 while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
1219 struct pci_dev *bridge = dev->bus->self;
1220
1221 pin = pci_swizzle_interrupt_pin(dev, pin);
1222 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
1223 PCI_SLOT(bridge->devfn),
1224 pin - 1, &irq_attr);
1225 if (irq >= 0)
1226 dev_warn(&dev->dev, "using bridge %s "
1227 "INT %c to get IRQ %d\n",
1228 pci_name(bridge), 'A' + pin - 1,
1229 irq);
1230 dev = bridge;
1231 }
1232 dev = temp_dev;
1233 if (irq >= 0) {
1234 io_apic_set_pci_routing(&dev->dev, irq,
1235 &irq_attr);
1236 dev->irq = irq;
1237 dev_info(&dev->dev, "PCI->APIC IRQ transform: "
1238 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
1239 return 0;
1240 } else
1241 msg = "; probably buggy MP table";
1242#endif
1243 } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
1244 msg = "";
1245 else
1246 msg = "; please try using pci=biosirq";
1247
1248 /*
1249 * With IDE legacy devices the IRQ lookup failure is not
1250 * a problem..
1251 */
1252 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
1253 !(dev->class & 0x5))
1254 return 0;
1255
1256 dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
1257 'A' + pin - 1, msg);
1258 }
1259 return 0;
1260}
1/*
2 * Low-Level PCI Support for PC -- Routing of Interrupts
3 *
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
6
7#include <linux/types.h>
8#include <linux/kernel.h>
9#include <linux/pci.h>
10#include <linux/init.h>
11#include <linux/interrupt.h>
12#include <linux/dmi.h>
13#include <linux/io.h>
14#include <linux/smp.h>
15#include <asm/io_apic.h>
16#include <linux/irq.h>
17#include <linux/acpi.h>
18#include <asm/pci_x86.h>
19
20#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
21#define PIRQ_VERSION 0x0100
22
23static int broken_hp_bios_irq9;
24static int acer_tm360_irqrouting;
25
26static struct irq_routing_table *pirq_table;
27
28static int pirq_enable_irq(struct pci_dev *dev);
29
30/*
31 * Never use: 0, 1, 2 (timer, keyboard, and cascade)
32 * Avoid using: 13, 14 and 15 (FP error and IDE).
33 * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse)
34 */
35unsigned int pcibios_irq_mask = 0xfff8;
36
37static int pirq_penalty[16] = {
38 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
39 0, 0, 0, 0, 1000, 100000, 100000, 100000
40};
41
42struct irq_router {
43 char *name;
44 u16 vendor, device;
45 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
46 int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
47 int new);
48};
49
50struct irq_router_handler {
51 u16 vendor;
52 int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
53};
54
55int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq;
56void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
57
58/*
59 * Check passed address for the PCI IRQ Routing Table signature
60 * and perform checksum verification.
61 */
62
63static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
64{
65 struct irq_routing_table *rt;
66 int i;
67 u8 sum;
68
69 rt = (struct irq_routing_table *) addr;
70 if (rt->signature != PIRQ_SIGNATURE ||
71 rt->version != PIRQ_VERSION ||
72 rt->size % 16 ||
73 rt->size < sizeof(struct irq_routing_table))
74 return NULL;
75 sum = 0;
76 for (i = 0; i < rt->size; i++)
77 sum += addr[i];
78 if (!sum) {
79 DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
80 rt);
81 return rt;
82 }
83 return NULL;
84}
85
86
87
88/*
89 * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
90 */
91
92static struct irq_routing_table * __init pirq_find_routing_table(void)
93{
94 u8 *addr;
95 struct irq_routing_table *rt;
96
97 if (pirq_table_addr) {
98 rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
99 if (rt)
100 return rt;
101 printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
102 }
103 for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
104 rt = pirq_check_routing_table(addr);
105 if (rt)
106 return rt;
107 }
108 return NULL;
109}
110
111/*
112 * If we have a IRQ routing table, use it to search for peer host
113 * bridges. It's a gross hack, but since there are no other known
114 * ways how to get a list of buses, we have to go this way.
115 */
116
117static void __init pirq_peer_trick(void)
118{
119 struct irq_routing_table *rt = pirq_table;
120 u8 busmap[256];
121 int i;
122 struct irq_info *e;
123
124 memset(busmap, 0, sizeof(busmap));
125 for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
126 e = &rt->slots[i];
127#ifdef DEBUG
128 {
129 int j;
130 DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
131 for (j = 0; j < 4; j++)
132 DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
133 DBG("\n");
134 }
135#endif
136 busmap[e->bus] = 1;
137 }
138 for (i = 1; i < 256; i++) {
139 if (!busmap[i] || pci_find_bus(0, i))
140 continue;
141 pcibios_scan_root(i);
142 }
143 pcibios_last_bus = -1;
144}
145
146/*
147 * Code for querying and setting of IRQ routes on various interrupt routers.
