1/*
   2 * MUSB OTG driver peripheral support
   3 *
   4 * Copyright 2005 Mentor Graphics Corporation
   5 * Copyright (C) 2005-2006 by Texas Instruments
   6 * Copyright (C) 2006-2007 Nokia Corporation
   7 * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License
  11 * version 2 as published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  21 * 02110-1301 USA
  22 *
  23 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
  24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  26 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33 *
  34 */
  35
  36#include <linux/kernel.h>
  37#include <linux/list.h>
  38#include <linux/timer.h>
  39#include <linux/module.h>
  40#include <linux/smp.h>
  41#include <linux/spinlock.h>
  42#include <linux/delay.h>
  43#include <linux/moduleparam.h>
  44#include <linux/stat.h>
  45#include <linux/dma-mapping.h>
  46#include <linux/slab.h>
  47
  48#include "musb_core.h"
  49
  50
  51/* MUSB PERIPHERAL status 3-mar-2006:
  52 *
  53 * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
  54 *   Minor glitches:
  55 *
  56 *     + remote wakeup to Linux hosts work, but saw USBCV failures;
  57 *       in one test run (operator error?)
  58 *     + endpoint halt tests -- in both usbtest and usbcv -- seem
  59 *       to break when dma is enabled ... is something wrongly
  60 *       clearing SENDSTALL?
  61 *
  62 * - Mass storage behaved ok when last tested.  Network traffic patterns
  63 *   (with lots of short transfers etc) need retesting; they turn up the
  64 *   worst cases of the DMA, since short packets are typical but are not
  65 *   required.
  66 *
  67 * - TX/IN
  68 *     + both pio and dma behave in with network and g_zero tests
  69 *     + no cppi throughput issues other than no-hw-queueing
  70 *     + failed with FLAT_REG (DaVinci)
  71 *     + seems to behave with double buffering, PIO -and- CPPI
  72 *     + with gadgetfs + AIO, requests got lost?
  73 *
  74 * - RX/OUT
  75 *     + both pio and dma behave in with network and g_zero tests
  76 *     + dma is slow in typical case (short_not_ok is clear)
  77 *     + double buffering ok with PIO
  78 *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
  79 *     + request lossage observed with gadgetfs
  80 *
  81 * - ISO not tested ... might work, but only weakly isochronous
  82 *
  83 * - Gadget driver disabling of softconnect during bind() is ignored; so
  84 *   drivers can't hold off host requests until userspace is ready.
  85 *   (Workaround:  they can turn it off later.)
  86 *
  87 * - PORTABILITY (assumes PIO works):
  88 *     + DaVinci, basically works with cppi dma
  89 *     + OMAP 2430, ditto with mentor dma
  90 *     + TUSB 6010, platform-specific dma in the works
  91 */
  92
  93/* ----------------------------------------------------------------------- */
  94
  95#define is_buffer_mapped(req) (is_dma_capable() && \
  96					(req->map_state != UN_MAPPED))
  97
  98/* Maps the buffer to dma  */
  99
 100static inline void map_dma_buffer(struct musb_request *request,
 101			struct musb *musb, struct musb_ep *musb_ep)
 102{
 103	int compatible = true;
 104	struct dma_controller *dma = musb->dma_controller;
 105
 106	request->map_state = UN_MAPPED;
 107
 108	if (!is_dma_capable() || !musb_ep->dma)
 109		return;
 110
 111	/* Check if DMA engine can handle this request.
 112	 * DMA code must reject the USB request explicitly.
 113	 * Default behaviour is to map the request.
 114	 */
 115	if (dma->is_compatible)
 116		compatible = dma->is_compatible(musb_ep->dma,
 117				musb_ep->packet_sz, request->request.buf,
 118				request->request.length);
 119	if (!compatible)
 120		return;
 121
 122	if (request->request.dma == DMA_ADDR_INVALID) {
 123		request->request.dma = dma_map_single(
 
 
 
 124				musb->controller,
 125				request->request.buf,
 126				request->request.length,
 127				request->tx
 128					? DMA_TO_DEVICE
 129					: DMA_FROM_DEVICE);
 
 
 
 
 
 130		request->map_state = MUSB_MAPPED;
 131	} else {
 132		dma_sync_single_for_device(musb->controller,
 133			request->request.dma,
 134			request->request.length,
 135			request->tx
 136				? DMA_TO_DEVICE
 137				: DMA_FROM_DEVICE);
 138		request->map_state = PRE_MAPPED;
 139	}
 140}
 141
 142/* Unmap the buffer from dma and maps it back to cpu */
 143static inline void unmap_dma_buffer(struct musb_request *request,
 144				struct musb *musb)
 145{
 146	if (!is_buffer_mapped(request))
 
 
 147		return;
 148
 149	if (request->request.dma == DMA_ADDR_INVALID) {
 150		dev_vdbg(musb->controller,
 151				"not unmapping a never mapped buffer\n");
 152		return;
 153	}
 154	if (request->map_state == MUSB_MAPPED) {
 155		dma_unmap_single(musb->controller,
 156			request->request.dma,
 157			request->request.length,
 158			request->tx
 159				? DMA_TO_DEVICE
 160				: DMA_FROM_DEVICE);
 161		request->request.dma = DMA_ADDR_INVALID;
 162	} else { /* PRE_MAPPED */
 163		dma_sync_single_for_cpu(musb->controller,
 164			request->request.dma,
 165			request->request.length,
 166			request->tx
 167				? DMA_TO_DEVICE
 168				: DMA_FROM_DEVICE);
 169	}
 170	request->map_state = UN_MAPPED;
 171}
 172
 173/*
 174 * Immediately complete a request.
 175 *
 176 * @param request the request to complete
 177 * @param status the status to complete the request with
 178 * Context: controller locked, IRQs blocked.
 179 */
 180void musb_g_giveback(
 181	struct musb_ep		*ep,
 182	struct usb_request	*request,
 183	int			status)
 184__releases(ep->musb->lock)
 185__acquires(ep->musb->lock)
 186{
 187	struct musb_request	*req;
 188	struct musb		*musb;
 189	int			busy = ep->busy;
 190
 191	req = to_musb_request(request);
 192
 193	list_del(&req->list);
 194	if (req->request.status == -EINPROGRESS)
 195		req->request.status = status;
 196	musb = req->musb;
 197
 198	ep->busy = 1;
 199	spin_unlock(&musb->lock);
 200	unmap_dma_buffer(req, musb);
 
 
 
 201	if (request->status == 0)
 202		dev_dbg(musb->controller, "%s done request %p,  %d/%d\n",
 203				ep->end_point.name, request,
 204				req->request.actual, req->request.length);
 205	else
 206		dev_dbg(musb->controller, "%s request %p, %d/%d fault %d\n",
 207				ep->end_point.name, request,
 208				req->request.actual, req->request.length,
 209				request->status);
 210	req->request.complete(&req->ep->end_point, &req->request);
 211	spin_lock(&musb->lock);
 212	ep->busy = busy;
 213}
 214
 215/* ----------------------------------------------------------------------- */
 216
 217/*
 218 * Abort requests queued to an endpoint using the status. Synchronous.
 219 * caller locked controller and blocked irqs, and selected this ep.
 220 */
 221static void nuke(struct musb_ep *ep, const int status)
 222{
 223	struct musb		*musb = ep->musb;
 224	struct musb_request	*req = NULL;
 225	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
 226
 227	ep->busy = 1;
 228
 229	if (is_dma_capable() && ep->dma) {
 230		struct dma_controller	*c = ep->musb->dma_controller;
 231		int value;
 232
 233		if (ep->is_in) {
 234			/*
 235			 * The programming guide says that we must not clear
 236			 * the DMAMODE bit before DMAENAB, so we only
 237			 * clear it in the second write...
 238			 */
 239			musb_writew(epio, MUSB_TXCSR,
 240				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
 241			musb_writew(epio, MUSB_TXCSR,
 242					0 | MUSB_TXCSR_FLUSHFIFO);
 243		} else {
 244			musb_writew(epio, MUSB_RXCSR,
 245					0 | MUSB_RXCSR_FLUSHFIFO);
 246			musb_writew(epio, MUSB_RXCSR,
 247					0 | MUSB_RXCSR_FLUSHFIFO);
 248		}
 249
 250		value = c->channel_abort(ep->dma);
 251		dev_dbg(musb->controller, "%s: abort DMA --> %d\n",
 252				ep->name, value);
 253		c->channel_release(ep->dma);
 254		ep->dma = NULL;
 255	}
 256
 257	while (!list_empty(&ep->req_list)) {
 258		req = list_first_entry(&ep->req_list, struct musb_request, list);
 259		musb_g_giveback(ep, &req->request, status);
 260	}
 261}
 262
 263/* ----------------------------------------------------------------------- */
 264
 265/* Data transfers - pure PIO, pure DMA, or mixed mode */
 266
 267/*
 268 * This assumes the separate CPPI engine is responding to DMA requests
 269 * from the usb core ... sequenced a bit differently from mentor dma.
 270 */
 271
 272static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
 273{
 274	if (can_bulk_split(musb, ep->type))
 275		return ep->hw_ep->max_packet_sz_tx;
 276	else
 277		return ep->packet_sz;
 278}
 279
 280
 281#ifdef CONFIG_USB_INVENTRA_DMA
 282
 283/* Peripheral tx (IN) using Mentor DMA works as follows:
 284	Only mode 0 is used for transfers <= wPktSize,
 285	mode 1 is used for larger transfers,
 286
 287	One of the following happens:
 288	- Host sends IN token which causes an endpoint interrupt
 289		-> TxAvail
 290			-> if DMA is currently busy, exit.
 291			-> if queue is non-empty, txstate().
 292
 293	- Request is queued by the gadget driver.
 294		-> if queue was previously empty, txstate()
 295
 296	txstate()
 297		-> start
 298		  /\	-> setup DMA
 299		  |     (data is transferred to the FIFO, then sent out when
 300		  |	IN token(s) are recd from Host.
 301		  |		-> DMA interrupt on completion
 302		  |		   calls TxAvail.
 303		  |		      -> stop DMA, ~DMAENAB,
 304		  |		      -> set TxPktRdy for last short pkt or zlp
 305		  |		      -> Complete Request
 306		  |		      -> Continue next request (call txstate)
 307		  |___________________________________|
 308
 309 * Non-Mentor DMA engines can of course work differently, such as by
 310 * upleveling from irq-per-packet to irq-per-buffer.
 311 */
 312
 313#endif
 314
 315/*
 316 * An endpoint is transmitting data. This can be called either from
 317 * the IRQ routine or from ep.queue() to kickstart a request on an
 318 * endpoint.
 319 *
 320 * Context: controller locked, IRQs blocked, endpoint selected
 321 */
 322static void txstate(struct musb *musb, struct musb_request *req)
 323{
 324	u8			epnum = req->epnum;
 325	struct musb_ep		*musb_ep;
 326	void __iomem		*epio = musb->endpoints[epnum].regs;
 327	struct usb_request	*request;
 328	u16			fifo_count = 0, csr;
 329	int			use_dma = 0;
 330
 331	musb_ep = req->ep;
 332
 
