Loading...
1/*
2 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
3 *
4 * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is largely derived from the Belkin USB Serial Adapter Driver
12 * (see belkin_sa.[ch]). All of the information about the device was acquired
13 * by using SniffUSB on Windows98. For technical details see mct_u232.h.
14 *
15 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to
16 * do the reverse engineering and how to write a USB serial device driver.
17 *
18 * TO BE DONE, TO BE CHECKED:
19 * DTR/RTS signal handling may be incomplete or incorrect. I have mainly
20 * implemented what I have seen with SniffUSB or found in belkin_sa.c.
21 * For further TODOs check also belkin_sa.c.
22 *
23 * TEST STATUS:
24 * Basic tests have been performed with minicom/zmodem transfers and
25 * modem dialing under Linux 2.4.0-test10 (for me it works fine).
26 *
27 * 04-Nov-2003 Bill Marr <marr at flex dot com>
28 * - Mimic Windows driver by sending 2 USB 'device request' messages
29 * following normal 'baud rate change' message. This allows data to be
30 * transmitted to RS-232 devices which don't assert the 'CTS' signal.
31 *
32 * 10-Nov-2001 Wolfgang Grandegger
33 * - Fixed an endianess problem with the baudrate selection for PowerPC.
34 *
35 * 06-Dec-2001 Martin Hamilton <martinh@gnu.org>
36 * - Added support for the Belkin F5U109 DB9 adaptor
37 *
38 * 30-May-2001 Greg Kroah-Hartman
39 * - switched from using spinlock to a semaphore, which fixes lots of
40 * problems.
41 *
42 * 04-May-2001 Stelian Pop
43 * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes
44 * instead of the device reported 32 (using 32 bytes causes many data
45 * loss, Windows driver uses 16 too).
46 *
47 * 02-May-2001 Stelian Pop
48 * - Fixed the baud calculation for Sitecom U232-P25 model
49 *
50 * 08-Apr-2001 gb
51 * - Identify version on module load.
52 *
53 * 06-Jan-2001 Cornel Ciocirlan
54 * - Added support for Sitecom U232-P25 model (Product Id 0x0230)
55 * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
56 *
57 * 29-Nov-2000 Greg Kroah-Hartman
58 * - Added device id table to fit with 2.4.0-test11 structure.
59 * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed
60 * (lots of things will change if/when the usb-serial core changes to
61 * handle these issues.
62 *
63 * 27-Nov-2000 Wolfgang Grandegge
64 * A version for kernel 2.4.0-test10 released to the Linux community
65 * (via linux-usb-devel).
66 */
67
68#include <linux/kernel.h>
69#include <linux/errno.h>
70#include <linux/init.h>
71#include <linux/slab.h>
72#include <linux/tty.h>
73#include <linux/tty_driver.h>
74#include <linux/tty_flip.h>
75#include <linux/module.h>
76#include <linux/spinlock.h>
77#include <linux/uaccess.h>
78#include <asm/unaligned.h>
79#include <linux/usb.h>
80#include <linux/usb/serial.h>
81#include <linux/serial.h>
82#include <linux/ioctl.h>
83#include "mct_u232.h"
84
85/*
86 * Version Information
87 */
88#define DRIVER_VERSION "z2.1" /* Linux in-kernel version */
89#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
90#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
91
92static int debug;
93
94/*
95 * Function prototypes
96 */
97static int mct_u232_startup(struct usb_serial *serial);
98static void mct_u232_release(struct usb_serial *serial);
99static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
100static void mct_u232_close(struct usb_serial_port *port);
101static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
102static void mct_u232_read_int_callback(struct urb *urb);
103static void mct_u232_set_termios(struct tty_struct *tty,
104 struct usb_serial_port *port, struct ktermios *old);
105static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
106static int mct_u232_tiocmget(struct tty_struct *tty);
107static int mct_u232_tiocmset(struct tty_struct *tty,
108 unsigned int set, unsigned int clear);
109static int mct_u232_ioctl(struct tty_struct *tty,
110 unsigned int cmd, unsigned long arg);
111static int mct_u232_get_icount(struct tty_struct *tty,
112 struct serial_icounter_struct *icount);
113static void mct_u232_throttle(struct tty_struct *tty);
114static void mct_u232_unthrottle(struct tty_struct *tty);
115
116
117/*
118 * All of the device info needed for the MCT USB-RS232 converter.
119 */
120static const struct usb_device_id id_table_combined[] = {
121 { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
122 { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
123 { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
124 { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
125 { } /* Terminating entry */
126};
127
128MODULE_DEVICE_TABLE(usb, id_table_combined);
129
130static struct usb_driver mct_u232_driver = {
131 .name = "mct_u232",
132 .probe = usb_serial_probe,
133 .disconnect = usb_serial_disconnect,
134 .id_table = id_table_combined,
135 .no_dynamic_id = 1,
136};
137
138static struct usb_serial_driver mct_u232_device = {
139 .driver = {
140 .owner = THIS_MODULE,
141 .name = "mct_u232",
142 },
143 .description = "MCT U232",
144 .usb_driver = &mct_u232_driver,
145 .id_table = id_table_combined,
146 .num_ports = 1,
147 .open = mct_u232_open,
148 .close = mct_u232_close,
149 .dtr_rts = mct_u232_dtr_rts,
150 .throttle = mct_u232_throttle,
151 .unthrottle = mct_u232_unthrottle,
152 .read_int_callback = mct_u232_read_int_callback,
153 .set_termios = mct_u232_set_termios,
154 .break_ctl = mct_u232_break_ctl,
155 .tiocmget = mct_u232_tiocmget,
156 .tiocmset = mct_u232_tiocmset,
157 .attach = mct_u232_startup,
158 .release = mct_u232_release,
159 .ioctl = mct_u232_ioctl,
160 .get_icount = mct_u232_get_icount,
161};
162
163struct mct_u232_private {
164 spinlock_t lock;
165 unsigned int control_state; /* Modem Line Setting (TIOCM) */
166 unsigned char last_lcr; /* Line Control Register */
167 unsigned char last_lsr; /* Line Status Register */
168 unsigned char last_msr; /* Modem Status Register */
169 unsigned int rx_flags; /* Throttling flags */
170 struct async_icount icount;
171 wait_queue_head_t msr_wait; /* for handling sleeping while waiting
172 for msr change to happen */
173};
174
175#define THROTTLED 0x01
176
177/*
178 * Handle vendor specific USB requests
179 */
180
181#define WDR_TIMEOUT 5000 /* default urb timeout */
182
183/*
184 * Later day 2.6.0-test kernels have new baud rates like B230400 which
185 * we do not know how to support. We ignore them for the moment.