148 */
149
150void eisa_set_level_irq(unsigned int irq)
151{
152 unsigned char mask = 1 << (irq & 7);
153 unsigned int port = 0x4d0 + (irq >> 3);
154 unsigned char val;
155 static u16 eisa_irq_mask;
156
157 if (irq >= 16 || (1 << irq) & eisa_irq_mask)
158 return;
159
160 eisa_irq_mask |= (1 << irq);
161 printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
162 val = inb(port);
163 if (!(val & mask)) {
164 DBG(KERN_DEBUG " -> edge");
165 outb(val | mask, port);
166 }
167}
168
169/*
170 * Common IRQ routing practice: nibbles in config space,
171 * offset by some magic constant.
172 */
173static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr)
174{
175 u8 x;
176 unsigned reg = offset + (nr >> 1);
177
178 pci_read_config_byte(router, reg, &x);
179 return (nr & 1) ? (x >> 4) : (x & 0xf);
180}
181
182static void write_config_nybble(struct pci_dev *router, unsigned offset,
183 unsigned nr, unsigned int val)
184{
185 u8 x;
186 unsigned reg = offset + (nr >> 1);
187
188 pci_read_config_byte(router, reg, &x);
189 x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val);
190 pci_write_config_byte(router, reg, x);
191}
192
193/*
194 * ALI pirq entries are damn ugly, and completely undocumented.
195 * This has been figured out from pirq tables, and it's not a pretty
196 * picture.
197 */
198static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
199{
200 static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
201
202 WARN_ON_ONCE(pirq > 16);
203 return irqmap[read_config_nybble(router, 0x48, pirq-1)];
204}
205
206static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
207{
208 static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
209 unsigned int val = irqmap[irq];
210
211 WARN_ON_ONCE(pirq > 16);
212 if (val) {
213 write_config_nybble(router, 0x48, pirq-1, val);
214 return 1;
215 }
216 return 0;
217}
218
219/*
220 * The Intel PIIX4 pirq rules are fairly simple: "pirq" is
221 * just a pointer to the config space.
222 */
223static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
224{
225 u8 x;
226
227 pci_read_config_byte(router, pirq, &x);
228 return (x < 16) ? x : 0;
229}
230
231static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
232{
233 pci_write_config_byte(router, pirq, irq);
234 return 1;
235}
236
237/*
238 * The VIA pirq rules are nibble-based, like ALI,
239 * but without the ugly irq number munging.
240 * However, PIRQD is in the upper instead of lower 4 bits.
241 */
242static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
243{
244 return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq);
245}
246
247static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
248{
249 write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
250 return 1;
251}
252
253/*
254 * The VIA pirq rules are nibble-based, like ALI,
255 * but without the ugly irq number munging.
256 * However, for 82C586, nibble map is different .
257 */
258static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
259{
260 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
261
262 WARN_ON_ONCE(pirq > 5);
263 return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
264}
265
266static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
267{
268 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
269
270 WARN_ON_ONCE(pirq > 5);
271 write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
272 return 1;
273}
274
275/*
276 * ITE 8330G pirq rules are nibble-based
277 * FIXME: pirqmap may be { 1, 0, 3, 2 },
278 * 2+3 are both mapped to irq 9 on my system
279 */
280static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
281{
282 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
283
284 WARN_ON_ONCE(pirq > 4);
285 return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
286}
287
288static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
289{
290 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
291
292 WARN_ON_ONCE(pirq > 4);
293 write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
294 return 1;
295}
296
297/*
298 * OPTI: high four bits are nibble pointer..
299 * I wonder what the low bits do?
300 */
301static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
302{
303 return read_config_nybble(router, 0xb8, pirq >> 4);
304}
305
306static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
307{
308 write_config_nybble(router, 0xb8, pirq >> 4, irq);
309 return 1;
310}
311
312/*
313 * Cyrix: nibble offset 0x5C
314 * 0x5C bits 7:4 is INTB bits 3:0 is INTA
315 * 0x5D bits 7:4 is INTD bits 3:0 is INTC
316 */
317static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
318{
319 return read_config_nybble(router, 0x5C, (pirq-1)^1);
320}
321
322static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
323{
324 write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
325 return 1;
326}
327
328/*
329 * PIRQ routing for SiS 85C503 router used in several SiS chipsets.
330 * We have to deal with the following issues here:
331 * - vendors have different ideas about the meaning of link values
332 * - some onboard devices (integrated in the chipset) have special
333 * links and are thus routed differently (i.e. not via PCI INTA-INTD)
334 * - different revision of the router have a different layout for
335 * the routing registers, particularly for the onchip devices
336 *
337 * For all routing registers the common thing is we have one byte
338 * per routeable link which is defined as:
339 * bit 7 IRQ mapping enabled (0) or disabled (1)
340 * bits [6:4] reserved (sometimes used for onchip devices)
341 * bits [3:0] IRQ to map to
342 * allowed: 3-7, 9-12, 14-15
343 * reserved: 0, 1, 2, 8, 13
344 *
345 * The config-space registers located at 0x41/0x42/0x43/0x44 are
346 * always used to route the normal PCI INT A/B/C/D respectively.