 
 
 
 
 
 
 333	/* we shouldn't get here while DMA is active ... but we do ... */
 334	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
 335		dev_dbg(musb->controller, "dma pending...\n");
 336		return;
 337	}
 338
 339	/* read TXCSR before */
 340	csr = musb_readw(epio, MUSB_TXCSR);
 341
 342	request = &req->request;
 343	fifo_count = min(max_ep_writesize(musb, musb_ep),
 344			(int)(request->length - request->actual));
 345
 346	if (csr & MUSB_TXCSR_TXPKTRDY) {
 347		dev_dbg(musb->controller, "%s old packet still ready , txcsr %03x\n",
 348				musb_ep->end_point.name, csr);
 349		return;
 350	}
 351
 352	if (csr & MUSB_TXCSR_P_SENDSTALL) {
 353		dev_dbg(musb->controller, "%s stalling, txcsr %03x\n",
 354				musb_ep->end_point.name, csr);
 355		return;
 356	}
 357
 358	dev_dbg(musb->controller, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
 359			epnum, musb_ep->packet_sz, fifo_count,
 360			csr);
 361
 362#ifndef	CONFIG_MUSB_PIO_ONLY
 363	if (is_buffer_mapped(req)) {
 364		struct dma_controller	*c = musb->dma_controller;
 365		size_t request_size;
 366
 367		/* setup DMA, then program endpoint CSR */
 368		request_size = min_t(size_t, request->length - request->actual,
 369					musb_ep->dma->max_len);
 370
 371		use_dma = (request->dma != DMA_ADDR_INVALID);
 372
 373		/* MUSB_TXCSR_P_ISO is still set correctly */
 374
 375#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
 376		{
 377			if (request_size < musb_ep->packet_sz)
 378				musb_ep->dma->desired_mode = 0;
 379			else
 380				musb_ep->dma->desired_mode = 1;
 381
 382			use_dma = use_dma && c->channel_program(
 383					musb_ep->dma, musb_ep->packet_sz,
 384					musb_ep->dma->desired_mode,
 385					request->dma + request->actual, request_size);
 386			if (use_dma) {
 387				if (musb_ep->dma->desired_mode == 0) {
 388					/*
 389					 * We must not clear the DMAMODE bit
 390					 * before the DMAENAB bit -- and the
 391					 * latter doesn't always get cleared
 392					 * before we get here...
 393					 */
 394					csr &= ~(MUSB_TXCSR_AUTOSET
 395						| MUSB_TXCSR_DMAENAB);
 396					musb_writew(epio, MUSB_TXCSR, csr
 397						| MUSB_TXCSR_P_WZC_BITS);
 398					csr &= ~MUSB_TXCSR_DMAMODE;
 399					csr |= (MUSB_TXCSR_DMAENAB |
 400							MUSB_TXCSR_MODE);
 401					/* against programming guide */
 402				} else {
 403					csr |= (MUSB_TXCSR_DMAENAB
 404							| MUSB_TXCSR_DMAMODE
 405							| MUSB_TXCSR_MODE);
 406					if (!musb_ep->hb_mult)
 
 
 
 
 
 
 
 
 
 
 
 
 407						csr |= MUSB_TXCSR_AUTOSET;
 408				}
 409				csr &= ~MUSB_TXCSR_P_UNDERRUN;
 410
 411				musb_writew(epio, MUSB_TXCSR, csr);
 412			}
 413		}
 414
 415#elif defined(CONFIG_USB_TI_CPPI_DMA)
 416		/* program endpoint CSR first, then setup DMA */
 417		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 418		csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
 419		       MUSB_TXCSR_MODE;
 420		musb_writew(epio, MUSB_TXCSR,
 421			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
 422				| csr);
 423
 424		/* ensure writebuffer is empty */
 425		csr = musb_readw(epio, MUSB_TXCSR);
 426
 427		/* NOTE host side sets DMAENAB later than this; both are
 428		 * OK since the transfer dma glue (between CPPI and Mentor
 429		 * fifos) just tells CPPI it could start.  Data only moves
 430		 * to the USB TX fifo when both fifos are ready.
 431		 */
 432
 433		/* "mode" is irrelevant here; handle terminating ZLPs like
 434		 * PIO does, since the hardware RNDIS mode seems unreliable
 435		 * except for the last-packet-is-already-short case.
 436		 */
 437		use_dma = use_dma && c->channel_program(
 438				musb_ep->dma, musb_ep->packet_sz,
 439				0,
 440				request->dma + request->actual,
 441				request_size);
 442		if (!use_dma) {
 443			c->channel_release(musb_ep->dma);
 444			musb_ep->dma = NULL;
 445			csr &= ~MUSB_TXCSR_DMAENAB;
 446			musb_writew(epio, MUSB_TXCSR, csr);
 447			/* invariant: prequest->buf is non-null */
 448		}
 449#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
 450		use_dma = use_dma && c->channel_program(
 451				musb_ep->dma, musb_ep->packet_sz,
 452				request->zero,
 453				request->dma + request->actual,
 454				request_size);
 455#endif
 
 
 
 
 
 
 
 
 456	}
 457#endif
 458
 459	if (!use_dma) {
 460		/*
 461		 * Unmap the dma buffer back to cpu if dma channel
 462		 * programming fails
 463		 */
 464		unmap_dma_buffer(req, musb);
 465
 466		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 467				(u8 *) (request->buf + request->actual));
 468		request->actual += fifo_count;
 469		csr |= MUSB_TXCSR_TXPKTRDY;
 470		csr &= ~MUSB_TXCSR_P_UNDERRUN;
 471		musb_writew(epio, MUSB_TXCSR, csr);
 472	}
 473
 474	/* host may already have the data when this message shows... */
 475	dev_dbg(musb->controller, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
 476			musb_ep->end_point.name, use_dma ? "dma" : "pio",
 477			request->actual, request->length,
 478			musb_readw(epio, MUSB_TXCSR),
 479			fifo_count,
 480			musb_readw(epio, MUSB_TXMAXP));
 481}
 482
 483/*
 484 * FIFO state update (e.g. data ready).
 485 * Called from IRQ,  with controller locked.
 486 */
 487void musb_g_tx(struct musb *musb, u8 epnum)
 488{
 489	u16			csr;
 490	struct musb_request	*req;
 491	struct usb_request	*request;
 492	u8 __iomem		*mbase = musb->mregs;
 493	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
 494	void __iomem		*epio = musb->endpoints[epnum].regs;
 495	struct dma_channel	*dma;
 496
 497	musb_ep_select(mbase, epnum);
 498	req = next_request(musb_ep);
 499	request = &req->request;
 500
 501	csr = musb_readw(epio, MUSB_TXCSR);
 502	dev_dbg(musb->controller, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
 503
 504	dma = is_dma_capable() ? musb_ep->dma : NULL;
 505
 506	/*
 507	 * REVISIT: for high bandwidth, MUSB_TXCSR_P_INCOMPTX
 508	 * probably rates reporting as a host error.
 509	 */
 510	if (csr & MUSB_TXCSR_P_SENTSTALL) {
 511		csr |=	MUSB_TXCSR_P_WZC_BITS;
 512		csr &= ~MUSB_TXCSR_P_SENTSTALL;
 513		musb_writew(epio, MUSB_TXCSR, csr);
 514		return;
 515	}
 516
 517	if (csr & MUSB_TXCSR_P_UNDERRUN) {
 518		/* We NAKed, no big deal... little reason to care. */
 519		csr |=	 MUSB_TXCSR_P_WZC_BITS;
 520		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 521		musb_writew(epio, MUSB_TXCSR, csr);
 522		dev_vdbg(musb->controller, "underrun on ep%d, req %p\n",
 523				epnum, request);
 524	}
 525
 526	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 527		/*
 528		 * SHOULD NOT HAPPEN... has with CPPI though, after
 529		 * changing SENDSTALL (and other cases); harmless?
 530		 */
 531		dev_dbg(musb->controller, "%s dma still busy?\n", musb_ep->end_point.name);
 532		return;
 533	}
 534
 535	if (request) {
 536		u8	is_dma = 0;
 537
 538		if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
 539			is_dma = 1;
 540			csr |= MUSB_TXCSR_P_WZC_BITS;
 541			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
 542				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
 543			musb_writew(epio, MUSB_TXCSR, csr);
 544			/* Ensure writebuffer is empty. */
 545			csr = musb_readw(epio, MUSB_TXCSR);
 546			request->actual += musb_ep->dma->actual_len;
 547			dev_dbg(musb->controller, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
 548				epnum, csr, musb_ep->dma->actual_len, request);
 549		}
 550
 551		/*
 552		 * First, maybe a terminating short packet. Some DMA
 553		 * engines might handle this by themselves.
 554		 */
 555		if ((request->zero && request->length
 556			&& (request->length % musb_ep->packet_sz == 0)
 557			&& (request->actual == request->length))
 558#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
 559			|| (is_dma && (!dma->desired_mode ||
 560				(request->actual &
 561					(musb_ep->packet_sz - 1))))
 562#endif
 563		) {
 564			/*
 565			 * On DMA completion, FIFO may not be
 566			 * available yet...
 567			 */
 568			if (csr & MUSB_TXCSR_TXPKTRDY)
 569				return;
 570
 571			dev_dbg(musb->controller, "sending zero pkt\n");
 572			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
 573					| MUSB_TXCSR_TXPKTRDY);
 574			request->zero = 0;
 575		}
 576
 577		if (request->actual == request->length) {
 578			musb_g_giveback(musb_ep, request, 0);
 
