Loading...
1/*
2 * SPI master driver using generic bitbanged GPIO
3 *
4 * Copyright (C) 2006,2008 David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20#include <linux/kernel.h>
21#include <linux/init.h>
22#include <linux/platform_device.h>
23#include <linux/gpio.h>
24
25#include <linux/spi/spi.h>
26#include <linux/spi/spi_bitbang.h>
27#include <linux/spi/spi_gpio.h>
28
29
30/*
31 * This bitbanging SPI master driver should help make systems usable
32 * when a native hardware SPI engine is not available, perhaps because
33 * its driver isn't yet working or because the I/O pins it requires
34 * are used for other purposes.
35 *
36 * platform_device->driver_data ... points to spi_gpio
37 *
38 * spi->controller_state ... reserved for bitbang framework code
39 * spi->controller_data ... holds chipselect GPIO
40 *
41 * spi->master->dev.driver_data ... points to spi_gpio->bitbang
42 */
43
44struct spi_gpio {
45 struct spi_bitbang bitbang;
46 struct spi_gpio_platform_data pdata;
47 struct platform_device *pdev;
48};
49
50/*----------------------------------------------------------------------*/
51
52/*
53 * Because the overhead of going through four GPIO procedure calls
54 * per transferred bit can make performance a problem, this code
55 * is set up so that you can use it in either of two ways:
56 *
57 * - The slow generic way: set up platform_data to hold the GPIO
58 * numbers used for MISO/MOSI/SCK, and issue procedure calls for
59 * each of them. This driver can handle several such busses.
60 *
61 * - The quicker inlined way: only helps with platform GPIO code
62 * that inlines operations for constant GPIOs. This can give
63 * you tight (fast!) inner loops, but each such bus needs a
64 * new driver. You'll define a new C file, with Makefile and
65 * Kconfig support; the C code can be a total of six lines:
66 *
67 * #define DRIVER_NAME "myboard_spi2"
68 * #define SPI_MISO_GPIO 119
69 * #define SPI_MOSI_GPIO 120
70 * #define SPI_SCK_GPIO 121
71 * #define SPI_N_CHIPSEL 4
72 * #include "spi-gpio.c"
73 */
74
75#ifndef DRIVER_NAME
76#define DRIVER_NAME "spi_gpio"
77
78#define GENERIC_BITBANG /* vs tight inlines */
79
80/* all functions referencing these symbols must define pdata */
81#define SPI_MISO_GPIO ((pdata)->miso)
82#define SPI_MOSI_GPIO ((pdata)->mosi)
83#define SPI_SCK_GPIO ((pdata)->sck)
84
85#define SPI_N_CHIPSEL ((pdata)->num_chipselect)
86
87#endif
88
89/*----------------------------------------------------------------------*/
90
91static inline const struct spi_gpio_platform_data * __pure
92spi_to_pdata(const struct spi_device *spi)
93{
94 const struct spi_bitbang *bang;
95 const struct spi_gpio *spi_gpio;
96
97 bang = spi_master_get_devdata(spi->master);
98 spi_gpio = container_of(bang, struct spi_gpio, bitbang);
99 return &spi_gpio->pdata;
100}
101
102/* this is #defined to avoid unused-variable warnings when inlining */
103#define pdata spi_to_pdata(spi)
104
105static inline void setsck(const struct spi_device *spi, int is_on)
106{
107 gpio_set_value(SPI_SCK_GPIO, is_on);
108}
109
110static inline void setmosi(const struct spi_device *spi, int is_on)
111{
112 gpio_set_value(SPI_MOSI_GPIO, is_on);
113}
114
115static inline int getmiso(const struct spi_device *spi)
116{
117 return !!gpio_get_value(SPI_MISO_GPIO);
118}
119
120#undef pdata
121
122/*
123 * NOTE: this clocks "as fast as we can". It "should" be a function of the
124 * requested device clock. Software overhead means we usually have trouble
125 * reaching even one Mbit/sec (except when we can inline bitops), so for now
126 * we'll just assume we never need additional per-bit slowdowns.
