Loading...
1/*
2 * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
3 *
4 * Copyright 2009 Wolfson Microelectronics PLC.
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/i2c.h>
18#include <linux/irq.h>
19#include <linux/mfd/core.h>
20#include <linux/interrupt.h>
21
22#include <linux/mfd/wm831x/core.h>
23#include <linux/mfd/wm831x/pdata.h>
24#include <linux/mfd/wm831x/gpio.h>
25#include <linux/mfd/wm831x/irq.h>
26
27#include <linux/delay.h>
28
29struct wm831x_irq_data {
30 int primary;
31 int reg;
32 int mask;
33};
34
35static struct wm831x_irq_data wm831x_irqs[] = {
36 [WM831X_IRQ_TEMP_THW] = {
37 .primary = WM831X_TEMP_INT,
38 .reg = 1,
39 .mask = WM831X_TEMP_THW_EINT,
40 },
41 [WM831X_IRQ_GPIO_1] = {
42 .primary = WM831X_GP_INT,
43 .reg = 5,
44 .mask = WM831X_GP1_EINT,
45 },
46 [WM831X_IRQ_GPIO_2] = {
47 .primary = WM831X_GP_INT,
48 .reg = 5,
49 .mask = WM831X_GP2_EINT,
50 },
51 [WM831X_IRQ_GPIO_3] = {
52 .primary = WM831X_GP_INT,
53 .reg = 5,
54 .mask = WM831X_GP3_EINT,
55 },
56 [WM831X_IRQ_GPIO_4] = {
57 .primary = WM831X_GP_INT,
58 .reg = 5,
59 .mask = WM831X_GP4_EINT,
60 },
61 [WM831X_IRQ_GPIO_5] = {
62 .primary = WM831X_GP_INT,
63 .reg = 5,
64 .mask = WM831X_GP5_EINT,
65 },
66 [WM831X_IRQ_GPIO_6] = {
67 .primary = WM831X_GP_INT,
68 .reg = 5,
69 .mask = WM831X_GP6_EINT,
70 },
71 [WM831X_IRQ_GPIO_7] = {
72 .primary = WM831X_GP_INT,
73 .reg = 5,
74 .mask = WM831X_GP7_EINT,
75 },
76 [WM831X_IRQ_GPIO_8] = {
77 .primary = WM831X_GP_INT,
78 .reg = 5,
79 .mask = WM831X_GP8_EINT,
80 },
81 [WM831X_IRQ_GPIO_9] = {
82 .primary = WM831X_GP_INT,
83 .reg = 5,
84 .mask = WM831X_GP9_EINT,
85 },
86 [WM831X_IRQ_GPIO_10] = {
87 .primary = WM831X_GP_INT,
88 .reg = 5,
89 .mask = WM831X_GP10_EINT,
90 },
91 [WM831X_IRQ_GPIO_11] = {
92 .primary = WM831X_GP_INT,
93 .reg = 5,
94 .mask = WM831X_GP11_EINT,
95 },
96 [WM831X_IRQ_GPIO_12] = {
97 .primary = WM831X_GP_INT,
98 .reg = 5,
99 .mask = WM831X_GP12_EINT,
100 },
101 [WM831X_IRQ_GPIO_13] = {
102 .primary = WM831X_GP_INT,
103 .reg = 5,
104 .mask = WM831X_GP13_EINT,
105 },
106 [WM831X_IRQ_GPIO_14] = {
107 .primary = WM831X_GP_INT,
108 .reg = 5,
109 .mask = WM831X_GP14_EINT,
110 },
111 [WM831X_IRQ_GPIO_15] = {
112 .primary = WM831X_GP_INT,
113 .reg = 5,
114 .mask = WM831X_GP15_EINT,
115 },
116 [WM831X_IRQ_GPIO_16] = {
117 .primary = WM831X_GP_INT,
118 .reg = 5,
119 .mask = WM831X_GP16_EINT,
120 },
121 [WM831X_IRQ_ON] = {
122 .primary = WM831X_ON_PIN_INT,
123 .reg = 1,
124 .mask = WM831X_ON_PIN_EINT,
125 },
126 [WM831X_IRQ_PPM_SYSLO] = {
127 .primary = WM831X_PPM_INT,
128 .reg = 1,
129 .mask = WM831X_PPM_SYSLO_EINT,
130 },
131 [WM831X_IRQ_PPM_PWR_SRC] = {
132 .primary = WM831X_PPM_INT,
133 .reg = 1,
134 .mask = WM831X_PPM_PWR_SRC_EINT,
135 },
136 [WM831X_IRQ_PPM_USB_CURR] = {
137 .primary = WM831X_PPM_INT,
138 .reg = 1,
139 .mask = WM831X_PPM_USB_CURR_EINT,
140 },
141 [WM831X_IRQ_WDOG_TO] = {
142 .primary = WM831X_WDOG_INT,
143 .reg = 1,
144 .mask = WM831X_WDOG_TO_EINT,
145 },
146 [WM831X_IRQ_RTC_PER] = {
147 .primary = WM831X_RTC_INT,
148 .reg = 1,
149 .mask = WM831X_RTC_PER_EINT,
150 },
151 [WM831X_IRQ_RTC_ALM] = {
152 .primary = WM831X_RTC_INT,
153 .reg = 1,
154 .mask = WM831X_RTC_ALM_EINT,
155 },
156 [WM831X_IRQ_CHG_BATT_HOT] = {
157 .primary = WM831X_CHG_INT,
158 .reg = 2,
159 .mask = WM831X_CHG_BATT_HOT_EINT,
160 },
161 [WM831X_IRQ_CHG_BATT_COLD] = {
162 .primary = WM831X_CHG_INT,
163 .reg = 2,
164 .mask = WM831X_CHG_BATT_COLD_EINT,
165 },
166 [WM831X_IRQ_CHG_BATT_FAIL] = {
167 .primary = WM831X_CHG_INT,
168 .reg = 2,
169 .mask = WM831X_CHG_BATT_FAIL_EINT,
170 },
171 [WM831X_IRQ_CHG_OV] = {
172 .primary = WM831X_CHG_INT,
173 .reg = 2,
174 .mask = WM831X_CHG_OV_EINT,
175 },
176 [WM831X_IRQ_CHG_END] = {
177 .primary = WM831X_CHG_INT,