347 * Apparently there are systems implementing PCI routing table using
348 * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
349 * We try our best to handle both link mappings.
350 *
351 * Currently (2003-05-21) it appears most SiS chipsets follow the
352 * definition of routing registers from the SiS-5595 southbridge.
353 * According to the SiS 5595 datasheets the revision id's of the
354 * router (ISA-bridge) should be 0x01 or 0xb0.
355 *
356 * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1.
357 * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets.
358 * They seem to work with the current routing code. However there is
359 * some concern because of the two USB-OHCI HCs (original SiS 5595
360 * had only one). YMMV.
361 *
362 * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1:
363 *
364 * 0x61: IDEIRQ:
365 * bits [6:5] must be written 01
366 * bit 4 channel-select primary (0), secondary (1)
367 *
368 * 0x62: USBIRQ:
369 * bit 6 OHCI function disabled (0), enabled (1)
370 *
371 * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
372 *
373 * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
374 *
375 * We support USBIRQ (in addition to INTA-INTD) and keep the
376 * IDE, ACPI and DAQ routing untouched as set by the BIOS.
377 *
378 * Currently the only reported exception is the new SiS 65x chipset
379 * which includes the SiS 69x southbridge. Here we have the 85C503
380 * router revision 0x04 and there are changes in the register layout
381 * mostly related to the different USB HCs with USB 2.0 support.
382 *
383 * Onchip routing for router rev-id 0x04 (try-and-error observation)
384 *
385 * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs
386 * bit 6-4 are probably unused, not like 5595
387 */
388
389#define PIRQ_SIS_IRQ_MASK 0x0f
390#define PIRQ_SIS_IRQ_DISABLE 0x80
391#define PIRQ_SIS_USB_ENABLE 0x40
392
393static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
394{
395 u8 x;
396 int reg;
397
398 reg = pirq;
399 if (reg >= 0x01 && reg <= 0x04)
400 reg += 0x40;
401 pci_read_config_byte(router, reg, &x);
402 return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
403}
404
405static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
406{
407 u8 x;
408 int reg;
409
410 reg = pirq;
411 if (reg >= 0x01 && reg <= 0x04)
412 reg += 0x40;
413 pci_read_config_byte(router, reg, &x);
414 x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE);
415 x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE;
416 pci_write_config_byte(router, reg, x);
417 return 1;
418}
419
420
421/*
422 * VLSI: nibble offset 0x74 - educated guess due to routing table and
423 * config space of VLSI 82C534 PCI-bridge/router (1004:0102)
424 * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard
425 * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6
426 * for the busbridge to the docking station.
427 */
428
429static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
430{
431 WARN_ON_ONCE(pirq >= 9);
432 if (pirq > 8) {
433 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
434 return 0;
435 }
436 return read_config_nybble(router, 0x74, pirq-1);
437}
438
439static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
440{
441 WARN_ON_ONCE(pirq >= 9);
442 if (pirq > 8) {
443 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
444 return 0;
445 }
446 write_config_nybble(router, 0x74, pirq-1, irq);
447 return 1;
448}
449
450/*
451 * ServerWorks: PCI interrupts mapped to system IRQ lines through Index
452 * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register
453 * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect
454 * register is a straight binary coding of desired PIC IRQ (low nibble).
455 *
456 * The 'link' value in the PIRQ table is already in the correct format
457 * for the Index register. There are some special index values:
458 * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1,
459 * and 0x03 for SMBus.
