Loading...
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7 depends on USB
8
9config USB_STORAGE
10 tristate "USB Mass Storage support"
11 depends on USB && SCSI
12 ---help---
13 Say Y here if you want to connect USB mass storage devices to your
14 computer's USB port. This is the driver you need for USB
15 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16 USB flash devices, and memory sticks, along with
17 similar devices. This driver may also be used for some cameras
18 and card readers.
19
20 This option depends on 'SCSI' support being enabled, but you
21 probably also need 'SCSI device support: SCSI disk support'
22 (BLK_DEV_SD) for most USB storage devices.
23
24 To compile this driver as a module, choose M here: the
25 module will be called usb-storage.
26
27config USB_STORAGE_DEBUG
28 bool "USB Mass Storage verbose debug"
29 depends on USB_STORAGE
30 help
31 Say Y here in order to have the USB Mass Storage code generate
32 verbose debugging messages.
33
34config USB_STORAGE_REALTEK
35 tristate "Realtek Card Reader support"
36 depends on USB_STORAGE
37 help
38 Say Y here to include additional code to support the power-saving function
39 for Realtek RTS51xx USB card readers.
40
41 If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44 bool "Realtek Card Reader autosuspend support"
45 depends on USB_STORAGE_REALTEK && CONFIG_PM_RUNTIME
46 default y
47
48config USB_STORAGE_DATAFAB
49 tristate "Datafab Compact Flash Reader support"
50 depends on USB_STORAGE
51 help
52 Support for certain Datafab CompactFlash readers.
53 Datafab has a web page at <http://www.datafab.com/>.
54
55 If this driver is compiled as a module, it will be named ums-datafab.
56
57config USB_STORAGE_FREECOM
58 tristate "Freecom USB/ATAPI Bridge support"
59 depends on USB_STORAGE
60 help
61 Support for the Freecom USB to IDE/ATAPI adaptor.
62 Freecom has a web page at <http://www.freecom.de/>.
63
64 If this driver is compiled as a module, it will be named ums-freecom.
65
66config USB_STORAGE_ISD200
67 tristate "ISD-200 USB/ATA Bridge support"
68 depends on USB_STORAGE
69 ---help---
70 Say Y here if you want to use USB Mass Store devices based
71 on the In-Systems Design ISD-200 USB/ATA bridge.
72
73 Some of the products that use this chip are:
74
75 - Archos Jukebox 6000
76 - ISD SmartCable for Storage
77 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
78 - Sony CRX10U CD-R/RW drive
79 - CyQ've CQ8060A CDRW drive
80 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
81
82 If this driver is compiled as a module, it will be named ums-isd200.
83
84config USB_STORAGE_USBAT
85 tristate "USBAT/USBAT02-based storage support"
86 depends on USB_STORAGE
87 help
88 Say Y here to include additional code to support storage devices
89 based on the SCM/Shuttle USBAT/USBAT02 processors.