 
 
 
 
 
 
 
 
 579			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 580			if (!req) {
 581				dev_dbg(musb->controller, "%s idle now\n",
 582					musb_ep->end_point.name);
 583				return;
 584			}
 585		}
 586
 587		txstate(musb, req);
 588	}
 589}
 590
 591/* ------------------------------------------------------------ */
 592
 593#ifdef CONFIG_USB_INVENTRA_DMA
 594
 595/* Peripheral rx (OUT) using Mentor DMA works as follows:
 596	- Only mode 0 is used.
 597
 598	- Request is queued by the gadget class driver.
 599		-> if queue was previously empty, rxstate()
 600
 601	- Host sends OUT token which causes an endpoint interrupt
 602	  /\      -> RxReady
 603	  |	      -> if request queued, call rxstate
 604	  |		/\	-> setup DMA
 605	  |		|	     -> DMA interrupt on completion
 606	  |		|		-> RxReady
 607	  |		|		      -> stop DMA
 608	  |		|		      -> ack the read
 609	  |		|		      -> if data recd = max expected
 610	  |		|				by the request, or host
 611	  |		|				sent a short packet,
 612	  |		|				complete the request,
 613	  |		|				and start the next one.
 614	  |		|_____________________________________|
 615	  |					 else just wait for the host
 616	  |					    to send the next OUT token.
 617	  |__________________________________________________|
 618
 619 * Non-Mentor DMA engines can of course work differently.
 620 */
 621
 622#endif
 623
 624/*
 625 * Context: controller locked, IRQs blocked, endpoint selected
 626 */
 627static void rxstate(struct musb *musb, struct musb_request *req)
 628{
 629	const u8		epnum = req->epnum;
 630	struct usb_request	*request = &req->request;
 631	struct musb_ep		*musb_ep;
 632	void __iomem		*epio = musb->endpoints[epnum].regs;
 633	unsigned		fifo_count = 0;
 634	u16			len;
 635	u16			csr = musb_readw(epio, MUSB_RXCSR);
 636	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
 
 637
 638	if (hw_ep->is_shared_fifo)
 639		musb_ep = &hw_ep->ep_in;
 640	else
 641		musb_ep = &hw_ep->ep_out;
 642
 643	len = musb_ep->packet_sz;
 
 
 
 
 
 
 
 644
 645	/* We shouldn't get here while DMA is active, but we do... */
 646	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
 647		dev_dbg(musb->controller, "DMA pending...\n");
 648		return;
 649	}
 650
 651	if (csr & MUSB_RXCSR_P_SENDSTALL) {
 652		dev_dbg(musb->controller, "%s stalling, RXCSR %04x\n",
 653		    musb_ep->end_point.name, csr);
 654		return;
 655	}
 656
 657	if (is_cppi_enabled() && is_buffer_mapped(req)) {
 658		struct dma_controller	*c = musb->dma_controller;
 659		struct dma_channel	*channel = musb_ep->dma;
 660
 661		/* NOTE:  CPPI won't actually stop advancing the DMA
 662		 * queue after short packet transfers, so this is almost
 663		 * always going to run as IRQ-per-packet DMA so that
 664		 * faults will be handled correctly.
 665		 */
 666		if (c->channel_program(channel,
 667				musb_ep->packet_sz,
 668				!request->short_not_ok,
 669				request->dma + request->actual,
 670				request->length - request->actual)) {
 671
 672			/* make sure that if an rxpkt arrived after the irq,
 673			 * the cppi engine will be ready to take it as soon
 674			 * as DMA is enabled
 675			 */
 676			csr &= ~(MUSB_RXCSR_AUTOCLEAR
 677					| MUSB_RXCSR_DMAMODE);
 678			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
 679			musb_writew(epio, MUSB_RXCSR, csr);
 680			return;
 681		}
 682	}
 683
 684	if (csr & MUSB_RXCSR_RXPKTRDY) {
 685		len = musb_readw(epio, MUSB_RXCOUNT);
 
 
 
 
 
 
 
 
 
 
 
 
 686		if (request->actual < request->length) {
 687#ifdef CONFIG_USB_INVENTRA_DMA
 688			if (is_buffer_mapped(req)) {
 689				struct dma_controller	*c;
 690				struct dma_channel	*channel;
 691				int			use_dma = 0;
 
 692
 693				c = musb->dma_controller;
 694				channel = musb_ep->dma;
 695
 696	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
 697	 * mode 0 only. So we do not get endpoint interrupts due to DMA
 698	 * completion. We only get interrupts from DMA controller.
 699	 *
 700	 * We could operate in DMA mode 1 if we knew the size of the tranfer
 701	 * in advance. For mass storage class, request->length = what the host
 702	 * sends, so that'd work.  But for pretty much everything else,
 703	 * request->length is routinely more than what the host sends. For
 704	 * most these gadgets, end of is signified either by a short packet,
 705	 * or filling the last byte of the buffer.  (Sending extra data in
 706	 * that last pckate should trigger an overflow fault.)  But in mode 1,
 707	 * we don't get DMA completion interrrupt for short packets.
 708	 *
 709	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
 710	 * to get endpoint interrupt on every DMA req, but that didn't seem
 711	 * to work reliably.
 712	 *
 713	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
 714	 * then becomes usable as a runtime "use mode 1" hint...
 715	 */
 716
 717				csr |= MUSB_RXCSR_DMAENAB;
 718#ifdef USE_MODE1
 719				csr |= MUSB_RXCSR_AUTOCLEAR;
 720				/* csr |= MUSB_RXCSR_DMAMODE; */
 721
 722				/* this special sequence (enabling and then
 723				 * disabling MUSB_RXCSR_DMAMODE) is required
 724				 * to get DMAReq to activate
 725				 */
 726				musb_writew(epio, MUSB_RXCSR,
 727					csr | MUSB_RXCSR_DMAMODE);
 728#else
 729				if (!musb_ep->hb_mult &&
 730					musb_ep->hw_ep->rx_double_buffered)
 731					csr |= MUSB_RXCSR_AUTOCLEAR;
 732#endif
 733				musb_writew(epio, MUSB_RXCSR, csr);
 
 734
 735				if (request->actual < request->length) {
 736					int transfer_size = 0;
 737#ifdef USE_MODE1
 738					transfer_size = min(request->length - request->actual,
 
 
 
 
 
 
 
 
 739							channel->max_len);
 740#else
 741					transfer_size = min(request->length - request->actual,
 742							(unsigned)len);
 743#endif
 744					if (transfer_size <= musb_ep->packet_sz)
 745						musb_ep->dma->desired_mode = 0;
 746					else
 747						musb_ep->dma->desired_mode = 1;
 748
 749					use_dma = c->channel_program(
 750							channel,
 751							musb_ep->packet_sz,
 752							channel->desired_mode,
 753							request->dma
 754							+ request->actual,
 755							transfer_size);
 756				}
 757
 
 
 
 
 
 
 
 
 758				if (use_dma)
 759					return;
 760			}
 761#elif defined(CONFIG_USB_UX500_DMA)
 762			if ((is_buffer_mapped(req)) &&
 763				(request->actual < request->length)) {
 764
 765				struct dma_controller *c;
 766				struct dma_channel *channel;
 767				int transfer_size = 0;
 768
 769				c = musb->dma_controller;
 770				channel = musb_ep->dma;
 771
 772				/* In case first packet is short */
 773				if (len < musb_ep->packet_sz)
 774					transfer_size = len;
 775				else if (request->short_not_ok)
 776					transfer_size =	min(request->length -
 
 777							request->actual,
 778							channel->max_len);
 779				else
 780					transfer_size = min(request->length -
 