178 .reg = 2,
179 .mask = WM831X_CHG_END_EINT,
180 },
181 [WM831X_IRQ_CHG_TO] = {
182 .primary = WM831X_CHG_INT,
183 .reg = 2,
184 .mask = WM831X_CHG_TO_EINT,
185 },
186 [WM831X_IRQ_CHG_MODE] = {
187 .primary = WM831X_CHG_INT,
188 .reg = 2,
189 .mask = WM831X_CHG_MODE_EINT,
190 },
191 [WM831X_IRQ_CHG_START] = {
192 .primary = WM831X_CHG_INT,
193 .reg = 2,
194 .mask = WM831X_CHG_START_EINT,
195 },
196 [WM831X_IRQ_TCHDATA] = {
197 .primary = WM831X_TCHDATA_INT,
198 .reg = 1,
199 .mask = WM831X_TCHDATA_EINT,
200 },
201 [WM831X_IRQ_TCHPD] = {
202 .primary = WM831X_TCHPD_INT,
203 .reg = 1,
204 .mask = WM831X_TCHPD_EINT,
205 },
206 [WM831X_IRQ_AUXADC_DATA] = {
207 .primary = WM831X_AUXADC_INT,
208 .reg = 1,
209 .mask = WM831X_AUXADC_DATA_EINT,
210 },
211 [WM831X_IRQ_AUXADC_DCOMP1] = {
212 .primary = WM831X_AUXADC_INT,
213 .reg = 1,
214 .mask = WM831X_AUXADC_DCOMP1_EINT,
215 },
216 [WM831X_IRQ_AUXADC_DCOMP2] = {
217 .primary = WM831X_AUXADC_INT,
218 .reg = 1,
219 .mask = WM831X_AUXADC_DCOMP2_EINT,
220 },
221 [WM831X_IRQ_AUXADC_DCOMP3] = {
222 .primary = WM831X_AUXADC_INT,
223 .reg = 1,
224 .mask = WM831X_AUXADC_DCOMP3_EINT,
225 },
226 [WM831X_IRQ_AUXADC_DCOMP4] = {
227 .primary = WM831X_AUXADC_INT,
228 .reg = 1,
229 .mask = WM831X_AUXADC_DCOMP4_EINT,
230 },
231 [WM831X_IRQ_CS1] = {
232 .primary = WM831X_CS_INT,
233 .reg = 2,
234 .mask = WM831X_CS1_EINT,
235 },
236 [WM831X_IRQ_CS2] = {
237 .primary = WM831X_CS_INT,
238 .reg = 2,
239 .mask = WM831X_CS2_EINT,
240 },
241 [WM831X_IRQ_HC_DC1] = {
242 .primary = WM831X_HC_INT,
243 .reg = 4,
244 .mask = WM831X_HC_DC1_EINT,
245 },
246 [WM831X_IRQ_HC_DC2] = {
247 .primary = WM831X_HC_INT,
248 .reg = 4,
249 .mask = WM831X_HC_DC2_EINT,
250 },
251 [WM831X_IRQ_UV_LDO1] = {
252 .primary = WM831X_UV_INT,
253 .reg = 3,
254 .mask = WM831X_UV_LDO1_EINT,
255 },
256 [WM831X_IRQ_UV_LDO2] = {
257 .primary = WM831X_UV_INT,
258 .reg = 3,
259 .mask = WM831X_UV_LDO2_EINT,
260 },
261 [WM831X_IRQ_UV_LDO3] = {
262 .primary = WM831X_UV_INT,
263 .reg = 3,
264 .mask = WM831X_UV_LDO3_EINT,
265 },
266 [WM831X_IRQ_UV_LDO4] = {
267 .primary = WM831X_UV_INT,
268 .reg = 3,
269 .mask = WM831X_UV_LDO4_EINT,
270 },
271 [WM831X_IRQ_UV_LDO5] = {
272 .primary = WM831X_UV_INT,
273 .reg = 3,
274 .mask = WM831X_UV_LDO5_EINT,
275 },
276 [WM831X_IRQ_UV_LDO6] = {
277 .primary = WM831X_UV_INT,
278 .reg = 3,
279 .mask = WM831X_UV_LDO6_EINT,
280 },
281 [WM831X_IRQ_UV_LDO7] = {
282 .primary = WM831X_UV_INT,
283 .reg = 3,
284 .mask = WM831X_UV_LDO7_EINT,
285 },
286 [WM831X_IRQ_UV_LDO8] = {
287 .primary = WM831X_UV_INT,
288 .reg = 3,
289 .mask = WM831X_UV_LDO8_EINT,
290 },
291 [WM831X_IRQ_UV_LDO9] = {
292 .primary = WM831X_UV_INT,
293 .reg = 3,
294 .mask = WM831X_UV_LDO9_EINT,
295 },
296 [WM831X_IRQ_UV_LDO10] = {
297 .primary = WM831X_UV_INT,
298 .reg = 3,
299 .mask = WM831X_UV_LDO10_EINT,
300 },
301 [WM831X_IRQ_UV_DC1] = {
302 .primary = WM831X_UV_INT,
303 .reg = 4,
304 .mask = WM831X_UV_DC1_EINT,
305 },
306 [WM831X_IRQ_UV_DC2] = {
307 .primary = WM831X_UV_INT,
308 .reg = 4,
309 .mask = WM831X_UV_DC2_EINT,
310 },
311 [WM831X_IRQ_UV_DC3] = {
312 .primary = WM831X_UV_INT,
313 .reg = 4,
314 .mask = WM831X_UV_DC3_EINT,
315 },
316 [WM831X_IRQ_UV_DC4] = {
317 .primary = WM831X_UV_INT,
318 .reg = 4,
319 .mask = WM831X_UV_DC4_EINT,
320 },
321};
322
323static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
324{
325 return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
326}
327
328static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
329{
330 return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
331}
332
333static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
334 int irq)
335{
336 return &wm831x_irqs[irq - wm831x->irq_base];
337}
338
339static void wm831x_irq_lock(struct irq_data *data)
