Linux Audio

Check our new training course

Buildroot integration, development and maintenance

Need a Buildroot system for your embedded project?
Loading...
v3.1
  1/*
  2 * drivers/base/power/sysfs.c - sysfs entries for device PM
  3 */
  4
  5#include <linux/device.h>
  6#include <linux/string.h>
  7#include <linux/pm_runtime.h>
  8#include <linux/atomic.h>
  9#include <linux/jiffies.h>
 10#include "power.h"
 11
 12/*
 13 *	control - Report/change current runtime PM setting of the device
 14 *
 15 *	Runtime power management of a device can be blocked with the help of
 16 *	this attribute.  All devices have one of the following two values for
 17 *	the power/control file:
 18 *
 19 *	 + "auto\n" to allow the device to be power managed at run time;
 20 *	 + "on\n" to prevent the device from being power managed at run time;
 21 *
 22 *	The default for all devices is "auto", which means that devices may be
 23 *	subject to automatic power management, depending on their drivers.
 24 *	Changing this attribute to "on" prevents the driver from power managing
 25 *	the device at run time.  Doing that while the device is suspended causes
 26 *	it to be woken up.
 27 *
 28 *	wakeup - Report/change current wakeup option for device
 29 *
 30 *	Some devices support "wakeup" events, which are hardware signals
 31 *	used to activate devices from suspended or low power states.  Such
 32 *	devices have one of three values for the sysfs power/wakeup file:
 33 *
 34 *	 + "enabled\n" to issue the events;
 35 *	 + "disabled\n" not to do so; or
 36 *	 + "\n" for temporary or permanent inability to issue wakeup.
 37 *
 38 *	(For example, unconfigured USB devices can't issue wakeups.)
 39 *
 40 *	Familiar examples of devices that can issue wakeup events include
 41 *	keyboards and mice (both PS2 and USB styles), power buttons, modems,
 42 *	"Wake-On-LAN" Ethernet links, GPIO lines, and more.  Some events
 43 *	will wake the entire system from a suspend state; others may just
 44 *	wake up the device (if the system as a whole is already active).
 45 *	Some wakeup events use normal IRQ lines; other use special out
 46 *	of band signaling.
 47 *
 48 *	It is the responsibility of device drivers to enable (or disable)
 49 *	wakeup signaling as part of changing device power states, respecting
 50 *	the policy choices provided through the driver model.
 51 *
 52 *	Devices may not be able to generate wakeup events from all power
 53 *	states.  Also, the events may be ignored in some configurations;
 54 *	for example, they might need help from other devices that aren't
 55 *	active, or which may have wakeup disabled.  Some drivers rely on
 56 *	wakeup events internally (unless they are disabled), keeping
 57 *	their hardware in low power modes whenever they're unused.  This
 58 *	saves runtime power, without requiring system-wide sleep states.
 59 *
 60 *	async - Report/change current async suspend setting for the device
 61 *
 62 *	Asynchronous suspend and resume of the device during system-wide power
 63 *	state transitions can be enabled by writing "enabled" to this file.
 64 *	Analogously, if "disabled" is written to this file, the device will be
 65 *	suspended and resumed synchronously.
 66 *
 67 *	All devices have one of the following two values for power/async:
 68 *
 69 *	 + "enabled\n" to permit the asynchronous suspend/resume of the device;
 70 *	 + "disabled\n" to forbid it;
 71 *
 72 *	NOTE: It generally is unsafe to permit the asynchronous suspend/resume
 73 *	of a device unless it is certain that all of the PM dependencies of the
 74 *	device are known to the PM core.  However, for some devices this
 75 *	attribute is set to "enabled" by bus type code or device drivers and in
 76 *	that cases it should be safe to leave the default value.
 77 *
 78 *	autosuspend_delay_ms - Report/change a device's autosuspend_delay value
 79 *
 80 *	Some drivers don't want to carry out a runtime suspend as soon as a
 81 *	device becomes idle; they want it always to remain idle for some period
 82 *	of time before suspending it.  This period is the autosuspend_delay
 83 *	value (expressed in milliseconds) and it can be controlled by the user.
 84 *	If the value is negative then the device will never be runtime
 85 *	suspended.
