Loading...
1/*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 */
20
21/*
22 Module: rt2x00usb
23 Abstract: Data structures for the rt2x00usb module.
24 */
25
26#ifndef RT2X00USB_H
27#define RT2X00USB_H
28
29#include <linux/usb.h>
30
31#define to_usb_device_intf(d) \
32({ \
33 struct usb_interface *intf = to_usb_interface(d); \
34 interface_to_usbdev(intf); \
35})
36
37/*
38 * For USB vendor requests we need to pass a timeout
39 * time in ms, for this we use the REGISTER_TIMEOUT,
40 * however when loading firmware a higher value is
41 * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
42 */
43#define REGISTER_TIMEOUT 500
44#define REGISTER_TIMEOUT_FIRMWARE 1000
45
46/**
47 * REGISTER_TIMEOUT16 - Determine the timeout for 16bit register access
48 * @__datalen: Data length
49 */
50#define REGISTER_TIMEOUT16(__datalen) \
51 ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u16)) )
52
53/**
54 * REGISTER_TIMEOUT32 - Determine the timeout for 32bit register access
55 * @__datalen: Data length
56 */
57#define REGISTER_TIMEOUT32(__datalen) \
58 ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u32)) )
59
60/*
61 * Cache size
62 */
63#define CSR_CACHE_SIZE 64
64
65/*
66 * USB request types.
67 */
68#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
69#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST )
70#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST )
71
72/**
73 * enum rt2x00usb_vendor_request: USB vendor commands.
74 */
75enum rt2x00usb_vendor_request {
76 USB_DEVICE_MODE = 1,
77 USB_SINGLE_WRITE = 2,
78 USB_SINGLE_READ = 3,
79 USB_MULTI_WRITE = 6,
80 USB_MULTI_READ = 7,
81 USB_EEPROM_WRITE = 8,
82 USB_EEPROM_READ = 9,
83 USB_LED_CONTROL = 10, /* RT73USB */
84 USB_RX_CONTROL = 12,
85};
86
87/**
88 * enum rt2x00usb_mode_offset: Device modes offset.
89 */
90enum rt2x00usb_mode_offset {
91 USB_MODE_RESET = 1,
92 USB_MODE_UNPLUG = 2,
93 USB_MODE_FUNCTION = 3,
94 USB_MODE_TEST = 4,
95 USB_MODE_SLEEP = 7, /* RT73USB */
96 USB_MODE_FIRMWARE = 8, /* RT73USB */
97 USB_MODE_WAKEUP = 9, /* RT73USB */
98};
99
100/**
101 * rt2x00usb_vendor_request - Send register command to device
102 * @rt2x00dev: Pointer to &struct rt2x00_dev
103 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
104 * @requesttype: Request type &USB_VENDOR_REQUEST_*
105 * @offset: Register offset to perform action on
106 * @value: Value to write to device
107 * @buffer: Buffer where information will be read/written to by device
108 * @buffer_length: Size of &buffer
109 * @timeout: Operation timeout
110 *
111 * This is the main function to communicate with the device,
112 * the &buffer argument _must_ either be NULL or point to
113 * a buffer allocated by kmalloc. Failure to do so can lead
114 * to unexpected behavior depending on the architecture.
115 */
116int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
117 const u8 request, const u8 requesttype,
118 const u16 offset, const u16 value,
119 void *buffer, const u16 buffer_length,
120 const int timeout);
121
122/**
123 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
124 * @rt2x00dev: Pointer to &struct rt2x00_dev
125 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
126 * @requesttype: Request type &USB_VENDOR_REQUEST_*
127 * @offset: Register offset to perform action on
128 * @buffer: Buffer where information will be read/written to by device
129 * @buffer_length: Size of &buffer
130 * @timeout: Operation timeout
131 *
132 * This function will use a previously with kmalloc allocated cache
133 * to communicate with the device. The contents of the buffer pointer
134 * will be copied to this cache when writing, or read from the cache
135 * when reading.
136 * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with
137 * kmalloc. Hence the reason for using a previously allocated cache
138 * which has been allocated properly.
139 */
140int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
141 const u8 request, const u8 requesttype,
142 const u16 offset, void *buffer,
143 const u16 buffer_length, const int timeout);
144
145/**
146 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
147 * @rt2x00dev: Pointer to &struct rt2x00_dev
148 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
149 * @requesttype: Request type &USB_VENDOR_REQUEST_*
150 * @offset: Register offset to perform action on
151 * @buffer: Buffer where information will be read/written to by device
152 * @buffer_length: Size of &buffer
153 * @timeout: Operation timeout
154 *
155 * A version of &rt2x00usb_vendor_request_buff which must be called
156 * if the usb_cache_mutex is already held.