127 */
128#define spidelay(nsecs) do {} while (0)
129
130#include "spi-bitbang-txrx.h"
131
132/*
133 * These functions can leverage inline expansion of GPIO calls to shrink
134 * costs for a txrx bit, often by factors of around ten (by instruction
135 * count). That is particularly visible for larger word sizes, but helps
136 * even with default 8-bit words.
137 *
138 * REVISIT overheads calling these functions for each word also have
139 * significant performance costs. Having txrx_bufs() calls that inline
140 * the txrx_word() logic would help performance, e.g. on larger blocks
141 * used with flash storage or MMC/SD. There should also be ways to make
142 * GCC be less stupid about reloading registers inside the I/O loops,
143 * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
144 */
145
146static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
147 unsigned nsecs, u32 word, u8 bits)
148{
149 return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
150}
151
152static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
153 unsigned nsecs, u32 word, u8 bits)
154{
155 return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
156}
157
158static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
159 unsigned nsecs, u32 word, u8 bits)
160{
161 return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
162}
163
164static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
165 unsigned nsecs, u32 word, u8 bits)
166{
167 return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
168}
169
170/*
171 * These functions do not call setmosi or getmiso if respective flag
172 * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
173 * call when such pin is not present or defined in the controller.
174 * A separate set of callbacks is defined to get highest possible
175 * speed in the generic case (when both MISO and MOSI lines are
176 * available), as optimiser will remove the checks when argument is
177 * constant.
178 */
179
180static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
181 unsigned nsecs, u32 word, u8 bits)
182{
183 unsigned flags = spi->master->flags;
184 return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
185}
186
187static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
188 unsigned nsecs, u32 word, u8 bits)
189{
190 unsigned flags = spi->master->flags;
191 return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
192}
193
194static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
195 unsigned nsecs, u32 word, u8 bits)
196{
197 unsigned flags = spi->master->flags;
198 return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
199}
200
201static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
202 unsigned nsecs, u32 word, u8 bits)
203{
204 unsigned flags = spi->master->flags;
205 return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
206}
207
208/*----------------------------------------------------------------------*/
209
210static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
211{
212 unsigned long cs = (unsigned long) spi->controller_data;
213
214 /* set initial clock polarity */
215 if (is_active)
216 setsck(spi, spi->mode & SPI_CPOL);
217
218 if (cs != SPI_GPIO_NO_CHIPSELECT) {
219 /* SPI is normally active-low */
220 gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
221 }
222}
223
224static int spi_gpio_setup(struct spi_device *spi)
225{
226 unsigned long cs = (unsigned long) spi->controller_data;
227 int status = 0;
228
229 if (spi->bits_per_word > 32)
230 return -EINVAL;
231
232 if (!spi->controller_state) {
233 if (cs != SPI_GPIO_NO_CHIPSELECT) {
234 status = gpio_request(cs, dev_name(&spi->dev));
235 if (status)
236 return status;
237 status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
238 }
239 }
240 if (!status)
241 status = spi_bitbang_setup(spi);
242 if (status) {
243 if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
244 gpio_free(cs);
245 }
246 return status;
247}
248
249static void spi_gpio_cleanup(struct spi_device *spi)
250{
251 unsigned long cs = (unsigned long) spi->controller_data;
252
253 if (cs != SPI_GPIO_NO_CHIPSELECT)
254 gpio_free(cs);
255 spi_bitbang_cleanup(spi);
256}
257
258static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
259{
260 int value;
261
262 value = gpio_request(pin, label);
263 if (value == 0) {
264 if (is_in)
265 value = gpio_direction_input(pin);
266 else
267 value = gpio_direction_output(pin, 0);
268 }
269 return value;
270}
271
272static int __init
273spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
274 u16 *res_flags)
275{
276 int value;
277
278 /* NOTE: SPI_*_GPIO symbols may reference "pdata" */
279
280 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
281 value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
282 if (value)
283 goto done;
284 } else {
285 /* HW configuration without MOSI pin */