 86 *
 87 *	NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay
 88 *	value are used only if the driver calls pm_runtime_use_autosuspend().
 89 *
 90 *	wakeup_count - Report the number of wakeup events related to the device
 91 */
 92
 93static const char enabled[] = "enabled";
 94static const char disabled[] = "disabled";
 95
 96const char power_group_name[] = "power";
 97EXPORT_SYMBOL_GPL(power_group_name);
 98
 99#ifdef CONFIG_PM_RUNTIME
100static const char ctrl_auto[] = "auto";
101static const char ctrl_on[] = "on";
102
103static ssize_t control_show(struct device *dev, struct device_attribute *attr,
104			    char *buf)
105{
106	return sprintf(buf, "%s\n",
107				dev->power.runtime_auto ? ctrl_auto : ctrl_on);
108}
109
110static ssize_t control_store(struct device * dev, struct device_attribute *attr,
111			     const char * buf, size_t n)
112{
113	char *cp;
114	int len = n;
115
116	cp = memchr(buf, '\n', n);
117	if (cp)
118		len = cp - buf;
119	device_lock(dev);
120	if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0)
121		pm_runtime_allow(dev);
122	else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0)
123		pm_runtime_forbid(dev);
124	else
125		n = -EINVAL;
126	device_unlock(dev);
127	return n;
128}
129
130static DEVICE_ATTR(control, 0644, control_show, control_store);
131
132static ssize_t rtpm_active_time_show(struct device *dev,
133				struct device_attribute *attr, char *buf)
134{
135	int ret;
136	spin_lock_irq(&dev->power.lock);
137	update_pm_runtime_accounting(dev);
138	ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies));
139	spin_unlock_irq(&dev->power.lock);
140	return ret;
141}
142
143static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL);
144
145static ssize_t rtpm_suspended_time_show(struct device *dev,
146				struct device_attribute *attr, char *buf)
147{
148	int ret;
149	spin_lock_irq(&dev->power.lock);
150	update_pm_runtime_accounting(dev);
151	ret = sprintf(buf, "%i\n",
152		jiffies_to_msecs(dev->power.suspended_jiffies));
153	spin_unlock_irq(&dev->power.lock);
154	return ret;
155}
156
157static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL);
158
159static ssize_t rtpm_status_show(struct device *dev,
160				struct device_attribute *attr, char *buf)
161{
162	const char *p;
163
164	if (dev->power.runtime_error) {
165		p = "error\n";
166	} else if (dev->power.disable_depth) {
167		p = "unsupported\n";
168	} else {
169		switch (dev->power.runtime_status) {
170		case RPM_SUSPENDED:
171			p = "suspended\n";
172			break;
173		case RPM_SUSPENDING:
174			p = "suspending\n";
175			break;
176		case RPM_RESUMING:
177			p = "resuming\n";
178			break;
179		case RPM_ACTIVE:
180			p = "active\n";
181			break;
182		default:
183			return -EIO;
184		}
185	}
186	return sprintf(buf, p);
187}
188
189static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
190
191static ssize_t autosuspend_delay_ms_show(struct device *dev,
192		struct device_attribute *attr, char *buf)
193{
194	if (!dev->power.use_autosuspend)
195		return -EIO;
196	return sprintf(buf, "%d\n", dev->power.autosuspend_delay);
197}
198
199static ssize_t autosuspend_delay_ms_store(struct device *dev,
200		struct device_attribute *attr, const char *buf, size_t n)
201{
202	long delay;
203
204	if (!dev->power.use_autosuspend)
205		return -EIO;
206
207	if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay)
208		return -EINVAL;
209
210	device_lock(dev);
211	pm_runtime_set_autosuspend_delay(dev, delay);
212	device_unlock(dev);
213	return n;
214}
215
216static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
217		autosuspend_delay_ms_store);
218
219#endif /* CONFIG_PM_RUNTIME */
220
221#ifdef CONFIG_PM_SLEEP
222static ssize_t
223wake_show(struct device * dev, struct device_attribute *attr, char * buf)
224{
225	return sprintf(buf, "%s\n", device_can_wakeup(dev)
226		? (device_may_wakeup(dev) ? enabled : disabled)
227		: "");
228}
229
230static ssize_t
231wake_store(struct device * dev, struct device_attribute *attr,
232	const char * buf, size_t n)
233{
234	char *cp;
235	int len = n;
236
237	if (!device_can_wakeup(dev))
238		return -EINVAL;
239
240	cp = memchr(buf, '\n', n);
241	if (cp)
242		len = cp - buf;
243	if (len == sizeof enabled - 1