 781							request->actual,
 782							(unsigned)len);
 783
 784				csr &= ~MUSB_RXCSR_DMAMODE;
 785				csr |= (MUSB_RXCSR_DMAENAB |
 786					MUSB_RXCSR_AUTOCLEAR);
 787
 788				musb_writew(epio, MUSB_RXCSR, csr);
 789
 790				if (transfer_size <= musb_ep->packet_sz) {
 791					musb_ep->dma->desired_mode = 0;
 792				} else {
 793					musb_ep->dma->desired_mode = 1;
 794					/* Mode must be set after DMAENAB */
 795					csr |= MUSB_RXCSR_DMAMODE;
 796					musb_writew(epio, MUSB_RXCSR, csr);
 797				}
 798
 799				if (c->channel_program(channel,
 800							musb_ep->packet_sz,
 801							channel->desired_mode,
 802							request->dma
 803							+ request->actual,
 804							transfer_size))
 805
 806					return;
 807			}
 808#endif	/* Mentor's DMA */
 809
 810			fifo_count = request->length - request->actual;
 811			dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
 812					musb_ep->end_point.name,
 813					len, fifo_count,
 814					musb_ep->packet_sz);
 815
 816			fifo_count = min_t(unsigned, len, fifo_count);
 817
 818#ifdef	CONFIG_USB_TUSB_OMAP_DMA
 819			if (tusb_dma_omap() && is_buffer_mapped(req)) {
 820				struct dma_controller *c = musb->dma_controller;
 821				struct dma_channel *channel = musb_ep->dma;
 822				u32 dma_addr = request->dma + request->actual;
 823				int ret;
 824
 825				ret = c->channel_program(channel,
 826						musb_ep->packet_sz,
 827						channel->desired_mode,
 828						dma_addr,
 829						fifo_count);
 830				if (ret)
 831					return;
 832			}
 833#endif
 834			/*
 835			 * Unmap the dma buffer back to cpu if dma channel
 836			 * programming fails. This buffer is mapped if the
 837			 * channel allocation is successful
 838			 */
 839			 if (is_buffer_mapped(req)) {
 840				unmap_dma_buffer(req, musb);
 841
 842				/*
 843				 * Clear DMAENAB and AUTOCLEAR for the
 844				 * PIO mode transfer
 845				 */
 846				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
 847				musb_writew(epio, MUSB_RXCSR, csr);
 848			}
 849
 850			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 851					(request->buf + request->actual));
 852			request->actual += fifo_count;
 853
 854			/* REVISIT if we left anything in the fifo, flush
 855			 * it and report -EOVERFLOW
 856			 */
 857
 858			/* ack the read! */
 859			csr |= MUSB_RXCSR_P_WZC_BITS;
 860			csr &= ~MUSB_RXCSR_RXPKTRDY;
 861			musb_writew(epio, MUSB_RXCSR, csr);
 862		}
 863	}
 864
 865	/* reach the end or short packet detected */
 866	if (request->actual == request->length || len < musb_ep->packet_sz)
 
 867		musb_g_giveback(musb_ep, request, 0);
 868}
 869
 870/*
 871 * Data ready for a request; called from IRQ
 872 */
 873void musb_g_rx(struct musb *musb, u8 epnum)
 874{
 875	u16			csr;
 876	struct musb_request	*req;
 877	struct usb_request	*request;
 878	void __iomem		*mbase = musb->mregs;
 879	struct musb_ep		*musb_ep;
 880	void __iomem		*epio = musb->endpoints[epnum].regs;
 881	struct dma_channel	*dma;
 882	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
 883
 884	if (hw_ep->is_shared_fifo)
 885		musb_ep = &hw_ep->ep_in;
 886	else
 887		musb_ep = &hw_ep->ep_out;
 888
 889	musb_ep_select(mbase, epnum);
 890
 891	req = next_request(musb_ep);
 892	if (!req)
 893		return;
 894
 895	request = &req->request;
 896
 897	csr = musb_readw(epio, MUSB_RXCSR);
 898	dma = is_dma_capable() ? musb_ep->dma : NULL;
 899
 900	dev_dbg(musb->controller, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
 901			csr, dma ? " (dma)" : "", request);
 902
 903	if (csr & MUSB_RXCSR_P_SENTSTALL) {
 904		csr |= MUSB_RXCSR_P_WZC_BITS;
 905		csr &= ~MUSB_RXCSR_P_SENTSTALL;
 906		musb_writew(epio, MUSB_RXCSR, csr);
 907		return;
 908	}
 909
 910	if (csr & MUSB_RXCSR_P_OVERRUN) {
 911		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
 912		csr &= ~MUSB_RXCSR_P_OVERRUN;
 913		musb_writew(epio, MUSB_RXCSR, csr);
 914
 915		dev_dbg(musb->controller, "%s iso overrun on %p\n", musb_ep->name, request);
 916		if (request->status == -EINPROGRESS)
 917			request->status = -EOVERFLOW;
 918	}
 919	if (csr & MUSB_RXCSR_INCOMPRX) {
 920		/* REVISIT not necessarily an error */
 921		dev_dbg(musb->controller, "%s, incomprx\n", musb_ep->end_point.name);
 922	}
 923
 924	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 925		/* "should not happen"; likely RXPKTRDY pending for DMA */
 926		dev_dbg(musb->controller, "%s busy, csr %04x\n",
 927			musb_ep->end_point.name, csr);
 928		return;
 929	}
 930
 931	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
 932		csr &= ~(MUSB_RXCSR_AUTOCLEAR
 933				| MUSB_RXCSR_DMAENAB
 934				| MUSB_RXCSR_DMAMODE);
 935		musb_writew(epio, MUSB_RXCSR,
 936			MUSB_RXCSR_P_WZC_BITS | csr);
 937
 938		request->actual += musb_ep->dma->actual_len;
 939
 940		dev_dbg(musb->controller, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
 941			epnum, csr,
 942			musb_readw(epio, MUSB_RXCSR),
 943			musb_ep->dma->actual_len, request);
 944
 945#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
 946	defined(CONFIG_USB_UX500_DMA)
 947		/* Autoclear doesn't clear RxPktRdy for short packets */
 948		if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
 949				|| (dma->actual_len
 950					& (musb_ep->packet_sz - 1))) {
 951			/* ack the read! */
 952			csr &= ~MUSB_RXCSR_RXPKTRDY;
 953			musb_writew(epio, MUSB_RXCSR, csr);
 954		}
 955
 956		/* incomplete, and not short? wait for next IN packet */
 957		if ((request->actual < request->length)
 958				&& (musb_ep->dma->actual_len
 959					== musb_ep->packet_sz)) {
 960			/* In double buffer case, continue to unload fifo if
 961 			 * there is Rx packet in FIFO.
 962 			 **/
 963			csr = musb_readw(epio, MUSB_RXCSR);
 964			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
 965				hw_ep->rx_double_buffered)
 966				goto exit;
 967			return;
 968		}
 969#endif
 970		musb_g_giveback(musb_ep, request, 0);
 
 
 
 
 
 
 
 
 
 971
 972		req = next_request(musb_ep);
 973		if (!req)
 974			return;
 975	}
 976#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \
 977	defined(CONFIG_USB_UX500_DMA)
 978exit:
 979#endif
 980	/* Analyze request */
 981	rxstate(musb, req);
 982}
 983
 984/* ------------------------------------------------------------ */
 985
 986static int musb_gadget_enable(struct usb_ep *ep,
 987			const struct usb_endpoint_descriptor *desc)
 988{
 989	unsigned long		flags;
 990	struct musb_ep		*musb_ep;
 991	struct musb_hw_ep	*hw_ep;
 992	void __iomem		*regs;
 993	struct musb		*musb;
 994	void __iomem	*mbase;
 995	u8		epnum;
 996	u16		csr;
 997	unsigned	tmp;
 998	int		status = -EINVAL;
 999
1000	if (!ep || !desc)
1001		return -EINVAL;
1002
1003	musb_ep = to_musb_ep(ep);
1004	hw_ep = musb_ep->hw_ep;
1005	regs = hw_ep->regs;
1006	musb = musb_ep->musb;
1007	mbase = musb->mregs;
1008	epnum = musb_ep->current_epnum;
1009
1010	spin_lock_irqsave(&musb->lock, flags);
1011
1012	if (musb_ep->desc) {
1013		status = -EBUSY;
1014		goto fail;
1015	}
1016	musb_ep->type = usb_endpoint_type(desc);
1017
1018	/* check direction and (later) maxpacket size against endpoint */
1019	if (usb_endpoint_num(desc) != epnum)
1020		goto fail;
1021
1022	/* REVISIT this rules out high bandwidth periodic transfers */
1023	tmp = le16_to_cpu(desc->wMaxPacketSize);
1024	if (tmp & ~0x07ff) {
1025		int ok;
1026
1027		if (usb_endpoint_dir_in(desc))
1028			ok = musb->hb_iso_tx;
1029		else
1030			ok = musb->hb_iso_rx;
1031
1032		if (!ok) {
1033			dev_dbg(musb->controller, "no support for high bandwidth ISO\n");
1034			goto fail;
1035		}
1036		musb_ep->hb_mult = (tmp >> 11) & 3;
1037	} else {
1038		musb_ep->hb_mult = 0;
1039	}
1040
1041	musb_ep->packet_sz = tmp & 0x7ff;
1042	tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1);
1043
1044	/* enable the interrupts for the endpoint, set the endpoint
1045	 * packet size (or fail), set the mode, clear the fifo
1046	 */
1047	musb_ep_select(mbase, epnum);
1048	if (usb_endpoint_dir_in(desc)) {
1049		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
1050
1051		if (hw_ep->is_shared_fifo)
1052			musb_ep->is_in = 1;
1053		if (!musb_ep->is_in)
1054			goto fail;
1055
1056		if (tmp > hw_ep->max_packet_sz_tx) {
1057			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
1058			goto fail;
1059		}
1060
1061		int_txe |= (1 << epnum);
1062		musb_writew(mbase, MUSB_INTRTXE, int_txe);
1063
1064		/* REVISIT if can_bulk_split(), use by updating "tmp";
1065		 * likewise high bandwidth periodic tx
1066		 */
1067		/* Set TXMAXP with the FIFO size of the endpoint
1068		 * to disable double buffering mode.
1069		 */
1070		if (musb->double_buffer_not_ok)
1071			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
1072		else
 
 
 
1073			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
1074					| (musb_ep->hb_mult << 11));
 