286 *res_flags |= SPI_MASTER_NO_TX;
287 }
288
289 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
290 value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
291 if (value)
292 goto free_mosi;
293 } else {
294 /* HW configuration without MISO pin */
295 *res_flags |= SPI_MASTER_NO_RX;
296 }
297
298 value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
299 if (value)
300 goto free_miso;
301
302 goto done;
303
304free_miso:
305 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
306 gpio_free(SPI_MISO_GPIO);
307free_mosi:
308 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
309 gpio_free(SPI_MOSI_GPIO);
310done:
311 return value;
312}
313
314static int __init spi_gpio_probe(struct platform_device *pdev)
315{
316 int status;
317 struct spi_master *master;
318 struct spi_gpio *spi_gpio;
319 struct spi_gpio_platform_data *pdata;
320 u16 master_flags = 0;
321
322 pdata = pdev->dev.platform_data;
323#ifdef GENERIC_BITBANG
324 if (!pdata || !pdata->num_chipselect)
325 return -ENODEV;
326#endif
327
328 status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
329 if (status < 0)
330 return status;
331
332 master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio);
333 if (!master) {
334 status = -ENOMEM;
335 goto gpio_free;
336 }
337 spi_gpio = spi_master_get_devdata(master);
338 platform_set_drvdata(pdev, spi_gpio);
339
340 spi_gpio->pdev = pdev;
341 if (pdata)
342 spi_gpio->pdata = *pdata;
343
344 master->flags = master_flags;
345 master->bus_num = pdev->id;
346 master->num_chipselect = SPI_N_CHIPSEL;
347 master->setup = spi_gpio_setup;
348 master->cleanup = spi_gpio_cleanup;
349
350 spi_gpio->bitbang.master = spi_master_get(master);
351 spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
352
353 if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
354 spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
355 spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
356 spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
357 spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
358 } else {
359 spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
360 spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
361 spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
362 spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
363 }
364 spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
365 spi_gpio->bitbang.flags = SPI_CS_HIGH;
366
367 status = spi_bitbang_start(&spi_gpio->bitbang);
368 if (status < 0) {
369 spi_master_put(spi_gpio->bitbang.master);
370gpio_free:
371 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
372 gpio_free(SPI_MISO_GPIO);
373 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
374 gpio_free(SPI_MOSI_GPIO);
375 gpio_free(SPI_SCK_GPIO);
376 spi_master_put(master);
377 }
378
379 return status;
380}
381
382static int __exit spi_gpio_remove(struct platform_device *pdev)
383{
384 struct spi_gpio *spi_gpio;
385 struct spi_gpio_platform_data *pdata;
386 int status;
387
388 spi_gpio = platform_get_drvdata(pdev);
389 pdata = pdev->dev.platform_data;
390
391 /* stop() unregisters child devices too */
392 status = spi_bitbang_stop(&spi_gpio->bitbang);
393 spi_master_put(spi_gpio->bitbang.master);
394
395 platform_set_drvdata(pdev, NULL);
396
397 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
398 gpio_free(SPI_MISO_GPIO);
399 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
400 gpio_free(SPI_MOSI_GPIO);
401 gpio_free(SPI_SCK_GPIO);
402
403 return status;
404}
405
406MODULE_ALIAS("platform:" DRIVER_NAME);
407
408static struct platform_driver spi_gpio_driver = {
409 .driver.name = DRIVER_NAME,
410 .driver.owner = THIS_MODULE,
411 .remove = __exit_p(spi_gpio_remove),
412};
413
414static int __init spi_gpio_init(void)
415{
416 return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
417}
418module_init(spi_gpio_init);
419
420static void __exit spi_gpio_exit(void)
421{
422 platform_driver_unregister(&spi_gpio_driver);
423}
424module_exit(spi_gpio_exit);
425
426
427MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
428MODULE_AUTHOR("David Brownell");
429MODULE_LICENSE("GPL");
1/*
2 * SPI master driver using generic bitbanged GPIO
3 *
4 * Copyright (C) 2006,2008 David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 */
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/platform_device.h>
23#include <linux/gpio.h>
24#include <linux/of.h>
25#include <linux/of_device.h>
26#include <linux/of_gpio.h>
27
28#include <linux/spi/spi.h>
29#include <linux/spi/spi_bitbang.h>
30#include <linux/spi/spi_gpio.h>
31
32
33/*
34 * This bitbanging SPI master driver should help make systems usable
35 * when a native hardware SPI engine is not available, perhaps because
36 * its driver isn't yet working or because the I/O pins it requires
37 * are used for other purposes.