157 */
158int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
159 const u8 request, const u8 requesttype,
160 const u16 offset, void *buffer,
161 const u16 buffer_length, const int timeout);
162
163/**
164 * rt2x00usb_vendor_request_sw - Send single register command to device
165 * @rt2x00dev: Pointer to &struct rt2x00_dev
166 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
167 * @offset: Register offset to perform action on
168 * @value: Value to write to device
169 * @timeout: Operation timeout
170 *
171 * Simple wrapper around rt2x00usb_vendor_request to write a single
172 * command to the device. Since we don't use the buffer argument we
173 * don't have to worry about kmalloc here.
174 */
175static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
176 const u8 request,
177 const u16 offset,
178 const u16 value,
179 const int timeout)
180{
181 return rt2x00usb_vendor_request(rt2x00dev, request,
182 USB_VENDOR_REQUEST_OUT, offset,
183 value, NULL, 0, timeout);
184}
185
186/**
187 * rt2x00usb_eeprom_read - Read eeprom from device
188 * @rt2x00dev: Pointer to &struct rt2x00_dev
189 * @eeprom: Pointer to eeprom array to store the information in
190 * @length: Number of bytes to read from the eeprom
191 *
192 * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
193 * from the device. Note that the eeprom argument _must_ be allocated using
194 * kmalloc for correct handling inside the kernel USB layer.
195 */
196static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
197 __le16 *eeprom, const u16 length)
198{
199 return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
200 USB_VENDOR_REQUEST_IN, 0, 0,
201 eeprom, length,
202 REGISTER_TIMEOUT16(length));
203}
204
205/**
206 * rt2x00usb_register_read - Read 32bit register word
207 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
208 * @offset: Register offset
209 * @value: Pointer to where register contents should be stored
210 *
211 * This function is a simple wrapper for 32bit register access
212 * through rt2x00usb_vendor_request_buff().
213 */
214static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev,
215 const unsigned int offset,
216 u32 *value)
217{
218 __le32 reg;
219 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
220 USB_VENDOR_REQUEST_IN, offset,
221 ®, sizeof(reg), REGISTER_TIMEOUT);
222 *value = le32_to_cpu(reg);
223}
224
225/**
226 * rt2x00usb_register_read_lock - Read 32bit register word
227 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
228 * @offset: Register offset
229 * @value: Pointer to where register contents should be stored
230 *
231 * This function is a simple wrapper for 32bit register access
232 * through rt2x00usb_vendor_req_buff_lock().
233 */
234static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
235 const unsigned int offset,
236 u32 *value)
237{
238 __le32 reg;
239 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
240 USB_VENDOR_REQUEST_IN, offset,
241 ®, sizeof(reg), REGISTER_TIMEOUT);
242 *value = le32_to_cpu(reg);
243}
244
245/**
246 * rt2x00usb_register_multiread - Read 32bit register words
247 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
248 * @offset: Register offset
249 * @value: Pointer to where register contents should be stored
250 * @length: Length of the data
251 *
252 * This function is a simple wrapper for 32bit register access
253 * through rt2x00usb_vendor_request_buff().
254 */
255static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev,
256 const unsigned int offset,
257 void *value, const u32 length)
258{
259 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
260 USB_VENDOR_REQUEST_IN, offset,
261 value, length,
262 REGISTER_TIMEOUT32(length));
263}
264
265/**
266 * rt2x00usb_register_write - Write 32bit register word
267 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
268 * @offset: Register offset
269 * @value: Data which should be written
270 *
271 * This function is a simple wrapper for 32bit register access
272 * through rt2x00usb_vendor_request_buff().
273 */
274static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev,
275 const unsigned int offset,
276 u32 value)
277{
278 __le32 reg = cpu_to_le32(value);
279 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
280 USB_VENDOR_REQUEST_OUT, offset,
281 ®, sizeof(reg), REGISTER_TIMEOUT);
282}
283
284/**
285 * rt2x00usb_register_write_lock - Write 32bit register word
286 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
287 * @offset: Register offset
288 * @value: Data which should be written
289 *
290 * This function is a simple wrapper for 32bit register access
291 * through rt2x00usb_vendor_req_buff_lock().