1075
1076		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
1077		if (musb_readw(regs, MUSB_TXCSR)
1078				& MUSB_TXCSR_FIFONOTEMPTY)
1079			csr |= MUSB_TXCSR_FLUSHFIFO;
1080		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
1081			csr |= MUSB_TXCSR_P_ISO;
1082
1083		/* set twice in case of double buffering */
1084		musb_writew(regs, MUSB_TXCSR, csr);
1085		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
1086		musb_writew(regs, MUSB_TXCSR, csr);
1087
1088	} else {
1089		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
1090
1091		if (hw_ep->is_shared_fifo)
1092			musb_ep->is_in = 0;
1093		if (musb_ep->is_in)
1094			goto fail;
1095
1096		if (tmp > hw_ep->max_packet_sz_rx) {
1097			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
1098			goto fail;
1099		}
1100
1101		int_rxe |= (1 << epnum);
1102		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
1103
1104		/* REVISIT if can_bulk_combine() use by updating "tmp"
1105		 * likewise high bandwidth periodic rx
1106		 */
1107		/* Set RXMAXP with the FIFO size of the endpoint
1108		 * to disable double buffering mode.
1109		 */
1110		if (musb->double_buffer_not_ok)
1111			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
1112		else
1113			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
1114					| (musb_ep->hb_mult << 11));
1115
1116		/* force shared fifo to OUT-only mode */
1117		if (hw_ep->is_shared_fifo) {
1118			csr = musb_readw(regs, MUSB_TXCSR);
1119			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
1120			musb_writew(regs, MUSB_TXCSR, csr);
1121		}
1122
1123		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
1124		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
1125			csr |= MUSB_RXCSR_P_ISO;
1126		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
1127			csr |= MUSB_RXCSR_DISNYET;
1128
1129		/* set twice in case of double buffering */
1130		musb_writew(regs, MUSB_RXCSR, csr);
1131		musb_writew(regs, MUSB_RXCSR, csr);
1132	}
1133
1134	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
1135	 * for some reason you run out of channels here.
1136	 */
1137	if (is_dma_capable() && musb->dma_controller) {
1138		struct dma_controller	*c = musb->dma_controller;
1139
1140		musb_ep->dma = c->channel_alloc(c, hw_ep,
1141				(desc->bEndpointAddress & USB_DIR_IN));
1142	} else
1143		musb_ep->dma = NULL;
1144
1145	musb_ep->desc = desc;
1146	musb_ep->busy = 0;
1147	musb_ep->wedged = 0;
1148	status = 0;
1149
1150	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
1151			musb_driver_name, musb_ep->end_point.name,
1152			({ char *s; switch (musb_ep->type) {
1153			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
1154			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
1155			default:			s = "iso"; break;
1156			}; s; }),
1157			musb_ep->is_in ? "IN" : "OUT",
1158			musb_ep->dma ? "dma, " : "",
1159			musb_ep->packet_sz);
1160
1161	schedule_work(&musb->irq_work);
1162
1163fail:
1164	spin_unlock_irqrestore(&musb->lock, flags);
1165	return status;
1166}
1167
1168/*
1169 * Disable an endpoint flushing all requests queued.
1170 */
1171static int musb_gadget_disable(struct usb_ep *ep)
1172{
1173	unsigned long	flags;
1174	struct musb	*musb;
1175	u8		epnum;
1176	struct musb_ep	*musb_ep;
1177	void __iomem	*epio;
1178	int		status = 0;
1179
1180	musb_ep = to_musb_ep(ep);
1181	musb = musb_ep->musb;
1182	epnum = musb_ep->current_epnum;
1183	epio = musb->endpoints[epnum].regs;
1184
1185	spin_lock_irqsave(&musb->lock, flags);
1186	musb_ep_select(musb->mregs, epnum);
1187
1188	/* zero the endpoint sizes */
1189	if (musb_ep->is_in) {
1190		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
1191		int_txe &= ~(1 << epnum);
1192		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
1193		musb_writew(epio, MUSB_TXMAXP, 0);
1194	} else {
1195		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
1196		int_rxe &= ~(1 << epnum);
1197		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
1198		musb_writew(epio, MUSB_RXMAXP, 0);
1199	}
1200
1201	musb_ep->desc = NULL;
 
1202
1203	/* abort all pending DMA and requests */
1204	nuke(musb_ep, -ESHUTDOWN);
1205
1206	schedule_work(&musb->irq_work);
1207
1208	spin_unlock_irqrestore(&(musb->lock), flags);
1209
1210	dev_dbg(musb->controller, "%s\n", musb_ep->end_point.name);
1211
1212	return status;
1213}
1214
1215/*
1216 * Allocate a request for an endpoint.
1217 * Reused by ep0 code.
1218 */
1219struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1220{
1221	struct musb_ep		*musb_ep = to_musb_ep(ep);
1222	struct musb		*musb = musb_ep->musb;
1223	struct musb_request	*request = NULL;
1224
1225	request = kzalloc(sizeof *request, gfp_flags);
1226	if (!request) {
1227		dev_dbg(musb->controller, "not enough memory\n");
1228		return NULL;
1229	}
1230
1231	request->request.dma = DMA_ADDR_INVALID;
1232	request->epnum = musb_ep->current_epnum;
1233	request->ep = musb_ep;
1234
1235	return &request->request;
1236}
1237
1238/*
1239 * Free a request
1240 * Reused by ep0 code.
1241 */
1242void musb_free_request(struct usb_ep *ep, struct usb_request *req)
1243{
1244	kfree(to_musb_request(req));
1245}
1246
1247static LIST_HEAD(buffers);
1248
1249struct free_record {
1250	struct list_head	list;
1251	struct device		*dev;
1252	unsigned		bytes;
1253	dma_addr_t		dma;
1254};
1255
1256/*
1257 * Context: controller locked, IRQs blocked.
1258 */
1259void musb_ep_restart(struct musb *musb, struct musb_request *req)
1260{
1261	dev_dbg(musb->controller, "<== %s request %p len %u on hw_ep%d\n",
1262		req->tx ? "TX/IN" : "RX/OUT",
1263		&req->request, req->request.length, req->epnum);
1264
1265	musb_ep_select(musb->mregs, req->epnum);
1266	if (req->tx)
1267		txstate(musb, req);
1268	else
1269		rxstate(musb, req);
1270}
1271
1272static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
1273			gfp_t gfp_flags)
1274{
1275	struct musb_ep		*musb_ep;
1276	struct musb_request	*request;
1277	struct musb		*musb;
1278	int			status = 0;
1279	unsigned long		lockflags;
1280
1281	if (!ep || !req)
1282		return -EINVAL;
1283	if (!req->buf)
1284		return -ENODATA;
1285
1286	musb_ep = to_musb_ep(ep);
1287	musb = musb_ep->musb;
1288
1289	request = to_musb_request(req);
1290	request->musb = musb;
1291
1292	if (request->ep != musb_ep)
1293		return -EINVAL;
1294
1295	dev_dbg(musb->controller, "<== to %s request=%p\n", ep->name, req);
1296
1297	/* request is mine now... */
1298	request->request.actual = 0;
1299	request->request.status = -EINPROGRESS;
1300	request->epnum = musb_ep->current_epnum;
1301	request->tx = musb_ep->is_in;
1302
1303	map_dma_buffer(request, musb, musb_ep);
1304
1305	spin_lock_irqsave(&musb->lock, lockflags);
1306
1307	/* don't queue if the ep is down */
1308	if (!musb_ep->desc) {
1309		dev_dbg(musb->controller, "req %p queued to %s while ep %s\n",
1310				req, ep->name, "disabled");
1311		status = -ESHUTDOWN;
1312		goto cleanup;
 
