Loading...
1/*
2 * Atheros CARL9170 driver
3 *
4 * USB - frontend
5 *
6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; see the file COPYING. If not, see
21 * http://www.gnu.org/licenses/.
22 *
23 * This file incorporates work covered by the following copyright and
24 * permission notice:
25 * Copyright (c) 2007-2008 Atheros Communications, Inc.
26 *
27 * Permission to use, copy, modify, and/or distribute this software for any
28 * purpose with or without fee is hereby granted, provided that the above
29 * copyright notice and this permission notice appear in all copies.
30 *
31 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
32 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
33 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
34 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
35 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
36 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
37 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
38 */
39
40#include <linux/module.h>
41#include <linux/slab.h>
42#include <linux/usb.h>
43#include <linux/firmware.h>
44#include <linux/etherdevice.h>
45#include <linux/device.h>
46#include <net/mac80211.h>
47#include "carl9170.h"
48#include "cmd.h"
49#include "hw.h"
50#include "fwcmd.h"
51
52MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
53MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
54MODULE_LICENSE("GPL");
55MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
56MODULE_FIRMWARE(CARL9170FW_NAME);
57MODULE_ALIAS("ar9170usb");
58MODULE_ALIAS("arusb_lnx");
59
60/*
61 * Note:
62 *
63 * Always update our wiki's device list (located at:
64 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
65 * whenever you add a new device.
66 */
67static struct usb_device_id carl9170_usb_ids[] = {
68 /* Atheros 9170 */
69 { USB_DEVICE(0x0cf3, 0x9170) },
70 /* Atheros TG121N */
71 { USB_DEVICE(0x0cf3, 0x1001) },
72 /* TP-Link TL-WN821N v2 */
73 { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
74 CARL9170_ONE_LED },
75 /* 3Com Dual Band 802.11n USB Adapter */
76 { USB_DEVICE(0x0cf3, 0x1010) },
77 /* H3C Dual Band 802.11n USB Adapter */
78 { USB_DEVICE(0x0cf3, 0x1011) },
79 /* Cace Airpcap NX */
80 { USB_DEVICE(0xcace, 0x0300) },
81 /* D-Link DWA 160 A1 */
82 { USB_DEVICE(0x07d1, 0x3c10) },
83 /* D-Link DWA 160 A2 */
84 { USB_DEVICE(0x07d1, 0x3a09) },
85 /* D-Link DWA 130 D */
86 { USB_DEVICE(0x07d1, 0x3a0f) },
87 /* Netgear WNA1000 */
88 { USB_DEVICE(0x0846, 0x9040) },
89 /* Netgear WNDA3100 (v1) */
90 { USB_DEVICE(0x0846, 0x9010) },
91 /* Netgear WN111 v2 */
92 { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
93 /* Zydas ZD1221 */
94 { USB_DEVICE(0x0ace, 0x1221) },
95 /* Proxim ORiNOCO 802.11n USB */
96 { USB_DEVICE(0x1435, 0x0804) },
97 /* WNC Generic 11n USB Dongle */
98 { USB_DEVICE(0x1435, 0x0326) },
99 /* ZyXEL NWD271N */
100 { USB_DEVICE(0x0586, 0x3417) },
101 /* Z-Com UB81 BG */
102 { USB_DEVICE(0x0cde, 0x0023) },
103 /* Z-Com UB82 ABG */
104 { USB_DEVICE(0x0cde, 0x0026) },
105 /* Sphairon Homelink 1202 */
106 { USB_DEVICE(0x0cde, 0x0027) },
107 /* Arcadyan WN7512 */
108 { USB_DEVICE(0x083a, 0xf522) },
109 /* Planex GWUS300 */
110 { USB_DEVICE(0x2019, 0x5304) },
111 /* IO-Data WNGDNUS2 */
112 { USB_DEVICE(0x04bb, 0x093f) },
113 /* NEC WL300NU-G */
114 { USB_DEVICE(0x0409, 0x0249) },
115 /* NEC WL300NU-AG */
116 { USB_DEVICE(0x0409, 0x02b4) },
117 /* AVM FRITZ!WLAN USB Stick N */
118 { USB_DEVICE(0x057c, 0x8401) },
119 /* AVM FRITZ!WLAN USB Stick N 2.4 */
120 { USB_DEVICE(0x057c, 0x8402) },
121 /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
122 { USB_DEVICE(0x1668, 0x1200) },
123 /* Airlive X.USB a/b/g/n */
124 { USB_DEVICE(0x1b75, 0x9170) },
125
126 /* terminate */
127 {}
128};
129MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);
130
131static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
132{
133 struct urb *urb;
134 int err;
135
136 if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS)
137 goto err_acc;
138
139 urb = usb_get_from_anchor(&ar->tx_wait);
140 if (!urb)
141 goto err_acc;
142
143 usb_anchor_urb(urb, &ar->tx_anch);
144
145 err = usb_submit_urb(urb, GFP_ATOMIC);
146 if (unlikely(err)) {
147 if (net_ratelimit()) {
148 dev_err(&ar->udev->dev, "tx submit failed (%d)\n",
149 urb->status);
150 }
151
152 usb_unanchor_urb(urb);
153 usb_anchor_urb(urb, &ar->tx_err);
154 }
155
156 usb_free_urb(urb);
157
158 if (likely(err == 0))
159 return;
160
161err_acc:
162 atomic_dec(&ar->tx_anch_urbs);
163}
164
165static void carl9170_usb_tx_data_complete(struct urb *urb)
166{
167 struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
168
169 if (WARN_ON_ONCE(!ar)) {
170 dev_kfree_skb_irq(urb->context);
171 return;
172 }
173
174 atomic_dec(&ar->tx_anch_urbs);
175
176 switch (urb->status) {
177 /* everything is fine */
178 case 0:
179 carl9170_tx_callback(ar, (void *)urb->context);
180 break;
181
182 /* disconnect */
183 case -ENOENT:
184 case -ECONNRESET:
185 case -ENODEV:
186 case -ESHUTDOWN:
187 /*
188 * Defer the frame clean-up to the tasklet worker.
189 * This is necessary, because carl9170_tx_drop
190 * does not work in an irqsave context.