292 */
293static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
294 const unsigned int offset,
295 u32 value)
296{
297 __le32 reg = cpu_to_le32(value);
298 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
299 USB_VENDOR_REQUEST_OUT, offset,
300 ®, sizeof(reg), REGISTER_TIMEOUT);
301}
302
303/**
304 * rt2x00usb_register_multiwrite - Write 32bit register words
305 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
306 * @offset: Register offset
307 * @value: Data which should be written
308 * @length: Length of the data
309 *
310 * This function is a simple wrapper for 32bit register access
311 * through rt2x00usb_vendor_request_buff().
312 */
313static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
314 const unsigned int offset,
315 const void *value,
316 const u32 length)
317{
318 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
319 USB_VENDOR_REQUEST_OUT, offset,
320 (void *)value, length,
321 REGISTER_TIMEOUT32(length));
322}
323
324/**
325 * rt2x00usb_regbusy_read - Read from register with busy check
326 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
327 * @offset: Register offset
328 * @field: Field to check if register is busy
329 * @reg: Pointer to where register contents should be stored
330 *
331 * This function will read the given register, and checks if the
332 * register is busy. If it is, it will sleep for a couple of
333 * microseconds before reading the register again. If the register
334 * is not read after a certain timeout, this function will return
335 * FALSE.
336 */
337int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
338 const unsigned int offset,
339 const struct rt2x00_field32 field,
340 u32 *reg);
341
342/**
343 * rt2x00usb_register_read_async - Asynchronously read 32bit register word
344 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
345 * @offset: Register offset
346 * @callback: Functon to call when read completes.
347 *
348 * Submit a control URB to read a 32bit register. This safe to
349 * be called from atomic context. The callback will be called
350 * when the URB completes. Otherwise the function is similar
351 * to rt2x00usb_register_read().
352 * When the callback function returns false, the memory will be cleaned up,
353 * when it returns true, the urb will be fired again.
354 */
355void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
356 const unsigned int offset,
357 bool (*callback)(struct rt2x00_dev*, int, u32));
358
359/*
360 * Radio handlers
361 */
362void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
363
364/**
365 * struct queue_entry_priv_usb: Per entry USB specific information
366 *
367 * @urb: Urb structure used for device communication.
368 */
369struct queue_entry_priv_usb {
370 struct urb *urb;
371};
372
373/**
374 * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information
375 *
376 * The first section should match &struct queue_entry_priv_usb exactly.
377 * rt2500usb can use this structure to send a guardian byte when working
378 * with beacons.
379 *
380 * @urb: Urb structure used for device communication.
381 * @guardian_data: Set to 0, used for sending the guardian data.
382 * @guardian_urb: Urb structure used to send the guardian data.
383 */
384struct queue_entry_priv_usb_bcn {
385 struct urb *urb;
386
387 unsigned int guardian_data;
388 struct urb *guardian_urb;
389};
390
391/**
392 * rt2x00usb_kick_queue - Kick data queue
393 * @queue: Data queue to kick
394 *
395 * This will walk through all entries of the queue and push all pending
396 * frames to the hardware as a single burst.
397 */
398void rt2x00usb_kick_queue(struct data_queue *queue);
399
400/**
401 * rt2x00usb_flush_queue - Flush data queue
402 * @queue: Data queue to stop
403 * @drop: True to drop all pending frames.
404 *
405 * This will walk through all entries of the queue and will optionally
406 * kill all URB's which were send to the device, or at least wait until
407 * they have been returned from the device..
408 */
409void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
410
411/**
412 * rt2x00usb_watchdog - Watchdog for USB communication
413 * @rt2x00dev: Pointer to &struct rt2x00_dev
414 *
415 * Check the health of the USB communication and determine
416 * if timeouts have occurred. If this is the case, this function
417 * will reset all communication to restore functionality again.
418 */
419void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
420
421/*
422 * Device initialization handlers.
423 */
424void rt2x00usb_clear_entry(struct queue_entry *entry);
425int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
426void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
427
428/*
429 * USB driver handlers.