186 */
187static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
188 speed_t value, speed_t *result)
189{
190 *result = value;
191
192 if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
193 || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
194 switch (value) {
195 case 300:
196 return 0x01;
197 case 600:
198 return 0x02; /* this one not tested */
199 case 1200:
200 return 0x03;
201 case 2400:
202 return 0x04;
203 case 4800:
204 return 0x06;
205 case 9600:
206 return 0x08;
207 case 19200:
208 return 0x09;
209 case 38400:
210 return 0x0a;
211 case 57600:
212 return 0x0b;
213 case 115200:
214 return 0x0c;
215 default:
216 *result = 9600;
217 return 0x08;
218 }
219 } else {
220 /* FIXME: Can we use any divider - should we do
221 divider = 115200/value;
222 real baud = 115200/divider */
223 switch (value) {
224 case 300: break;
225 case 600: break;
226 case 1200: break;
227 case 2400: break;
228 case 4800: break;
229 case 9600: break;
230 case 19200: break;
231 case 38400: break;
232 case 57600: break;
233 case 115200: break;
234 default:
235 value = 9600;
236 *result = 9600;
237 }
238 return 115200/value;
239 }
240}
241
242static int mct_u232_set_baud_rate(struct tty_struct *tty,
243 struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
244{
245 unsigned int divisor;
246 int rc;
247 unsigned char *buf;
248 unsigned char cts_enable_byte = 0;
249 speed_t speed;
250
251 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
252 if (buf == NULL)
253 return -ENOMEM;
254
255 divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
256 put_unaligned_le32(cpu_to_le32(divisor), buf);
257 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
258 MCT_U232_SET_BAUD_RATE_REQUEST,
259 MCT_U232_SET_REQUEST_TYPE,
260 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
261 WDR_TIMEOUT);
262 if (rc < 0) /*FIXME: What value speed results */
263 dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
264 value, rc);
265 else
266 tty_encode_baud_rate(tty, speed, speed);
267 dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
268
269 /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
270 always sends two extra USB 'device request' messages after the
271 'baud rate change' message. The actual functionality of the
272 request codes in these messages is not fully understood but these
273 particular codes are never seen in any operation besides a baud
274 rate change. Both of these messages send a single byte of data.
275 In the first message, the value of this byte is always zero.
276
277 The second message has been determined experimentally to control
278 whether data will be transmitted to a device which is not asserting
279 the 'CTS' signal. If the second message's data byte is zero, data
280 will be transmitted even if 'CTS' is not asserted (i.e. no hardware
281 flow control). if the second message's data byte is nonzero (a
282 value of 1 is used by this driver), data will not be transmitted to
283 a device which is not asserting 'CTS'.
284 */
285
286 buf[0] = 0;
287 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
288 MCT_U232_SET_UNKNOWN1_REQUEST,
289 MCT_U232_SET_REQUEST_TYPE,
290 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
291 WDR_TIMEOUT);
292 if (rc < 0)
293 dev_err(&port->dev, "Sending USB device request code %d "
294 "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
295 rc);
296
297 if (port && C_CRTSCTS(tty))
298 cts_enable_byte = 1;
299
300 dbg("set_baud_rate: send second control message, data = %02X",
301 cts_enable_byte);
302 buf[0] = cts_enable_byte;
303 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
304 MCT_U232_SET_CTS_REQUEST,
305 MCT_U232_SET_REQUEST_TYPE,
306 0, 0, buf, MCT_U232_SET_CTS_SIZE,
307 WDR_TIMEOUT);
308 if (rc < 0)
309 dev_err(&port->dev, "Sending USB device request code %d "
310 "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
311
312 kfree(buf);
313 return rc;
314} /* mct_u232_set_baud_rate */
315
316static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
317{
318 int rc;
319 unsigned char *buf;
320
321 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
322 if (buf == NULL)
323 return -ENOMEM;
324
325 buf[0] = lcr;
326 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
327 MCT_U232_SET_LINE_CTRL_REQUEST,
328 MCT_U232_SET_REQUEST_TYPE,
329 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
330 WDR_TIMEOUT);
331 if (rc < 0)
332 dev_err(&serial->dev->dev,
333 "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
334 dbg("set_line_ctrl: 0x%x", lcr);
335 kfree(buf);
336 return rc;
337} /* mct_u232_set_line_ctrl */
338
339static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
340 unsigned int control_state)
341{
342 int rc;
343 unsigned char mcr;
344 unsigned char *buf;
345
346 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
347 if (buf == NULL)
348 return -ENOMEM;
349
350 mcr = MCT_U232_MCR_NONE;
351 if (control_state & TIOCM_DTR)
352 mcr |= MCT_U232_MCR_DTR;
353 if (control_state & TIOCM_RTS)
354 mcr |= MCT_U232_MCR_RTS;
355
356 buf[0] = mcr;
357 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
358 MCT_U232_SET_MODEM_CTRL_REQUEST,
359 MCT_U232_SET_REQUEST_TYPE,
360 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
361 WDR_TIMEOUT);
362 if (rc < 0)
363 dev_err(&serial->dev->dev,
364 "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
365 dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
366
367 kfree(buf);
368 return rc;
369} /* mct_u232_set_modem_ctrl */
370
371static int mct_u232_get_modem_stat(struct usb_serial *serial,
372 unsigned char *msr)
373{
374 int rc;
375 unsigned char *buf;
376
377 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
378 if (buf == NULL) {
379 *msr = 0;
380 return -ENOMEM;
381 }
382 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
383 MCT_U232_GET_MODEM_STAT_REQUEST,
384 MCT_U232_GET_REQUEST_TYPE,
385 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
386 WDR_TIMEOUT);
387 if (rc < 0) {
388 dev_err(&serial->dev->dev,
389 "Get MODEM STATus failed (error = %d)\n", rc);
390 *msr = 0;
391 } else {
392 *msr = buf[0];
393 }
394 dbg("get_modem_stat: 0x%x", *msr);
395 kfree(buf);
396 return rc;
397} /* mct_u232_get_modem_stat */
398
399static void mct_u232_msr_to_icount(struct async_icount *icount,
400 unsigned char msr)
401{
402 /* Translate Control Line states */
403 if (msr & MCT_U232_MSR_DDSR)
404 icount->dsr++;
405 if (msr & MCT_U232_MSR_DCTS)
406 icount->cts++;
407 if (msr & MCT_U232_MSR_DRI)
408 icount->rng++;
409 if (msr & MCT_U232_MSR_DCD)
410 icount->dcd++;
411} /* mct_u232_msr_to_icount */
412
413static void mct_u232_msr_to_state(unsigned int *control_state,
414 unsigned char msr)
415{
416 /* Translate Control Line states */
417 if (msr & MCT_U232_MSR_DSR)
418 *control_state |= TIOCM_DSR;
419 else
420 *control_state &= ~TIOCM_DSR;
421 if (msr & MCT_U232_MSR_CTS)
422 *control_state |= TIOCM_CTS;
423 else
424 *control_state &= ~TIOCM_CTS;
425 if (msr & MCT_U232_MSR_RI)
426 *control_state |= TIOCM_RI;
427 else
428 *control_state &= ~TIOCM_RI;
429 if (msr & MCT_U232_MSR_CD)
430 *control_state |= TIOCM_CD;
431 else
432 *control_state &= ~TIOCM_CD;
433 dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
434} /* mct_u232_msr_to_state */
435
436/*
437 * Driver's tty interface functions
438 */
439
440static int mct_u232_startup(struct usb_serial *serial)
441{
442 struct mct_u232_private *priv;
443 struct usb_serial_port *port, *rport;
444
445 priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
446 if (!priv)
447 return -ENOMEM;
448 spin_lock_init(&priv->lock);
449 init_waitqueue_head(&priv->msr_wait);
450 usb_set_serial_port_data(serial->port[0], priv);
451
452 init_waitqueue_head(&serial->port[0]->write_wait);
453
454 /* Puh, that's dirty */
455 port = serial->port[0];
456 rport = serial->port[1];
457 /* No unlinking, it wasn't submitted yet. */
458 usb_free_urb(port->read_urb);
459 port->read_urb = rport->interrupt_in_urb;
460 rport->interrupt_in_urb = NULL;
461 port->read_urb->context = port;
462
463 return 0;
464} /* mct_u232_startup */
465
466
467static void mct_u232_release(struct usb_serial *serial)
468{
469 struct mct_u232_private *priv;
470 int i;
471
472 dbg("%s", __func__);
473
474 for (i = 0; i < serial->num_ports; ++i) {
475 /* My special items, the standard routines free my urbs */
476 priv = usb_get_serial_port_data(serial->port[i]);
477 kfree(priv);
478 }
479} /* mct_u232_release */
480
481static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
482{
483 struct usb_serial *serial = port->serial;
484 struct mct_u232_private *priv = usb_get_serial_port_data(port);
485 int retval = 0;
486 unsigned int control_state;
487 unsigned long flags;
488 unsigned char last_lcr;
489 unsigned char last_msr;
490
491 dbg("%s port %d", __func__, port->number);
492
493 /* Compensate for a hardware bug: although the Sitecom U232-P25
494 * device reports a maximum output packet size of 32 bytes,
495 * it seems to be able to accept only 16 bytes (and that's what
496 * SniffUSB says too...)