191 */
192 usb_anchor_urb(urb, &ar->tx_err);
193 return;
194
195 /* a random transmission error has occurred? */
196 default:
197 if (net_ratelimit()) {
198 dev_err(&ar->udev->dev, "tx failed (%d)\n",
199 urb->status);
200 }
201
202 usb_anchor_urb(urb, &ar->tx_err);
203 break;
204 }
205
206 if (likely(IS_STARTED(ar)))
207 carl9170_usb_submit_data_urb(ar);
208}
209
210static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar)
211{
212 struct urb *urb;
213 int err;
214
215 if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) {
216 atomic_dec(&ar->tx_cmd_urbs);
217 return 0;
218 }
219
220 urb = usb_get_from_anchor(&ar->tx_cmd);
221 if (!urb) {
222 atomic_dec(&ar->tx_cmd_urbs);
223 return 0;
224 }
225
226 usb_anchor_urb(urb, &ar->tx_anch);
227 err = usb_submit_urb(urb, GFP_ATOMIC);
228 if (unlikely(err)) {
229 usb_unanchor_urb(urb);
230 atomic_dec(&ar->tx_cmd_urbs);
231 }
232 usb_free_urb(urb);
233
234 return err;
235}
236
237static void carl9170_usb_cmd_complete(struct urb *urb)
238{
239 struct ar9170 *ar = urb->context;
240 int err = 0;
241
242 if (WARN_ON_ONCE(!ar))
243 return;
244
245 atomic_dec(&ar->tx_cmd_urbs);
246
247 switch (urb->status) {
248 /* everything is fine */
249 case 0:
250 break;
251
252 /* disconnect */
253 case -ENOENT:
254 case -ECONNRESET:
255 case -ENODEV:
256 case -ESHUTDOWN:
257 return;
258
259 default:
260 err = urb->status;
261 break;
262 }
263
264 if (!IS_INITIALIZED(ar))
265 return;
266
267 if (err)
268 dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err);
269
270 err = carl9170_usb_submit_cmd_urb(ar);
271 if (err)
272 dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err);
273}
274
275static void carl9170_usb_rx_irq_complete(struct urb *urb)
276{
277 struct ar9170 *ar = urb->context;
278
279 if (WARN_ON_ONCE(!ar))
280 return;
281
282 switch (urb->status) {
283 /* everything is fine */
284 case 0:
285 break;
286
287 /* disconnect */
288 case -ENOENT:
289 case -ECONNRESET:
290 case -ENODEV:
291 case -ESHUTDOWN:
292 return;
293
294 default:
295 goto resubmit;
296 }
297
298 carl9170_handle_command_response(ar, urb->transfer_buffer,
299 urb->actual_length);
300
301resubmit:
302 usb_anchor_urb(urb, &ar->rx_anch);
303 if (unlikely(usb_submit_urb(urb, GFP_ATOMIC)))
304 usb_unanchor_urb(urb);
305}
306
307static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp)
308{
309 struct urb *urb;
310 int err = 0, runs = 0;
311
312 while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) &&
313 (runs++ < AR9170_NUM_RX_URBS)) {
314 err = -ENOSPC;
315 urb = usb_get_from_anchor(&ar->rx_pool);
316 if (urb) {
317 usb_anchor_urb(urb, &ar->rx_anch);
318 err = usb_submit_urb(urb, gfp);
319 if (unlikely(err)) {
320 usb_unanchor_urb(urb);
321 usb_anchor_urb(urb, &ar->rx_pool);
322 } else {
323 atomic_dec(&ar->rx_pool_urbs);
324 atomic_inc(&ar->rx_anch_urbs);
325 }
326 usb_free_urb(urb);
327 }
328 }
329
330 return err;
331}
332
333static void carl9170_usb_rx_work(struct ar9170 *ar)
334{
335 struct urb *urb;
336 int i;
337
338 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
339 urb = usb_get_from_anchor(&ar->rx_work);
340 if (!urb)
341 break;
342
343 atomic_dec(&ar->rx_work_urbs);
344 if (IS_INITIALIZED(ar)) {
345 carl9170_rx(ar, urb->transfer_buffer,
346 urb->actual_length);
347 }
348
349 usb_anchor_urb(urb, &ar->rx_pool);
350 atomic_inc(&ar->rx_pool_urbs);
351
352 usb_free_urb(urb);
353
354 carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
355 }
356}
357
358void carl9170_usb_handle_tx_err(struct ar9170 *ar)
359{
360 struct urb *urb;
361
362 while ((urb = usb_get_from_anchor(&ar->tx_err))) {
363 struct sk_buff *skb = (void *)urb->context;
364
365 carl9170_tx_drop(ar, skb);
366 carl9170_tx_callback(ar, skb);
367 usb_free_urb(urb);
368 }
369}
370
371static void carl9170_usb_tasklet(unsigned long data)
372{
373 struct ar9170 *ar = (struct ar9170 *) data;
374
375 if (!IS_INITIALIZED(ar))
376 return;
377
378 carl9170_usb_rx_work(ar);
379
380 /*
381 * Strictly speaking: The tx scheduler is not part of the USB system.
382 * But the rx worker returns frames back to the mac80211-stack and
383 * this is the _perfect_ place to generate the next transmissions.
384 */
385 if (IS_STARTED(ar))
386 carl9170_tx_scheduler(ar);
387}
388
389static void carl9170_usb_rx_complete(struct urb *urb)
390{
391 struct ar9170 *ar = (struct ar9170 *)urb->context;
392 int err;
393
394 if (WARN_ON_ONCE(!ar))
395 return;
396
397 atomic_dec(&ar->rx_anch_urbs);
398
399 switch (urb->status) {
400 case 0:
401 /* rx path */
402 usb_anchor_urb(urb, &ar->rx_work);
403 atomic_inc(&ar->rx_work_urbs);
404 break;
405
406 case -ENOENT:
407 case -ECONNRESET:
408 case -ENODEV:
409 case -ESHUTDOWN:
410 /* handle disconnect events*/
411 return;
412
413 default:
414 /* handle all other errors */
415 usb_anchor_urb(urb, &ar->rx_pool);
416 atomic_inc(&ar->rx_pool_urbs);
417 break;
418 }
419
420 err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
421 if (unlikely(err)) {
422 /*
423 * usb_submit_rx_urb reported a problem.
424 * In case this is due to a rx buffer shortage,
425 * elevate the tasklet worker priority to
426 * the highest available level.
427 */
428 tasklet_hi_schedule(&ar->usb_tasklet);
429
430 if (atomic_read(&ar->rx_anch_urbs) == 0) {
431 /*
432 * The system is too slow to cope with
433 * the enormous workload. We have simply
434 * run out of active rx urbs and this
435 * unfortunately leads to an unpredictable
436 * device.
437 */
438
439 ieee80211_queue_work(ar->hw, &ar->ping_work);
440 }
441 } else {
442 /*
443 * Using anything less than _high_ priority absolutely
444 * kills the rx performance my UP-System...
445 */
446 tasklet_hi_schedule(&ar->usb_tasklet);
447 }
448}
449
450static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp)
451{
452 struct urb *urb;
453 void *buf;
454
455 buf = kmalloc(ar->fw.rx_size, gfp);
456 if (!buf)
457 return NULL;
458
459 urb = usb_alloc_urb(0, gfp);
460 if (!urb) {
461 kfree(buf);
462 return NULL;
463 }
464
465 usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev,
466 AR9170_USB_EP_RX), buf, ar->fw.rx_size,
467 carl9170_usb_rx_complete, ar);
468
469 urb->transfer_flags |= URB_FREE_BUFFER;
470
471 return urb;
472}
473
474static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar)
475{
476 struct urb *urb = NULL;
477 void *ibuf;
478 int err = -ENOMEM;
479
480 urb = usb_alloc_urb(0, GFP_KERNEL);
481 if (!urb)
482 goto out;
483
484 ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL);
485 if (!ibuf)
486 goto out;
487
488 usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev,
489 AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX,
490 carl9170_usb_rx_irq_complete, ar, 1);
491
492 urb->transfer_flags |= URB_FREE_BUFFER;
493
494 usb_anchor_urb(urb, &ar->rx_anch);
495 err = usb_submit_urb(urb, GFP_KERNEL);
496 if (err)
497 usb_unanchor_urb(urb);
498
499out:
500 usb_free_urb(urb);
501 return err;
502}
503
504static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar)
505{
506 struct urb *urb;
507 int i, err = -EINVAL;
508
509 /*
510 * The driver actively maintains a second shadow
511 * pool for inactive, but fully-prepared rx urbs.
512 *
513 * The pool should help the driver to master huge
514 * workload spikes without running the risk of
515 * undersupplying the hardware or wasting time by
516 * processing rx data (streams) inside the urb
517 * completion (hardirq context).