38 *
39 * platform_device->driver_data ... points to spi_gpio
40 *
41 * spi->controller_state ... reserved for bitbang framework code
42 * spi->controller_data ... holds chipselect GPIO
43 *
44 * spi->master->dev.driver_data ... points to spi_gpio->bitbang
45 */
46
47struct spi_gpio {
48 struct spi_bitbang bitbang;
49 struct spi_gpio_platform_data pdata;
50 struct platform_device *pdev;
51 int cs_gpios[0];
52};
53
54/*----------------------------------------------------------------------*/
55
56/*
57 * Because the overhead of going through four GPIO procedure calls
58 * per transferred bit can make performance a problem, this code
59 * is set up so that you can use it in either of two ways:
60 *
61 * - The slow generic way: set up platform_data to hold the GPIO
62 * numbers used for MISO/MOSI/SCK, and issue procedure calls for
63 * each of them. This driver can handle several such busses.
64 *
65 * - The quicker inlined way: only helps with platform GPIO code
66 * that inlines operations for constant GPIOs. This can give
67 * you tight (fast!) inner loops, but each such bus needs a
68 * new driver. You'll define a new C file, with Makefile and
69 * Kconfig support; the C code can be a total of six lines:
70 *
71 * #define DRIVER_NAME "myboard_spi2"
72 * #define SPI_MISO_GPIO 119
73 * #define SPI_MOSI_GPIO 120
74 * #define SPI_SCK_GPIO 121
75 * #define SPI_N_CHIPSEL 4
76 * #include "spi-gpio.c"
77 */
78
79#ifndef DRIVER_NAME
80#define DRIVER_NAME "spi_gpio"
81
82#define GENERIC_BITBANG /* vs tight inlines */
83
84/* all functions referencing these symbols must define pdata */
85#define SPI_MISO_GPIO ((pdata)->miso)
86#define SPI_MOSI_GPIO ((pdata)->mosi)
87#define SPI_SCK_GPIO ((pdata)->sck)
88
89#define SPI_N_CHIPSEL ((pdata)->num_chipselect)
90
91#endif
92
93/*----------------------------------------------------------------------*/
94
95static inline struct spi_gpio * __pure
96spi_to_spi_gpio(const struct spi_device *spi)
97{
98 const struct spi_bitbang *bang;
99 struct spi_gpio *spi_gpio;
100
101 bang = spi_master_get_devdata(spi->master);
102 spi_gpio = container_of(bang, struct spi_gpio, bitbang);
103 return spi_gpio;
104}
105
106static inline struct spi_gpio_platform_data * __pure
107spi_to_pdata(const struct spi_device *spi)
108{
109 return &spi_to_spi_gpio(spi)->pdata;
110}
111
112/* this is #defined to avoid unused-variable warnings when inlining */
113#define pdata spi_to_pdata(spi)
114
115static inline void setsck(const struct spi_device *spi, int is_on)
116{
117 gpio_set_value_cansleep(SPI_SCK_GPIO, is_on);
118}
119
120static inline void setmosi(const struct spi_device *spi, int is_on)
121{
122 gpio_set_value_cansleep(SPI_MOSI_GPIO, is_on);
123}
124
125static inline int getmiso(const struct spi_device *spi)
126{
127 return !!gpio_get_value_cansleep(SPI_MISO_GPIO);
128}
129
130#undef pdata
131
132/*
133 * NOTE: this clocks "as fast as we can". It "should" be a function of the
134 * requested device clock. Software overhead means we usually have trouble
135 * reaching even one Mbit/sec (except when we can inline bitops), so for now
136 * we'll just assume we never need additional per-bit slowdowns.