497 */
498 if (le16_to_cpu(serial->dev->descriptor.idProduct)
499 == MCT_U232_SITECOM_PID)
500 port->bulk_out_size = 16;
501
502 /* Do a defined restart: the normal serial device seems to
503 * always turn on DTR and RTS here, so do the same. I'm not
504 * sure if this is really necessary. But it should not harm
505 * either.
506 */
507 spin_lock_irqsave(&priv->lock, flags);
508 if (tty && (tty->termios->c_cflag & CBAUD))
509 priv->control_state = TIOCM_DTR | TIOCM_RTS;
510 else
511 priv->control_state = 0;
512
513 priv->last_lcr = (MCT_U232_DATA_BITS_8 |
514 MCT_U232_PARITY_NONE |
515 MCT_U232_STOP_BITS_1);
516 control_state = priv->control_state;
517 last_lcr = priv->last_lcr;
518 spin_unlock_irqrestore(&priv->lock, flags);
519 mct_u232_set_modem_ctrl(serial, control_state);
520 mct_u232_set_line_ctrl(serial, last_lcr);
521
522 /* Read modem status and update control state */
523 mct_u232_get_modem_stat(serial, &last_msr);
524 spin_lock_irqsave(&priv->lock, flags);
525 priv->last_msr = last_msr;
526 mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
527 spin_unlock_irqrestore(&priv->lock, flags);
528
529 port->read_urb->dev = port->serial->dev;
530 retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
531 if (retval) {
532 dev_err(&port->dev,
533 "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n",
534 port->read_urb->pipe, retval);
535 goto error;
536 }
537
538 port->interrupt_in_urb->dev = port->serial->dev;
539 retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
540 if (retval) {
541 usb_kill_urb(port->read_urb);
542 dev_err(&port->dev,
543 "usb_submit_urb(read int) failed pipe 0x%x err %d",
544 port->interrupt_in_urb->pipe, retval);
545 goto error;
546 }
547 return 0;
548
549error:
550 return retval;
551} /* mct_u232_open */
552
553static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
554{
555 unsigned int control_state;
556 struct mct_u232_private *priv = usb_get_serial_port_data(port);
557
558 mutex_lock(&port->serial->disc_mutex);
559 if (!port->serial->disconnected) {
560 /* drop DTR and RTS */
561 spin_lock_irq(&priv->lock);
562 if (on)
563 priv->control_state |= TIOCM_DTR | TIOCM_RTS;
564 else
565 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
566 control_state = priv->control_state;
567 spin_unlock_irq(&priv->lock);
568 mct_u232_set_modem_ctrl(port->serial, control_state);
569 }
570 mutex_unlock(&port->serial->disc_mutex);
571}
572
573static void mct_u232_close(struct usb_serial_port *port)
574{
575 dbg("%s port %d", __func__, port->number);
576
577 if (port->serial->dev) {
578 /* shutdown our urbs */
579 usb_kill_urb(port->write_urb);
580 usb_kill_urb(port->read_urb);
581 usb_kill_urb(port->interrupt_in_urb);
582 }
583} /* mct_u232_close */
584
585
586static void mct_u232_read_int_callback(struct urb *urb)
587{
588 struct usb_serial_port *port = urb->context;
589 struct mct_u232_private *priv = usb_get_serial_port_data(port);
590 struct usb_serial *serial = port->serial;
591 struct tty_struct *tty;
592 unsigned char *data = urb->transfer_buffer;
593 int retval;
594 int status = urb->status;
595 unsigned long flags;
596
597 switch (status) {
598 case 0:
599 /* success */
600 break;
601 case -ECONNRESET:
602 case -ENOENT:
603 case -ESHUTDOWN:
604 /* this urb is terminated, clean up */
605 dbg("%s - urb shutting down with status: %d",
606 __func__, status);
607 return;
608 default:
609 dbg("%s - nonzero urb status received: %d",
610 __func__, status);
611 goto exit;
612 }
613
614 if (!serial) {
615 dbg("%s - bad serial pointer, exiting", __func__);
616 return;
617 }
618
619 dbg("%s - port %d", __func__, port->number);
620 usb_serial_debug_data(debug, &port->dev, __func__,
621 urb->actual_length, data);
622
623 /*
624 * Work-a-round: handle the 'usual' bulk-in pipe here
625 */
626 if (urb->transfer_buffer_length > 2) {
627 if (urb->actual_length) {
628 tty = tty_port_tty_get(&port->port);
629 if (tty) {
630 tty_insert_flip_string(tty, data,
631 urb->actual_length);
632 tty_flip_buffer_push(tty);
633 }
634 tty_kref_put(tty);
635 }
636 goto exit;
637 }
638
639 /*
640 * The interrupt-in pipe signals exceptional conditions (modem line
641 * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
642 */
643 spin_lock_irqsave(&priv->lock, flags);
644 priv->last_msr = data[MCT_U232_MSR_INDEX];
645
646 /* Record Control Line states */
647 mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
648
649 mct_u232_msr_to_icount(&priv->icount, priv->last_msr);
650
651#if 0
652 /* Not yet handled. See belkin_sa.c for further information */
653 /* Now to report any errors */
654 priv->last_lsr = data[MCT_U232_LSR_INDEX];
655 /*
656 * fill in the flip buffer here, but I do not know the relation
657 * to the current/next receive buffer or characters. I need
658 * to look in to this before committing any code.