340{
341 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
342
343 mutex_lock(&wm831x->irq_lock);
344}
345
346static void wm831x_irq_sync_unlock(struct irq_data *data)
347{
348 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
349 int i;
350
351 for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
352 if (wm831x->gpio_update[i]) {
353 wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
354 WM831X_GPN_INT_MODE | WM831X_GPN_POL,
355 wm831x->gpio_update[i]);
356 wm831x->gpio_update[i] = 0;
357 }
358 }
359
360 for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
361 /* If there's been a change in the mask write it back
362 * to the hardware. */
363 if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
364 dev_dbg(wm831x->dev, "IRQ mask sync: %x = %x\n",
365 WM831X_INTERRUPT_STATUS_1_MASK + i,
366 wm831x->irq_masks_cur[i]);
367
368 wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
369 wm831x_reg_write(wm831x,
370 WM831X_INTERRUPT_STATUS_1_MASK + i,
371 wm831x->irq_masks_cur[i]);
372 }
373 }
374
375 mutex_unlock(&wm831x->irq_lock);
376}
377
378static void wm831x_irq_enable(struct irq_data *data)
379{
380 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
381 struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
382 data->irq);
383
384 wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
385}
386
387static void wm831x_irq_disable(struct irq_data *data)
388{
389 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
390 struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
391 data->irq);
392
393 wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
394}
395
396static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
397{
398 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
399 int irq;
400
401 irq = data->irq - wm831x->irq_base;
402
403 if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
404 /* Ignore internal-only IRQs */
405 if (irq >= 0 && irq < WM831X_NUM_IRQS)
406 return 0;
407 else
408 return -EINVAL;
409 }
410
411 /* Rebase the IRQ into the GPIO range so we've got a sensible array
412 * index.
413 */
414 irq -= WM831X_IRQ_GPIO_1;
415
416 /* We set the high bit to flag that we need an update; don't
417 * do the update here as we can be called with the bus lock
418 * held.
419 */
420 switch (type) {
421 case IRQ_TYPE_EDGE_BOTH:
422 wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
423 break;
424 case IRQ_TYPE_EDGE_RISING:
425 wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
426 break;
427 case IRQ_TYPE_EDGE_FALLING:
428 wm831x->gpio_update[irq] = 0x10000;
429 break;
430 default:
431 return -EINVAL;
432 }
433
434 return 0;
435}
436
437static struct irq_chip wm831x_irq_chip = {
438 .name = "wm831x",
439 .irq_bus_lock = wm831x_irq_lock,
440 .irq_bus_sync_unlock = wm831x_irq_sync_unlock,
441 .irq_disable = wm831x_irq_disable,
442 .irq_enable = wm831x_irq_enable,
443 .irq_set_type = wm831x_irq_set_type,
444};
445
446/* The processing of the primary interrupt occurs in a thread so that
447 * we can interact with the device over I2C or SPI. */
448static irqreturn_t wm831x_irq_thread(int irq, void *data)
449{
450 struct wm831x *wm831x = data;
451 unsigned int i;
452 int primary, status_addr;
453 int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
454 int read[WM831X_NUM_IRQ_REGS] = { 0 };
455 int *status;
456
457 primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
458 if (primary < 0) {
459 dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
460 primary);
461 goto out;
462 }
463
464 /* The touch interrupts are visible in the primary register as
465 * an optimisation; open code this to avoid complicating the
466 * main handling loop and so we can also skip iterating the
467 * descriptors.