430 */
431int rt2x00usb_probe(struct usb_interface *usb_intf,
432 const struct rt2x00_ops *ops);
433void rt2x00usb_disconnect(struct usb_interface *usb_intf);
434#ifdef CONFIG_PM
435int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
436int rt2x00usb_resume(struct usb_interface *usb_intf);
437#else
438#define rt2x00usb_suspend NULL
439#define rt2x00usb_resume NULL
440#endif /* CONFIG_PM */
441
442#endif /* RT2X00USB_H */
1/*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19/*
20 Module: rt2x00usb
21 Abstract: Data structures for the rt2x00usb module.
22 */
23
24#ifndef RT2X00USB_H
25#define RT2X00USB_H
26
27#include <linux/usb.h>
28
29#define to_usb_device_intf(d) \
30({ \
31 struct usb_interface *intf = to_usb_interface(d); \
32 interface_to_usbdev(intf); \
33})
34
35/*
36 * For USB vendor requests we need to pass a timeout
37 * time in ms, for this we use the REGISTER_TIMEOUT,
38 * however when loading firmware a higher value is
39 * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
40 */
41#define REGISTER_TIMEOUT 500
42#define REGISTER_TIMEOUT_FIRMWARE 1000
43
44/**
45 * REGISTER_TIMEOUT16 - Determine the timeout for 16bit register access
46 * @__datalen: Data length
47 */
48#define REGISTER_TIMEOUT16(__datalen) \
49 ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u16)) )
50
51/**
52 * REGISTER_TIMEOUT32 - Determine the timeout for 32bit register access
53 * @__datalen: Data length
54 */
55#define REGISTER_TIMEOUT32(__datalen) \
56 ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u32)) )
57
58/*
59 * Cache size
60 */
61#define CSR_CACHE_SIZE 64
62
63/*
64 * USB request types.
65 */
66#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
67#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST )
68#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST )
69
70/**
71 * enum rt2x00usb_vendor_request: USB vendor commands.
72 */
73enum rt2x00usb_vendor_request {
74 USB_DEVICE_MODE = 1,
75 USB_SINGLE_WRITE = 2,
76 USB_SINGLE_READ = 3,
77 USB_MULTI_WRITE = 6,
78 USB_MULTI_READ = 7,
79 USB_EEPROM_WRITE = 8,
80 USB_EEPROM_READ = 9,
81 USB_LED_CONTROL = 10, /* RT73USB */
82 USB_RX_CONTROL = 12,
83};
84
85/**
86 * enum rt2x00usb_mode_offset: Device modes offset.
87 */
88enum rt2x00usb_mode_offset {
89 USB_MODE_RESET = 1,
90 USB_MODE_UNPLUG = 2,
91 USB_MODE_FUNCTION = 3,
92 USB_MODE_TEST = 4,
93 USB_MODE_SLEEP = 7, /* RT73USB */
94 USB_MODE_FIRMWARE = 8, /* RT73USB */
95 USB_MODE_WAKEUP = 9, /* RT73USB */
96};
97
98/**
99 * rt2x00usb_vendor_request - Send register command to device
100 * @rt2x00dev: Pointer to &struct rt2x00_dev
101 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
102 * @requesttype: Request type &USB_VENDOR_REQUEST_*
103 * @offset: Register offset to perform action on
104 * @value: Value to write to device
105 * @buffer: Buffer where information will be read/written to by device
106 * @buffer_length: Size of &buffer
107 * @timeout: Operation timeout
108 *
109 * This is the main function to communicate with the device,
110 * the &buffer argument _must_ either be NULL or point to
111 * a buffer allocated by kmalloc. Failure to do so can lead
112 * to unexpected behavior depending on the architecture.
113 */
114int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
115 const u8 request, const u8 requesttype,
116 const u16 offset, const u16 value,
117 void *buffer, const u16 buffer_length,
118 const int timeout);
119
120/**
121 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
122 * @rt2x00dev: Pointer to &struct rt2x00_dev
123 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
124 * @requesttype: Request type &USB_VENDOR_REQUEST_*
125 * @offset: Register offset to perform action on
126 * @buffer: Buffer where information will be read/written to by device
127 * @buffer_length: Size of &buffer
128 * @timeout: Operation timeout
129 *
130 * This function will use a previously with kmalloc allocated cache
131 * to communicate with the device. The contents of the buffer pointer
132 * will be copied to this cache when writing, or read from the cache
133 * when reading.
134 * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with
135 * kmalloc. Hence the reason for using a previously allocated cache
136 * which has been allocated properly.
137 */
138int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
139 const u8 request, const u8 requesttype,
140 const u16 offset, void *buffer,
141 const u16 buffer_length, const int timeout);
142
143/**
144 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
145 * @rt2x00dev: Pointer to &struct rt2x00_dev
146 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
147 * @requesttype: Request type &USB_VENDOR_REQUEST_*
148 * @offset: Register offset to perform action on
149 * @buffer: Buffer where information will be read/written to by device
150 * @buffer_length: Size of &buffer
151 * @timeout: Operation timeout
152 *
153 * A version of &rt2x00usb_vendor_request_buff which must be called
154 * if the usb_cache_mutex is already held.