659 */
660 if (priv->last_lsr & MCT_U232_LSR_ERR) {
661 tty = tty_port_tty_get(&port->port);
662 /* Overrun Error */
663 if (priv->last_lsr & MCT_U232_LSR_OE) {
664 }
665 /* Parity Error */
666 if (priv->last_lsr & MCT_U232_LSR_PE) {
667 }
668 /* Framing Error */
669 if (priv->last_lsr & MCT_U232_LSR_FE) {
670 }
671 /* Break Indicator */
672 if (priv->last_lsr & MCT_U232_LSR_BI) {
673 }
674 tty_kref_put(tty);
675 }
676#endif
677 wake_up_interruptible(&priv->msr_wait);
678 spin_unlock_irqrestore(&priv->lock, flags);
679exit:
680 retval = usb_submit_urb(urb, GFP_ATOMIC);
681 if (retval)
682 dev_err(&port->dev,
683 "%s - usb_submit_urb failed with result %d\n",
684 __func__, retval);
685} /* mct_u232_read_int_callback */
686
687static void mct_u232_set_termios(struct tty_struct *tty,
688 struct usb_serial_port *port,
689 struct ktermios *old_termios)
690{
691 struct usb_serial *serial = port->serial;
692 struct mct_u232_private *priv = usb_get_serial_port_data(port);
693 struct ktermios *termios = tty->termios;
694 unsigned int cflag = termios->c_cflag;
695 unsigned int old_cflag = old_termios->c_cflag;
696 unsigned long flags;
697 unsigned int control_state;
698 unsigned char last_lcr;
699
700 /* get a local copy of the current port settings */
701 spin_lock_irqsave(&priv->lock, flags);
702 control_state = priv->control_state;
703 spin_unlock_irqrestore(&priv->lock, flags);
704 last_lcr = 0;
705
706 /*
707 * Update baud rate.
708 * Do not attempt to cache old rates and skip settings,
709 * disconnects screw such tricks up completely.
710 * Premature optimization is the root of all evil.
711 */
712
713 /* reassert DTR and RTS on transition from B0 */
714 if ((old_cflag & CBAUD) == B0) {
715 dbg("%s: baud was B0", __func__);
716 control_state |= TIOCM_DTR | TIOCM_RTS;
717 mct_u232_set_modem_ctrl(serial, control_state);
718 }
719
720 mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
721
722 if ((cflag & CBAUD) == B0) {
723 dbg("%s: baud is B0", __func__);
724 /* Drop RTS and DTR */
725 control_state &= ~(TIOCM_DTR | TIOCM_RTS);
726 mct_u232_set_modem_ctrl(serial, control_state);
727 }
728
729 /*
730 * Update line control register (LCR)
731 */
732
733 /* set the parity */
734 if (cflag & PARENB)
735 last_lcr |= (cflag & PARODD) ?
736 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
737 else
738 last_lcr |= MCT_U232_PARITY_NONE;
739
740 /* set the number of data bits */
741 switch (cflag & CSIZE) {
742 case CS5:
743 last_lcr |= MCT_U232_DATA_BITS_5; break;
744 case CS6:
745 last_lcr |= MCT_U232_DATA_BITS_6; break;
746 case CS7:
747 last_lcr |= MCT_U232_DATA_BITS_7; break;
748 case CS8:
749 last_lcr |= MCT_U232_DATA_BITS_8; break;
750 default:
751 dev_err(&port->dev,
752 "CSIZE was not CS5-CS8, using default of 8\n");
753 last_lcr |= MCT_U232_DATA_BITS_8;
754 break;
755 }
756
757 termios->c_cflag &= ~CMSPAR;
758
759 /* set the number of stop bits */
760 last_lcr |= (cflag & CSTOPB) ?
761 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
762
763 mct_u232_set_line_ctrl(serial, last_lcr);
764
765 /* save off the modified port settings */
766 spin_lock_irqsave(&priv->lock, flags);
767 priv->control_state = control_state;
768 priv->last_lcr = last_lcr;
769 spin_unlock_irqrestore(&priv->lock, flags);
770} /* mct_u232_set_termios */
771
772static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
773{
774 struct usb_serial_port *port = tty->driver_data;
775 struct usb_serial *serial = port->serial;
776 struct mct_u232_private *priv = usb_get_serial_port_data(port);
777 unsigned char lcr;
778 unsigned long flags;
779
780 dbg("%sstate=%d", __func__, break_state);
781
782 spin_lock_irqsave(&priv->lock, flags);
783 lcr = priv->last_lcr;
784
785 if (break_state)
786 lcr |= MCT_U232_SET_BREAK;
787 spin_unlock_irqrestore(&priv->lock, flags);
788
789 mct_u232_set_line_ctrl(serial, lcr);
790} /* mct_u232_break_ctl */
791
792
793static int mct_u232_tiocmget(struct tty_struct *tty)
794{
795 struct usb_serial_port *port = tty->driver_data;
796 struct mct_u232_private *priv = usb_get_serial_port_data(port);
797 unsigned int control_state;
798 unsigned long flags;
799
800 dbg("%s", __func__);
801
802 spin_lock_irqsave(&priv->lock, flags);
803 control_state = priv->control_state;
804 spin_unlock_irqrestore(&priv->lock, flags);
805
806 return control_state;
807}
808
809static int mct_u232_tiocmset(struct tty_struct *tty,
810 unsigned int set, unsigned int clear)
811{
812 struct usb_serial_port *port = tty->driver_data;
813 struct usb_serial *serial = port->serial;
814 struct mct_u232_private *priv = usb_get_serial_port_data(port);
815 unsigned int control_state;
816 unsigned long flags;
817
818 dbg("%s", __func__);
819
820 spin_lock_irqsave(&priv->lock, flags);
821 control_state = priv->control_state;
822
823 if (set & TIOCM_RTS)
824 control_state |= TIOCM_RTS;
825 if (set & TIOCM_DTR)
826 control_state |= TIOCM_DTR;
827 if (clear & TIOCM_RTS)
828 control_state &= ~TIOCM_RTS;
829 if (clear & TIOCM_DTR)
830 control_state &= ~TIOCM_DTR;
831
832 priv->control_state = control_state;
833 spin_unlock_irqrestore(&priv->lock, flags);
834 return mct_u232_set_modem_ctrl(serial, control_state);
835}
836
837static void mct_u232_throttle(struct tty_struct *tty)
838{
839 struct usb_serial_port *port = tty->driver_data;
840 struct mct_u232_private *priv = usb_get_serial_port_data(port);
841 unsigned int control_state;
842
843 dbg("%s - port %d", __func__, port->number);
844
845 spin_lock_irq(&priv->lock);
846 priv->rx_flags |= THROTTLED;
847 if (C_CRTSCTS(tty)) {
848 priv->control_state &= ~TIOCM_RTS;
849 control_state = priv->control_state;
850 spin_unlock_irq(&priv->lock);
851 (void) mct_u232_set_modem_ctrl(port->serial, control_state);
852 } else {
853 spin_unlock_irq(&priv->lock);
854 }
855}
856
857static void mct_u232_unthrottle(struct tty_struct *tty)
858{
859 struct usb_serial_port *port = tty->driver_data;
860 struct mct_u232_private *priv = usb_get_serial_port_data(port);
861 unsigned int control_state;
862
863 dbg("%s - port %d", __func__, port->number);
864
865 spin_lock_irq(&priv->lock);
866 if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
867 priv->rx_flags &= ~THROTTLED;
868 priv->control_state |= TIOCM_RTS;
869 control_state = priv->control_state;
870 spin_unlock_irq(&priv->lock);
871 (void) mct_u232_set_modem_ctrl(port->serial, control_state);
872 } else {
873 spin_unlock_irq(&priv->lock);
874 }
875}
876
877static int mct_u232_ioctl(struct tty_struct *tty,
878 unsigned int cmd, unsigned long arg)
879{
880 DEFINE_WAIT(wait);
881 struct usb_serial_port *port = tty->driver_data;
882 struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
883 struct async_icount cnow, cprev;
884 unsigned long flags;
885
886 dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
887
888 switch (cmd) {
889
890 case TIOCMIWAIT:
891