468 */
469 if (primary & WM831X_TCHPD_INT)
470 handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHPD);
471 if (primary & WM831X_TCHDATA_INT)
472 handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHDATA);
473 if (primary & (WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT))
474 goto out;
475
476 for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
477 int offset = wm831x_irqs[i].reg - 1;
478
479 if (!(primary & wm831x_irqs[i].primary))
480 continue;
481
482 status = &status_regs[offset];
483
484 /* Hopefully there should only be one register to read
485 * each time otherwise we ought to do a block read. */
486 if (!read[offset]) {
487 status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);
488
489 *status = wm831x_reg_read(wm831x, status_addr);
490 if (*status < 0) {
491 dev_err(wm831x->dev,
492 "Failed to read IRQ status: %d\n",
493 *status);
494 goto out;
495 }
496
497 read[offset] = 1;
498
499 /* Ignore any bits that we don't think are masked */
500 *status &= ~wm831x->irq_masks_cur[offset];
501
502 /* Acknowledge now so we don't miss
503 * notifications while we handle.
504 */
505 wm831x_reg_write(wm831x, status_addr, *status);
506 }
507
508 if (*status & wm831x_irqs[i].mask)
509 handle_nested_irq(wm831x->irq_base + i);
510 }
511
512out:
513 return IRQ_HANDLED;
514}
515
516int wm831x_irq_init(struct wm831x *wm831x, int irq)
517{
518 struct wm831x_pdata *pdata = wm831x->dev->platform_data;
519 int i, cur_irq, ret;
520
521 mutex_init(&wm831x->irq_lock);
522
523 /* Mask the individual interrupt sources */
524 for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
525 wm831x->irq_masks_cur[i] = 0xffff;
526 wm831x->irq_masks_cache[i] = 0xffff;
527 wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
528 0xffff);
529 }
530
531 /* Try to dynamically allocate IRQs if no base is specified */
532 if (!pdata || !pdata->irq_base)
533 wm831x->irq_base = -1;
534 else
535 wm831x->irq_base = pdata->irq_base;
536
537 wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0,
538 WM831X_NUM_IRQS, 0);
539 if (wm831x->irq_base < 0) {
540 dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n",
541 wm831x->irq_base);
542 wm831x->irq_base = 0;
543 return 0;
544 }
545
546 if (pdata && pdata->irq_cmos)
547 i = 0;
548 else
549 i = WM831X_IRQ_OD;
550
551 wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
552 WM831X_IRQ_OD, i);
553
554 /* Try to flag /IRQ as a wake source; there are a number of
555 * unconditional wake sources in the PMIC so this isn't
556 * conditional but we don't actually care *too* much if it
557 * fails.
558 */
559 ret = enable_irq_wake(irq);
560 if (ret != 0) {
561 dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n",
562 ret);
563 }
564
565 wm831x->irq = irq;
566
567 /* Register them with genirq */
568 for (cur_irq = wm831x->irq_base;
569 cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
570 cur_irq++) {
571 irq_set_chip_data(cur_irq, wm831x);
572 irq_set_chip_and_handler(cur_irq, &wm831x_irq_chip,
573 handle_edge_irq);
574 irq_set_nested_thread(cur_irq, 1);
575
576 /* ARM needs us to explicitly flag the IRQ as valid
577 * and will set them noprobe when we do so. */
578#ifdef CONFIG_ARM
579 set_irq_flags(cur_irq, IRQF_VALID);
580#else
581 irq_set_noprobe(cur_irq);
582#endif
583 }
584
585 if (irq) {
586 ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
587 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
588 "wm831x", wm831x);
589 if (ret != 0) {
590 dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
591 irq, ret);
592 return ret;
593 }
594 } else {
595 dev_warn(wm831x->dev,
596 "No interrupt specified - functionality limited\n");
597 }
598
599
600
601 /* Enable top level interrupts, we mask at secondary level */
602 wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
603
604 return 0;
605}
606
607void wm831x_irq_exit(struct wm831x *wm831x)
608{
609 if (wm831x->irq)
610 free_irq(wm831x->irq, wm831x);
611}
1/*
2 * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
3 *
4 * Copyright 2009 Wolfson Microelectronics PLC.