137 */
138#define spidelay(nsecs) do {} while (0)
139
140#include "spi-bitbang-txrx.h"
141
142/*
143 * These functions can leverage inline expansion of GPIO calls to shrink
144 * costs for a txrx bit, often by factors of around ten (by instruction
145 * count). That is particularly visible for larger word sizes, but helps
146 * even with default 8-bit words.
147 *
148 * REVISIT overheads calling these functions for each word also have
149 * significant performance costs. Having txrx_bufs() calls that inline
150 * the txrx_word() logic would help performance, e.g. on larger blocks
151 * used with flash storage or MMC/SD. There should also be ways to make
152 * GCC be less stupid about reloading registers inside the I/O loops,
153 * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
154 */
155
156static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
157 unsigned nsecs, u32 word, u8 bits)
158{
159 return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
160}
161
162static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
163 unsigned nsecs, u32 word, u8 bits)
164{
165 return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
166}
167
168static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
169 unsigned nsecs, u32 word, u8 bits)
170{
171 return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
172}
173
174static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
175 unsigned nsecs, u32 word, u8 bits)
176{
177 return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
178}
179
180/*
181 * These functions do not call setmosi or getmiso if respective flag
182 * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
183 * call when such pin is not present or defined in the controller.
184 * A separate set of callbacks is defined to get highest possible
185 * speed in the generic case (when both MISO and MOSI lines are
186 * available), as optimiser will remove the checks when argument is
187 * constant.
188 */
189
190static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
191 unsigned nsecs, u32 word, u8 bits)
192{
193 unsigned flags = spi->master->flags;
194 return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
195}
196
197static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
198 unsigned nsecs, u32 word, u8 bits)
199{
200 unsigned flags = spi->master->flags;
201 return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
202}
203
204static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
205 unsigned nsecs, u32 word, u8 bits)
206{
207 unsigned flags = spi->master->flags;
208 return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
209}
210
211static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
212 unsigned nsecs, u32 word, u8 bits)
213{
214 unsigned flags = spi->master->flags;
215 return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
216}
217
218/*----------------------------------------------------------------------*/
219
220static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
221{
222 struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
223 unsigned int cs = spi_gpio->cs_gpios[spi->chip_select];
224
225 /* set initial clock polarity */
226 if (is_active)
227 setsck(spi, spi->mode & SPI_CPOL);
228
229 if (cs != SPI_GPIO_NO_CHIPSELECT) {
230 /* SPI is normally active-low */
231 gpio_set_value_cansleep(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
232 }
233}
234
235static int spi_gpio_setup(struct spi_device *spi)
236{
237 unsigned int cs;
238 int status = 0;
239 struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
240 struct device_node *np = spi->master->dev.of_node;
241
242 if (np) {
243 /*
244 * In DT environments, the CS GPIOs have already been
245 * initialized from the "cs-gpios" property of the node.