518 */
519 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
520 urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL);
521 if (!urb) {
522 err = -ENOMEM;
523 goto err_out;
524 }
525
526 usb_anchor_urb(urb, &ar->rx_pool);
527 atomic_inc(&ar->rx_pool_urbs);
528 usb_free_urb(urb);
529 }
530
531 err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL);
532 if (err)
533 goto err_out;
534
535 /* the device now waiting for the firmware. */
536 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
537 return 0;
538
539err_out:
540
541 usb_scuttle_anchored_urbs(&ar->rx_pool);
542 usb_scuttle_anchored_urbs(&ar->rx_work);
543 usb_kill_anchored_urbs(&ar->rx_anch);
544 return err;
545}
546
547static int carl9170_usb_flush(struct ar9170 *ar)
548{
549 struct urb *urb;
550 int ret, err = 0;
551
552 while ((urb = usb_get_from_anchor(&ar->tx_wait))) {
553 struct sk_buff *skb = (void *)urb->context;
554 carl9170_tx_drop(ar, skb);
555 carl9170_tx_callback(ar, skb);
556 usb_free_urb(urb);
557 }
558
559 ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
560 if (ret == 0)
561 err = -ETIMEDOUT;
562
563 /* lets wait a while until the tx - queues are dried out */
564 ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
565 if (ret == 0)
566 err = -ETIMEDOUT;
567
568 usb_kill_anchored_urbs(&ar->tx_anch);
569 carl9170_usb_handle_tx_err(ar);
570
571 return err;
572}
573
574static void carl9170_usb_cancel_urbs(struct ar9170 *ar)
575{
576 int err;
577
578 carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);
579
580 err = carl9170_usb_flush(ar);
581 if (err)
582 dev_err(&ar->udev->dev, "stuck tx urbs!\n");
583
584 usb_poison_anchored_urbs(&ar->tx_anch);
585 carl9170_usb_handle_tx_err(ar);
586 usb_poison_anchored_urbs(&ar->rx_anch);
587
588 tasklet_kill(&ar->usb_tasklet);
589
590 usb_scuttle_anchored_urbs(&ar->rx_work);
591 usb_scuttle_anchored_urbs(&ar->rx_pool);
592 usb_scuttle_anchored_urbs(&ar->tx_cmd);
593}
594
595int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
596 const bool free_buf)
597{
598 struct urb *urb;
599 int err = 0;
600
601 if (!IS_INITIALIZED(ar)) {
602 err = -EPERM;
603 goto err_free;
604 }
605
606 if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) {
607 err = -EINVAL;
608 goto err_free;
609 }
610
611 urb = usb_alloc_urb(0, GFP_ATOMIC);
612 if (!urb) {
613 err = -ENOMEM;
614 goto err_free;
615 }
616
617 usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
618 AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
619 carl9170_usb_cmd_complete, ar, 1);
620
621 if (free_buf)
622 urb->transfer_flags |= URB_FREE_BUFFER;
623
624 usb_anchor_urb(urb, &ar->tx_cmd);
625 usb_free_urb(urb);
626
627 return carl9170_usb_submit_cmd_urb(ar);
628
629err_free:
630 if (free_buf)
631 kfree(cmd);
632
633 return err;
634}
635
636int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd,
637 unsigned int plen, void *payload, unsigned int outlen, void *out)
638{
639 int err = -ENOMEM;
640
641 if (!IS_ACCEPTING_CMD(ar))
642 return -EIO;
643
644 if (!(cmd & CARL9170_CMD_ASYNC_FLAG))
645 might_sleep();
646
647 ar->cmd.hdr.len = plen;
648 ar->cmd.hdr.cmd = cmd;
649 /* writing multiple regs fills this buffer already */
650 if (plen && payload != (u8 *)(ar->cmd.data))
651 memcpy(ar->cmd.data, payload, plen);
652
653 spin_lock_bh(&ar->cmd_lock);
654 ar->readbuf = (u8 *)out;
655 ar->readlen = outlen;
656 spin_unlock_bh(&ar->cmd_lock);
657
658 err = __carl9170_exec_cmd(ar, &ar->cmd, false);
659
660 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) {
661 err = wait_for_completion_timeout(&ar->cmd_wait, HZ);
662 if (err == 0) {
663 err = -ETIMEDOUT;
664 goto err_unbuf;
665 }
666
667 if (ar->readlen != outlen) {
668 err = -EMSGSIZE;
669 goto err_unbuf;
670 }
671 }
672
673 return 0;
674
675err_unbuf:
676 /* Maybe the device was removed in the moment we were waiting? */
677 if (IS_STARTED(ar)) {
678 dev_err(&ar->udev->dev, "no command feedback "
679 "received (%d).\n", err);
680
681 /* provide some maybe useful debug information */
682 print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE,
683 &ar->cmd, plen + 4);
684
685 carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT);
686 }
687
688 /* invalidate to avoid completing the next command prematurely */
689 spin_lock_bh(&ar->cmd_lock);
690 ar->readbuf = NULL;
691 ar->readlen = 0;
692 spin_unlock_bh(&ar->cmd_lock);
693
694 return err;
695}
696
697void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
698{
699 struct urb *urb;
700 struct ar9170_stream *tx_stream;
701 void *data;
702 unsigned int len;
703
704 if (!IS_STARTED(ar))
705 goto err_drop;
706
707 urb = usb_alloc_urb(0, GFP_ATOMIC);
708 if (!urb)
709 goto err_drop;
710
711 if (ar->fw.tx_stream) {
712 tx_stream = (void *) (skb->data - sizeof(*tx_stream));
713
714 len = skb->len + sizeof(*tx_stream);
715 tx_stream->length = cpu_to_le16(len);
716 tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG);
717 data = tx_stream;
718 } else {
719 data = skb->data;
720 len = skb->len;
721 }
722
723 usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev,
724 AR9170_USB_EP_TX), data, len,
725 carl9170_usb_tx_data_complete, skb);
726
727 urb->transfer_flags |= URB_ZERO_PACKET;
728
729 usb_anchor_urb(urb, &ar->tx_wait);
730
731 usb_free_urb(urb);
732
733 carl9170_usb_submit_data_urb(ar);
734 return;
735
736err_drop:
737 carl9170_tx_drop(ar, skb);
738 carl9170_tx_callback(ar, skb);
739}
740
741static void carl9170_release_firmware(struct ar9170 *ar)
742{
743 if (ar->fw.fw) {
744 release_firmware(ar->fw.fw);
745 memset(&ar->fw, 0, sizeof(ar->fw));
746 }
747}
748
749void carl9170_usb_stop(struct ar9170 *ar)
750{
751 int ret;
752
753 carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED);
754
755 ret = carl9170_usb_flush(ar);
756 if (ret)
757 dev_err(&ar->udev->dev, "kill pending tx urbs.\n");
758
759 usb_poison_anchored_urbs(&ar->tx_anch);
760 carl9170_usb_handle_tx_err(ar);
761
762 /* kill any pending command */
763 spin_lock_bh(&ar->cmd_lock);
764 ar->readlen = 0;
765 spin_unlock_bh(&ar->cmd_lock);
766 complete_all(&ar->cmd_wait);
767
768 /* This is required to prevent an early completion on _start */
769 INIT_COMPLETION(ar->cmd_wait);
770
771 /*
772 * Note:
773 * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
774 * Else we would end up with a unresponsive device...
775 */
776}
777
778int carl9170_usb_open(struct ar9170 *ar)
779{
780 usb_unpoison_anchored_urbs(&ar->tx_anch);
781
782 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
783 return 0;
784}
785
786static int carl9170_usb_load_firmware(struct ar9170 *ar)
787{
788 const u8 *data;
789 u8 *buf;
790 unsigned int transfer;
791 size_t len;
792 u32 addr;
793 int err = 0;
794
795 buf = kmalloc(4096, GFP_KERNEL);
796 if (!buf) {
797 err = -ENOMEM;
798 goto err_out;
799 }
800
801 data = ar->fw.fw->data;
802 len = ar->fw.fw->size;
803 addr = ar->fw.address;
804
805 /* this removes the miniboot image */
806 data += ar->fw.offset;
807 len -= ar->fw.offset;
808
809 while (len) {
810 transfer = min_t(unsigned int, len, 4096u);
811 memcpy(buf, data, transfer);
812
813 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
814 0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
815 addr >> 8, 0, buf, transfer, 100);
816
817 if (err < 0) {
818 kfree(buf);
819 goto err_out;
820 }
821
822 len -= transfer;
823 data += transfer;
824 addr += transfer;
825 }
826 kfree(buf);
827
828 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
829 0x31 /* FW DL COMPLETE */,
830 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200);
831
832 if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) {
833 err = -ETIMEDOUT;
834 goto err_out;
835 }
836
837 err = carl9170_echo_test(ar, 0x4a110123);
838 if (err)
839 goto err_out;
840
841 /* now, start the command response counter */
842 ar->cmd_seq = -1;
843
844 return 0;
845
846err_out:
847 dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err);
848 return err;
849}
850
851int carl9170_usb_restart(struct ar9170 *ar)
852{
853 int err = 0;
854
855 if (ar->intf->condition != USB_INTERFACE_BOUND)
856 return 0;
857
858 /*
859 * Disable the command response sequence counter check.
860 * We already know that the device/firmware is in a bad state.
861 * So, no extra points are awarded to anyone who reminds the
862 * driver about that.
863 */
864 ar->cmd_seq = -2;
865
866 err = carl9170_reboot(ar);
867
868 carl9170_usb_stop(ar);
869
870 if (err)
871 goto err_out;
872
873 tasklet_schedule(&ar->usb_tasklet);
874
875 /* The reboot procedure can take quite a while to complete. */
876 msleep(1100);
877
878 err = carl9170_usb_open(ar);
879 if (err)
880 goto err_out;
881
882 err = carl9170_usb_load_firmware(ar);
883 if (err)
884 goto err_out;
885
886 return 0;
887
888err_out:
889 carl9170_usb_cancel_urbs(ar);
890 return err;
891}
892
893void carl9170_usb_reset(struct ar9170 *ar)
894{
895 /*
896 * This is the last resort to get the device going again
897 * without any *user replugging action*.
898 *
899 * But there is a catch: usb_reset really is like a physical
900 * *reconnect*. The mac80211 state will be lost in the process.