1313	}
1314
1315	/* add request to the list */
1316	list_add_tail(&request->list, &musb_ep->req_list);
1317
1318	/* it this is the head of the queue, start i/o ... */
1319	if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
1320		musb_ep_restart(musb, request);
1321
1322cleanup:
1323	spin_unlock_irqrestore(&musb->lock, lockflags);
1324	return status;
1325}
1326
1327static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
1328{
1329	struct musb_ep		*musb_ep = to_musb_ep(ep);
1330	struct musb_request	*req = to_musb_request(request);
1331	struct musb_request	*r;
1332	unsigned long		flags;
1333	int			status = 0;
1334	struct musb		*musb = musb_ep->musb;
1335
1336	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
1337		return -EINVAL;
1338
1339	spin_lock_irqsave(&musb->lock, flags);
1340
1341	list_for_each_entry(r, &musb_ep->req_list, list) {
1342		if (r == req)
1343			break;
1344	}
1345	if (r != req) {
1346		dev_dbg(musb->controller, "request %p not queued to %s\n", request, ep->name);
1347		status = -EINVAL;
1348		goto done;
1349	}
1350
1351	/* if the hardware doesn't have the request, easy ... */
1352	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
1353		musb_g_giveback(musb_ep, request, -ECONNRESET);
1354
1355	/* ... else abort the dma transfer ... */
1356	else if (is_dma_capable() && musb_ep->dma) {
1357		struct dma_controller	*c = musb->dma_controller;
1358
1359		musb_ep_select(musb->mregs, musb_ep->current_epnum);
1360		if (c->channel_abort)
1361			status = c->channel_abort(musb_ep->dma);
1362		else
1363			status = -EBUSY;
1364		if (status == 0)
1365			musb_g_giveback(musb_ep, request, -ECONNRESET);
1366	} else {
1367		/* NOTE: by sticking to easily tested hardware/driver states,
1368		 * we leave counting of in-flight packets imprecise.
1369		 */
1370		musb_g_giveback(musb_ep, request, -ECONNRESET);
1371	}
1372
1373done:
1374	spin_unlock_irqrestore(&musb->lock, flags);
1375	return status;
1376}
1377
1378/*
1379 * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
1380 * data but will queue requests.
1381 *
1382 * exported to ep0 code
1383 */
1384static int musb_gadget_set_halt(struct usb_ep *ep, int value)
1385{
1386	struct musb_ep		*musb_ep = to_musb_ep(ep);
1387	u8			epnum = musb_ep->current_epnum;
1388	struct musb		*musb = musb_ep->musb;
1389	void __iomem		*epio = musb->endpoints[epnum].regs;
1390	void __iomem		*mbase;
1391	unsigned long		flags;
1392	u16			csr;
1393	struct musb_request	*request;
1394	int			status = 0;
1395
1396	if (!ep)
1397		return -EINVAL;
1398	mbase = musb->mregs;
1399
1400	spin_lock_irqsave(&musb->lock, flags);
1401
1402	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
1403		status = -EINVAL;
1404		goto done;
1405	}
1406
1407	musb_ep_select(mbase, epnum);
1408
1409	request = next_request(musb_ep);
1410	if (value) {
1411		if (request) {
1412			dev_dbg(musb->controller, "request in progress, cannot halt %s\n",
1413			    ep->name);
1414			status = -EAGAIN;
1415			goto done;
1416		}
1417		/* Cannot portably stall with non-empty FIFO */
1418		if (musb_ep->is_in) {
1419			csr = musb_readw(epio, MUSB_TXCSR);
1420			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
1421				dev_dbg(musb->controller, "FIFO busy, cannot halt %s\n", ep->name);
1422				status = -EAGAIN;
1423				goto done;
1424			}
1425		}
1426	} else
1427		musb_ep->wedged = 0;
1428
1429	/* set/clear the stall and toggle bits */
1430	dev_dbg(musb->controller, "%s: %s stall\n", ep->name, value ? "set" : "clear");
1431	if (musb_ep->is_in) {
1432		csr = musb_readw(epio, MUSB_TXCSR);
1433		csr |= MUSB_TXCSR_P_WZC_BITS
1434			| MUSB_TXCSR_CLRDATATOG;
1435		if (value)
1436			csr |= MUSB_TXCSR_P_SENDSTALL;
1437		else
1438			csr &= ~(MUSB_TXCSR_P_SENDSTALL
1439				| MUSB_TXCSR_P_SENTSTALL);
1440		csr &= ~MUSB_TXCSR_TXPKTRDY;
1441		musb_writew(epio, MUSB_TXCSR, csr);
1442	} else {
1443		csr = musb_readw(epio, MUSB_RXCSR);
1444		csr |= MUSB_RXCSR_P_WZC_BITS
1445			| MUSB_RXCSR_FLUSHFIFO
1446			| MUSB_RXCSR_CLRDATATOG;
1447		if (value)
1448			csr |= MUSB_RXCSR_P_SENDSTALL;
1449		else
1450			csr &= ~(MUSB_RXCSR_P_SENDSTALL
1451				| MUSB_RXCSR_P_SENTSTALL);
1452		musb_writew(epio, MUSB_RXCSR, csr);
1453	}
1454
1455	/* maybe start the first request in the queue */
1456	if (!musb_ep->busy && !value && request) {
1457		dev_dbg(musb->controller, "restarting the request\n");
1458		musb_ep_restart(musb, request);
1459	}
1460
1461done:
1462	spin_unlock_irqrestore(&musb->lock, flags);
1463	return status;
1464}
1465
1466/*
1467 * Sets the halt feature with the clear requests ignored
1468 */
1469static int musb_gadget_set_wedge(struct usb_ep *ep)
1470{
1471	struct musb_ep		*musb_ep = to_musb_ep(ep);
1472
1473	if (!ep)
1474		return -EINVAL;
1475
1476	musb_ep->wedged = 1;
1477
1478	return usb_ep_set_halt(ep);
1479}
1480
1481static int musb_gadget_fifo_status(struct usb_ep *ep)
1482{
1483	struct musb_ep		*musb_ep = to_musb_ep(ep);
1484	void __iomem		*epio = musb_ep->hw_ep->regs;
1485	int			retval = -EINVAL;
1486
1487	if (musb_ep->desc && !musb_ep->is_in) {
1488		struct musb		*musb = musb_ep->musb;
1489		int			epnum = musb_ep->current_epnum;
1490		void __iomem		*mbase = musb->mregs;
1491		unsigned long		flags;
1492
1493		spin_lock_irqsave(&musb->lock, flags);
1494
1495		musb_ep_select(mbase, epnum);
1496		/* FIXME return zero unless RXPKTRDY is set */
1497		retval = musb_readw(epio, MUSB_RXCOUNT);
1498
1499		spin_unlock_irqrestore(&musb->lock, flags);
1500	}
1501	return retval;
1502}
1503
1504static void musb_gadget_fifo_flush(struct usb_ep *ep)
1505{
1506	struct musb_ep	*musb_ep = to_musb_ep(ep);
1507	struct musb	*musb = musb_ep->musb;
1508	u8		epnum = musb_ep->current_epnum;
1509	void __iomem	*epio = musb->endpoints[epnum].regs;
1510	void __iomem	*mbase;
1511	unsigned long	flags;
1512	u16		csr, int_txe;
1513
1514	mbase = musb->mregs;
1515
1516	spin_lock_irqsave(&musb->lock, flags);
1517	musb_ep_select(mbase, (u8) epnum);
1518
1519	/* disable interrupts */
1520	int_txe = musb_readw(mbase, MUSB_INTRTXE);
1521	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
1522
1523	if (musb_ep->is_in) {
1524		csr = musb_readw(epio, MUSB_TXCSR);
1525		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
1526			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
1527			/*
1528			 * Setting both TXPKTRDY and FLUSHFIFO makes controller
1529			 * to interrupt current FIFO loading, but not flushing
1530			 * the already loaded ones.
1531			 */
1532			csr &= ~MUSB_TXCSR_TXPKTRDY;
1533			musb_writew(epio, MUSB_TXCSR, csr);
1534			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
1535			musb_writew(epio, MUSB_TXCSR, csr);
1536		}
1537	} else {
1538		csr = musb_readw(epio, MUSB_RXCSR);
1539		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
1540		musb_writew(epio, MUSB_RXCSR, csr);
1541		musb_writew(epio, MUSB_RXCSR, csr);
1542	}
1543
1544	/* re-enable interrupt */
1545	musb_writew(mbase, MUSB_INTRTXE, int_txe);
1546	spin_unlock_irqrestore(&musb->lock, flags);
1547}
1548
1549static const struct usb_ep_ops musb_ep_ops = {
1550	.enable		= musb_gadget_enable,
1551	.disable	= musb_gadget_disable,
1552	.alloc_request	= musb_alloc_request,
1553	.free_request	= musb_free_request,
1554	.queue		= musb_gadget_queue,
1555	.dequeue	= musb_gadget_dequeue,
1556	.set_halt	= musb_gadget_set_halt,
1557	.set_wedge	= musb_gadget_set_wedge,
1558	.fifo_status	= musb_gadget_fifo_status,
1559	.fifo_flush	= musb_gadget_fifo_flush
1560};
1561
1562/* ----------------------------------------------------------------------- */
1563
1564static int musb_gadget_get_frame(struct usb_gadget *gadget)
1565{
1566	struct musb	*musb = gadget_to_musb(gadget);
1567
1568	return (int)musb_readw(musb->mregs, MUSB_FRAME);
1569}
1570
1571static int musb_gadget_wakeup(struct usb_gadget *gadget)
1572{
1573	struct musb	*musb = gadget_to_musb(gadget);
1574	void __iomem	*mregs = musb->mregs;
1575	unsigned long	flags;
1576	int		status = -EINVAL;
1577	u8		power, devctl;
1578	int		retries;
1579
1580	spin_lock_irqsave(&musb->lock, flags);
1581
1582	switch (musb->xceiv->state) {
1583	case OTG_STATE_B_PERIPHERAL:
1584		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
1585		 * that's part of the standard usb 1.1 state machine, and
1586		 * doesn't affect OTG transitions.
1587		 */
1588		if (musb->may_wakeup && musb->is_suspended)
1589			break;
1590		goto done;
1591	case OTG_STATE_B_IDLE:
1592		/* Start SRP ... OTG not required. */
1593		devctl = musb_readb(mregs, MUSB_DEVCTL);
1594		dev_dbg(musb->controller, "Sending SRP: devctl: %02x\n", devctl);
1595		devctl |= MUSB_DEVCTL_SESSION;
1596		musb_writeb(mregs, MUSB_DEVCTL, devctl);
1597		devctl = musb_readb(mregs, MUSB_DEVCTL);
1598		retries = 100;
1599		while (!(devctl & MUSB_DEVCTL_SESSION)) {
1600			devctl = musb_readb(mregs, MUSB_DEVCTL);
1601			if (retries-- < 1)
1602				break;
1603		}
1604		retries = 10000;
1605		while (devctl & MUSB_DEVCTL_SESSION) {
1606			devctl = musb_readb(mregs, MUSB_DEVCTL);
1607			if (retries-- < 1)
1608				break;
1609		}
1610
1611		spin_unlock_irqrestore(&musb->lock, flags);
1612		otg_start_srp(musb->xceiv);
1613		spin_lock_irqsave(&musb->lock, flags);
1614
1615		/* Block idling for at least 1s */
1616		musb_platform_try_idle(musb,
1617			jiffies + msecs_to_jiffies(1 * HZ));
1618
1619		status = 0;
1620		goto done;
1621	default:
1622		dev_dbg(musb->controller, "Unhandled wake: %s\n",
1623			otg_state_string(musb->xceiv->state));
1624		goto done;
1625	}
1626
1627	status = 0;
1628
1629	power = musb_readb(mregs, MUSB_POWER);
1630	power |= MUSB_POWER_RESUME;
1631	musb_writeb(mregs, MUSB_POWER, power);
1632	dev_dbg(musb->controller, "issue wakeup\n");
1633
1634	/* FIXME do this next chunk in a timer callback, no udelay */
1635	mdelay(2);
1636
1637	power = musb_readb(mregs, MUSB_POWER);
1638	power &= ~MUSB_POWER_RESUME;
1639	musb_writeb(mregs, MUSB_POWER, power);
1640done:
1641	spin_unlock_irqrestore(&musb->lock, flags);
1642	return status;
1643}
1644
1645static int
1646musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
1647{
1648	struct musb	*musb = gadget_to_musb(gadget);
1649
1650	musb->is_self_powered = !!is_selfpowered;
1651	return 0;
1652}
1653
1654static void musb_pullup(struct musb *musb, int is_on)
1655{
1656	u8 power;
1657
1658	power = musb_readb(musb->mregs, MUSB_POWER);
1659	if (is_on)
1660		power |= MUSB_POWER_SOFTCONN;
1661	else
1662		power &= ~MUSB_POWER_SOFTCONN;
1663
1664	/* FIXME if on, HdrcStart; if off, HdrcStop */
1665
1666	dev_dbg(musb->controller, "gadget D+ pullup %s\n",
1667		is_on ? "on" : "off");
1668	musb_writeb(musb->mregs, MUSB_POWER, power);
1669}
1670
1671#if 0
1672static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
1673{
1674	dev_dbg(musb->controller, "<= %s =>\n", __func__);
1675
1676	/*
1677	 * FIXME iff driver's softconnect flag is set (as it is during probe,
1678	 * though that can clear it), just musb_pullup().
1679	 */
1680
1681	return -EINVAL;
1682}
1683#endif
1684
1685static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1686{
1687	struct musb	*musb = gadget_to_musb(gadget);
1688
1689	if (!musb->xceiv->set_power)
1690		return -EOPNOTSUPP;
1691	return otg_set_power(musb->xceiv, mA);
1692}
1693
1694static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
1695{
1696	struct musb	*musb = gadget_to_musb(gadget);
1697	unsigned long	flags;
1698
1699	is_on = !!is_on;
1700
1701	pm_runtime_get_sync(musb->controller);
1702
1703	/* NOTE: this assumes we are sensing vbus; we'd rather
1704	 * not pullup unless the B-session is active.
1705	 */
1706	spin_lock_irqsave(&musb->lock, flags);
1707	if (is_on != musb->softconnect) {
1708		musb->softconnect = is_on;
1709		musb_pullup(musb, is_on);
1710	}
1711	spin_unlock_irqrestore(&musb->lock, flags);
1712
1713	pm_runtime_put(musb->controller);
1714
1715	return 0;
1716}
1717
1718static int musb_gadget_start(struct usb_gadget *g,
1719		struct usb_gadget_driver *driver);
1720static int musb_gadget_stop(struct usb_gadget *g,
1721		struct usb_gadget_driver *driver);
1722
1723static const struct usb_gadget_ops musb_gadget_operations = {
1724	.get_frame		= musb_gadget_get_frame,
1725	.wakeup			= musb_gadget_wakeup,
1726	.set_selfpowered	= musb_gadget_set_self_powered,
1727	/* .vbus_session		= musb_gadget_vbus_session, */
1728	.vbus_draw		= musb_gadget_vbus_draw,
1729	.pullup			= musb_gadget_pullup,
1730	.udc_start		= musb_gadget_start,
1731	.udc_stop		= musb_gadget_stop,
1732};
1733
1734/* ----------------------------------------------------------------------- */
1735
1736/* Registration */
1737
1738/* Only this registration code "knows" the rule (from USB standards)
1739 * about there being only one external upstream port.  It assumes
1740 * all peripheral ports are external...
1741 */
1742
1743static void musb_gadget_release(struct device *dev)
1744{
1745	/* kref_put(WHAT) */
1746	dev_dbg(dev, "%s\n", __func__);
1747}
1748
1749
1750static void __init
1751init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
1752{
1753	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
1754
1755	memset(ep, 0, sizeof *ep);
1756
1757	ep->current_epnum = epnum;
1758	ep->musb = musb;
1759	ep->hw_ep = hw_ep;
1760	ep->is_in = is_in;
1761
1762	INIT_LIST_HEAD(&ep->req_list);
1763
1764	sprintf(ep->name, "ep%d%s", epnum,
1765			(!epnum || hw_ep->is_shared_fifo) ? "" : (
1766				is_in ? "in" : "out"));
1767	ep->end_point.name = ep->name;
1768	INIT_LIST_HEAD(&ep->end_point.ep_list);
1769	if (!epnum) {
1770		ep->end_point.maxpacket = 64;
1771		ep->end_point.ops = &musb_g_ep0_ops;
1772		musb->g.ep0 = &ep->end_point;
1773	} else {
1774		if (is_in)
1775			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
1776		else
1777			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
1778		ep->end_point.ops = &musb_ep_ops;
1779		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
1780	}
1781}
1782
1783/*
1784 * Initialize the endpoints exposed to peripheral drivers, with backlinks
1785 * to the rest of the driver state.
1786 */
1787static inline void __init musb_g_init_endpoints(struct musb *musb)
1788{
1789	u8			epnum;
1790	struct musb_hw_ep	*hw_ep;
1791	unsigned		count = 0;
1792
1793	/* initialize endpoint list just once */
1794	INIT_LIST_HEAD(&(musb->g.ep_list));
1795
1796	for (epnum = 0, hw_ep = musb->endpoints;
1797			epnum < musb->nr_endpoints;
1798			epnum++, hw_ep++) {
1799		if (hw_ep->is_shared_fifo /* || !epnum */) {
1800			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
1801			count++;
1802		} else {
1803			if (hw_ep->max_packet_sz_tx) {
1804				init_peripheral_ep(musb, &hw_ep->ep_in,
1805							epnum, 1);
1806				count++;
1807			}
1808			if (hw_ep->max_packet_sz_rx) {
1809				init_peripheral_ep(musb, &hw_ep->ep_out,
1810							epnum, 0);
1811				count++;
1812			}
1813		}
1814	}
1815}
1816
1817/* called once during driver setup to initialize and link into
1818 * the driver model; memory is zeroed.
1819 */
1820int __init musb_gadget_setup(struct musb *musb)
1821{
1822	int status;
1823
1824	/* REVISIT minor race:  if (erroneously) setting up two
1825	 * musb peripherals at the same time, only the bus lock
1826	 * is probably held.
1827	 */
1828
1829	musb->g.ops = &musb_gadget_operations;
1830	musb->g.is_dualspeed = 1;
1831	musb->g.speed = USB_SPEED_UNKNOWN;
1832
 