90
91 Devices reported to work with this driver include:
92 - CompactFlash reader included with Kodak DC3800 camera
93 - Dane-Elec Zmate CompactFlash reader
94 - Delkin Efilm reader2
95 - HP 8200e/8210e/8230e CD-Writer Plus drives
96 - I-JAM JS-50U
97 - Jessops CompactFlash JESDCFRU BLACK
98 - Kingston Technology PCREAD-USB/CF
99 - Maxell UA4 CompactFlash reader
100 - Memorex UCF-100
101 - Microtech ZiO! ICS-45 CF2
102 - RCA LYRA MP3 portable
103 - Sandisk ImageMate SDDR-05b
104
105 If this driver is compiled as a module, it will be named ums-usbat.
106
107config USB_STORAGE_SDDR09
108 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
109 depends on USB_STORAGE
110 help
111 Say Y here to include additional code to support the Sandisk SDDR-09
112 SmartMedia reader in the USB Mass Storage driver.
113 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
114
115 If this driver is compiled as a module, it will be named ums-sddr09.
116
117config USB_STORAGE_SDDR55
118 tristate "SanDisk SDDR-55 SmartMedia support"
119 depends on USB_STORAGE
120 help
121 Say Y here to include additional code to support the Sandisk SDDR-55
122 SmartMedia reader in the USB Mass Storage driver.
123
124 If this driver is compiled as a module, it will be named ums-sddr55.
125
126config USB_STORAGE_JUMPSHOT
127 tristate "Lexar Jumpshot Compact Flash Reader"
128 depends on USB_STORAGE
129 help
130 Say Y here to include additional code to support the Lexar Jumpshot
131 USB CompactFlash reader.
132
133 If this driver is compiled as a module, it will be named ums-jumpshot.
134
135config USB_STORAGE_ALAUDA
136 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
137 depends on USB_STORAGE
138 help
139 Say Y here to include additional code to support the Olympus MAUSB-10
140 and Fujifilm DPC-R1 USB Card reader/writer devices.
141
142 These devices are based on the Alauda chip and support both
143 XD and SmartMedia cards.
144
145 If this driver is compiled as a module, it will be named ums-alauda.
146
147config USB_STORAGE_ONETOUCH
148 tristate "Support OneTouch Button on Maxtor Hard Drives"
149 depends on USB_STORAGE
150 depends on INPUT=y || INPUT=USB_STORAGE
151 help
152 Say Y here to include additional code to support the Maxtor OneTouch
153 USB hard drive's onetouch button.
154
155 This code registers the button on the front of Maxtor OneTouch USB
156 hard drive's as an input device. An action can be associated with
157 this input in any keybinding software. (e.g. gnome's keyboard short-
158 cuts)
159
160 If this driver is compiled as a module, it will be named ums-onetouch.
161
162config USB_STORAGE_KARMA
163 tristate "Support for Rio Karma music player"
164 depends on USB_STORAGE
165 help
166 Say Y here to include additional code to support the Rio Karma
167 USB interface.
168
169 This code places the Rio Karma into mass storage mode, enabling
170 it to be mounted as an ordinary filesystem. Performing an eject
171 on the resulting scsi device node returns the Karma to normal
172 operation.
173
174 If this driver is compiled as a module, it will be named ums-karma.
175
176config USB_STORAGE_CYPRESS_ATACB
177 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
178 depends on USB_STORAGE
179 ---help---
180 Say Y here if you want to use SAT (ata pass through) on devices based
181 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
182 to use tools to tune and monitor your drive (like hdparm or smartctl).
183
184 If you say no here your device will still work with the standard usb
185 mass storage class.
186
187 If this driver is compiled as a module, it will be named ums-cypress.
188
189config USB_STORAGE_ENE_UB6250
190 tristate "USB ENE card reader support"
191 depends on USB && SCSI
192 depends on USB_STORAGE
193 ---help---
194 Say Y here if you wish to control a ENE SD/MS Card reader.
195 To use SM card, please build driver/staging/keucr/keucr.ko
196
197 This option depends on 'SCSI' support being enabled, but you
198 probably also need 'SCSI device support: SCSI disk support'
199 (BLK_DEV_SD) for most USB storage devices.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ums-eneub6250.
203
204config USB_UAS
205 tristate "USB Attached SCSI"
206 depends on USB && SCSI
207 help
208 The USB Attached SCSI protocol is supported by some USB
209 storage devices. It permits higher performance by supporting
210 multiple outstanding commands.
211
212 If you don't know whether you have a UAS device, it is safe to
213 say 'Y' or 'M' here and the kernel will use the right driver.
214
215 If you compile this driver as a module, it will be named uas.
216
217config USB_LIBUSUAL
218 bool "The shared table of common (or usual) storage devices"
219 depends on USB
220 help
221 This module contains a table of common (or usual) devices
222 for usb-storage and ub drivers, and allows to switch binding
223 of these devices without rebuilding modules.