892 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
893
894 spin_lock_irqsave(&mct_u232_port->lock, flags);
895 cprev = mct_u232_port->icount;
896 spin_unlock_irqrestore(&mct_u232_port->lock, flags);
897 for ( ; ; ) {
898 prepare_to_wait(&mct_u232_port->msr_wait,
899 &wait, TASK_INTERRUPTIBLE);
900 schedule();
901 finish_wait(&mct_u232_port->msr_wait, &wait);
902 /* see if a signal did it */
903 if (signal_pending(current))
904 return -ERESTARTSYS;
905 spin_lock_irqsave(&mct_u232_port->lock, flags);
906 cnow = mct_u232_port->icount;
907 spin_unlock_irqrestore(&mct_u232_port->lock, flags);
908 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
909 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
910 return -EIO; /* no change => error */
911 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
912 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
913 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
914 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
915 return 0;
916 }
917 cprev = cnow;
918 }
919
920 }
921 return -ENOIOCTLCMD;
922}
923
924static int mct_u232_get_icount(struct tty_struct *tty,
925 struct serial_icounter_struct *icount)
926{
927 struct usb_serial_port *port = tty->driver_data;
928 struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
929 struct async_icount *ic = &mct_u232_port->icount;
930 unsigned long flags;
931
932 spin_lock_irqsave(&mct_u232_port->lock, flags);
933
934 icount->cts = ic->cts;
935 icount->dsr = ic->dsr;
936 icount->rng = ic->rng;
937 icount->dcd = ic->dcd;
938 icount->rx = ic->rx;
939 icount->tx = ic->tx;
940 icount->frame = ic->frame;
941 icount->overrun = ic->overrun;
942 icount->parity = ic->parity;
943 icount->brk = ic->brk;
944 icount->buf_overrun = ic->buf_overrun;
945
946 spin_unlock_irqrestore(&mct_u232_port->lock, flags);
947
948 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
949 __func__, port->number, icount->rx, icount->tx);
950 return 0;
951}
952
953static int __init mct_u232_init(void)
954{
955 int retval;
956 retval = usb_serial_register(&mct_u232_device);
957 if (retval)
958 goto failed_usb_serial_register;
959 retval = usb_register(&mct_u232_driver);
960 if (retval)
961 goto failed_usb_register;
962 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
963 DRIVER_DESC "\n");
964 return 0;
965failed_usb_register:
966 usb_serial_deregister(&mct_u232_device);
967failed_usb_serial_register:
968 return retval;
969}
970
971
972static void __exit mct_u232_exit(void)
973{
974 usb_deregister(&mct_u232_driver);
975 usb_serial_deregister(&mct_u232_device);
976}
977
978module_init(mct_u232_init);
979module_exit(mct_u232_exit);
980
981MODULE_AUTHOR(DRIVER_AUTHOR);
982MODULE_DESCRIPTION(DRIVER_DESC);
983MODULE_LICENSE("GPL");
984
985module_param(debug, bool, S_IRUGO | S_IWUSR);
986MODULE_PARM_DESC(debug, "Debug enabled or not");
1/*
2 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
3 *
4 * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is largely derived from the Belkin USB Serial Adapter Driver
12 * (see belkin_sa.[ch]). All of the information about the device was acquired
13 * by using SniffUSB on Windows98. For technical details see mct_u232.h.
14 *
15 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to
16 * do the reverse engineering and how to write a USB serial device driver.
17 *
18 * TO BE DONE, TO BE CHECKED:
19 * DTR/RTS signal handling may be incomplete or incorrect. I have mainly
20 * implemented what I have seen with SniffUSB or found in belkin_sa.c.
21 * For further TODOs check also belkin_sa.c.
22 */
23
24#include <linux/kernel.h>
25#include <linux/errno.h>
26#include <linux/slab.h>
27#include <linux/tty.h>
28#include <linux/tty_driver.h>
29#include <linux/tty_flip.h>
30#include <linux/module.h>
31#include <linux/spinlock.h>
32#include <linux/uaccess.h>
33#include <asm/unaligned.h>
34#include <linux/usb.h>
35#include <linux/usb/serial.h>
36#include <linux/serial.h>
37#include "mct_u232.h"
38
39#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
40#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
41
42/*
43 * Function prototypes
44 */
45static int mct_u232_port_probe(struct usb_serial_port *port);
46static int mct_u232_port_remove(struct usb_serial_port *remove);
47static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
48static void mct_u232_close(struct usb_serial_port *port);
49static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
50static void mct_u232_read_int_callback(struct urb *urb);
51static void mct_u232_set_termios(struct tty_struct *tty,
52 struct usb_serial_port *port, struct ktermios *old);
53static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
54static int mct_u232_tiocmget(struct tty_struct *tty);
55static int mct_u232_tiocmset(struct tty_struct *tty,
56 unsigned int set, unsigned int clear);
57static void mct_u232_throttle(struct tty_struct *tty);
58static void mct_u232_unthrottle(struct tty_struct *tty);
59
60
61/*
62 * All of the device info needed for the MCT USB-RS232 converter.
63 */
64static const struct usb_device_id id_table[] = {
65 { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
66 { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
67 { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
68 { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
69 { } /* Terminating entry */
70};
71MODULE_DEVICE_TABLE(usb, id_table);
72
73static struct usb_serial_driver mct_u232_device = {
74 .driver = {
75 .owner = THIS_MODULE,
76 .name = "mct_u232",
77 },
78 .description = "MCT U232",
79 .id_table = id_table,
80 .num_ports = 1,
81 .open = mct_u232_open,
82 .close = mct_u232_close,
83 .dtr_rts = mct_u232_dtr_rts,
84 .throttle = mct_u232_throttle,
85 .unthrottle = mct_u232_unthrottle,
86 .read_int_callback = mct_u232_read_int_callback,
87 .set_termios = mct_u232_set_termios,
88 .break_ctl = mct_u232_break_ctl,
89 .tiocmget = mct_u232_tiocmget,
90 .tiocmset = mct_u232_tiocmset,
91 .tiocmiwait = usb_serial_generic_tiocmiwait,
92 .port_probe = mct_u232_port_probe,
93 .port_remove = mct_u232_port_remove,
94 .get_icount = usb_serial_generic_get_icount,
95};
96
97static struct usb_serial_driver * const serial_drivers[] = {
98 &mct_u232_device, NULL
99};
100
101struct mct_u232_private {
102 struct urb *read_urb;
103 spinlock_t lock;
104 unsigned int control_state; /* Modem Line Setting (TIOCM) */
105 unsigned char last_lcr; /* Line Control Register */
106 unsigned char last_lsr; /* Line Status Register */
107 unsigned char last_msr; /* Modem Status Register */
108 unsigned int rx_flags; /* Throttling flags */
109};
110
111#define THROTTLED 0x01
112
113/*
114 * Handle vendor specific USB requests
115 */
116
117#define WDR_TIMEOUT 5000 /* default urb timeout */
118
119/*
120 * Later day 2.6.0-test kernels have new baud rates like B230400 which
121 * we do not know how to support. We ignore them for the moment.