155 */
156int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
157 const u8 request, const u8 requesttype,
158 const u16 offset, void *buffer,
159 const u16 buffer_length, const int timeout);
160
161/**
162 * rt2x00usb_vendor_request_sw - Send single register command to device
163 * @rt2x00dev: Pointer to &struct rt2x00_dev
164 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
165 * @offset: Register offset to perform action on
166 * @value: Value to write to device
167 * @timeout: Operation timeout
168 *
169 * Simple wrapper around rt2x00usb_vendor_request to write a single
170 * command to the device. Since we don't use the buffer argument we
171 * don't have to worry about kmalloc here.
172 */
173static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
174 const u8 request,
175 const u16 offset,
176 const u16 value,
177 const int timeout)
178{
179 return rt2x00usb_vendor_request(rt2x00dev, request,
180 USB_VENDOR_REQUEST_OUT, offset,
181 value, NULL, 0, timeout);
182}
183
184/**
185 * rt2x00usb_eeprom_read - Read eeprom from device
186 * @rt2x00dev: Pointer to &struct rt2x00_dev
187 * @eeprom: Pointer to eeprom array to store the information in
188 * @length: Number of bytes to read from the eeprom
189 *
190 * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
191 * from the device. Note that the eeprom argument _must_ be allocated using
192 * kmalloc for correct handling inside the kernel USB layer.
193 */
194static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
195 __le16 *eeprom, const u16 length)
196{
197 return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
198 USB_VENDOR_REQUEST_IN, 0, 0,
199 eeprom, length,
200 REGISTER_TIMEOUT16(length));
201}
202
203/**
204 * rt2x00usb_register_read - Read 32bit register word
205 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
206 * @offset: Register offset
207 * @value: Pointer to where register contents should be stored
208 *
209 * This function is a simple wrapper for 32bit register access
210 * through rt2x00usb_vendor_request_buff().
211 */
212static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev,
213 const unsigned int offset,
214 u32 *value)
215{
216 __le32 reg;
217 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
218 USB_VENDOR_REQUEST_IN, offset,
219 ®, sizeof(reg), REGISTER_TIMEOUT);
220 *value = le32_to_cpu(reg);
221}
222
223/**
224 * rt2x00usb_register_read_lock - Read 32bit register word
225 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
226 * @offset: Register offset
227 * @value: Pointer to where register contents should be stored
228 *
229 * This function is a simple wrapper for 32bit register access
230 * through rt2x00usb_vendor_req_buff_lock().
231 */
232static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
233 const unsigned int offset,
234 u32 *value)
235{
236 __le32 reg;
237 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
238 USB_VENDOR_REQUEST_IN, offset,
239 ®, sizeof(reg), REGISTER_TIMEOUT);
240 *value = le32_to_cpu(reg);
241}
242
243/**
244 * rt2x00usb_register_multiread - Read 32bit register words
245 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
246 * @offset: Register offset
247 * @value: Pointer to where register contents should be stored
248 * @length: Length of the data
249 *
250 * This function is a simple wrapper for 32bit register access
251 * through rt2x00usb_vendor_request_buff().
252 */
253static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev,
254 const unsigned int offset,
255 void *value, const u32 length)
256{
257 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
258 USB_VENDOR_REQUEST_IN, offset,
259 value, length,
260 REGISTER_TIMEOUT32(length));
261}
262
263/**
264 * rt2x00usb_register_write - Write 32bit register word
265 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
266 * @offset: Register offset
267 * @value: Data which should be written
268 *
269 * This function is a simple wrapper for 32bit register access
270 * through rt2x00usb_vendor_request_buff().
271 */
272static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev,
273 const unsigned int offset,
274 u32 value)
275{
276 __le32 reg = cpu_to_le32(value);
277 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
278 USB_VENDOR_REQUEST_OUT, offset,
279 ®, sizeof(reg), REGISTER_TIMEOUT);
280}
281
282/**
283 * rt2x00usb_register_write_lock - Write 32bit register word
284 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
285 * @offset: Register offset
286 * @value: Data which should be written
287 *
288 * This function is a simple wrapper for 32bit register access
289 * through rt2x00usb_vendor_req_buff_lock().