224
225 Typical syntax of /etc/modprobe.conf is:
226
227 options libusual bias="ub"
228
229 If unsure, say N.
1#
2# USB Storage driver configuration
3#
4
5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6comment "also be needed; see USB_STORAGE Help for more info"
7
8config USB_STORAGE
9 tristate "USB Mass Storage support"
10 depends on SCSI
11 ---help---
12 Say Y here if you want to connect USB mass storage devices to your
13 computer's USB port. This is the driver you need for USB
14 floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
15 USB flash devices, and memory sticks, along with
16 similar devices. This driver may also be used for some cameras
17 and card readers.
18
19 This option depends on 'SCSI' support being enabled, but you
20 probably also need 'SCSI device support: SCSI disk support'
21 (BLK_DEV_SD) for most USB storage devices. Some devices also
22 will require 'Probe all LUNs on each SCSI device'
23 (SCSI_MULTI_LUN).
24
25 To compile this driver as a module, choose M here: the
26 module will be called usb-storage.
27
28config USB_STORAGE_DEBUG
29 bool "USB Mass Storage verbose debug"
30 depends on USB_STORAGE
31 help
32 Say Y here in order to have the USB Mass Storage code generate
33 verbose debugging messages.
34
35config USB_STORAGE_REALTEK
36 tristate "Realtek Card Reader support"
37 depends on USB_STORAGE
38 help
39 Say Y here to include additional code to support the power-saving function
40 for Realtek RTS51xx USB card readers.
41
42 If this driver is compiled as a module, it will be named ums-realtek.
43
44config REALTEK_AUTOPM
45 bool "Realtek Card Reader autosuspend support"
46 depends on USB_STORAGE_REALTEK && PM_RUNTIME
47 default y
48
49config USB_STORAGE_DATAFAB
50 tristate "Datafab Compact Flash Reader support"
51 depends on USB_STORAGE
52 help
53 Support for certain Datafab CompactFlash readers.
54 Datafab has a web page at <http://www.datafab.com/>.
55
56 If this driver is compiled as a module, it will be named ums-datafab.
57
58config USB_STORAGE_FREECOM
59 tristate "Freecom USB/ATAPI Bridge support"
60 depends on USB_STORAGE
61 help
62 Support for the Freecom USB to IDE/ATAPI adaptor.
63 Freecom has a web page at <http://www.freecom.de/>.
64
65 If this driver is compiled as a module, it will be named ums-freecom.
66
67config USB_STORAGE_ISD200
68 tristate "ISD-200 USB/ATA Bridge support"
69 depends on USB_STORAGE
70 ---help---
71 Say Y here if you want to use USB Mass Store devices based
72 on the In-Systems Design ISD-200 USB/ATA bridge.
73
74 Some of the products that use this chip are:
75
76 - Archos Jukebox 6000
77 - ISD SmartCable for Storage
78 - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
79 - Sony CRX10U CD-R/RW drive
80 - CyQ've CQ8060A CDRW drive
81 - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
82
83 If this driver is compiled as a module, it will be named ums-isd200.
84
85config USB_STORAGE_USBAT
86 tristate "USBAT/USBAT02-based storage support"
87 depends on USB_STORAGE
88 help
89 Say Y here to include additional code to support storage devices
90 based on the SCM/Shuttle USBAT/USBAT02 processors.