122 */
123static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
124 speed_t value, speed_t *result)
125{
126 *result = value;
127
128 if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
129 || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
130 switch (value) {
131 case 300:
132 return 0x01;
133 case 600:
134 return 0x02; /* this one not tested */
135 case 1200:
136 return 0x03;
137 case 2400:
138 return 0x04;
139 case 4800:
140 return 0x06;
141 case 9600:
142 return 0x08;
143 case 19200:
144 return 0x09;
145 case 38400:
146 return 0x0a;
147 case 57600:
148 return 0x0b;
149 case 115200:
150 return 0x0c;
151 default:
152 *result = 9600;
153 return 0x08;
154 }
155 } else {
156 /* FIXME: Can we use any divider - should we do
157 divider = 115200/value;
158 real baud = 115200/divider */
159 switch (value) {
160 case 300: break;
161 case 600: break;
162 case 1200: break;
163 case 2400: break;
164 case 4800: break;
165 case 9600: break;
166 case 19200: break;
167 case 38400: break;
168 case 57600: break;
169 case 115200: break;
170 default:
171 value = 9600;
172 *result = 9600;
173 }
174 return 115200/value;
175 }
176}
177
178static int mct_u232_set_baud_rate(struct tty_struct *tty,
179 struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
180{
181 unsigned int divisor;
182 int rc;
183 unsigned char *buf;
184 unsigned char cts_enable_byte = 0;
185 speed_t speed;
186
187 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
188 if (buf == NULL)
189 return -ENOMEM;
190
191 divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
192 put_unaligned_le32(cpu_to_le32(divisor), buf);
193 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
194 MCT_U232_SET_BAUD_RATE_REQUEST,
195 MCT_U232_SET_REQUEST_TYPE,
196 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
197 WDR_TIMEOUT);
198 if (rc < 0) /*FIXME: What value speed results */
199 dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
200 value, rc);
201 else
202 tty_encode_baud_rate(tty, speed, speed);
203 dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor);
204
205 /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
206 always sends two extra USB 'device request' messages after the
207 'baud rate change' message. The actual functionality of the
208 request codes in these messages is not fully understood but these
209 particular codes are never seen in any operation besides a baud
210 rate change. Both of these messages send a single byte of data.
211 In the first message, the value of this byte is always zero.
212
213 The second message has been determined experimentally to control
214 whether data will be transmitted to a device which is not asserting
215 the 'CTS' signal. If the second message's data byte is zero, data
216 will be transmitted even if 'CTS' is not asserted (i.e. no hardware
217 flow control). if the second message's data byte is nonzero (a
218 value of 1 is used by this driver), data will not be transmitted to
219 a device which is not asserting 'CTS'.
220 */
221
222 buf[0] = 0;
223 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
224 MCT_U232_SET_UNKNOWN1_REQUEST,
225 MCT_U232_SET_REQUEST_TYPE,
226 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
227 WDR_TIMEOUT);
228 if (rc < 0)
229 dev_err(&port->dev, "Sending USB device request code %d "
230 "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
231 rc);
232
233 if (port && C_CRTSCTS(tty))
234 cts_enable_byte = 1;
235
236 dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n",
237 cts_enable_byte);
238 buf[0] = cts_enable_byte;
239 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
240 MCT_U232_SET_CTS_REQUEST,
241 MCT_U232_SET_REQUEST_TYPE,
242 0, 0, buf, MCT_U232_SET_CTS_SIZE,
243 WDR_TIMEOUT);
244 if (rc < 0)
245 dev_err(&port->dev, "Sending USB device request code %d "
246 "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
247
248 kfree(buf);
249 return rc;
250} /* mct_u232_set_baud_rate */
251
252static int mct_u232_set_line_ctrl(struct usb_serial_port *port,
253 unsigned char lcr)
254{
255 int rc;
256 unsigned char *buf;
257
258 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
259 if (buf == NULL)
260 return -ENOMEM;
261
262 buf[0] = lcr;
263 rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
264 MCT_U232_SET_LINE_CTRL_REQUEST,
265 MCT_U232_SET_REQUEST_TYPE,
266 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
267 WDR_TIMEOUT);
268 if (rc < 0)
269 dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
270 dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr);
271 kfree(buf);
272 return rc;
273} /* mct_u232_set_line_ctrl */
274
275static int mct_u232_set_modem_ctrl(struct usb_serial_port *port,
276 unsigned int control_state)
277{
278 int rc;
279 unsigned char mcr;
280 unsigned char *buf;
281
282 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
283 if (buf == NULL)
284 return -ENOMEM;
285
286 mcr = MCT_U232_MCR_NONE;
287 if (control_state & TIOCM_DTR)
288 mcr |= MCT_U232_MCR_DTR;
289 if (control_state & TIOCM_RTS)
290 mcr |= MCT_U232_MCR_RTS;
291
292 buf[0] = mcr;
293 rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
294 MCT_U232_SET_MODEM_CTRL_REQUEST,
295 MCT_U232_SET_REQUEST_TYPE,
296 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
297 WDR_TIMEOUT);
298 kfree(buf);
299
300 dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr);
301
302 if (rc < 0) {
303 dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
304 return rc;
305 }
306 return 0;
307} /* mct_u232_set_modem_ctrl */
308
309static int mct_u232_get_modem_stat(struct usb_serial_port *port,
310 unsigned char *msr)
311{
312 int rc;
313 unsigned char *buf;
314
315 buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
316 if (buf == NULL) {
317 *msr = 0;
318 return -ENOMEM;
319 }
320 rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
321 MCT_U232_GET_MODEM_STAT_REQUEST,
322 MCT_U232_GET_REQUEST_TYPE,
323 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
324 WDR_TIMEOUT);
325 if (rc < 0) {
326 dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
327 *msr = 0;
328 } else {
329 *msr = buf[0];
330 }
331 dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr);
332 kfree(buf);
333 return rc;
334} /* mct_u232_get_modem_stat */
335
336static void mct_u232_msr_to_icount(struct async_icount *icount,
337 unsigned char msr)
338{
339 /* Translate Control Line states */
340 if (msr & MCT_U232_MSR_DDSR)
341 icount->dsr++;
342 if (msr & MCT_U232_MSR_DCTS)
343 icount->cts++;
344 if (msr & MCT_U232_MSR_DRI)
345 icount->rng++;
346 if (msr & MCT_U232_MSR_DCD)
347 icount->dcd++;
348} /* mct_u232_msr_to_icount */
349
350static void mct_u232_msr_to_state(struct usb_serial_port *port,
351 unsigned int *control_state, unsigned char msr)
352{
353 /* Translate Control Line states */
354 if (msr & MCT_U232_MSR_DSR)
355 *control_state |= TIOCM_DSR;
356 else
357 *control_state &= ~TIOCM_DSR;
358 if (msr & MCT_U232_MSR_CTS)
359 *control_state |= TIOCM_CTS;
360 else
361 *control_state &= ~TIOCM_CTS;
362 if (msr & MCT_U232_MSR_RI)
363 *control_state |= TIOCM_RI;
364 else
365 *control_state &= ~TIOCM_RI;
366 if (msr & MCT_U232_MSR_CD)
367 *control_state |= TIOCM_CD;
368 else
369 *control_state &= ~TIOCM_CD;
370 dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state);
371} /* mct_u232_msr_to_state */
372
373/*
374 * Driver's tty interface functions
375 */
376
377static int mct_u232_port_probe(struct usb_serial_port *port)
378{
379 struct mct_u232_private *priv;
380
381 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
382 if (!priv)
383 return -ENOMEM;
384
385 /* Use second interrupt-in endpoint for reading. */
386 priv->read_urb = port->serial->port[1]->interrupt_in_urb;
387 priv->read_urb->context = port;
388
389 spin_lock_init(&priv->lock);
390
391 usb_set_serial_port_data(port, priv);
392
393 return 0;
394}
395
396static int mct_u232_port_remove(struct usb_serial_port *port)
397{
398 struct mct_u232_private *priv;
399
400 priv = usb_get_serial_port_data(port);
401 kfree(priv);
402
403 return 0;
404}
405
406static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
407{
408 struct usb_serial *serial = port->serial;
409 struct mct_u232_private *priv = usb_get_serial_port_data(port);
410 int retval = 0;
411 unsigned int control_state;
412 unsigned long flags;
413 unsigned char last_lcr;
414 unsigned char last_msr;
415
416 /* Compensate for a hardware bug: although the Sitecom U232-P25
417 * device reports a maximum output packet size of 32 bytes,
418 * it seems to be able to accept only 16 bytes (and that's what
419 * SniffUSB says too...)