290 */
291static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
292 const unsigned int offset,
293 u32 value)
294{
295 __le32 reg = cpu_to_le32(value);
296 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
297 USB_VENDOR_REQUEST_OUT, offset,
298 ®, sizeof(reg), REGISTER_TIMEOUT);
299}
300
301/**
302 * rt2x00usb_register_multiwrite - Write 32bit register words
303 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
304 * @offset: Register offset
305 * @value: Data which should be written
306 * @length: Length of the data
307 *
308 * This function is a simple wrapper for 32bit register access
309 * through rt2x00usb_vendor_request_buff().
310 */
311static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
312 const unsigned int offset,
313 const void *value,
314 const u32 length)
315{
316 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
317 USB_VENDOR_REQUEST_OUT, offset,
318 (void *)value, length,
319 REGISTER_TIMEOUT32(length));
320}
321
322/**
323 * rt2x00usb_regbusy_read - Read from register with busy check
324 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
325 * @offset: Register offset
326 * @field: Field to check if register is busy
327 * @reg: Pointer to where register contents should be stored
328 *
329 * This function will read the given register, and checks if the
330 * register is busy. If it is, it will sleep for a couple of
331 * microseconds before reading the register again. If the register
332 * is not read after a certain timeout, this function will return
333 * FALSE.
334 */
335int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
336 const unsigned int offset,
337 const struct rt2x00_field32 field,
338 u32 *reg);
339
340/**
341 * rt2x00usb_register_read_async - Asynchronously read 32bit register word
342 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
343 * @offset: Register offset
344 * @callback: Functon to call when read completes.
345 *
346 * Submit a control URB to read a 32bit register. This safe to
347 * be called from atomic context. The callback will be called
348 * when the URB completes. Otherwise the function is similar
349 * to rt2x00usb_register_read().
350 * When the callback function returns false, the memory will be cleaned up,
351 * when it returns true, the urb will be fired again.
352 */
353void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
354 const unsigned int offset,
355 bool (*callback)(struct rt2x00_dev*, int, u32));
356
357/*
358 * Radio handlers
359 */
360void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
361
362/**
363 * struct queue_entry_priv_usb: Per entry USB specific information
364 *
365 * @urb: Urb structure used for device communication.
366 */
367struct queue_entry_priv_usb {
368 struct urb *urb;
369};
370
371/**
372 * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information
373 *
374 * The first section should match &struct queue_entry_priv_usb exactly.
375 * rt2500usb can use this structure to send a guardian byte when working
376 * with beacons.
377 *
378 * @urb: Urb structure used for device communication.
379 * @guardian_data: Set to 0, used for sending the guardian data.
380 * @guardian_urb: Urb structure used to send the guardian data.
381 */
382struct queue_entry_priv_usb_bcn {
383 struct urb *urb;
384
385 unsigned int guardian_data;
386 struct urb *guardian_urb;
387};
388
389/**
390 * rt2x00usb_kick_queue - Kick data queue
391 * @queue: Data queue to kick
392 *
393 * This will walk through all entries of the queue and push all pending
394 * frames to the hardware as a single burst.
395 */
396void rt2x00usb_kick_queue(struct data_queue *queue);
397
398/**
399 * rt2x00usb_flush_queue - Flush data queue
400 * @queue: Data queue to stop
401 * @drop: True to drop all pending frames.
402 *
403 * This will walk through all entries of the queue and will optionally
404 * kill all URB's which were send to the device, or at least wait until
405 * they have been returned from the device..
406 */
407void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
408
409/**
410 * rt2x00usb_watchdog - Watchdog for USB communication
411 * @rt2x00dev: Pointer to &struct rt2x00_dev
412 *
413 * Check the health of the USB communication and determine
414 * if timeouts have occurred. If this is the case, this function
415 * will reset all communication to restore functionality again.
416 */
417void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
418
419/*
420 * Device initialization handlers.
421 */
422void rt2x00usb_clear_entry(struct queue_entry *entry);
423int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
424void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
425
426/*
427 * USB driver handlers.
428 */
429int rt2x00usb_probe(struct usb_interface *usb_intf,
430 const struct rt2x00_ops *ops);
431void rt2x00usb_disconnect(struct usb_interface *usb_intf);
432#ifdef CONFIG_PM
433int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
434int rt2x00usb_resume(struct usb_interface *usb_intf);
435#else
436#define rt2x00usb_suspend NULL
437#define rt2x00usb_resume NULL
438#endif /* CONFIG_PM */
439
440#endif /* RT2X00USB_H */