91
92 Devices reported to work with this driver include:
93 - CompactFlash reader included with Kodak DC3800 camera
94 - Dane-Elec Zmate CompactFlash reader
95 - Delkin Efilm reader2
96 - HP 8200e/8210e/8230e CD-Writer Plus drives
97 - I-JAM JS-50U
98 - Jessops CompactFlash JESDCFRU BLACK
99 - Kingston Technology PCREAD-USB/CF
100 - Maxell UA4 CompactFlash reader
101 - Memorex UCF-100
102 - Microtech ZiO! ICS-45 CF2
103 - RCA LYRA MP3 portable
104 - Sandisk ImageMate SDDR-05b
105
106 If this driver is compiled as a module, it will be named ums-usbat.
107
108config USB_STORAGE_SDDR09
109 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
110 depends on USB_STORAGE
111 help
112 Say Y here to include additional code to support the Sandisk SDDR-09
113 SmartMedia reader in the USB Mass Storage driver.
114 Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
115
116 If this driver is compiled as a module, it will be named ums-sddr09.
117
118config USB_STORAGE_SDDR55
119 tristate "SanDisk SDDR-55 SmartMedia support"
120 depends on USB_STORAGE
121 help
122 Say Y here to include additional code to support the Sandisk SDDR-55
123 SmartMedia reader in the USB Mass Storage driver.
124
125 If this driver is compiled as a module, it will be named ums-sddr55.
126
127config USB_STORAGE_JUMPSHOT
128 tristate "Lexar Jumpshot Compact Flash Reader"
129 depends on USB_STORAGE
130 help
131 Say Y here to include additional code to support the Lexar Jumpshot
132 USB CompactFlash reader.
133
134 If this driver is compiled as a module, it will be named ums-jumpshot.
135
136config USB_STORAGE_ALAUDA
137 tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
138 depends on USB_STORAGE
139 help
140 Say Y here to include additional code to support the Olympus MAUSB-10
141 and Fujifilm DPC-R1 USB Card reader/writer devices.
142
143 These devices are based on the Alauda chip and support both
144 XD and SmartMedia cards.
145
146 If this driver is compiled as a module, it will be named ums-alauda.
147
148config USB_STORAGE_ONETOUCH
149 tristate "Support OneTouch Button on Maxtor Hard Drives"
150 depends on USB_STORAGE
151 depends on INPUT=y || INPUT=USB_STORAGE
152 help
153 Say Y here to include additional code to support the Maxtor OneTouch
154 USB hard drive's onetouch button.
155
156 This code registers the button on the front of Maxtor OneTouch USB
157 hard drive's as an input device. An action can be associated with
158 this input in any keybinding software. (e.g. gnome's keyboard short-
159 cuts)
160
161 If this driver is compiled as a module, it will be named ums-onetouch.
162
163config USB_STORAGE_KARMA
164 tristate "Support for Rio Karma music player"
165 depends on USB_STORAGE
166 help
167 Say Y here to include additional code to support the Rio Karma
168 USB interface.
169
170 This code places the Rio Karma into mass storage mode, enabling
171 it to be mounted as an ordinary filesystem. Performing an eject
172 on the resulting scsi device node returns the Karma to normal
173 operation.
174
175 If this driver is compiled as a module, it will be named ums-karma.
176
177config USB_STORAGE_CYPRESS_ATACB
178 tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
179 depends on USB_STORAGE
180 ---help---
181 Say Y here if you want to use SAT (ata pass through) on devices based
182 on the Cypress USB/ATA bridge supporting ATACB. This will allow you
183 to use tools to tune and monitor your drive (like hdparm or smartctl).
184
185 If you say no here your device will still work with the standard usb
186 mass storage class.
187
188 If this driver is compiled as a module, it will be named ums-cypress.
189
190config USB_STORAGE_ENE_UB6250
191 tristate "USB ENE card reader support"
192 depends on SCSI
193 depends on USB_STORAGE
194 ---help---
195 Say Y here if you wish to control a ENE SD/MS Card reader.
196 To use SM card, please build driver/staging/keucr/keucr.ko
197
198 This option depends on 'SCSI' support being enabled, but you
199 probably also need 'SCSI device support: SCSI disk support'
200 (BLK_DEV_SD) for most USB storage devices.
201
202 To compile this driver as a module, choose M here: the
203 module will be called ums-eneub6250.
204
205config USB_UAS
206 tristate "USB Attached SCSI"
207 depends on SCSI && USB_STORAGE
208 help
209 The USB Attached SCSI protocol is supported by some USB
210 storage devices. It permits higher performance by supporting
211 multiple outstanding commands.
212
213 If you don't know whether you have a UAS device, it is safe to
214 say 'Y' or 'M' here and the kernel will use the right driver.
215
216 If you compile this driver as a module, it will be named uas.