420 */
421 if (le16_to_cpu(serial->dev->descriptor.idProduct)
422 == MCT_U232_SITECOM_PID)
423 port->bulk_out_size = 16;
424
425 /* Do a defined restart: the normal serial device seems to
426 * always turn on DTR and RTS here, so do the same. I'm not
427 * sure if this is really necessary. But it should not harm
428 * either.
429 */
430 spin_lock_irqsave(&priv->lock, flags);
431 if (tty && (tty->termios.c_cflag & CBAUD))
432 priv->control_state = TIOCM_DTR | TIOCM_RTS;
433 else
434 priv->control_state = 0;
435
436 priv->last_lcr = (MCT_U232_DATA_BITS_8 |
437 MCT_U232_PARITY_NONE |
438 MCT_U232_STOP_BITS_1);
439 control_state = priv->control_state;
440 last_lcr = priv->last_lcr;
441 spin_unlock_irqrestore(&priv->lock, flags);
442 mct_u232_set_modem_ctrl(port, control_state);
443 mct_u232_set_line_ctrl(port, last_lcr);
444
445 /* Read modem status and update control state */
446 mct_u232_get_modem_stat(port, &last_msr);
447 spin_lock_irqsave(&priv->lock, flags);
448 priv->last_msr = last_msr;
449 mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
450 spin_unlock_irqrestore(&priv->lock, flags);
451
452 retval = usb_submit_urb(priv->read_urb, GFP_KERNEL);
453 if (retval) {
454 dev_err(&port->dev,
455 "usb_submit_urb(read) failed pipe 0x%x err %d\n",
456 port->read_urb->pipe, retval);
457 goto error;
458 }
459
460 retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
461 if (retval) {
462 usb_kill_urb(priv->read_urb);
463 dev_err(&port->dev,
464 "usb_submit_urb(read int) failed pipe 0x%x err %d",
465 port->interrupt_in_urb->pipe, retval);
466 goto error;
467 }
468 return 0;
469
470error:
471 return retval;
472} /* mct_u232_open */
473
474static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
475{
476 unsigned int control_state;
477 struct mct_u232_private *priv = usb_get_serial_port_data(port);
478
479 spin_lock_irq(&priv->lock);
480 if (on)
481 priv->control_state |= TIOCM_DTR | TIOCM_RTS;
482 else
483 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
484 control_state = priv->control_state;
485 spin_unlock_irq(&priv->lock);
486
487 mct_u232_set_modem_ctrl(port, control_state);
488}
489
490static void mct_u232_close(struct usb_serial_port *port)
491{
492 struct mct_u232_private *priv = usb_get_serial_port_data(port);
493
494 usb_kill_urb(priv->read_urb);
495 usb_kill_urb(port->interrupt_in_urb);
496
497 usb_serial_generic_close(port);
498} /* mct_u232_close */
499
500
501static void mct_u232_read_int_callback(struct urb *urb)
502{
503 struct usb_serial_port *port = urb->context;
504 struct mct_u232_private *priv = usb_get_serial_port_data(port);
505 unsigned char *data = urb->transfer_buffer;
506 int retval;
507 int status = urb->status;
508 unsigned long flags;
509
510 switch (status) {
511 case 0:
512 /* success */
513 break;
514 case -ECONNRESET:
515 case -ENOENT:
516 case -ESHUTDOWN:
517 /* this urb is terminated, clean up */
518 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
519 __func__, status);
520 return;
521 default:
522 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
523 __func__, status);
524 goto exit;
525 }
526
527 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
528
529 /*
530 * Work-a-round: handle the 'usual' bulk-in pipe here
531 */
532 if (urb->transfer_buffer_length > 2) {
533 if (urb->actual_length) {
534 tty_insert_flip_string(&port->port, data,
535 urb->actual_length);
536 tty_flip_buffer_push(&port->port);
537 }
538 goto exit;
539 }
540
541 /*
542 * The interrupt-in pipe signals exceptional conditions (modem line
543 * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
544 */
545 spin_lock_irqsave(&priv->lock, flags);
546 priv->last_msr = data[MCT_U232_MSR_INDEX];
547
548 /* Record Control Line states */
549 mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
550
551 mct_u232_msr_to_icount(&port->icount, priv->last_msr);
552
553#if 0
554 /* Not yet handled. See belkin_sa.c for further information */
555 /* Now to report any errors */
556 priv->last_lsr = data[MCT_U232_LSR_INDEX];
557 /*
558 * fill in the flip buffer here, but I do not know the relation
559 * to the current/next receive buffer or characters. I need
560 * to look in to this before committing any code.