 
 
 
1833	/* this "gadget" abstracts/virtualizes the controller */
1834	dev_set_name(&musb->g.dev, "gadget");
1835	musb->g.dev.parent = musb->controller;
1836	musb->g.dev.dma_mask = musb->controller->dma_mask;
1837	musb->g.dev.release = musb_gadget_release;
1838	musb->g.name = musb_driver_name;
1839
1840	if (is_otg_enabled(musb))
1841		musb->g.is_otg = 1;
 
 
1842
1843	musb_g_init_endpoints(musb);
1844
1845	musb->is_active = 0;
1846	musb_platform_try_idle(musb, 0);
1847
1848	status = device_register(&musb->g.dev);
1849	if (status != 0) {
1850		put_device(&musb->g.dev);
1851		return status;
1852	}
1853	status = usb_add_gadget_udc(musb->controller, &musb->g);
1854	if (status)
1855		goto err;
1856
1857	return 0;
1858err:
1859	musb->g.dev.parent = NULL;
1860	device_unregister(&musb->g.dev);
1861	return status;
1862}
1863
1864void musb_gadget_cleanup(struct musb *musb)
1865{
 
 
1866	usb_del_gadget_udc(&musb->g);
1867	if (musb->g.dev.parent)
1868		device_unregister(&musb->g.dev);
1869}
1870
1871/*
1872 * Register the gadget driver. Used by gadget drivers when
1873 * registering themselves with the controller.
1874 *
1875 * -EINVAL something went wrong (not driver)
1876 * -EBUSY another gadget is already using the controller
1877 * -ENOMEM no memory to perform the operation
1878 *
1879 * @param driver the gadget driver
1880 * @return <0 if error, 0 if everything is fine
1881 */
1882static int musb_gadget_start(struct usb_gadget *g,
1883		struct usb_gadget_driver *driver)
1884{
1885	struct musb		*musb = gadget_to_musb(g);
 
1886	unsigned long		flags;
1887	int			retval = -EINVAL;
1888
1889	if (driver->speed != USB_SPEED_HIGH)
1890		goto err0;
 
 
1891
1892	pm_runtime_get_sync(musb->controller);
1893
1894	dev_dbg(musb->controller, "registering driver %s\n", driver->function);
1895
1896	musb->softconnect = 0;
1897	musb->gadget_driver = driver;
1898
1899	spin_lock_irqsave(&musb->lock, flags);
1900	musb->is_active = 1;
1901
1902	otg_set_peripheral(musb->xceiv, &musb->g);
1903	musb->xceiv->state = OTG_STATE_B_IDLE;
1904
1905	/*
1906	 * FIXME this ignores the softconnect flag.  Drivers are
1907	 * allowed hold the peripheral inactive until for example
1908	 * userspace hooks up printer hardware or DSP codecs, so
1909	 * hosts only see fully functional devices.
1910	 */
1911
1912	if (!is_otg_enabled(musb))
1913		musb_start(musb);
1914
1915	spin_unlock_irqrestore(&musb->lock, flags);
1916
1917	if (is_otg_enabled(musb)) {
1918		struct usb_hcd	*hcd = musb_to_hcd(musb);
1919
1920		dev_dbg(musb->controller, "OTG startup...\n");
1921
1922		/* REVISIT:  funcall to other code, which also
1923		 * handles power budgeting ... this way also
1924		 * ensures HdrcStart is indirectly called.
1925		 */
1926		retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
1927		if (retval < 0) {
1928			dev_dbg(musb->controller, "add_hcd failed, %d\n", retval);
1929			goto err2;
1930		}
1931
1932		if ((musb->xceiv->last_event == USB_EVENT_ID)
1933					&& musb->xceiv->set_vbus)
1934			otg_set_vbus(musb->xceiv, 1);
 