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 *
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/i2c.h>
18#include <linux/irq.h>
19#include <linux/mfd/core.h>
20#include <linux/interrupt.h>
21#include <linux/irqdomain.h>
22
23#include <linux/mfd/wm831x/core.h>
24#include <linux/mfd/wm831x/pdata.h>
25#include <linux/mfd/wm831x/gpio.h>
26#include <linux/mfd/wm831x/irq.h>
27
28#include <linux/delay.h>
29
30struct wm831x_irq_data {
31 int primary;
32 int reg;
33 int mask;
34};
35
36static struct wm831x_irq_data wm831x_irqs[] = {
37 [WM831X_IRQ_TEMP_THW] = {
38 .primary = WM831X_TEMP_INT,
39 .reg = 1,
40 .mask = WM831X_TEMP_THW_EINT,
41 },
42 [WM831X_IRQ_GPIO_1] = {
43 .primary = WM831X_GP_INT,
44 .reg = 5,
45 .mask = WM831X_GP1_EINT,
46 },
47 [WM831X_IRQ_GPIO_2] = {
48 .primary = WM831X_GP_INT,
49 .reg = 5,
50 .mask = WM831X_GP2_EINT,
51 },
52 [WM831X_IRQ_GPIO_3] = {
53 .primary = WM831X_GP_INT,
54 .reg = 5,
55 .mask = WM831X_GP3_EINT,
56 },
57 [WM831X_IRQ_GPIO_4] = {
58 .primary = WM831X_GP_INT,
59 .reg = 5,
60 .mask = WM831X_GP4_EINT,
61 },
62 [WM831X_IRQ_GPIO_5] = {
63 .primary = WM831X_GP_INT,
64 .reg = 5,
65 .mask = WM831X_GP5_EINT,
66 },
67 [WM831X_IRQ_GPIO_6] = {
68 .primary = WM831X_GP_INT,
69 .reg = 5,
70 .mask = WM831X_GP6_EINT,
71 },
72 [WM831X_IRQ_GPIO_7] = {
73 .primary = WM831X_GP_INT,
74 .reg = 5,
75 .mask = WM831X_GP7_EINT,
76 },
77 [WM831X_IRQ_GPIO_8] = {
78 .primary = WM831X_GP_INT,
79 .reg = 5,
80 .mask = WM831X_GP8_EINT,
81 },
82 [WM831X_IRQ_GPIO_9] = {
83 .primary = WM831X_GP_INT,
84 .reg = 5,
85 .mask = WM831X_GP9_EINT,
86 },
87 [WM831X_IRQ_GPIO_10] = {
88 .primary = WM831X_GP_INT,
89 .reg = 5,
90 .mask = WM831X_GP10_EINT,
91 },
92 [WM831X_IRQ_GPIO_11] = {
93 .primary = WM831X_GP_INT,
94 .reg = 5,
95 .mask = WM831X_GP11_EINT,
96 },
97 [WM831X_IRQ_GPIO_12] = {
98 .primary = WM831X_GP_INT,
99 .reg = 5,
100 .mask = WM831X_GP12_EINT,
101 },
102 [WM831X_IRQ_GPIO_13] = {
103 .primary = WM831X_GP_INT,
104 .reg = 5,
105 .mask = WM831X_GP13_EINT,
106 },
107 [WM831X_IRQ_GPIO_14] = {
108 .primary = WM831X_GP_INT,
109 .reg = 5,
110 .mask = WM831X_GP14_EINT,
111 },
112 [WM831X_IRQ_GPIO_15] = {
113 .primary = WM831X_GP_INT,
114 .reg = 5,
115 .mask = WM831X_GP15_EINT,
116 },
117 [WM831X_IRQ_GPIO_16] = {
118 .primary = WM831X_GP_INT,
119 .reg = 5,
120 .mask = WM831X_GP16_EINT,
121 },
122 [WM831X_IRQ_ON] = {
123 .primary = WM831X_ON_PIN_INT,
124 .reg = 1,
125 .mask = WM831X_ON_PIN_EINT,
126 },
127 [WM831X_IRQ_PPM_SYSLO] = {
128 .primary = WM831X_PPM_INT,
129 .reg = 1,
130 .mask = WM831X_PPM_SYSLO_EINT,
131 },
132 [WM831X_IRQ_PPM_PWR_SRC] = {
133 .primary = WM831X_PPM_INT,
134 .reg = 1,
135 .mask = WM831X_PPM_PWR_SRC_EINT,
136 },
137 [WM831X_IRQ_PPM_USB_CURR] = {
138 .primary = WM831X_PPM_INT,
139 .reg = 1,
140 .mask = WM831X_PPM_USB_CURR_EINT,
141 },
142 [WM831X_IRQ_WDOG_TO] = {
143 .primary = WM831X_WDOG_INT,
144 .reg = 1,
145 .mask = WM831X_WDOG_TO_EINT,
146 },
147 [WM831X_IRQ_RTC_PER] = {
148 .primary = WM831X_RTC_INT,
149 .reg = 1,
150 .mask = WM831X_RTC_PER_EINT,
151 },
152 [WM831X_IRQ_RTC_ALM] = {
153 .primary = WM831X_RTC_INT,
154 .reg = 1,
155 .mask = WM831X_RTC_ALM_EINT,
156 },
157 [WM831X_IRQ_CHG_BATT_HOT] = {
158 .primary = WM831X_CHG_INT,
159 .reg = 2,
160 .mask = WM831X_CHG_BATT_HOT_EINT,
161 },
162 [WM831X_IRQ_CHG_BATT_COLD] = {
163 .primary = WM831X_CHG_INT,
164 .reg = 2,
165 .mask = WM831X_CHG_BATT_COLD_EINT,
166 },
167 [WM831X_IRQ_CHG_BATT_FAIL] = {
168 .primary = WM831X_CHG_INT,
169 .reg = 2,
170 .mask = WM831X_CHG_BATT_FAIL_EINT,
171 },
172 [WM831X_IRQ_CHG_OV] = {
173 .primary = WM831X_CHG_INT,
174 .reg = 2,
175 .mask = WM831X_CHG_OV_EINT,
176 },
177 [WM831X_IRQ_CHG_END] = {
178 .primary = WM831X_CHG_INT,
179 .reg = 2,
180 .mask = WM831X_CHG_END_EINT,
181 },
182 [WM831X_IRQ_CHG_TO] = {
183 .primary = WM831X_CHG_INT,
184 .reg = 2,
185 .mask = WM831X_CHG_TO_EINT,
186 },
187 [WM831X_IRQ_CHG_MODE] = {
188 .primary = WM831X_CHG_INT,
189 .reg = 2,
190 .mask = WM831X_CHG_MODE_EINT,
191 },
192 [WM831X_IRQ_CHG_START] = {
193 .primary = WM831X_CHG_INT,
194 .reg = 2,
195 .mask = WM831X_CHG_START_EINT,
196 },
197 [WM831X_IRQ_TCHDATA] = {
198 .primary = WM831X_TCHDATA_INT,