561 */
562 if (priv->last_lsr & MCT_U232_LSR_ERR) {
563 tty = tty_port_tty_get(&port->port);
564 /* Overrun Error */
565 if (priv->last_lsr & MCT_U232_LSR_OE) {
566 }
567 /* Parity Error */
568 if (priv->last_lsr & MCT_U232_LSR_PE) {
569 }
570 /* Framing Error */
571 if (priv->last_lsr & MCT_U232_LSR_FE) {
572 }
573 /* Break Indicator */
574 if (priv->last_lsr & MCT_U232_LSR_BI) {
575 }
576 tty_kref_put(tty);
577 }
578#endif
579 wake_up_interruptible(&port->port.delta_msr_wait);
580 spin_unlock_irqrestore(&priv->lock, flags);
581exit:
582 retval = usb_submit_urb(urb, GFP_ATOMIC);
583 if (retval)
584 dev_err(&port->dev,
585 "%s - usb_submit_urb failed with result %d\n",
586 __func__, retval);
587} /* mct_u232_read_int_callback */
588
589static void mct_u232_set_termios(struct tty_struct *tty,
590 struct usb_serial_port *port,
591 struct ktermios *old_termios)
592{
593 struct usb_serial *serial = port->serial;
594 struct mct_u232_private *priv = usb_get_serial_port_data(port);
595 struct ktermios *termios = &tty->termios;
596 unsigned int cflag = termios->c_cflag;
597 unsigned int old_cflag = old_termios->c_cflag;
598 unsigned long flags;
599 unsigned int control_state;
600 unsigned char last_lcr;
601
602 /* get a local copy of the current port settings */
603 spin_lock_irqsave(&priv->lock, flags);
604 control_state = priv->control_state;
605 spin_unlock_irqrestore(&priv->lock, flags);
606 last_lcr = 0;
607
608 /*
609 * Update baud rate.
610 * Do not attempt to cache old rates and skip settings,
611 * disconnects screw such tricks up completely.
612 * Premature optimization is the root of all evil.
613 */
614
615 /* reassert DTR and RTS on transition from B0 */
616 if ((old_cflag & CBAUD) == B0) {
617 dev_dbg(&port->dev, "%s: baud was B0\n", __func__);
618 control_state |= TIOCM_DTR | TIOCM_RTS;
619 mct_u232_set_modem_ctrl(port, control_state);
620 }
621
622 mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
623
624 if ((cflag & CBAUD) == B0) {
625 dev_dbg(&port->dev, "%s: baud is B0\n", __func__);
626 /* Drop RTS and DTR */
627 control_state &= ~(TIOCM_DTR | TIOCM_RTS);
628 mct_u232_set_modem_ctrl(port, control_state);
629 }
630
631 /*
632 * Update line control register (LCR)
633 */
634
635 /* set the parity */
636 if (cflag & PARENB)
637 last_lcr |= (cflag & PARODD) ?
638 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
639 else
640 last_lcr |= MCT_U232_PARITY_NONE;
641
642 /* set the number of data bits */
643 switch (cflag & CSIZE) {
644 case CS5:
645 last_lcr |= MCT_U232_DATA_BITS_5; break;
646 case CS6:
647 last_lcr |= MCT_U232_DATA_BITS_6; break;
648 case CS7:
649 last_lcr |= MCT_U232_DATA_BITS_7; break;
650 case CS8:
651 last_lcr |= MCT_U232_DATA_BITS_8; break;
652 default:
653 dev_err(&port->dev,
654 "CSIZE was not CS5-CS8, using default of 8\n");
655 last_lcr |= MCT_U232_DATA_BITS_8;
656 break;
657 }
658
659 termios->c_cflag &= ~CMSPAR;
660
661 /* set the number of stop bits */
662 last_lcr |= (cflag & CSTOPB) ?
663 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
664
665 mct_u232_set_line_ctrl(port, last_lcr);
666
667 /* save off the modified port settings */
668 spin_lock_irqsave(&priv->lock, flags);
669 priv->control_state = control_state;
670 priv->last_lcr = last_lcr;
671 spin_unlock_irqrestore(&priv->lock, flags);
672} /* mct_u232_set_termios */
673
674static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
675{
676 struct usb_serial_port *port = tty->driver_data;
677 struct mct_u232_private *priv = usb_get_serial_port_data(port);
678 unsigned char lcr;
679 unsigned long flags;
680
681 spin_lock_irqsave(&priv->lock, flags);
682 lcr = priv->last_lcr;
683
684 if (break_state)
685 lcr |= MCT_U232_SET_BREAK;
686 spin_unlock_irqrestore(&priv->lock, flags);
687
688 mct_u232_set_line_ctrl(port, lcr);
689} /* mct_u232_break_ctl */
690
691
692static int mct_u232_tiocmget(struct tty_struct *tty)
693{
694 struct usb_serial_port *port = tty->driver_data;
695 struct mct_u232_private *priv = usb_get_serial_port_data(port);
696 unsigned int control_state;
697 unsigned long flags;
698
699 spin_lock_irqsave(&priv->lock, flags);
700 control_state = priv->control_state;
701 spin_unlock_irqrestore(&priv->lock, flags);
702
703 return control_state;
704}
705
706static int mct_u232_tiocmset(struct tty_struct *tty,
707 unsigned int set, unsigned int clear)
708{
709 struct usb_serial_port *port = tty->driver_data;
710 struct mct_u232_private *priv = usb_get_serial_port_data(port);
711 unsigned int control_state;
712 unsigned long flags;
713
714 spin_lock_irqsave(&priv->lock, flags);
715 control_state = priv->control_state;
716
717 if (set & TIOCM_RTS)
718 control_state |= TIOCM_RTS;
719 if (set & TIOCM_DTR)
720 control_state |= TIOCM_DTR;
721 if (clear & TIOCM_RTS)
722 control_state &= ~TIOCM_RTS;
723 if (clear & TIOCM_DTR)
724 control_state &= ~TIOCM_DTR;
725
726 priv->control_state = control_state;
727 spin_unlock_irqrestore(&priv->lock, flags);
728 return mct_u232_set_modem_ctrl(port, control_state);
729}
730
731static void mct_u232_throttle(struct tty_struct *tty)
732{
733 struct usb_serial_port *port = tty->driver_data;
734 struct mct_u232_private *priv = usb_get_serial_port_data(port);
735 unsigned int control_state;
736
737 spin_lock_irq(&priv->lock);
738 priv->rx_flags |= THROTTLED;
739 if (C_CRTSCTS(tty)) {
740 priv->control_state &= ~TIOCM_RTS;
741 control_state = priv->control_state;
742 spin_unlock_irq(&priv->lock);
743 mct_u232_set_modem_ctrl(port, control_state);
744 } else {
745 spin_unlock_irq(&priv->lock);
746 }
747}
748
749static void mct_u232_unthrottle(struct tty_struct *tty)
750{
751 struct usb_serial_port *port = tty->driver_data;
752 struct mct_u232_private *priv = usb_get_serial_port_data(port);
753 unsigned int control_state;
754
755 spin_lock_irq(&priv->lock);
756 if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
757 priv->rx_flags &= ~THROTTLED;
758 priv->control_state |= TIOCM_RTS;
759 control_state = priv->control_state;
760 spin_unlock_irq(&priv->lock);
761 mct_u232_set_modem_ctrl(port, control_state);
762 } else {
763 spin_unlock_irq(&priv->lock);
764 }
765}
766
767module_usb_serial_driver(serial_drivers, id_table);
768
769MODULE_AUTHOR(DRIVER_AUTHOR);
770MODULE_DESCRIPTION(DRIVER_DESC);
771MODULE_LICENSE("GPL");