460 */
461static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
462{
463 outb(pirq, 0xc00);
464 return inb(0xc01) & 0xf;
465}
466
467static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
468 int pirq, int irq)
469{
470 outb(pirq, 0xc00);
471 outb(irq, 0xc01);
472 return 1;
473}
474
475/* Support for AMD756 PCI IRQ Routing
476 * Jhon H. Caicedo <jhcaiced@osso.org.co>
477 * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced)
478 * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced)
479 * The AMD756 pirq rules are nibble-based
480 * offset 0x56 0-3 PIRQA 4-7 PIRQB
481 * offset 0x57 0-3 PIRQC 4-7 PIRQD
482 */
483static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
484{
485 u8 irq;
486 irq = 0;
487 if (pirq <= 4)
488 irq = read_config_nybble(router, 0x56, pirq - 1);
489 dev_info(&dev->dev,
490 "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n",
491 dev->vendor, dev->device, pirq, irq);
492 return irq;
493}
494
495static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
496{
497 dev_info(&dev->dev,
498 "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n",
499 dev->vendor, dev->device, pirq, irq);
500 if (pirq <= 4)
501 write_config_nybble(router, 0x56, pirq - 1, irq);
502 return 1;
503}
504
505/*
506 * PicoPower PT86C523
507 */
508static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
509{
510 outb(0x10 + ((pirq - 1) >> 1), 0x24);
511 return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf);
512}
513
514static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
515 int irq)
516{
517 unsigned int x;
518 outb(0x10 + ((pirq - 1) >> 1), 0x24);
519 x = inb(0x26);
520 x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq));
521 outb(x, 0x26);
522 return 1;
523}
524
525#ifdef CONFIG_PCI_BIOS
526
527static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
528{
529 struct pci_dev *bridge;
530 int pin = pci_get_interrupt_pin(dev, &bridge);
531 return pcibios_set_irq_routing(bridge, pin - 1, irq);
532}
533
534#endif
535
536static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
537{
538 static struct pci_device_id __initdata pirq_440gx[] = {
539 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) },
540 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) },
541 { },
542 };
543
544 /* 440GX has a proprietary PIRQ router -- don't use it */
545 if (pci_dev_present(pirq_440gx))
546 return 0;
547
548 switch (device) {
549 case PCI_DEVICE_ID_INTEL_82371FB_0:
550 case PCI_DEVICE_ID_INTEL_82371SB_0:
551 case PCI_DEVICE_ID_INTEL_82371AB_0:
552 case PCI_DEVICE_ID_INTEL_82371MX:
553 case PCI_DEVICE_ID_INTEL_82443MX_0:
554 case PCI_DEVICE_ID_INTEL_82801AA_0:
555 case PCI_DEVICE_ID_INTEL_82801AB_0:
556 case PCI_DEVICE_ID_INTEL_82801BA_0:
557 case PCI_DEVICE_ID_INTEL_82801BA_10:
558 case PCI_DEVICE_ID_INTEL_82801CA_0:
559 case PCI_DEVICE_ID_INTEL_82801CA_12:
560 case PCI_DEVICE_ID_INTEL_82801DB_0:
561 case PCI_DEVICE_ID_INTEL_82801E_0:
562 case PCI_DEVICE_ID_INTEL_82801EB_0:
563 case PCI_DEVICE_ID_INTEL_ESB_1:
564 case PCI_DEVICE_ID_INTEL_ICH6_0:
565 case PCI_DEVICE_ID_INTEL_ICH6_1:
566 case PCI_DEVICE_ID_INTEL_ICH7_0:
567 case PCI_DEVICE_ID_INTEL_ICH7_1:
568 case PCI_DEVICE_ID_INTEL_ICH7_30:
569 case PCI_DEVICE_ID_INTEL_ICH7_31:
570 case PCI_DEVICE_ID_INTEL_TGP_LPC:
571 case PCI_DEVICE_ID_INTEL_ESB2_0:
572 case PCI_DEVICE_ID_INTEL_ICH8_0:
573 case PCI_DEVICE_ID_INTEL_ICH8_1:
574 case PCI_DEVICE_ID_INTEL_ICH8_2:
575 case PCI_DEVICE_ID_INTEL_ICH8_3:
576 case PCI_DEVICE_ID_INTEL_ICH8_4:
577 case PCI_DEVICE_ID_INTEL_ICH9_0:
578 case PCI_DEVICE_ID_INTEL_ICH9_1:
579 case PCI_DEVICE_ID_INTEL_ICH9_2:
580 case PCI_DEVICE_ID_INTEL_ICH9_3:
581 case PCI_DEVICE_ID_INTEL_ICH9_4:
582 case PCI_DEVICE_ID_INTEL_ICH9_5:
583 case PCI_DEVICE_ID_INTEL_EP80579_0:
584 case PCI_DEVICE_ID_INTEL_ICH10_0:
585 case PCI_DEVICE_ID_INTEL_ICH10_1:
586 case PCI_DEVICE_ID_INTEL_ICH10_2:
587 case PCI_DEVICE_ID_INTEL_ICH10_3:
588 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0:
589 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1:
590 r->name = "PIIX/ICH";
591 r->get = pirq_piix_get;
592 r->set = pirq_piix_set;
593 return 1;
594 }
595
596 if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN &&
597 device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX)
598 || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
599 device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)
600 || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN &&
601 device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)
602 || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
603 device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) {
604 r->name = "PIIX/ICH";
605 r->get = pirq_piix_get;
606 r->set = pirq_piix_set;
607 return 1;
608 }
609
610 return 0;
611}
612
613static __init int via_router_probe(struct irq_router *r,