901 * Therefore a userspace application, which is monitoring
902 * the link must step in.
903 */
904 carl9170_usb_cancel_urbs(ar);
905
906 carl9170_usb_stop(ar);
907
908 usb_queue_reset_device(ar->intf);
909}
910
911static int carl9170_usb_init_device(struct ar9170 *ar)
912{
913 int err;
914
915 /*
916 * The carl9170 firmware let's the driver know when it's
917 * ready for action. But we have to be prepared to gracefully
918 * handle all spurious [flushed] messages after each (re-)boot.
919 * Thus the command response counter remains disabled until it
920 * can be safely synchronized.
921 */
922 ar->cmd_seq = -2;
923
924 err = carl9170_usb_send_rx_irq_urb(ar);
925 if (err)
926 goto err_out;
927
928 err = carl9170_usb_init_rx_bulk_urbs(ar);
929 if (err)
930 goto err_unrx;
931
932 err = carl9170_usb_open(ar);
933 if (err)
934 goto err_unrx;
935
936 mutex_lock(&ar->mutex);
937 err = carl9170_usb_load_firmware(ar);
938 mutex_unlock(&ar->mutex);
939 if (err)
940 goto err_stop;
941
942 return 0;
943
944err_stop:
945 carl9170_usb_stop(ar);
946
947err_unrx:
948 carl9170_usb_cancel_urbs(ar);
949
950err_out:
951 return err;
952}
953
954static void carl9170_usb_firmware_failed(struct ar9170 *ar)
955{
956 struct device *parent = ar->udev->dev.parent;
957 struct usb_device *udev;
958
959 /*
960 * Store a copy of the usb_device pointer locally.
961 * This is because device_release_driver initiates
962 * carl9170_usb_disconnect, which in turn frees our
963 * driver context (ar).
964 */
965 udev = ar->udev;
966
967 complete(&ar->fw_load_wait);
968
969 /* unbind anything failed */
970 if (parent)
971 device_lock(parent);
972
973 device_release_driver(&udev->dev);
974 if (parent)
975 device_unlock(parent);
976
977 usb_put_dev(udev);
978}
979
980static void carl9170_usb_firmware_finish(struct ar9170 *ar)
981{
982 int err;
983
984 err = carl9170_parse_firmware(ar);
985 if (err)
986 goto err_freefw;
987
988 err = carl9170_usb_init_device(ar);
989 if (err)
990 goto err_freefw;
991
992 err = carl9170_register(ar);
993
994 carl9170_usb_stop(ar);
995 if (err)
996 goto err_unrx;
997
998 complete(&ar->fw_load_wait);
999 usb_put_dev(ar->udev);
1000 return;
1001
1002err_unrx:
1003 carl9170_usb_cancel_urbs(ar);
1004
1005err_freefw:
1006 carl9170_release_firmware(ar);
1007 carl9170_usb_firmware_failed(ar);
1008}
1009
1010static void carl9170_usb_firmware_step2(const struct firmware *fw,
1011 void *context)
1012{
1013 struct ar9170 *ar = context;
1014
1015 if (fw) {
1016 ar->fw.fw = fw;
1017 carl9170_usb_firmware_finish(ar);
1018 return;
1019 }
1020
1021 dev_err(&ar->udev->dev, "firmware not found.\n");
1022 carl9170_usb_firmware_failed(ar);
1023}
1024
1025static int carl9170_usb_probe(struct usb_interface *intf,
1026 const struct usb_device_id *id)
1027{
1028 struct ar9170 *ar;
1029 struct usb_device *udev;
1030 int err;
1031
1032 err = usb_reset_device(interface_to_usbdev(intf));
1033 if (err)
1034 return err;
1035
1036 ar = carl9170_alloc(sizeof(*ar));
1037 if (IS_ERR(ar))
1038 return PTR_ERR(ar);
1039
1040 udev = interface_to_usbdev(intf);
1041 usb_get_dev(udev);
1042 ar->udev = udev;
1043 ar->intf = intf;
1044 ar->features = id->driver_info;
1045
1046 usb_set_intfdata(intf, ar);
1047 SET_IEEE80211_DEV(ar->hw, &intf->dev);
1048
1049 init_usb_anchor(&ar->rx_anch);
1050 init_usb_anchor(&ar->rx_pool);
1051 init_usb_anchor(&ar->rx_work);
1052 init_usb_anchor(&ar->tx_wait);
1053 init_usb_anchor(&ar->tx_anch);
1054 init_usb_anchor(&ar->tx_cmd);
1055 init_usb_anchor(&ar->tx_err);
1056 init_completion(&ar->cmd_wait);
1057 init_completion(&ar->fw_boot_wait);
1058 init_completion(&ar->fw_load_wait);
1059 tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet,
1060 (unsigned long)ar);
1061
1062 atomic_set(&ar->tx_cmd_urbs, 0);
1063 atomic_set(&ar->tx_anch_urbs, 0);
1064 atomic_set(&ar->rx_work_urbs, 0);
1065 atomic_set(&ar->rx_anch_urbs, 0);
1066 atomic_set(&ar->rx_pool_urbs, 0);
1067
1068 usb_get_dev(ar->udev);
1069
1070 carl9170_set_state(ar, CARL9170_STOPPED);
1071
1072 return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
1073 &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
1074}
1075
1076static void carl9170_usb_disconnect(struct usb_interface *intf)
1077{
1078 struct ar9170 *ar = usb_get_intfdata(intf);
1079 struct usb_device *udev;
1080
1081 if (WARN_ON(!ar))
1082 return;
1083
1084 udev = ar->udev;
1085 wait_for_completion(&ar->fw_load_wait);
1086
1087 if (IS_INITIALIZED(ar)) {
1088 carl9170_reboot(ar);
1089 carl9170_usb_stop(ar);
1090 }
1091
1092 carl9170_usb_cancel_urbs(ar);
1093 carl9170_unregister(ar);
1094
1095 usb_set_intfdata(intf, NULL);
1096
1097 carl9170_release_firmware(ar);
1098 carl9170_free(ar);
1099 usb_put_dev(udev);
1100}
1101
1102#ifdef CONFIG_PM
1103static int carl9170_usb_suspend(struct usb_interface *intf,
1104 pm_message_t message)
1105{
1106 struct ar9170 *ar = usb_get_intfdata(intf);
1107
1108 if (!ar)
1109 return -ENODEV;
1110
1111 carl9170_usb_cancel_urbs(ar);
1112
1113 return 0;
1114}
1115
1116static int carl9170_usb_resume(struct usb_interface *intf)
1117{
1118 struct ar9170 *ar = usb_get_intfdata(intf);
1119 int err;
1120
1121 if (!ar)
1122 return -ENODEV;
1123
1124 usb_unpoison_anchored_urbs(&ar->rx_anch);
1125 carl9170_set_state(ar, CARL9170_STOPPED);
1126
1127 /*
1128 * The USB documentation demands that [for suspend] all traffic
1129 * to and from the device has to stop. This would be fine, but
1130 * there's a catch: the device[usb phy] does not come back.
1131 *
1132 * Upon resume the firmware will "kill" itself and the
1133 * boot-code sorts out the magic voodoo.
1134 * Not very nice, but there's not much what could go wrong.
1135 */
1136 msleep(1100);
1137
1138 err = carl9170_usb_init_device(ar);
1139 if (err)
1140 goto err_unrx;
1141
1142 return 0;
1143
1144err_unrx:
1145 carl9170_usb_cancel_urbs(ar);
1146
1147 return err;
1148}
1149#endif /* CONFIG_PM */
1150
1151static struct usb_driver carl9170_driver = {
1152 .name = KBUILD_MODNAME,
1153 .probe = carl9170_usb_probe,
1154 .disconnect = carl9170_usb_disconnect,
1155 .id_table = carl9170_usb_ids,
1156 .soft_unbind = 1,
1157#ifdef CONFIG_PM
1158 .suspend = carl9170_usb_suspend,
1159 .resume = carl9170_usb_resume,
1160 .reset_resume = carl9170_usb_resume,
1161#endif /* CONFIG_PM */
1162};
1163
1164static int __init carl9170_usb_init(void)
1165{
1166 return usb_register(&carl9170_driver);
1167}
1168
1169static void __exit carl9170_usb_exit(void)
1170{
1171 usb_deregister(&carl9170_driver);
1172}
1173
1174module_init(carl9170_usb_init);
1175module_exit(carl9170_usb_exit);
1/*
2 * Atheros CARL9170 driver
3 *
4 * USB - frontend
5 *
6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; see the file COPYING. If not, see
21 * http://www.gnu.org/licenses/.