246 */
247 cs = spi_gpio->cs_gpios[spi->chip_select];
248 } else {
249 /*
250 * ... otherwise, take it from spi->controller_data
251 */
252 cs = (unsigned int)(uintptr_t) spi->controller_data;
253 }
254
255 if (!spi->controller_state) {
256 if (cs != SPI_GPIO_NO_CHIPSELECT) {
257 status = gpio_request(cs, dev_name(&spi->dev));
258 if (status)
259 return status;
260 status = gpio_direction_output(cs,
261 !(spi->mode & SPI_CS_HIGH));
262 }
263 }
264 if (!status) {
265 /* in case it was initialized from static board data */
266 spi_gpio->cs_gpios[spi->chip_select] = cs;
267 status = spi_bitbang_setup(spi);
268 }
269
270 if (status) {
271 if (!spi->controller_state && cs != SPI_GPIO_NO_CHIPSELECT)
272 gpio_free(cs);
273 }
274 return status;
275}
276
277static void spi_gpio_cleanup(struct spi_device *spi)
278{
279 struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
280 unsigned int cs = spi_gpio->cs_gpios[spi->chip_select];
281
282 if (cs != SPI_GPIO_NO_CHIPSELECT)
283 gpio_free(cs);
284 spi_bitbang_cleanup(spi);
285}
286
287static int spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
288{
289 int value;
290
291 value = gpio_request(pin, label);
292 if (value == 0) {
293 if (is_in)
294 value = gpio_direction_input(pin);
295 else
296 value = gpio_direction_output(pin, 0);
297 }
298 return value;
299}
300
301static int spi_gpio_request(struct spi_gpio_platform_data *pdata,
302 const char *label, u16 *res_flags)
303{
304 int value;
305
306 /* NOTE: SPI_*_GPIO symbols may reference "pdata" */
307
308 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
309 value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
310 if (value)
311 goto done;
312 } else {
313 /* HW configuration without MOSI pin */
314 *res_flags |= SPI_MASTER_NO_TX;
315 }
316
317 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
318 value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
319 if (value)
320 goto free_mosi;
321 } else {
322 /* HW configuration without MISO pin */
323 *res_flags |= SPI_MASTER_NO_RX;
324 }
325
326 value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
327 if (value)
328 goto free_miso;
329
330 goto done;
331
332free_miso:
333 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
334 gpio_free(SPI_MISO_GPIO);
335free_mosi:
336 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
337 gpio_free(SPI_MOSI_GPIO);
338done:
339 return value;
340}
341
342#ifdef CONFIG_OF
343static struct of_device_id spi_gpio_dt_ids[] = {
344 { .compatible = "spi-gpio" },
345 {}
346};
347MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids);
348
349static int spi_gpio_probe_dt(struct platform_device *pdev)
350{
351 int ret;
352 u32 tmp;
353 struct spi_gpio_platform_data *pdata;
354 struct device_node *np = pdev->dev.of_node;
355 const struct of_device_id *of_id =
356 of_match_device(spi_gpio_dt_ids, &pdev->dev);
357
358 if (!of_id)
359 return 0;
360
361 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
362 if (!pdata)
363 return -ENOMEM;
364
365 ret = of_get_named_gpio(np, "gpio-sck", 0);
366 if (ret < 0) {
367 dev_err(&pdev->dev, "gpio-sck property not found\n");
368 goto error_free;
369 }
370 pdata->sck = ret;
371
372 ret = of_get_named_gpio(np, "gpio-miso", 0);
373 if (ret < 0) {
374 dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
375 pdata->miso = SPI_GPIO_NO_MISO;
376 } else
377 pdata->miso = ret;
378
379 ret = of_get_named_gpio(np, "gpio-mosi", 0);
380 if (ret < 0) {
381 dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
382 pdata->mosi = SPI_GPIO_NO_MOSI;
383 } else
384 pdata->mosi = ret;
385
386 ret = of_property_read_u32(np, "num-chipselects", &tmp);
387 if (ret < 0) {
388 dev_err(&pdev->dev, "num-chipselects property not found\n");
389 goto error_free;
390 }
391
392 pdata->num_chipselect = tmp;
393 pdev->dev.platform_data = pdata;
394
395 return 1;
396
397error_free:
398 devm_kfree(&pdev->dev, pdata);