614 struct pci_dev *router, u16 device)
615{
616 /* FIXME: We should move some of the quirk fixup stuff here */
617
618 /*
619 * workarounds for some buggy BIOSes
620 */
621 if (device == PCI_DEVICE_ID_VIA_82C586_0) {
622 switch (router->device) {
623 case PCI_DEVICE_ID_VIA_82C686:
624 /*
625 * Asus k7m bios wrongly reports 82C686A
626 * as 586-compatible
627 */
628 device = PCI_DEVICE_ID_VIA_82C686;
629 break;
630 case PCI_DEVICE_ID_VIA_8235:
631 /**
632 * Asus a7v-x bios wrongly reports 8235
633 * as 586-compatible
634 */
635 device = PCI_DEVICE_ID_VIA_8235;
636 break;
637 case PCI_DEVICE_ID_VIA_8237:
638 /**
639 * Asus a7v600 bios wrongly reports 8237
640 * as 586-compatible
641 */
642 device = PCI_DEVICE_ID_VIA_8237;
643 break;
644 }
645 }
646
647 switch (device) {
648 case PCI_DEVICE_ID_VIA_82C586_0:
649 r->name = "VIA";
650 r->get = pirq_via586_get;
651 r->set = pirq_via586_set;
652 return 1;
653 case PCI_DEVICE_ID_VIA_82C596:
654 case PCI_DEVICE_ID_VIA_82C686:
655 case PCI_DEVICE_ID_VIA_8231:
656 case PCI_DEVICE_ID_VIA_8233A:
657 case PCI_DEVICE_ID_VIA_8235:
658 case PCI_DEVICE_ID_VIA_8237:
659 /* FIXME: add new ones for 8233/5 */
660 r->name = "VIA";
661 r->get = pirq_via_get;
662 r->set = pirq_via_set;
663 return 1;
664 }
665 return 0;
666}
667
668static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
669{
670 switch (device) {
671 case PCI_DEVICE_ID_VLSI_82C534:
672 r->name = "VLSI 82C534";
673 r->get = pirq_vlsi_get;
674 r->set = pirq_vlsi_set;
675 return 1;
676 }
677 return 0;
678}
679
680
681static __init int serverworks_router_probe(struct irq_router *r,
682 struct pci_dev *router, u16 device)
683{
684 switch (device) {
685 case PCI_DEVICE_ID_SERVERWORKS_OSB4:
686 case PCI_DEVICE_ID_SERVERWORKS_CSB5:
687 r->name = "ServerWorks";
688 r->get = pirq_serverworks_get;
689 r->set = pirq_serverworks_set;
690 return 1;
691 }
692 return 0;
693}
694
695static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
696{
697 if (device != PCI_DEVICE_ID_SI_503)
698 return 0;
699
700 r->name = "SIS";
701 r->get = pirq_sis_get;
702 r->set = pirq_sis_set;
703 return 1;
704}
705
706static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
707{
708 switch (device) {
709 case PCI_DEVICE_ID_CYRIX_5520:
710 r->name = "NatSemi";
711 r->get = pirq_cyrix_get;
712 r->set = pirq_cyrix_set;
713 return 1;
714 }
715 return 0;
716}
717
718static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
719{
720 switch (device) {
721 case PCI_DEVICE_ID_OPTI_82C700:
722 r->name = "OPTI";
723 r->get = pirq_opti_get;
724 r->set = pirq_opti_set;
725 return 1;
726 }
727 return 0;
728}
729
730static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
731{
732 switch (device) {
733 case PCI_DEVICE_ID_ITE_IT8330G_0:
734 r->name = "ITE";
735 r->get = pirq_ite_get;
736 r->set = pirq_ite_set;
737 return 1;
738 }
739 return 0;
740}
741
742static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
743{
744 switch (device) {
745 case PCI_DEVICE_ID_AL_M1533:
746 case PCI_DEVICE_ID_AL_M1563:
747 r->name = "ALI";
748 r->get = pirq_ali_get;
749 r->set = pirq_ali_set;
750 return 1;
751 }
752 return 0;
753}
754
755static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
756{
757 switch (device) {
758 case PCI_DEVICE_ID_AMD_VIPER_740B:
759 r->name = "AMD756";
760 break;
761 case PCI_DEVICE_ID_AMD_VIPER_7413:
762 r->name = "AMD766";
763 break;
764 case PCI_DEVICE_ID_AMD_VIPER_7443:
765 r->name = "AMD768";
766 break;
767 default:
768 return 0;
769 }
770 r->get = pirq_amd756_get;
771 r->set = pirq_amd756_set;
772 return 1;
773}
774
775static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
776{
777 switch (device) {
778 case PCI_DEVICE_ID_PICOPOWER_PT86C523:
779 r->name = "PicoPower PT86C523";
780 r->get = pirq_pico_get;
781 r->set = pirq_pico_set;
782 return 1;
783
784 case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP:
785 r->name = "PicoPower PT86C523 rev. BB+";
786 r->get = pirq_pico_get;
787 r->set = pirq_pico_set;
788 return 1;
789 }
790 return 0;
791}
792
793static __initdata struct irq_router_handler pirq_routers[] = {
794 { PCI_VENDOR_ID_INTEL, intel_router_probe },
795 { PCI_VENDOR_ID_AL, ali_router_probe },
796 { PCI_VENDOR_ID_ITE, ite_router_probe },
797 { PCI_VENDOR_ID_VIA, via_router_probe },
798 { PCI_VENDOR_ID_OPTI, opti_router_probe },
799 { PCI_VENDOR_ID_SI, sis_router_probe },
800 { PCI_VENDOR_ID_CYRIX, cyrix_router_probe },
801 { PCI_VENDOR_ID_VLSI, vlsi_router_probe },
802 { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
803 { PCI_VENDOR_ID_AMD, amd_router_probe },
804 { PCI_VENDOR_ID_PICOPOWER, pico_router_probe },
805 /* Someone with docs needs to add the ATI Radeon IGP */
806 { 0, NULL }
807};
808static struct irq_router pirq_router;
809static struct pci_dev *pirq_router_dev;
810
811
812/*
813 * FIXME: should we have an option to say "generic for
814 * chipset" ?