199 .reg = 1,
200 .mask = WM831X_TCHDATA_EINT,
201 },
202 [WM831X_IRQ_TCHPD] = {
203 .primary = WM831X_TCHPD_INT,
204 .reg = 1,
205 .mask = WM831X_TCHPD_EINT,
206 },
207 [WM831X_IRQ_AUXADC_DATA] = {
208 .primary = WM831X_AUXADC_INT,
209 .reg = 1,
210 .mask = WM831X_AUXADC_DATA_EINT,
211 },
212 [WM831X_IRQ_AUXADC_DCOMP1] = {
213 .primary = WM831X_AUXADC_INT,
214 .reg = 1,
215 .mask = WM831X_AUXADC_DCOMP1_EINT,
216 },
217 [WM831X_IRQ_AUXADC_DCOMP2] = {
218 .primary = WM831X_AUXADC_INT,
219 .reg = 1,
220 .mask = WM831X_AUXADC_DCOMP2_EINT,
221 },
222 [WM831X_IRQ_AUXADC_DCOMP3] = {
223 .primary = WM831X_AUXADC_INT,
224 .reg = 1,
225 .mask = WM831X_AUXADC_DCOMP3_EINT,
226 },
227 [WM831X_IRQ_AUXADC_DCOMP4] = {
228 .primary = WM831X_AUXADC_INT,
229 .reg = 1,
230 .mask = WM831X_AUXADC_DCOMP4_EINT,
231 },
232 [WM831X_IRQ_CS1] = {
233 .primary = WM831X_CS_INT,
234 .reg = 2,
235 .mask = WM831X_CS1_EINT,
236 },
237 [WM831X_IRQ_CS2] = {
238 .primary = WM831X_CS_INT,
239 .reg = 2,
240 .mask = WM831X_CS2_EINT,
241 },
242 [WM831X_IRQ_HC_DC1] = {
243 .primary = WM831X_HC_INT,
244 .reg = 4,
245 .mask = WM831X_HC_DC1_EINT,
246 },
247 [WM831X_IRQ_HC_DC2] = {
248 .primary = WM831X_HC_INT,
249 .reg = 4,
250 .mask = WM831X_HC_DC2_EINT,
251 },
252 [WM831X_IRQ_UV_LDO1] = {
253 .primary = WM831X_UV_INT,
254 .reg = 3,
255 .mask = WM831X_UV_LDO1_EINT,
256 },
257 [WM831X_IRQ_UV_LDO2] = {
258 .primary = WM831X_UV_INT,
259 .reg = 3,
260 .mask = WM831X_UV_LDO2_EINT,
261 },
262 [WM831X_IRQ_UV_LDO3] = {
263 .primary = WM831X_UV_INT,
264 .reg = 3,
265 .mask = WM831X_UV_LDO3_EINT,
266 },
267 [WM831X_IRQ_UV_LDO4] = {
268 .primary = WM831X_UV_INT,
269 .reg = 3,
270 .mask = WM831X_UV_LDO4_EINT,
271 },
272 [WM831X_IRQ_UV_LDO5] = {
273 .primary = WM831X_UV_INT,
274 .reg = 3,
275 .mask = WM831X_UV_LDO5_EINT,
276 },
277 [WM831X_IRQ_UV_LDO6] = {
278 .primary = WM831X_UV_INT,
279 .reg = 3,
280 .mask = WM831X_UV_LDO6_EINT,
281 },
282 [WM831X_IRQ_UV_LDO7] = {
283 .primary = WM831X_UV_INT,
284 .reg = 3,
285 .mask = WM831X_UV_LDO7_EINT,
286 },
287 [WM831X_IRQ_UV_LDO8] = {
288 .primary = WM831X_UV_INT,
289 .reg = 3,
290 .mask = WM831X_UV_LDO8_EINT,
291 },
292 [WM831X_IRQ_UV_LDO9] = {
293 .primary = WM831X_UV_INT,
294 .reg = 3,
295 .mask = WM831X_UV_LDO9_EINT,
296 },
297 [WM831X_IRQ_UV_LDO10] = {
298 .primary = WM831X_UV_INT,
299 .reg = 3,
300 .mask = WM831X_UV_LDO10_EINT,
301 },
302 [WM831X_IRQ_UV_DC1] = {
303 .primary = WM831X_UV_INT,
304 .reg = 4,
305 .mask = WM831X_UV_DC1_EINT,
306 },
307 [WM831X_IRQ_UV_DC2] = {
308 .primary = WM831X_UV_INT,
309 .reg = 4,
310 .mask = WM831X_UV_DC2_EINT,
311 },
312 [WM831X_IRQ_UV_DC3] = {
313 .primary = WM831X_UV_INT,
314 .reg = 4,
315 .mask = WM831X_UV_DC3_EINT,
316 },
317 [WM831X_IRQ_UV_DC4] = {
318 .primary = WM831X_UV_INT,
319 .reg = 4,
320 .mask = WM831X_UV_DC4_EINT,
321 },
322};
323
324static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
325{
326 return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
327}
328
329static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
330 int irq)
331{
332 return &wm831x_irqs[irq];
333}
334
335static void wm831x_irq_lock(struct irq_data *data)
336{
337 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
338
339 mutex_lock(&wm831x->irq_lock);
340}
341
342static void wm831x_irq_sync_unlock(struct irq_data *data)
343{
344 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
345 int i;
346
347 for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
348 if (wm831x->gpio_update[i]) {
349 wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
350 WM831X_GPN_INT_MODE | WM831X_GPN_POL,
351 wm831x->gpio_update[i]);
352 wm831x->gpio_update[i] = 0;
353 }
354 }
355
356 for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
357 /* If there's been a change in the mask write it back
358 * to the hardware. */
359 if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
360 dev_dbg(wm831x->dev, "IRQ mask sync: %x = %x\n",
361 WM831X_INTERRUPT_STATUS_1_MASK + i,
362 wm831x->irq_masks_cur[i]);
363
364 wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
365 wm831x_reg_write(wm831x,
366 WM831X_INTERRUPT_STATUS_1_MASK + i,
367 wm831x->irq_masks_cur[i]);
368 }
369 }