244			&& strncmp(buf, enabled, sizeof enabled - 1) == 0)
245		device_set_wakeup_enable(dev, 1);
246	else if (len == sizeof disabled - 1
247			&& strncmp(buf, disabled, sizeof disabled - 1) == 0)
248		device_set_wakeup_enable(dev, 0);
249	else
250		return -EINVAL;
251	return n;
252}
253
254static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
255
256static ssize_t wakeup_count_show(struct device *dev,
257				struct device_attribute *attr, char *buf)
258{
259	unsigned long count = 0;
260	bool enabled = false;
261
262	spin_lock_irq(&dev->power.lock);
263	if (dev->power.wakeup) {
264		count = dev->power.wakeup->event_count;
265		enabled = true;
266	}
267	spin_unlock_irq(&dev->power.lock);
268	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
269}
270
271static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
272
273static ssize_t wakeup_active_count_show(struct device *dev,
274				struct device_attribute *attr, char *buf)
275{
276	unsigned long count = 0;
277	bool enabled = false;
278
279	spin_lock_irq(&dev->power.lock);
280	if (dev->power.wakeup) {
281		count = dev->power.wakeup->active_count;
282		enabled = true;
283	}
284	spin_unlock_irq(&dev->power.lock);
285	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
286}
287
288static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL);
289
290static ssize_t wakeup_hit_count_show(struct device *dev,
291				struct device_attribute *attr, char *buf)
292{
293	unsigned long count = 0;
294	bool enabled = false;
295
296	spin_lock_irq(&dev->power.lock);
297	if (dev->power.wakeup) {
298		count = dev->power.wakeup->hit_count;
299		enabled = true;
300	}
301	spin_unlock_irq(&dev->power.lock);
302	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
303}
304
305static DEVICE_ATTR(wakeup_hit_count, 0444, wakeup_hit_count_show, NULL);
306
307static ssize_t wakeup_active_show(struct device *dev,
308				struct device_attribute *attr, char *buf)
309{
310	unsigned int active = 0;
311	bool enabled = false;
312
313	spin_lock_irq(&dev->power.lock);
314	if (dev->power.wakeup) {
315		active = dev->power.wakeup->active;
316		enabled = true;
317	}
318	spin_unlock_irq(&dev->power.lock);
319	return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n");
320}
321
322static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL);
323
324static ssize_t wakeup_total_time_show(struct device *dev,
325				struct device_attribute *attr, char *buf)
326{
327	s64 msec = 0;
328	bool enabled = false;
329
330	spin_lock_irq(&dev->power.lock);
331	if (dev->power.wakeup) {
332		msec = ktime_to_ms(dev->power.wakeup->total_time);
333		enabled = true;
334	}
335	spin_unlock_irq(&dev->power.lock);
336	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
337}
338
339static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL);
340
341static ssize_t wakeup_max_time_show(struct device *dev,
342				struct device_attribute *attr, char *buf)
343{
344	s64 msec = 0;
345	bool enabled = false;
346
347	spin_lock_irq(&dev->power.lock);
348	if (dev->power.wakeup) {
349		msec = ktime_to_ms(dev->power.wakeup->max_time);
350		enabled = true;
351	}
352	spin_unlock_irq(&dev->power.lock);
353	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
354}
355
356static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL);
357
358static ssize_t wakeup_last_time_show(struct device *dev,
359				struct device_attribute *attr, char *buf)
360{
361	s64 msec = 0;
362	bool enabled = false;
363
364	spin_lock_irq(&dev->power.lock);
365	if (dev->power.wakeup) {
366		msec = ktime_to_ms(dev->power.wakeup->last_time);
367		enabled = true;
368	}
369	spin_unlock_irq(&dev->power.lock);
370	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
371}
372
373static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL);
374#endif /* CONFIG_PM_SLEEP */
375
376#ifdef CONFIG_PM_ADVANCED_DEBUG
377#ifdef CONFIG_PM_RUNTIME
378
379static ssize_t rtpm_usagecount_show(struct device *dev,
380				    struct device_attribute *attr, char *buf)
381{
382	return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count));
383}
384
385static ssize_t rtpm_children_show(struct device *dev,
386				  struct device_attribute *attr, char *buf)
387{
388	return sprintf(buf, "%d\n", dev->power.ignore_children ?