22 *
23 * This file incorporates work covered by the following copyright and
24 * permission notice:
25 * Copyright (c) 2007-2008 Atheros Communications, Inc.
26 *
27 * Permission to use, copy, modify, and/or distribute this software for any
28 * purpose with or without fee is hereby granted, provided that the above
29 * copyright notice and this permission notice appear in all copies.
30 *
31 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
32 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
33 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
34 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
35 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
36 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
37 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
38 */
39
40#include <linux/module.h>
41#include <linux/slab.h>
42#include <linux/usb.h>
43#include <linux/firmware.h>
44#include <linux/etherdevice.h>
45#include <linux/device.h>
46#include <net/mac80211.h>
47#include "carl9170.h"
48#include "cmd.h"
49#include "hw.h"
50#include "fwcmd.h"
51
52MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
53MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
54MODULE_LICENSE("GPL");
55MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
56MODULE_FIRMWARE(CARL9170FW_NAME);
57MODULE_ALIAS("ar9170usb");
58MODULE_ALIAS("arusb_lnx");
59
60/*
61 * Note:
62 *
63 * Always update our wiki's device list (located at:
64 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
65 * whenever you add a new device.
66 */
67static struct usb_device_id carl9170_usb_ids[] = {
68 /* Atheros 9170 */
69 { USB_DEVICE(0x0cf3, 0x9170) },
70 /* Atheros TG121N */
71 { USB_DEVICE(0x0cf3, 0x1001) },
72 /* TP-Link TL-WN821N v2 */
73 { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
74 CARL9170_ONE_LED },
75 /* 3Com Dual Band 802.11n USB Adapter */
76 { USB_DEVICE(0x0cf3, 0x1010) },
77 /* H3C Dual Band 802.11n USB Adapter */
78 { USB_DEVICE(0x0cf3, 0x1011) },
79 /* Cace Airpcap NX */
80 { USB_DEVICE(0xcace, 0x0300) },
81 /* D-Link DWA 160 A1 */
82 { USB_DEVICE(0x07d1, 0x3c10) },
83 /* D-Link DWA 160 A2 */
84 { USB_DEVICE(0x07d1, 0x3a09) },
85 /* D-Link DWA 130 D */
86 { USB_DEVICE(0x07d1, 0x3a0f) },
87 /* Netgear WNA1000 */
88 { USB_DEVICE(0x0846, 0x9040) },
89 /* Netgear WNDA3100 (v1) */
90 { USB_DEVICE(0x0846, 0x9010) },
91 /* Netgear WN111 v2 */
92 { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
93 /* Zydas ZD1221 */
94 { USB_DEVICE(0x0ace, 0x1221) },
95 /* Proxim ORiNOCO 802.11n USB */
96 { USB_DEVICE(0x1435, 0x0804) },
97 /* WNC Generic 11n USB Dongle */
98 { USB_DEVICE(0x1435, 0x0326) },
99 /* ZyXEL NWD271N */
100 { USB_DEVICE(0x0586, 0x3417) },
101 /* Z-Com UB81 BG */
102 { USB_DEVICE(0x0cde, 0x0023) },
103 /* Z-Com UB82 ABG */
104 { USB_DEVICE(0x0cde, 0x0026) },
105 /* Sphairon Homelink 1202 */
106 { USB_DEVICE(0x0cde, 0x0027) },
107 /* Arcadyan WN7512 */
108 { USB_DEVICE(0x083a, 0xf522) },
109 /* Planex GWUS300 */
110 { USB_DEVICE(0x2019, 0x5304) },
111 /* IO-Data WNGDNUS2 */
112 { USB_DEVICE(0x04bb, 0x093f) },
113 /* NEC WL300NU-G */
114 { USB_DEVICE(0x0409, 0x0249) },
115 /* NEC WL300NU-AG */
116 { USB_DEVICE(0x0409, 0x02b4) },
117 /* AVM FRITZ!WLAN USB Stick N */
118 { USB_DEVICE(0x057c, 0x8401) },
119 /* AVM FRITZ!WLAN USB Stick N 2.4 */
120 { USB_DEVICE(0x057c, 0x8402) },
121 /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
122 { USB_DEVICE(0x1668, 0x1200) },
123 /* Airlive X.USB a/b/g/n */
124 { USB_DEVICE(0x1b75, 0x9170) },
125
126 /* terminate */
127 {}
128};
129MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);
130
131static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
132{
133 struct urb *urb;
134 int err;
135
136 if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS)
137 goto err_acc;
138
139 urb = usb_get_from_anchor(&ar->tx_wait);
140 if (!urb)
141 goto err_acc;
142
143 usb_anchor_urb(urb, &ar->tx_anch);
144
145 err = usb_submit_urb(urb, GFP_ATOMIC);
146 if (unlikely(err)) {
147 if (net_ratelimit()) {
148 dev_err(&ar->udev->dev, "tx submit failed (%d)\n",
149 urb->status);
150 }
151
152 usb_unanchor_urb(urb);
153 usb_anchor_urb(urb, &ar->tx_err);
154 }
155
156 usb_free_urb(urb);
157
158 if (likely(err == 0))
159 return;
160
161err_acc:
162 atomic_dec(&ar->tx_anch_urbs);
163}
164
165static void carl9170_usb_tx_data_complete(struct urb *urb)
166{
167 struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
168
169 if (WARN_ON_ONCE(!ar)) {
170 dev_kfree_skb_irq(urb->context);
171 return;
172 }
173
174 atomic_dec(&ar->tx_anch_urbs);
175
176 switch (urb->status) {
177 /* everything is fine */
178 case 0:
179 carl9170_tx_callback(ar, (void *)urb->context);
180 break;
181
182 /* disconnect */
183 case -ENOENT:
184 case -ECONNRESET:
185 case -ENODEV:
186 case -ESHUTDOWN:
187 /*
188 * Defer the frame clean-up to the tasklet worker.
189 * This is necessary, because carl9170_tx_drop
190 * does not work in an irqsave context.
191 */
192 usb_anchor_urb(urb, &ar->tx_err);
193 return;
194
195 /* a random transmission error has occurred? */
196 default:
197 if (net_ratelimit()) {
198 dev_err(&ar->udev->dev, "tx failed (%d)\n",
199 urb->status);
200 }
201
202 usb_anchor_urb(urb, &ar->tx_err);
203 break;
204 }
205
206 if (likely(IS_STARTED(ar)))
207 carl9170_usb_submit_data_urb(ar);
208}
209
210static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar)
211{
212 struct urb *urb;
213 int err;
214
215 if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) {
216 atomic_dec(&ar->tx_cmd_urbs);
217 return 0;
218 }
219
220 urb = usb_get_from_anchor(&ar->tx_cmd);
221 if (!urb) {
222 atomic_dec(&ar->tx_cmd_urbs);
223 return 0;
224 }
225
226 usb_anchor_urb(urb, &ar->tx_anch);
227 err = usb_submit_urb(urb, GFP_ATOMIC);
228 if (unlikely(err)) {
229 usb_unanchor_urb(urb);
230 atomic_dec(&ar->tx_cmd_urbs);
231 }
232 usb_free_urb(urb);
233
234 return err;
235}
236
237static void carl9170_usb_cmd_complete(struct urb *urb)
238{
239 struct ar9170 *ar = urb->context;
240 int err = 0;
241
242 if (WARN_ON_ONCE(!ar))
243 return;
244
245 atomic_dec(&ar->tx_cmd_urbs);
246
247 switch (urb->status) {
248 /* everything is fine */
249 case 0:
250 break;
251
252 /* disconnect */
253 case -ENOENT:
254 case -ECONNRESET:
255 case -ENODEV:
256 case -ESHUTDOWN:
257 return;
258
259 default:
260 err = urb->status;
261 break;
262 }
263
264 if (!IS_INITIALIZED(ar))
265 return;
266
267 if (err)
268 dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err);
269
270 err = carl9170_usb_submit_cmd_urb(ar);
271 if (err)
272 dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err);
273}
274
275static void carl9170_usb_rx_irq_complete(struct urb *urb)
276{
277 struct ar9170 *ar = urb->context;
278
279 if (WARN_ON_ONCE(!ar))
280 return;
281
282 switch (urb->status) {
283 /* everything is fine */
284 case 0:
285 break;
286
287 /* disconnect */
288 case -ENOENT:
289 case -ECONNRESET:
290 case -ENODEV:
291 case -ESHUTDOWN:
292 return;
293
294 default:
295 goto resubmit;
296 }
297
298 /*
299 * While the carl9170 firmware does not use this EP, the
300 * firmware loader in the EEPROM unfortunately does.