815 */
816
817static void __init pirq_find_router(struct irq_router *r)
818{
819 struct irq_routing_table *rt = pirq_table;
820 struct irq_router_handler *h;
821
822#ifdef CONFIG_PCI_BIOS
823 if (!rt->signature) {
824 printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
825 r->set = pirq_bios_set;
826 r->name = "BIOS";
827 return;
828 }
829#endif
830
831 /* Default unless a driver reloads it */
832 r->name = "default";
833 r->get = NULL;
834 r->set = NULL;
835
836 DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n",
837 rt->rtr_vendor, rt->rtr_device);
838
839 pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn);
840 if (!pirq_router_dev) {
841 DBG(KERN_DEBUG "PCI: Interrupt router not found at "
842 "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
843 return;
844 }
845
846 for (h = pirq_routers; h->vendor; h++) {
847 /* First look for a router match */
848 if (rt->rtr_vendor == h->vendor &&
849 h->probe(r, pirq_router_dev, rt->rtr_device))
850 break;
851 /* Fall back to a device match */
852 if (pirq_router_dev->vendor == h->vendor &&
853 h->probe(r, pirq_router_dev, pirq_router_dev->device))
854 break;
855 }
856 dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n",
857 pirq_router.name,
858 pirq_router_dev->vendor, pirq_router_dev->device);
859
860 /* The device remains referenced for the kernel lifetime */
861}
862
863static struct irq_info *pirq_get_info(struct pci_dev *dev)
864{
865 struct irq_routing_table *rt = pirq_table;
866 int entries = (rt->size - sizeof(struct irq_routing_table)) /
867 sizeof(struct irq_info);
868 struct irq_info *info;
869
870 for (info = rt->slots; entries--; info++)
871 if (info->bus == dev->bus->number &&
872 PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
873 return info;
874 return NULL;
875}
876
877static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
878{
879 u8 pin;
880 struct irq_info *info;
881 int i, pirq, newirq;
882 int irq = 0;
883 u32 mask;
884 struct irq_router *r = &pirq_router;
885 struct pci_dev *dev2 = NULL;
886 char *msg = NULL;
887
888 /* Find IRQ pin */
889 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
890 if (!pin) {
891 dev_dbg(&dev->dev, "no interrupt pin\n");
892 return 0;
893 }
894
895 if (io_apic_assign_pci_irqs)
896 return 0;
897
898 /* Find IRQ routing entry */
899
900 if (!pirq_table)
901 return 0;
902
903 info = pirq_get_info(dev);
904 if (!info) {
905 dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
906 'A' + pin - 1);
907 return 0;
908 }
909 pirq = info->irq[pin - 1].link;
910 mask = info->irq[pin - 1].bitmap;
911 if (!pirq) {
912 dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin - 1);
913 return 0;
914 }
915 dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
916 'A' + pin - 1, pirq, mask, pirq_table->exclusive_irqs);
917 mask &= pcibios_irq_mask;
918
919 /* Work around broken HP Pavilion Notebooks which assign USB to
920 IRQ 9 even though it is actually wired to IRQ 11 */
921
922 if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) {
923 dev->irq = 11;
924 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
925 r->set(pirq_router_dev, dev, pirq, 11);
926 }
927
928 /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
929 if (acer_tm360_irqrouting && dev->irq == 11 &&
930 dev->vendor == PCI_VENDOR_ID_O2) {
931 pirq = 0x68;
932 mask = 0x400;
933 dev->irq = r->get(pirq_router_dev, dev, pirq);
934 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
935 }
936
937 /*
938 * Find the best IRQ to assign: use the one
939 * reported by the device if possible.