389		0 : atomic_read(&dev->power.child_count));
390}
391
392static ssize_t rtpm_enabled_show(struct device *dev,
393				 struct device_attribute *attr, char *buf)
394{
395	if ((dev->power.disable_depth) && (dev->power.runtime_auto == false))
396		return sprintf(buf, "disabled & forbidden\n");
397	else if (dev->power.disable_depth)
398		return sprintf(buf, "disabled\n");
399	else if (dev->power.runtime_auto == false)
400		return sprintf(buf, "forbidden\n");
401	return sprintf(buf, "enabled\n");
402}
403
404static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
405static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
406static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
407
408#endif
409
410static ssize_t async_show(struct device *dev, struct device_attribute *attr,
411			  char *buf)
412{
413	return sprintf(buf, "%s\n",
414			device_async_suspend_enabled(dev) ? enabled : disabled);
415}
416
417static ssize_t async_store(struct device *dev, struct device_attribute *attr,
418			   const char *buf, size_t n)
419{
420	char *cp;
421	int len = n;
422
423	cp = memchr(buf, '\n', n);
424	if (cp)
425		len = cp - buf;
426	if (len == sizeof enabled - 1 && strncmp(buf, enabled, len) == 0)
427		device_enable_async_suspend(dev);
428	else if (len == sizeof disabled - 1 && strncmp(buf, disabled, len) == 0)
429		device_disable_async_suspend(dev);
430	else
431		return -EINVAL;
432	return n;
433}
434
435static DEVICE_ATTR(async, 0644, async_show, async_store);
436#endif /* CONFIG_PM_ADVANCED_DEBUG */
437
438static struct attribute *power_attrs[] = {
439#ifdef CONFIG_PM_ADVANCED_DEBUG
440#ifdef CONFIG_PM_SLEEP
441	&dev_attr_async.attr,
442#endif
443#ifdef CONFIG_PM_RUNTIME
444	&dev_attr_runtime_status.attr,
445	&dev_attr_runtime_usage.attr,
446	&dev_attr_runtime_active_kids.attr,
447	&dev_attr_runtime_enabled.attr,
448#endif
449#endif /* CONFIG_PM_ADVANCED_DEBUG */
450	NULL,
451};
452static struct attribute_group pm_attr_group = {
453	.name	= power_group_name,
454	.attrs	= power_attrs,
455};
456
457static struct attribute *wakeup_attrs[] = {
458#ifdef CONFIG_PM_SLEEP
459	&dev_attr_wakeup.attr,
460	&dev_attr_wakeup_count.attr,
461	&dev_attr_wakeup_active_count.attr,
462	&dev_attr_wakeup_hit_count.attr,
463	&dev_attr_wakeup_active.attr,
464	&dev_attr_wakeup_total_time_ms.attr,
465	&dev_attr_wakeup_max_time_ms.attr,
466	&dev_attr_wakeup_last_time_ms.attr,
467#endif
468	NULL,
469};
470static struct attribute_group pm_wakeup_attr_group = {
471	.name	= power_group_name,
472	.attrs	= wakeup_attrs,
473};
474
475static struct attribute *runtime_attrs[] = {
476#ifdef CONFIG_PM_RUNTIME
477#ifndef CONFIG_PM_ADVANCED_DEBUG
478	&dev_attr_runtime_status.attr,
479#endif
480	&dev_attr_control.attr,
481	&dev_attr_runtime_suspended_time.attr,
482	&dev_attr_runtime_active_time.attr,
483	&dev_attr_autosuspend_delay_ms.attr,
484#endif /* CONFIG_PM_RUNTIME */
485	NULL,
486};
487static struct attribute_group pm_runtime_attr_group = {
488	.name	= power_group_name,
489	.attrs	= runtime_attrs,
490};
491
492int dpm_sysfs_add(struct device *dev)
493{
494	int rc;
495
496	rc = sysfs_create_group(&dev->kobj, &pm_attr_group);
497	if (rc)
498		return rc;
499
500	if (pm_runtime_callbacks_present(dev)) {
501		rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group);
502		if (rc)
503			goto err_out;
504	}
505
506	if (device_can_wakeup(dev)) {
507		rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
508		if (rc) {
509			if (pm_runtime_callbacks_present(dev))
510				sysfs_unmerge_group(&dev->kobj,
511						    &pm_runtime_attr_group);
512			goto err_out;
513		}
514	}
515	return 0;
516
517 err_out:
518	sysfs_remove_group(&dev->kobj, &pm_attr_group);