301 * Therefore we need to be ready to handle out-of-band
302 * responses and traps in case the firmware crashed and
303 * the loader took over again.
304 */
305 carl9170_handle_command_response(ar, urb->transfer_buffer,
306 urb->actual_length);
307
308resubmit:
309 usb_anchor_urb(urb, &ar->rx_anch);
310 if (unlikely(usb_submit_urb(urb, GFP_ATOMIC)))
311 usb_unanchor_urb(urb);
312}
313
314static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp)
315{
316 struct urb *urb;
317 int err = 0, runs = 0;
318
319 while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) &&
320 (runs++ < AR9170_NUM_RX_URBS)) {
321 err = -ENOSPC;
322 urb = usb_get_from_anchor(&ar->rx_pool);
323 if (urb) {
324 usb_anchor_urb(urb, &ar->rx_anch);
325 err = usb_submit_urb(urb, gfp);
326 if (unlikely(err)) {
327 usb_unanchor_urb(urb);
328 usb_anchor_urb(urb, &ar->rx_pool);
329 } else {
330 atomic_dec(&ar->rx_pool_urbs);
331 atomic_inc(&ar->rx_anch_urbs);
332 }
333 usb_free_urb(urb);
334 }
335 }
336
337 return err;
338}
339
340static void carl9170_usb_rx_work(struct ar9170 *ar)
341{
342 struct urb *urb;
343 int i;
344
345 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
346 urb = usb_get_from_anchor(&ar->rx_work);
347 if (!urb)
348 break;
349
350 atomic_dec(&ar->rx_work_urbs);
351 if (IS_INITIALIZED(ar)) {
352 carl9170_rx(ar, urb->transfer_buffer,
353 urb->actual_length);
354 }
355
356 usb_anchor_urb(urb, &ar->rx_pool);
357 atomic_inc(&ar->rx_pool_urbs);
358
359 usb_free_urb(urb);
360
361 carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
362 }
363}
364
365void carl9170_usb_handle_tx_err(struct ar9170 *ar)
366{
367 struct urb *urb;
368
369 while ((urb = usb_get_from_anchor(&ar->tx_err))) {
370 struct sk_buff *skb = (void *)urb->context;
371
372 carl9170_tx_drop(ar, skb);
373 carl9170_tx_callback(ar, skb);
374 usb_free_urb(urb);
375 }
376}
377
378static void carl9170_usb_tasklet(unsigned long data)
379{
380 struct ar9170 *ar = (struct ar9170 *) data;
381
382 if (!IS_INITIALIZED(ar))
383 return;
384
385 carl9170_usb_rx_work(ar);
386
387 /*
388 * Strictly speaking: The tx scheduler is not part of the USB system.
389 * But the rx worker returns frames back to the mac80211-stack and
390 * this is the _perfect_ place to generate the next transmissions.
391 */
392 if (IS_STARTED(ar))
393 carl9170_tx_scheduler(ar);
394}
395
396static void carl9170_usb_rx_complete(struct urb *urb)
397{
398 struct ar9170 *ar = (struct ar9170 *)urb->context;
399 int err;
400
401 if (WARN_ON_ONCE(!ar))
402 return;
403
404 atomic_dec(&ar->rx_anch_urbs);
405
406 switch (urb->status) {
407 case 0:
408 /* rx path */
409 usb_anchor_urb(urb, &ar->rx_work);
410 atomic_inc(&ar->rx_work_urbs);
411 break;
412
413 case -ENOENT:
414 case -ECONNRESET:
415 case -ENODEV:
416 case -ESHUTDOWN:
417 /* handle disconnect events*/
418 return;
419
420 default:
421 /* handle all other errors */
422 usb_anchor_urb(urb, &ar->rx_pool);
423 atomic_inc(&ar->rx_pool_urbs);
424 break;
425 }
426
427 err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
428 if (unlikely(err)) {
429 /*
430 * usb_submit_rx_urb reported a problem.
431 * In case this is due to a rx buffer shortage,
432 * elevate the tasklet worker priority to
433 * the highest available level.
434 */
435 tasklet_hi_schedule(&ar->usb_tasklet);
436
437 if (atomic_read(&ar->rx_anch_urbs) == 0) {
438 /*
439 * The system is too slow to cope with
440 * the enormous workload. We have simply
441 * run out of active rx urbs and this
442 * unfortunately leads to an unpredictable
443 * device.
444 */
445
446 ieee80211_queue_work(ar->hw, &ar->ping_work);
447 }
448 } else {
449 /*
450 * Using anything less than _high_ priority absolutely
451 * kills the rx performance my UP-System...
452 */
453 tasklet_hi_schedule(&ar->usb_tasklet);
454 }
455}
456
457static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp)
458{
459 struct urb *urb;
460 void *buf;
461
462 buf = kmalloc(ar->fw.rx_size, gfp);
463 if (!buf)
464 return NULL;
465
466 urb = usb_alloc_urb(0, gfp);
467 if (!urb) {
468 kfree(buf);
469 return NULL;
470 }
471
472 usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev,
473 AR9170_USB_EP_RX), buf, ar->fw.rx_size,
474 carl9170_usb_rx_complete, ar);
475
476 urb->transfer_flags |= URB_FREE_BUFFER;
477
478 return urb;
479}
480
481static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar)
482{
483 struct urb *urb = NULL;
484 void *ibuf;
485 int err = -ENOMEM;
486
487 urb = usb_alloc_urb(0, GFP_KERNEL);
488 if (!urb)
489 goto out;
490
491 ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL);
492 if (!ibuf)
493 goto out;
494
495 usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev,
496 AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX,
497 carl9170_usb_rx_irq_complete, ar, 1);
498
499 urb->transfer_flags |= URB_FREE_BUFFER;
500
501 usb_anchor_urb(urb, &ar->rx_anch);
502 err = usb_submit_urb(urb, GFP_KERNEL);
503 if (err)
504 usb_unanchor_urb(urb);
505
506out:
507 usb_free_urb(urb);
508 return err;
509}
510
511static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar)
512{
513 struct urb *urb;
514 int i, err = -EINVAL;
515
516 /*
517 * The driver actively maintains a second shadow
518 * pool for inactive, but fully-prepared rx urbs.
519 *
520 * The pool should help the driver to master huge
521 * workload spikes without running the risk of
522 * undersupplying the hardware or wasting time by
523 * processing rx data (streams) inside the urb
524 * completion (hardirq context).