 
 
1935
1936		hcd->self.uses_pio_for_control = 1;
1937	}
1938	if (musb->xceiv->last_event == USB_EVENT_NONE)
1939		pm_runtime_put(musb->controller);
1940
1941	return 0;
1942
1943err2:
1944	if (!is_otg_enabled(musb))
1945		musb_stop(musb);
1946err0:
1947	return retval;
1948}
1949
1950static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
1951{
1952	int			i;
1953	struct musb_hw_ep	*hw_ep;
1954
1955	/* don't disconnect if it's not connected */
1956	if (musb->g.speed == USB_SPEED_UNKNOWN)
1957		driver = NULL;
1958	else
1959		musb->g.speed = USB_SPEED_UNKNOWN;
1960
1961	/* deactivate the hardware */
1962	if (musb->softconnect) {
1963		musb->softconnect = 0;
1964		musb_pullup(musb, 0);
1965	}
1966	musb_stop(musb);
1967
1968	/* killing any outstanding requests will quiesce the driver;
1969	 * then report disconnect
1970	 */
1971	if (driver) {
1972		for (i = 0, hw_ep = musb->endpoints;
1973				i < musb->nr_endpoints;
1974				i++, hw_ep++) {
1975			musb_ep_select(musb->mregs, i);
1976			if (hw_ep->is_shared_fifo /* || !epnum */) {
1977				nuke(&hw_ep->ep_in, -ESHUTDOWN);
1978			} else {
1979				if (hw_ep->max_packet_sz_tx)
1980					nuke(&hw_ep->ep_in, -ESHUTDOWN);
1981				if (hw_ep->max_packet_sz_rx)
1982					nuke(&hw_ep->ep_out, -ESHUTDOWN);
1983			}
1984		}
1985
1986		spin_unlock(&musb->lock);
1987		driver->disconnect(&musb->g);
1988		spin_lock(&musb->lock);
1989	}
1990}
1991
1992/*
1993 * Unregister the gadget driver. Used by gadget drivers when
1994 * unregistering themselves from the controller.
1995 *
1996 * @param driver the gadget driver to unregister
1997 */
1998static int musb_gadget_stop(struct usb_gadget *g,
1999		struct usb_gadget_driver *driver)
2000{
2001	struct musb	*musb = gadget_to_musb(g);
2002	unsigned long	flags;
2003
2004	if (musb->xceiv->last_event == USB_EVENT_NONE)
2005		pm_runtime_get_sync(musb->controller);
2006
2007	/*
2008	 * REVISIT always use otg_set_peripheral() here too;
2009	 * this needs to shut down the OTG engine.
2010	 */
2011
2012	spin_lock_irqsave(&musb->lock, flags);
2013
2014	musb_hnp_stop(musb);
2015
2016	(void) musb_gadget_vbus_draw(&musb->g, 0);
2017
2018	musb->xceiv->state = OTG_STATE_UNDEFINED;
2019	stop_activity(musb, driver);
2020	otg_set_peripheral(musb->xceiv, NULL);
2021
2022	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
2023
2024	musb->is_active = 0;
 
2025	musb_platform_try_idle(musb, 0);
2026	spin_unlock_irqrestore(&musb->lock, flags);
2027
2028	if (is_otg_enabled(musb)) {
2029		usb_remove_hcd(musb_to_hcd(musb));
2030		/* FIXME we need to be able to register another
2031		 * gadget driver here and have everything work;
2032		 * that currently misbehaves.
2033		 */
2034	}
2035
2036	if (!is_otg_enabled(musb))
2037		musb_stop(musb);
2038
2039	pm_runtime_put(musb->controller);
2040
2041	return 0;
2042}
2043
2044/* ----------------------------------------------------------------------- */
2045
2046/* lifecycle operations called through plat_uds.c */
2047
2048void musb_g_resume(struct musb *musb)
2049{
2050	musb->is_suspended = 0;
2051	switch (musb->xceiv->state) {
2052	case OTG_STATE_B_IDLE:
2053		break;
2054	case OTG_STATE_B_WAIT_ACON:
2055	case OTG_STATE_B_PERIPHERAL:
2056		musb->is_active = 1;
2057		if (musb->gadget_driver && musb->gadget_driver->resume) {
2058			spin_unlock(&musb->lock);
2059			musb->gadget_driver->resume(&musb->g);
2060			spin_lock(&musb->lock);
2061		}
2062		break;
2063	default:
2064		WARNING("unhandled RESUME transition (%s)\n",
2065				otg_state_string(musb->xceiv->state));
2066	}
2067}
2068
2069/* called when SOF packets stop for 3+ msec */
2070void musb_g_suspend(struct musb *musb)
2071{
2072	u8	devctl;
2073
2074	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2075	dev_dbg(musb->controller, "devctl %02x\n", devctl);
2076
2077	switch (musb->xceiv->state) {
2078	case OTG_STATE_B_IDLE:
2079		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
2080			musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
2081		break;
2082	case OTG_STATE_B_PERIPHERAL:
2083		musb->is_suspended = 1;
2084		if (musb->gadget_driver && musb->gadget_driver->suspend) {
2085			spin_unlock(&musb->lock);
2086			musb->gadget_driver->suspend(&musb->g);
2087			spin_lock(&musb->lock);
2088		}
2089		break;
2090	default:
2091		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
2092		 * A_PERIPHERAL may need care too
2093		 */
2094		WARNING("unhandled SUSPEND transition (%s)\n",
2095				otg_state_string(musb->xceiv->state));
2096	}
2097}
2098
2099/* Called during SRP */
2100void musb_g_wakeup(struct musb *musb)
2101{
2102	musb_gadget_wakeup(&musb->g);
2103}
2104
2105/* called when VBUS drops below session threshold, and in other cases */
2106void musb_g_disconnect(struct musb *musb)
2107{
2108	void __iomem	*mregs = musb->mregs;
2109	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
2110
2111	dev_dbg(musb->controller, "devctl %02x\n", devctl);
2112
2113	/* clear HR */
2114	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
2115
2116	/* don't draw vbus until new b-default session */
2117	(void) musb_gadget_vbus_draw(&musb->g, 0);
2118
2119	musb->g.speed = USB_SPEED_UNKNOWN;
2120	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
2121		spin_unlock(&musb->lock);
2122		musb->gadget_driver->disconnect(&musb->g);
2123		spin_lock(&musb->lock);
2124	}
2125
2126	switch (musb->xceiv->state) {
2127	default:
2128		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
2129			otg_state_string(musb->xceiv->state));
2130		musb->xceiv->state = OTG_STATE_A_IDLE;
2131		MUSB_HST_MODE(musb);
2132		break;
2133	case OTG_STATE_A_PERIPHERAL:
2134		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
2135		MUSB_HST_MODE(musb);
2136		break;
2137	case OTG_STATE_B_WAIT_ACON:
2138	case OTG_STATE_B_HOST:
2139	case OTG_STATE_B_PERIPHERAL:
2140	case OTG_STATE_B_IDLE:
2141		musb->xceiv->state = OTG_STATE_B_IDLE;
2142		break;
2143	case OTG_STATE_B_SRP_INIT:
2144		break;
2145	}
2146
2147	musb->is_active = 0;
2148}
2149
2150void musb_g_reset(struct musb *musb)
2151__releases(musb->lock)
2152__acquires(musb->lock)
2153{
2154	void __iomem	*mbase = musb->mregs;
2155	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
2156	u8		power;
2157
2158	dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n",
2159			(devctl & MUSB_DEVCTL_BDEVICE)
2160				? "B-Device" : "A-Device",
2161			musb_readb(mbase, MUSB_FADDR),
2162			musb->gadget_driver
2163				? musb->gadget_driver->driver.name
2164				: NULL
2165			);
2166
2167	/* report disconnect, if we didn't already (flushing EP state) */
2168	if (musb->g.speed != USB_SPEED_UNKNOWN)
2169		musb_g_disconnect(musb);
2170
2171	/* clear HR */
2172	else if (devctl & MUSB_DEVCTL_HR)
2173		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
2174
2175
2176	/* what speed did we negotiate? */
2177	power = musb_readb(mbase, MUSB_POWER);
2178	musb->g.speed = (power & MUSB_POWER_HSMODE)
2179			? USB_SPEED_HIGH : USB_SPEED_FULL;
2180
2181	/* start in USB_STATE_DEFAULT */
2182	musb->is_active = 1;
2183	musb->is_suspended = 0;
2184	MUSB_DEV_MODE(musb);
2185	musb->address = 0;
2186	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
2187
2188	musb->may_wakeup = 0;
2189	musb->g.b_hnp_enable = 0;
2190	musb->g.a_alt_hnp_support = 0;
2191	musb->g.a_hnp_support = 0;
2192
2193	/* Normal reset, as B-Device;
2194	 * or else after HNP, as A-Device
2195	 */
2196	if (devctl & MUSB_DEVCTL_BDEVICE) {
 
 
 
 
 
2197		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
2198		musb->g.is_a_peripheral = 0;
2199	} else if (is_otg_enabled(musb)) {
 
 
 
2200		musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
2201		musb->g.is_a_peripheral = 1;
2202	} else
2203		WARN_ON(1);
2204
2205	/* start with default limits on VBUS power draw */
2206	(void) musb_gadget_vbus_draw(&musb->g,
2207			is_otg_enabled(musb) ? 8 : 100);
2208}