370
371 mutex_unlock(&wm831x->irq_lock);
372}
373
374static void wm831x_irq_enable(struct irq_data *data)
375{
376 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
377 struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
378 data->hwirq);
379
380 wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
381}
382
383static void wm831x_irq_disable(struct irq_data *data)
384{
385 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
386 struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
387 data->hwirq);
388
389 wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
390}
391
392static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
393{
394 struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
395 int irq;
396
397 irq = data->hwirq;
398
399 if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
400 /* Ignore internal-only IRQs */
401 if (irq >= 0 && irq < WM831X_NUM_IRQS)
402 return 0;
403 else
404 return -EINVAL;
405 }
406
407 /* Rebase the IRQ into the GPIO range so we've got a sensible array
408 * index.
409 */
410 irq -= WM831X_IRQ_GPIO_1;
411
412 /* We set the high bit to flag that we need an update; don't
413 * do the update here as we can be called with the bus lock
414 * held.
415 */
416 wm831x->gpio_level_low[irq] = false;
417 wm831x->gpio_level_high[irq] = false;
418 switch (type) {
419 case IRQ_TYPE_EDGE_BOTH:
420 wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
421 break;
422 case IRQ_TYPE_EDGE_RISING:
423 wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
424 break;
425 case IRQ_TYPE_EDGE_FALLING:
426 wm831x->gpio_update[irq] = 0x10000;
427 break;
428 case IRQ_TYPE_LEVEL_HIGH:
429 wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
430 wm831x->gpio_level_high[irq] = true;
431 break;
432 case IRQ_TYPE_LEVEL_LOW:
433 wm831x->gpio_update[irq] = 0x10000;
434 wm831x->gpio_level_low[irq] = true;
435 break;
436 default:
437 return -EINVAL;
438 }
439
440 return 0;
441}
442
443static struct irq_chip wm831x_irq_chip = {
444 .name = "wm831x",
445 .irq_bus_lock = wm831x_irq_lock,
446 .irq_bus_sync_unlock = wm831x_irq_sync_unlock,
447 .irq_disable = wm831x_irq_disable,
448 .irq_enable = wm831x_irq_enable,
449 .irq_set_type = wm831x_irq_set_type,
450};
451
452/* The processing of the primary interrupt occurs in a thread so that
453 * we can interact with the device over I2C or SPI. */
454static irqreturn_t wm831x_irq_thread(int irq, void *data)
455{
456 struct wm831x *wm831x = data;
457 unsigned int i;
458 int primary, status_addr, ret;
459 int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
460 int read[WM831X_NUM_IRQ_REGS] = { 0 };
461 int *status;
462
463 primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
464 if (primary < 0) {
465 dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
466 primary);
467 goto out;
468 }
469
470 /* The touch interrupts are visible in the primary register as
471 * an optimisation; open code this to avoid complicating the
472 * main handling loop and so we can also skip iterating the
473 * descriptors.
474 */
475 if (primary & WM831X_TCHPD_INT)
476 handle_nested_irq(irq_find_mapping(wm831x->irq_domain,
477 WM831X_IRQ_TCHPD));
478 if (primary & WM831X_TCHDATA_INT)
479 handle_nested_irq(irq_find_mapping(wm831x->irq_domain,
480 WM831X_IRQ_TCHDATA));
481 primary &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT);
482
483 for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
484 int offset = wm831x_irqs[i].reg - 1;
485
486 if (!(primary & wm831x_irqs[i].primary))
487 continue;
488
489 status = &status_regs[offset];
490
491 /* Hopefully there should only be one register to read
492 * each time otherwise we ought to do a block read. */
493 if (!read[offset]) {
494 status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);
495
496 *status = wm831x_reg_read(wm831x, status_addr);
497 if (*status < 0) {
498 dev_err(wm831x->dev,
499 "Failed to read IRQ status: %d\n",
500 *status);
501 goto out;
502 }
503
504 read[offset] = 1;
505
506 /* Ignore any bits that we don't think are masked */
507 *status &= ~wm831x->irq_masks_cur[offset];
508
509 /* Acknowledge now so we don't miss
510 * notifications while we handle.