519	return rc;
520}
521
522int wakeup_sysfs_add(struct device *dev)
523{
524	return sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
525}
526
527void wakeup_sysfs_remove(struct device *dev)
528{
529	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
530}
531
532void rpm_sysfs_remove(struct device *dev)
533{
534	sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group);
535}
536
537void dpm_sysfs_remove(struct device *dev)
538{
539	rpm_sysfs_remove(dev);
540	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
541	sysfs_remove_group(&dev->kobj, &pm_attr_group);
542}
v3.1
  1/*
  2 * drivers/base/power/sysfs.c - sysfs entries for device PM
  3 */
  4
  5#include <linux/device.h>
  6#include <linux/string.h>
  7#include <linux/pm_runtime.h>
  8#include <linux/atomic.h>
  9#include <linux/jiffies.h>
 10#include "power.h"
 11
 12/*
 13 *	control - Report/change current runtime PM setting of the device
 14 *
 15 *	Runtime power management of a device can be blocked with the help of
 16 *	this attribute.  All devices have one of the following two values for
 17 *	the power/control file:
 18 *
 19 *	 + "auto\n" to allow the device to be power managed at run time;
 20 *	 + "on\n" to prevent the device from being power managed at run time;
 21 *
 22 *	The default for all devices is "auto", which means that devices may be
 23 *	subject to automatic power management, depending on their drivers.
 24 *	Changing this attribute to "on" prevents the driver from power managing
 25 *	the device at run time.  Doing that while the device is suspended causes
 26 *	it to be woken up.
 27 *
 28 *	wakeup - Report/change current wakeup option for device
 29 *
 30 *	Some devices support "wakeup" events, which are hardware signals
 31 *	used to activate devices from suspended or low power states.  Such
 32 *	devices have one of three values for the sysfs power/wakeup file:
 33 *
 34 *	 + "enabled\n" to issue the events;
 35 *	 + "disabled\n" not to do so; or
 36 *	 + "\n" for temporary or permanent inability to issue wakeup.
 37 *
 38 *	(For example, unconfigured USB devices can't issue wakeups.)
 39 *
 40 *	Familiar examples of devices that can issue wakeup events include
 41 *	keyboards and mice (both PS2 and USB styles), power buttons, modems,
 42 *	"Wake-On-LAN" Ethernet links, GPIO lines, and more.  Some events
 43 *	will wake the entire system from a suspend state; others may just
 44 *	wake up the device (if the system as a whole is already active).
 45 *	Some wakeup events use normal IRQ lines; other use special out
 46 *	of band signaling.
 47 *
 48 *	It is the responsibility of device drivers to enable (or disable)
 49 *	wakeup signaling as part of changing device power states, respecting
 50 *	the policy choices provided through the driver model.
 51 *
 52 *	Devices may not be able to generate wakeup events from all power
 53 *	states.  Also, the events may be ignored in some configurations;
 54 *	for example, they might need help from other devices that aren't
 55 *	active, or which may have wakeup disabled.  Some drivers rely on
 56 *	wakeup events internally (unless they are disabled), keeping
 57 *	their hardware in low power modes whenever they're unused.  This
 58 *	saves runtime power, without requiring system-wide sleep states.
 59 *
 60 *	async - Report/change current async suspend setting for the device
 61 *
 62 *	Asynchronous suspend and resume of the device during system-wide power
 63 *	state transitions can be enabled by writing "enabled" to this file.
 64 *	Analogously, if "disabled" is written to this file, the device will be
 65 *	suspended and resumed synchronously.
