Loading...
1/*
2 * Driver for Samsung SoC onboard UARTs.
3 *
4 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
5 * http://armlinux.simtec.co.uk/
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10*/
11
12struct s3c24xx_uart_info {
13 char *name;
14 unsigned int type;
15 unsigned int fifosize;
16 unsigned long rx_fifomask;
17 unsigned long rx_fifoshift;
18 unsigned long rx_fifofull;
19 unsigned long tx_fifomask;
20 unsigned long tx_fifoshift;
21 unsigned long tx_fifofull;
22
23 /* uart port features */
24
25 unsigned int has_divslot:1;
26
27 /* clock source control */
28
29 int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
30 int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
31
32 /* uart controls */
33 int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
34};
35
36struct s3c24xx_uart_port {
37 unsigned char rx_claimed;
38 unsigned char tx_claimed;
39 unsigned int pm_level;
40 unsigned long baudclk_rate;
41
42 unsigned int rx_irq;
43 unsigned int tx_irq;
44
45 struct s3c24xx_uart_info *info;
46 struct s3c24xx_uart_clksrc *clksrc;
47 struct clk *clk;
48 struct clk *baudclk;
49 struct uart_port port;
50
51#ifdef CONFIG_CPU_FREQ
52 struct notifier_block freq_transition;
53#endif
54};
55
56/* conversion functions */
57
58#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
59#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
60
61/* register access controls */
62
63#define portaddr(port, reg) ((port)->membase + (reg))
64
65#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
66#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
67
68#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
69#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
70
71extern int s3c24xx_serial_probe(struct platform_device *dev,
72 struct s3c24xx_uart_info *uart);
73
74extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
75
76extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
77 struct s3c24xx_uart_info **uart);
78
79extern int s3c24xx_serial_init(struct platform_driver *drv,
80 struct s3c24xx_uart_info *info);
81
82#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
83
84extern void printascii(const char *);
85
86static void dbg(const char *fmt, ...)
87{
88 va_list va;
89 char buff[256];
90
91 va_start(va, fmt);
92 vsprintf(buff, fmt, va);
93 va_end(va);
94
95 printascii(buff);
96}
97
98#else
99#define dbg(x...) do { } while (0)
100#endif
1/*
2 * Driver for Samsung SoC onboard UARTs.
3 *
4 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
5 * http://armlinux.simtec.co.uk/
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10*/
11
12struct s3c24xx_uart_info {
13 char *name;
14 unsigned int type;
15 unsigned int fifosize;
16 unsigned long rx_fifomask;
17 unsigned long rx_fifoshift;
18 unsigned long rx_fifofull;
19 unsigned long tx_fifomask;
20 unsigned long tx_fifoshift;
21 unsigned long tx_fifofull;
22 unsigned int def_clk_sel;
23 unsigned long num_clks;
24 unsigned long clksel_mask;
25 unsigned long clksel_shift;
26
27 /* uart port features */
28
29 unsigned int has_divslot:1;
30
31 /* uart controls */
32 int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
33};
34
35struct s3c24xx_serial_drv_data {
36 struct s3c24xx_uart_info *info;
37 struct s3c2410_uartcfg *def_cfg;
38 unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
39};
40
41struct s3c24xx_uart_port {
42 unsigned char rx_claimed;
43 unsigned char tx_claimed;
44 unsigned int pm_level;
45 unsigned long baudclk_rate;
46
47 unsigned int rx_irq;
48 unsigned int tx_irq;
49
50 struct s3c24xx_uart_info *info;
51 struct clk *clk;
52 struct clk *baudclk;
53 struct uart_port port;
54 struct s3c24xx_serial_drv_data *drv_data;
55
56 /* reference to platform data */
57 struct s3c2410_uartcfg *cfg;
58
59#ifdef CONFIG_CPU_FREQ
60 struct notifier_block freq_transition;
61#endif
62};
63
64/* conversion functions */
65
66#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
67
68/* register access controls */
69
70#define portaddr(port, reg) ((port)->membase + (reg))
71#define portaddrl(port, reg) \
72 ((unsigned long *)(unsigned long)((port)->membase + (reg)))
73
74#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
75#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
76
77#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
78#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
79
80#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
81 defined(CONFIG_DEBUG_LL) && \
82 !defined(MODULE)
83
84extern void printascii(const char *);
85
86static void dbg(const char *fmt, ...)
87{
88 va_list va;
89 char buff[256];
90
91 va_start(va, fmt);
92 vsprintf(buff, fmt, va);
93 va_end(va);
94
95 printascii(buff);
96}
97
98#else
99#define dbg(x...) do { } while (0)
100#endif