511 */
512 wm831x_reg_write(wm831x, status_addr, *status);
513 }
514
515 if (*status & wm831x_irqs[i].mask)
516 handle_nested_irq(irq_find_mapping(wm831x->irq_domain,
517 i));
518
519 /* Simulate an edge triggered IRQ by polling the input
520 * status. This is sucky but improves interoperability.
521 */
522 if (primary == WM831X_GP_INT &&
523 wm831x->gpio_level_high[i - WM831X_IRQ_GPIO_1]) {
524 ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
525 while (ret & 1 << (i - WM831X_IRQ_GPIO_1)) {
526 handle_nested_irq(irq_find_mapping(wm831x->irq_domain,
527 i));
528 ret = wm831x_reg_read(wm831x,
529 WM831X_GPIO_LEVEL);
530 }
531 }
532
533 if (primary == WM831X_GP_INT &&
534 wm831x->gpio_level_low[i - WM831X_IRQ_GPIO_1]) {
535 ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
536 while (!(ret & 1 << (i - WM831X_IRQ_GPIO_1))) {
537 handle_nested_irq(irq_find_mapping(wm831x->irq_domain,
538 i));
539 ret = wm831x_reg_read(wm831x,
540 WM831X_GPIO_LEVEL);
541 }
542 }
543 }
544
545out:
546 return IRQ_HANDLED;
547}
548
549static int wm831x_irq_map(struct irq_domain *h, unsigned int virq,
550 irq_hw_number_t hw)
551{
552 irq_set_chip_data(virq, h->host_data);
553 irq_set_chip_and_handler(virq, &wm831x_irq_chip, handle_edge_irq);
554 irq_set_nested_thread(virq, 1);
555
556 /* ARM needs us to explicitly flag the IRQ as valid
557 * and will set them noprobe when we do so. */
558#ifdef CONFIG_ARM
559 set_irq_flags(virq, IRQF_VALID);
560#else
561 irq_set_noprobe(virq);
562#endif
563
564 return 0;
565}
566
567static struct irq_domain_ops wm831x_irq_domain_ops = {
568 .map = wm831x_irq_map,
569 .xlate = irq_domain_xlate_twocell,
570};
571
572int wm831x_irq_init(struct wm831x *wm831x, int irq)
573{
574 struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
575 struct irq_domain *domain;
576 int i, ret, irq_base;
577
578 mutex_init(&wm831x->irq_lock);
579
580 /* Mask the individual interrupt sources */
581 for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
582 wm831x->irq_masks_cur[i] = 0xffff;
583 wm831x->irq_masks_cache[i] = 0xffff;
584 wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
585 0xffff);
586 }
587
588 /* Try to dynamically allocate IRQs if no base is specified */
589 if (pdata && pdata->irq_base) {
590 irq_base = irq_alloc_descs(pdata->irq_base, 0,
591 WM831X_NUM_IRQS, 0);
592 if (irq_base < 0) {
593 dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n",
594 irq_base);
595 irq_base = 0;
596 }
597 } else {
598 irq_base = 0;
599 }
600
601 if (irq_base)
602 domain = irq_domain_add_legacy(wm831x->dev->of_node,
603 ARRAY_SIZE(wm831x_irqs),
604 irq_base, 0,
605 &wm831x_irq_domain_ops,
606 wm831x);
607 else
608 domain = irq_domain_add_linear(wm831x->dev->of_node,
609 ARRAY_SIZE(wm831x_irqs),
610 &wm831x_irq_domain_ops,
611 wm831x);
612
613 if (!domain) {
614 dev_warn(wm831x->dev, "Failed to allocate IRQ domain\n");
615 return -EINVAL;
616 }
617
618 if (pdata && pdata->irq_cmos)
619 i = 0;
620 else
621 i = WM831X_IRQ_OD;
622
623 wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
624 WM831X_IRQ_OD, i);
625
626 wm831x->irq = irq;
627 wm831x->irq_domain = domain;
628
629 if (irq) {
630 /* Try to flag /IRQ as a wake source; there are a number of
631 * unconditional wake sources in the PMIC so this isn't
632 * conditional but we don't actually care *too* much if it
633 * fails.
634 */
635 ret = enable_irq_wake(irq);
636 if (ret != 0) {
637 dev_warn(wm831x->dev,
638 "Can't enable IRQ as wake source: %d\n",
639 ret);
640 }
641
642 ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
643 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
644 "wm831x", wm831x);
645 if (ret != 0) {
646 dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
647 irq, ret);
648 return ret;
649 }
650 } else {
651 dev_warn(wm831x->dev,
652 "No interrupt specified - functionality limited\n");
653 }
654
655 /* Enable top level interrupts, we mask at secondary level */
656 wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
657
658 return 0;
659}
660
661void wm831x_irq_exit(struct wm831x *wm831x)
662{
663 if (wm831x->irq)
664 free_irq(wm831x->irq, wm831x);
665}