 66 *
 67 *	All devices have one of the following two values for power/async:
 68 *
 69 *	 + "enabled\n" to permit the asynchronous suspend/resume of the device;
 70 *	 + "disabled\n" to forbid it;
 71 *
 72 *	NOTE: It generally is unsafe to permit the asynchronous suspend/resume
 73 *	of a device unless it is certain that all of the PM dependencies of the
 74 *	device are known to the PM core.  However, for some devices this
 75 *	attribute is set to "enabled" by bus type code or device drivers and in
 76 *	that cases it should be safe to leave the default value.
 77 *
 78 *	autosuspend_delay_ms - Report/change a device's autosuspend_delay value
 79 *
 80 *	Some drivers don't want to carry out a runtime suspend as soon as a
 81 *	device becomes idle; they want it always to remain idle for some period
 82 *	of time before suspending it.  This period is the autosuspend_delay
 83 *	value (expressed in milliseconds) and it can be controlled by the user.
 84 *	If the value is negative then the device will never be runtime
 85 *	suspended.
 86 *
 87 *	NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay
 88 *	value are used only if the driver calls pm_runtime_use_autosuspend().
 89 *
 90 *	wakeup_count - Report the number of wakeup events related to the device
 91 */
 92
 93static const char enabled[] = "enabled";
 94static const char disabled[] = "disabled";
 95
 96const char power_group_name[] = "power";
 97EXPORT_SYMBOL_GPL(power_group_name);
 98
 99#ifdef CONFIG_PM_RUNTIME
100static const char ctrl_auto[] = "auto";
101static const char ctrl_on[] = "on";
102
103static ssize_t control_show(struct device *dev, struct device_attribute *attr,
104			    char *buf)
105{
106	return sprintf(buf, "%s\n",
107				dev->power.runtime_auto ? ctrl_auto : ctrl_on);
108}
109
110static ssize_t control_store(struct device * dev, struct device_attribute *attr,
111			     const char * buf, size_t n)
112{
113	char *cp;
114	int len = n;
115
116	cp = memchr(buf, '\n', n);
117	if (cp)
118		len = cp - buf;
119	device_lock(dev);
120	if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0)
121		pm_runtime_allow(dev);
122	else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0)
123		pm_runtime_forbid(dev);
124	else
125		n = -EINVAL;
126	device_unlock(dev);
127	return n;
128}
129
130static DEVICE_ATTR(control, 0644, control_show, control_store);
131
132static ssize_t rtpm_active_time_show(struct device *dev,
133				struct device_attribute *attr, char *buf)
134{
135	int ret;
136	spin_lock_irq(&dev->power.lock);
137	update_pm_runtime_accounting(dev);
138	ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies));
139	spin_unlock_irq(&dev->power.lock);
140	return ret;
141}
142
143static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL);
144
145static ssize_t rtpm_suspended_time_show(struct device *dev,
146				struct device_attribute *attr, char *buf)
147{
148	int ret;
149	spin_lock_irq(&dev->power.lock);
150	update_pm_runtime_accounting(dev);
151	ret = sprintf(buf, "%i\n",
152		jiffies_to_msecs(dev->power.suspended_jiffies));
153	spin_unlock_irq(&dev->power.lock);
154	return ret;
155}
156
157static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL);
158
159static ssize_t rtpm_status_show(struct device *dev,
160				struct device_attribute *attr, char *buf)
161{
162	const char *p;
163
164	if (dev->power.runtime_error) {
165		p = "error\n";
166	} else if (dev->power.disable_depth) {
167		p = "unsupported\n";
168	} else {
169		switch (dev->power.runtime_status) {
170		case RPM_SUSPENDED:
171			p = "suspended\n";
172			break;
173		case RPM_SUSPENDING:
174			p = "suspending\n";
175			break;
176		case RPM_RESUMING:
177			p = "resuming\n";
178			break;
179		case RPM_ACTIVE:
180			p = "active\n";
181			break;
182		default:
183			return -EIO;
184		}
185	}
186	return sprintf(buf, p);
187}
188
189static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
190
191static ssize_t autosuspend_delay_ms_show(struct device *dev,
192		struct device_attribute *attr, char *buf)
193{
194	if (!dev->power.use_autosuspend)
195		return -EIO;