399 return ret;
400}
401#else
402static inline int spi_gpio_probe_dt(struct platform_device *pdev)
403{
404 return 0;
405}
406#endif
407
408static int spi_gpio_probe(struct platform_device *pdev)
409{
410 int status;
411 struct spi_master *master;
412 struct spi_gpio *spi_gpio;
413 struct spi_gpio_platform_data *pdata;
414 u16 master_flags = 0;
415 bool use_of = 0;
416
417 status = spi_gpio_probe_dt(pdev);
418 if (status < 0)
419 return status;
420 if (status > 0)
421 use_of = 1;
422
423 pdata = dev_get_platdata(&pdev->dev);
424#ifdef GENERIC_BITBANG
425 if (!pdata || !pdata->num_chipselect)
426 return -ENODEV;
427#endif
428
429 status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
430 if (status < 0)
431 return status;
432
433 master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
434 (sizeof(int) * SPI_N_CHIPSEL));
435 if (!master) {
436 status = -ENOMEM;
437 goto gpio_free;
438 }
439 spi_gpio = spi_master_get_devdata(master);
440 platform_set_drvdata(pdev, spi_gpio);
441
442 spi_gpio->pdev = pdev;
443 if (pdata)
444 spi_gpio->pdata = *pdata;
445
446 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
447 master->flags = master_flags;
448 master->bus_num = pdev->id;
449 master->num_chipselect = SPI_N_CHIPSEL;
450 master->setup = spi_gpio_setup;
451 master->cleanup = spi_gpio_cleanup;
452#ifdef CONFIG_OF
453 master->dev.of_node = pdev->dev.of_node;
454
455 if (use_of) {
456 int i;
457 struct device_node *np = pdev->dev.of_node;
458
459 /*
460 * In DT environments, take the CS GPIO from the "cs-gpios"
461 * property of the node.
462 */
463
464 for (i = 0; i < SPI_N_CHIPSEL; i++)
465 spi_gpio->cs_gpios[i] =
466 of_get_named_gpio(np, "cs-gpios", i);
467 }
468#endif
469
470 spi_gpio->bitbang.master = master;
471 spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
472
473 if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
474 spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
475 spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
476 spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
477 spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
478 } else {
479 spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
480 spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
481 spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
482 spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
483 }
484 spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
485 spi_gpio->bitbang.flags = SPI_CS_HIGH;
486
487 status = spi_bitbang_start(&spi_gpio->bitbang);
488 if (status < 0) {
489gpio_free:
490 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
491 gpio_free(SPI_MISO_GPIO);
492 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
493 gpio_free(SPI_MOSI_GPIO);
494 gpio_free(SPI_SCK_GPIO);
495 spi_master_put(master);
496 }
497
498 return status;
499}
500
501static int spi_gpio_remove(struct platform_device *pdev)
502{
503 struct spi_gpio *spi_gpio;
504 struct spi_gpio_platform_data *pdata;
505
506 spi_gpio = platform_get_drvdata(pdev);
507 pdata = dev_get_platdata(&pdev->dev);
508
509 /* stop() unregisters child devices too */
510 spi_bitbang_stop(&spi_gpio->bitbang);
511
512 if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
513 gpio_free(SPI_MISO_GPIO);
514 if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
515 gpio_free(SPI_MOSI_GPIO);
516 gpio_free(SPI_SCK_GPIO);
517 spi_master_put(spi_gpio->bitbang.master);
518
519 return 0;
520}
521
522MODULE_ALIAS("platform:" DRIVER_NAME);
523
524static struct platform_driver spi_gpio_driver = {
525 .driver = {
526 .name = DRIVER_NAME,
527 .owner = THIS_MODULE,
528 .of_match_table = of_match_ptr(spi_gpio_dt_ids),
529 },
530 .probe = spi_gpio_probe,
531 .remove = spi_gpio_remove,
532};
533module_platform_driver(spi_gpio_driver);
534
535MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
536MODULE_AUTHOR("David Brownell");
537MODULE_LICENSE("GPL");