940 */
941 newirq = dev->irq;
942 if (newirq && !((1 << newirq) & mask)) {
943 if (pci_probe & PCI_USE_PIRQ_MASK)
944 newirq = 0;
945 else
946 dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
947 "%#x; try pci=usepirqmask\n", newirq, mask);
948 }
949 if (!newirq && assign) {
950 for (i = 0; i < 16; i++) {
951 if (!(mask & (1 << i)))
952 continue;
953 if (pirq_penalty[i] < pirq_penalty[newirq] &&
954 can_request_irq(i, IRQF_SHARED))
955 newirq = i;
956 }
957 }
958 dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin - 1, newirq);
959
960 /* Check if it is hardcoded */
961 if ((pirq & 0xf0) == 0xf0) {
962 irq = pirq & 0xf;
963 msg = "hardcoded";
964 } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
965 ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
966 msg = "found";
967 eisa_set_level_irq(irq);
968 } else if (newirq && r->set &&
969 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
970 if (r->set(pirq_router_dev, dev, pirq, newirq)) {
971 eisa_set_level_irq(newirq);
972 msg = "assigned";
973 irq = newirq;
974 }
975 }
976
977 if (!irq) {
978 if (newirq && mask == (1 << newirq)) {
979 msg = "guessed";
980 irq = newirq;
981 } else {
982 dev_dbg(&dev->dev, "can't route interrupt\n");
983 return 0;
984 }
985 }
986 dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq);
987
988 /* Update IRQ for all devices with the same pirq value */
989 for_each_pci_dev(dev2) {
990 pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin);
991 if (!pin)
992 continue;
993
994 info = pirq_get_info(dev2);
995 if (!info)
996 continue;
997 if (info->irq[pin - 1].link == pirq) {
998 /*
999 * We refuse to override the dev->irq
1000 * information. Give a warning!
1001 */
1002 if (dev2->irq && dev2->irq != irq && \
1003 (!(pci_probe & PCI_USE_PIRQ_MASK) || \
1004 ((1 << dev2->irq) & mask))) {
1005#ifndef CONFIG_PCI_MSI
1006 dev_info(&dev2->dev, "IRQ routing conflict: "
1007 "have IRQ %d, want IRQ %d\n",
1008 dev2->irq, irq);
1009#endif
1010 continue;
1011 }
1012 dev2->irq = irq;
1013 pirq_penalty[irq]++;
1014 if (dev != dev2)
1015 dev_info(&dev->dev, "sharing IRQ %d with %s\n",
1016 irq, pci_name(dev2));
1017 }
1018 }
1019 return 1;
1020}
1021
1022void __init pcibios_fixup_irqs(void)
1023{
1024 struct pci_dev *dev = NULL;
1025 u8 pin;
1026
1027 DBG(KERN_DEBUG "PCI: IRQ fixup\n");
1028 for_each_pci_dev(dev) {
1029 /*
1030 * If the BIOS has set an out of range IRQ number, just
1031 * ignore it. Also keep track of which IRQ's are
1032 * already in use.
1033 */
1034 if (dev->irq >= 16) {
1035 dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
1036 dev->irq = 0;
1037 }
1038 /*
1039 * If the IRQ is already assigned to a PCI device,
1040 * ignore its ISA use penalty
1041 */
1042 if (pirq_penalty[dev->irq] >= 100 &&
1043 pirq_penalty[dev->irq] < 100000)
1044 pirq_penalty[dev->irq] = 0;
1045 pirq_penalty[dev->irq]++;
1046 }
1047
1048 if (io_apic_assign_pci_irqs)
1049 return;
1050
1051 dev = NULL;
1052 for_each_pci_dev(dev) {
1053 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
1054 if (!pin)
1055 continue;
1056
1057 /*
1058 * Still no IRQ? Try to lookup one...