525 */
526 for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
527 urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL);
528 if (!urb) {
529 err = -ENOMEM;
530 goto err_out;
531 }
532
533 usb_anchor_urb(urb, &ar->rx_pool);
534 atomic_inc(&ar->rx_pool_urbs);
535 usb_free_urb(urb);
536 }
537
538 err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL);
539 if (err)
540 goto err_out;
541
542 /* the device now waiting for the firmware. */
543 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
544 return 0;
545
546err_out:
547
548 usb_scuttle_anchored_urbs(&ar->rx_pool);
549 usb_scuttle_anchored_urbs(&ar->rx_work);
550 usb_kill_anchored_urbs(&ar->rx_anch);
551 return err;
552}
553
554static int carl9170_usb_flush(struct ar9170 *ar)
555{
556 struct urb *urb;
557 int ret, err = 0;
558
559 while ((urb = usb_get_from_anchor(&ar->tx_wait))) {
560 struct sk_buff *skb = (void *)urb->context;
561 carl9170_tx_drop(ar, skb);
562 carl9170_tx_callback(ar, skb);
563 usb_free_urb(urb);
564 }
565
566 ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
567 if (ret == 0)
568 err = -ETIMEDOUT;
569
570 /* lets wait a while until the tx - queues are dried out */
571 ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
572 if (ret == 0)
573 err = -ETIMEDOUT;
574
575 usb_kill_anchored_urbs(&ar->tx_anch);
576 carl9170_usb_handle_tx_err(ar);
577
578 return err;
579}
580
581static void carl9170_usb_cancel_urbs(struct ar9170 *ar)
582{
583 int err;
584
585 carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);
586
587 err = carl9170_usb_flush(ar);
588 if (err)
589 dev_err(&ar->udev->dev, "stuck tx urbs!\n");
590
591 usb_poison_anchored_urbs(&ar->tx_anch);
592 carl9170_usb_handle_tx_err(ar);
593 usb_poison_anchored_urbs(&ar->rx_anch);
594
595 tasklet_kill(&ar->usb_tasklet);
596
597 usb_scuttle_anchored_urbs(&ar->rx_work);
598 usb_scuttle_anchored_urbs(&ar->rx_pool);
599 usb_scuttle_anchored_urbs(&ar->tx_cmd);
600}
601
602int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
603 const bool free_buf)
604{
605 struct urb *urb;
606 int err = 0;
607
608 if (!IS_INITIALIZED(ar)) {
609 err = -EPERM;
610 goto err_free;
611 }
612
613 if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) {
614 err = -EINVAL;
615 goto err_free;
616 }
617
618 urb = usb_alloc_urb(0, GFP_ATOMIC);
619 if (!urb) {
620 err = -ENOMEM;
621 goto err_free;
622 }
623
624 usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
625 AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
626 carl9170_usb_cmd_complete, ar, 1);
627
628 if (free_buf)
629 urb->transfer_flags |= URB_FREE_BUFFER;
630
631 usb_anchor_urb(urb, &ar->tx_cmd);
632 usb_free_urb(urb);
633
634 return carl9170_usb_submit_cmd_urb(ar);
635
636err_free:
637 if (free_buf)
638 kfree(cmd);
639
640 return err;
641}
642
643int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd,
644 unsigned int plen, void *payload, unsigned int outlen, void *out)
645{
646 int err = -ENOMEM;
647
648 if (!IS_ACCEPTING_CMD(ar))
649 return -EIO;
650
651 if (!(cmd & CARL9170_CMD_ASYNC_FLAG))
652 might_sleep();
653
654 ar->cmd.hdr.len = plen;
655 ar->cmd.hdr.cmd = cmd;
656 /* writing multiple regs fills this buffer already */
657 if (plen && payload != (u8 *)(ar->cmd.data))
658 memcpy(ar->cmd.data, payload, plen);
659
660 spin_lock_bh(&ar->cmd_lock);
661 ar->readbuf = (u8 *)out;
662 ar->readlen = outlen;
663 spin_unlock_bh(&ar->cmd_lock);
664
665 err = __carl9170_exec_cmd(ar, &ar->cmd, false);
666
667 if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) {
668 err = wait_for_completion_timeout(&ar->cmd_wait, HZ);
669 if (err == 0) {
670 err = -ETIMEDOUT;
671 goto err_unbuf;
672 }
673
674 if (ar->readlen != outlen) {
675 err = -EMSGSIZE;
676 goto err_unbuf;
677 }
678 }
679
680 return 0;
681
682err_unbuf:
683 /* Maybe the device was removed in the moment we were waiting? */
684 if (IS_STARTED(ar)) {
685 dev_err(&ar->udev->dev, "no command feedback "
686 "received (%d).\n", err);
687
688 /* provide some maybe useful debug information */
689 print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE,
690 &ar->cmd, plen + 4);
691
692 carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT);
693 }
694
695 /* invalidate to avoid completing the next command prematurely */
696 spin_lock_bh(&ar->cmd_lock);
697 ar->readbuf = NULL;
698 ar->readlen = 0;
699 spin_unlock_bh(&ar->cmd_lock);
700
701 return err;
702}
703
704void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
705{
706 struct urb *urb;
707 struct ar9170_stream *tx_stream;
708 void *data;
709 unsigned int len;
710
711 if (!IS_STARTED(ar))
712 goto err_drop;
713
714 urb = usb_alloc_urb(0, GFP_ATOMIC);
715 if (!urb)
716 goto err_drop;
717
718 if (ar->fw.tx_stream) {
719 tx_stream = (void *) (skb->data - sizeof(*tx_stream));
720
721 len = skb->len + sizeof(*tx_stream);
722 tx_stream->length = cpu_to_le16(len);
723 tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG);
724 data = tx_stream;
725 } else {
726 data = skb->data;
727 len = skb->len;
728 }
729
730 usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev,
731 AR9170_USB_EP_TX), data, len,
732 carl9170_usb_tx_data_complete, skb);
733
734 urb->transfer_flags |= URB_ZERO_PACKET;
735
736 usb_anchor_urb(urb, &ar->tx_wait);
737
738 usb_free_urb(urb);
739
740 carl9170_usb_submit_data_urb(ar);
741 return;
742
743err_drop:
744 carl9170_tx_drop(ar, skb);
745 carl9170_tx_callback(ar, skb);
746}
747
748static void carl9170_release_firmware(struct ar9170 *ar)
749{
750 if (ar->fw.fw) {
751 release_firmware(ar->fw.fw);
752 memset(&ar->fw, 0, sizeof(ar->fw));
753 }
754}
755
756void carl9170_usb_stop(struct ar9170 *ar)
757{
758 int ret;
759
760 carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED);
761
762 ret = carl9170_usb_flush(ar);
763 if (ret)
764 dev_err(&ar->udev->dev, "kill pending tx urbs.\n");
765
766 usb_poison_anchored_urbs(&ar->tx_anch);
767 carl9170_usb_handle_tx_err(ar);
768
769 /* kill any pending command */
770 spin_lock_bh(&ar->cmd_lock);
771 ar->readlen = 0;
772 spin_unlock_bh(&ar->cmd_lock);
773 complete_all(&ar->cmd_wait);
774
775 /* This is required to prevent an early completion on _start */
776 reinit_completion(&ar->cmd_wait);
777
778 /*
779 * Note:
780 * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
781 * Else we would end up with a unresponsive device...
782 */
783}
784
785int carl9170_usb_open(struct ar9170 *ar)
786{
787 usb_unpoison_anchored_urbs(&ar->tx_anch);
788
789 carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
790 return 0;
791}
792
793static int carl9170_usb_load_firmware(struct ar9170 *ar)
794{
795 const u8 *data;
796 u8 *buf;
797 unsigned int transfer;
798 size_t len;
799 u32 addr;
800 int err = 0;
801
802 buf = kmalloc(4096, GFP_KERNEL);
803 if (!buf) {
804 err = -ENOMEM;
805 goto err_out;
806 }
807
808 data = ar->fw.fw->data;
809 len = ar->fw.fw->size;
810 addr = ar->fw.address;
811
812 /* this removes the miniboot image */
813 data += ar->fw.offset;
814 len -= ar->fw.offset;
815
816 while (len) {
817 transfer = min_t(unsigned int, len, 4096u);
818 memcpy(buf, data, transfer);
819
820 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
821 0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
822 addr >> 8, 0, buf, transfer, 100);
823
824 if (err < 0) {
825 kfree(buf);
826 goto err_out;
827 }
828
829 len -= transfer;
830 data += transfer;
831 addr += transfer;
832 }
833 kfree(buf);
834
835 err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
836 0x31 /* FW DL COMPLETE */,
837 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200);
838
839 if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) {
840 err = -ETIMEDOUT;
841 goto err_out;
842 }
843
844 err = carl9170_echo_test(ar, 0x4a110123);
845 if (err)
846 goto err_out;
847
848 /* now, start the command response counter */
849 ar->cmd_seq = -1;
850
851 return 0;
852
853err_out:
854 dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err);
855 return err;
856}
857
858int carl9170_usb_restart(struct ar9170 *ar)
859{
860 int err = 0;
861
862 if (ar->intf->condition != USB_INTERFACE_BOUND)
863 return 0;
864
865 /*
866 * Disable the command response sequence counter check.
867 * We already know that the device/firmware is in a bad state.
868 * So, no extra points are awarded to anyone who reminds the
869 * driver about that.
870 */
871 ar->cmd_seq = -2;
872
873 err = carl9170_reboot(ar);
874
875 carl9170_usb_stop(ar);
876
877 if (err)
878 goto err_out;
879
880 tasklet_schedule(&ar->usb_tasklet);
881
882 /* The reboot procedure can take quite a while to complete. */
883 msleep(1100);
884
885 err = carl9170_usb_open(ar);
886 if (err)
887 goto err_out;
888
889 err = carl9170_usb_load_firmware(ar);
890 if (err)
891 goto err_out;
892
893 return 0;
894
895err_out:
896 carl9170_usb_cancel_urbs(ar);
897 return err;
898}
899
900void carl9170_usb_reset(struct ar9170 *ar)
901{
902 /*
903 * This is the last resort to get the device going again
904 * without any *user replugging action*.