1059 */
1060 if (!dev->irq)
1061 pcibios_lookup_irq(dev, 0);
1062 }
1063}
1064
1065/*
1066 * Work around broken HP Pavilion Notebooks which assign USB to
1067 * IRQ 9 even though it is actually wired to IRQ 11
1068 */
1069static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
1070{
1071 if (!broken_hp_bios_irq9) {
1072 broken_hp_bios_irq9 = 1;
1073 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
1074 d->ident);
1075 }
1076 return 0;
1077}
1078
1079/*
1080 * Work around broken Acer TravelMate 360 Notebooks which assign
1081 * Cardbus to IRQ 11 even though it is actually wired to IRQ 10
1082 */
1083static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
1084{
1085 if (!acer_tm360_irqrouting) {
1086 acer_tm360_irqrouting = 1;
1087 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
1088 d->ident);
1089 }
1090 return 0;
1091}
1092
1093static struct dmi_system_id __initdata pciirq_dmi_table[] = {
1094 {
1095 .callback = fix_broken_hp_bios_irq9,
1096 .ident = "HP Pavilion N5400 Series Laptop",
1097 .matches = {
1098 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1099 DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
1100 DMI_MATCH(DMI_PRODUCT_VERSION,
1101 "HP Pavilion Notebook Model GE"),
1102 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
1103 },
1104 },
1105 {
1106 .callback = fix_acer_tm360_irqrouting,
1107 .ident = "Acer TravelMate 36x Laptop",
1108 .matches = {
1109 DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
1110 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
1111 },
1112 },
1113 { }
1114};
1115
1116void __init pcibios_irq_init(void)
1117{
1118 DBG(KERN_DEBUG "PCI: IRQ init\n");
1119
1120 if (raw_pci_ops == NULL)
1121 return;
1122
1123 dmi_check_system(pciirq_dmi_table);
1124
1125 pirq_table = pirq_find_routing_table();
1126
1127#ifdef CONFIG_PCI_BIOS
1128 if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN))
1129 pirq_table = pcibios_get_irq_routing_table();
1130#endif
1131 if (pirq_table) {
1132 pirq_peer_trick();
1133 pirq_find_router(&pirq_router);
1134 if (pirq_table->exclusive_irqs) {
1135 int i;
1136 for (i = 0; i < 16; i++)
1137 if (!(pirq_table->exclusive_irqs & (1 << i)))
1138 pirq_penalty[i] += 100;
1139 }
1140 /*
1141 * If we're using the I/O APIC, avoid using the PCI IRQ
1142 * routing table
1143 */
1144 if (io_apic_assign_pci_irqs)
1145 pirq_table = NULL;
1146 }
1147
1148 x86_init.pci.fixup_irqs();
1149
1150 if (io_apic_assign_pci_irqs && pci_routeirq) {
1151 struct pci_dev *dev = NULL;
1152 /*
1153 * PCI IRQ routing is set up by pci_enable_device(), but we
1154 * also do it here in case there are still broken drivers that
1155 * don't use pci_enable_device().
1156 */
1157 printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
1158 for_each_pci_dev(dev)
1159 pirq_enable_irq(dev);
1160 }
1161}
1162
1163static void pirq_penalize_isa_irq(int irq, int active)
1164{
1165 /*
1166 * If any ISAPnP device reports an IRQ in its list of possible
1167 * IRQ's, we try to avoid assigning it to PCI devices.
1168 */
1169 if (irq < 16) {
1170 if (active)
1171 pirq_penalty[irq] += 1000;
1172 else
1173 pirq_penalty[irq] += 100;
1174 }
1175}
1176
1177void pcibios_penalize_isa_irq(int irq, int active)
1178{
1179#ifdef CONFIG_ACPI
1180 if (!acpi_noirq)
1181 acpi_penalize_isa_irq(irq, active);
1182 else
1183#endif
1184 pirq_penalize_isa_irq(irq, active);
1185}
1186
1187static int pirq_enable_irq(struct pci_dev *dev)
1188{
1189 u8 pin;
1190
1191 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
1192 if (pin && !pcibios_lookup_irq(dev, 1)) {
1193 char *msg = "";
1194
1195 if (!io_apic_assign_pci_irqs && dev->irq)
1196 return 0;
1197
1198 if (io_apic_assign_pci_irqs) {
1199#ifdef CONFIG_X86_IO_APIC
1200 struct pci_dev *temp_dev;
1201 int irq;
1202 struct io_apic_irq_attr irq_attr;
1203
1204 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
1205 PCI_SLOT(dev->devfn),
1206 pin - 1, &irq_attr);
1207 /*
1208 * Busses behind bridges are typically not listed in the MP-table.
1209 * In this case we have to look up the IRQ based on the parent bus,
1210 * parent slot, and pin number. The SMP code detects such bridged
1211 * busses itself so we should get into this branch reliably.
1212 */
1213 temp_dev = dev;
1214 while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
1215 struct pci_dev *bridge = dev->bus->self;
1216
1217 pin = pci_swizzle_interrupt_pin(dev, pin);
1218 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
1219 PCI_SLOT(bridge->devfn),
1220 pin - 1, &irq_attr);
1221 if (irq >= 0)
1222 dev_warn(&dev->dev, "using bridge %s "
1223 "INT %c to get IRQ %d\n",
1224 pci_name(bridge), 'A' + pin - 1,
1225 irq);
1226 dev = bridge;
1227 }
1228 dev = temp_dev;
1229 if (irq >= 0) {
1230 io_apic_set_pci_routing(&dev->dev, irq,
1231 &irq_attr);
1232 dev->irq = irq;
1233 dev_info(&dev->dev, "PCI->APIC IRQ transform: "
1234 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
1235 return 0;
1236 } else
1237 msg = "; probably buggy MP table";
1238#endif
1239 } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
1240 msg = "";
1241 else
1242 msg = "; please try using pci=biosirq";
1243
1244 /*
1245 * With IDE legacy devices the IRQ lookup failure is not
1246 * a problem..
1247 */
1248 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
1249 !(dev->class & 0x5))
1250 return 0;
1251
1252 dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
1253 'A' + pin - 1, msg);
1254 }
1255 return 0;
1256}