905 *
906 * But there is a catch: usb_reset really is like a physical
907 * *reconnect*. The mac80211 state will be lost in the process.
908 * Therefore a userspace application, which is monitoring
909 * the link must step in.
910 */
911 carl9170_usb_cancel_urbs(ar);
912
913 carl9170_usb_stop(ar);
914
915 usb_queue_reset_device(ar->intf);
916}
917
918static int carl9170_usb_init_device(struct ar9170 *ar)
919{
920 int err;
921
922 /*
923 * The carl9170 firmware let's the driver know when it's
924 * ready for action. But we have to be prepared to gracefully
925 * handle all spurious [flushed] messages after each (re-)boot.
926 * Thus the command response counter remains disabled until it
927 * can be safely synchronized.
928 */
929 ar->cmd_seq = -2;
930
931 err = carl9170_usb_send_rx_irq_urb(ar);
932 if (err)
933 goto err_out;
934
935 err = carl9170_usb_init_rx_bulk_urbs(ar);
936 if (err)
937 goto err_unrx;
938
939 err = carl9170_usb_open(ar);
940 if (err)
941 goto err_unrx;
942
943 mutex_lock(&ar->mutex);
944 err = carl9170_usb_load_firmware(ar);
945 mutex_unlock(&ar->mutex);
946 if (err)
947 goto err_stop;
948
949 return 0;
950
951err_stop:
952 carl9170_usb_stop(ar);
953
954err_unrx:
955 carl9170_usb_cancel_urbs(ar);
956
957err_out:
958 return err;
959}
960
961static void carl9170_usb_firmware_failed(struct ar9170 *ar)
962{
963 struct device *parent = ar->udev->dev.parent;
964 struct usb_device *udev;
965
966 /*
967 * Store a copy of the usb_device pointer locally.
968 * This is because device_release_driver initiates
969 * carl9170_usb_disconnect, which in turn frees our
970 * driver context (ar).
971 */
972 udev = ar->udev;
973
974 complete(&ar->fw_load_wait);
975
976 /* unbind anything failed */
977 if (parent)
978 device_lock(parent);
979
980 device_release_driver(&udev->dev);
981 if (parent)
982 device_unlock(parent);
983
984 usb_put_dev(udev);
985}
986
987static void carl9170_usb_firmware_finish(struct ar9170 *ar)
988{
989 int err;
990
991 err = carl9170_parse_firmware(ar);
992 if (err)
993 goto err_freefw;
994
995 err = carl9170_usb_init_device(ar);
996 if (err)
997 goto err_freefw;
998
999 err = carl9170_register(ar);
1000
1001 carl9170_usb_stop(ar);
1002 if (err)
1003 goto err_unrx;
1004
1005 complete(&ar->fw_load_wait);
1006 usb_put_dev(ar->udev);
1007 return;
1008
1009err_unrx:
1010 carl9170_usb_cancel_urbs(ar);
1011
1012err_freefw:
1013 carl9170_release_firmware(ar);
1014 carl9170_usb_firmware_failed(ar);
1015}
1016
1017static void carl9170_usb_firmware_step2(const struct firmware *fw,
1018 void *context)
1019{
1020 struct ar9170 *ar = context;
1021
1022 if (fw) {
1023 ar->fw.fw = fw;
1024 carl9170_usb_firmware_finish(ar);
1025 return;
1026 }
1027
1028 dev_err(&ar->udev->dev, "firmware not found.\n");
1029 carl9170_usb_firmware_failed(ar);
1030}
1031
1032static int carl9170_usb_probe(struct usb_interface *intf,
1033 const struct usb_device_id *id)
1034{
1035 struct ar9170 *ar;
1036 struct usb_device *udev;
1037 int err;
1038
1039 err = usb_reset_device(interface_to_usbdev(intf));
1040 if (err)
1041 return err;
1042
1043 ar = carl9170_alloc(sizeof(*ar));
1044 if (IS_ERR(ar))
1045 return PTR_ERR(ar);
1046
1047 udev = interface_to_usbdev(intf);
1048 usb_get_dev(udev);
1049 ar->udev = udev;
1050 ar->intf = intf;
1051 ar->features = id->driver_info;
1052
1053 usb_set_intfdata(intf, ar);
1054 SET_IEEE80211_DEV(ar->hw, &intf->dev);
1055
1056 init_usb_anchor(&ar->rx_anch);
1057 init_usb_anchor(&ar->rx_pool);
1058 init_usb_anchor(&ar->rx_work);
1059 init_usb_anchor(&ar->tx_wait);
1060 init_usb_anchor(&ar->tx_anch);
1061 init_usb_anchor(&ar->tx_cmd);
1062 init_usb_anchor(&ar->tx_err);
1063 init_completion(&ar->cmd_wait);
1064 init_completion(&ar->fw_boot_wait);
1065 init_completion(&ar->fw_load_wait);
1066 tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet,
1067 (unsigned long)ar);
1068
1069 atomic_set(&ar->tx_cmd_urbs, 0);
1070 atomic_set(&ar->tx_anch_urbs, 0);
1071 atomic_set(&ar->rx_work_urbs, 0);
1072 atomic_set(&ar->rx_anch_urbs, 0);
1073 atomic_set(&ar->rx_pool_urbs, 0);
1074
1075 usb_get_dev(ar->udev);
1076
1077 carl9170_set_state(ar, CARL9170_STOPPED);
1078
1079 return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
1080 &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
1081}
1082
1083static void carl9170_usb_disconnect(struct usb_interface *intf)
1084{
1085 struct ar9170 *ar = usb_get_intfdata(intf);
1086 struct usb_device *udev;
1087
1088 if (WARN_ON(!ar))
1089 return;
1090
1091 udev = ar->udev;
1092 wait_for_completion(&ar->fw_load_wait);
1093
1094 if (IS_INITIALIZED(ar)) {
1095 carl9170_reboot(ar);
1096 carl9170_usb_stop(ar);
1097 }
1098
1099 carl9170_usb_cancel_urbs(ar);
1100 carl9170_unregister(ar);
1101
1102 usb_set_intfdata(intf, NULL);
1103
1104 carl9170_release_firmware(ar);
1105 carl9170_free(ar);
1106 usb_put_dev(udev);
1107}
1108
1109#ifdef CONFIG_PM
1110static int carl9170_usb_suspend(struct usb_interface *intf,
1111 pm_message_t message)
1112{
1113 struct ar9170 *ar = usb_get_intfdata(intf);
1114
1115 if (!ar)
1116 return -ENODEV;
1117
1118 carl9170_usb_cancel_urbs(ar);
1119
1120 return 0;
1121}
1122
1123static int carl9170_usb_resume(struct usb_interface *intf)
1124{
1125 struct ar9170 *ar = usb_get_intfdata(intf);
1126 int err;
1127
1128 if (!ar)
1129 return -ENODEV;
1130
1131 usb_unpoison_anchored_urbs(&ar->rx_anch);
1132 carl9170_set_state(ar, CARL9170_STOPPED);
1133
1134 /*
1135 * The USB documentation demands that [for suspend] all traffic
1136 * to and from the device has to stop. This would be fine, but
1137 * there's a catch: the device[usb phy] does not come back.
1138 *
1139 * Upon resume the firmware will "kill" itself and the
1140 * boot-code sorts out the magic voodoo.
1141 * Not very nice, but there's not much what could go wrong.
1142 */
1143 msleep(1100);
1144
1145 err = carl9170_usb_init_device(ar);
1146 if (err)
1147 goto err_unrx;
1148
1149 return 0;
1150
1151err_unrx:
1152 carl9170_usb_cancel_urbs(ar);
1153
1154 return err;
1155}
1156#endif /* CONFIG_PM */
1157
1158static struct usb_driver carl9170_driver = {
1159 .name = KBUILD_MODNAME,
1160 .probe = carl9170_usb_probe,
1161 .disconnect = carl9170_usb_disconnect,
1162 .id_table = carl9170_usb_ids,
1163 .soft_unbind = 1,
1164#ifdef CONFIG_PM
1165 .suspend = carl9170_usb_suspend,
1166 .resume = carl9170_usb_resume,
1167 .reset_resume = carl9170_usb_resume,
1168#endif /* CONFIG_PM */
1169 .disable_hub_initiated_lpm = 1,
1170};
1171
1172module_usb_driver(carl9170_driver);