196	return sprintf(buf, "%d\n", dev->power.autosuspend_delay);
197}
198
199static ssize_t autosuspend_delay_ms_store(struct device *dev,
200		struct device_attribute *attr, const char *buf, size_t n)
201{
202	long delay;
203
204	if (!dev->power.use_autosuspend)
205		return -EIO;
206
207	if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay)
208		return -EINVAL;
209
210	device_lock(dev);
211	pm_runtime_set_autosuspend_delay(dev, delay);
212	device_unlock(dev);
213	return n;
214}
215
216static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
217		autosuspend_delay_ms_store);
218
219#endif /* CONFIG_PM_RUNTIME */
220
221#ifdef CONFIG_PM_SLEEP
222static ssize_t
223wake_show(struct device * dev, struct device_attribute *attr, char * buf)
224{
225	return sprintf(buf, "%s\n", device_can_wakeup(dev)
226		? (device_may_wakeup(dev) ? enabled : disabled)
227		: "");
228}
229
230static ssize_t
231wake_store(struct device * dev, struct device_attribute *attr,
232	const char * buf, size_t n)
233{
234	char *cp;
235	int len = n;
236
237	if (!device_can_wakeup(dev))
238		return -EINVAL;
239
240	cp = memchr(buf, '\n', n);
241	if (cp)
242		len = cp - buf;
243	if (len == sizeof enabled - 1
244			&& strncmp(buf, enabled, sizeof enabled - 1) == 0)
245		device_set_wakeup_enable(dev, 1);
246	else if (len == sizeof disabled - 1
247			&& strncmp(buf, disabled, sizeof disabled - 1) == 0)
248		device_set_wakeup_enable(dev, 0);
249	else
250		return -EINVAL;
251	return n;
252}
253
254static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
255
256static ssize_t wakeup_count_show(struct device *dev,
257				struct device_attribute *attr, char *buf)
258{
259	unsigned long count = 0;
260	bool enabled = false;
261
262	spin_lock_irq(&dev->power.lock);
263	if (dev->power.wakeup) {
264		count = dev->power.wakeup->event_count;
265		enabled = true;
266	}
267	spin_unlock_irq(&dev->power.lock);
268	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
269}
270
271static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
272
273static ssize_t wakeup_active_count_show(struct device *dev,
274				struct device_attribute *attr, char *buf)
275{
276	unsigned long count = 0;
277	bool enabled = false;
278
279	spin_lock_irq(&dev->power.lock);
280	if (dev->power.wakeup) {
281		count = dev->power.wakeup->active_count;
282		enabled = true;
283	}
284	spin_unlock_irq(&dev->power.lock);
285	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
286}
287
288static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL);
289
290static ssize_t wakeup_hit_count_show(struct device *dev,
291				struct device_attribute *attr, char *buf)
292{
293	unsigned long count = 0;
294	bool enabled = false;
295
296	spin_lock_irq(&dev->power.lock);
297	if (dev->power.wakeup) {
298		count = dev->power.wakeup->hit_count;
299		enabled = true;
300	}
301	spin_unlock_irq(&dev->power.lock);
302	return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
303}
304
305static DEVICE_ATTR(wakeup_hit_count, 0444, wakeup_hit_count_show, NULL);
306
307static ssize_t wakeup_active_show(struct device *dev,
308				struct device_attribute *attr, char *buf)
309{
310	unsigned int active = 0;
311	bool enabled = false;
312
313	spin_lock_irq(&dev->power.lock);
314	if (dev->power.wakeup) {
315		active = dev->power.wakeup->active;
316		enabled = true;
317	}
318	spin_unlock_irq(&dev->power.lock);
319	return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n");
320}
321
322static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL);
323
324static ssize_t wakeup_total_time_show(struct device *dev,
325				struct device_attribute *attr, char *buf)
326{
327	s64 msec = 0;
328	bool enabled = false;
329
330	spin_lock_irq(&dev->power.lock);
331	if (dev->power.wakeup) {
332		msec = ktime_to_ms(dev->power.wakeup->total_time);
333		enabled = true;
334	}
335	spin_unlock_irq(&dev->power.lock);
336	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
337}
338
339static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL);
340
341static ssize_t wakeup_max_time_show(struct device *dev,
342				struct device_attribute *attr, char *buf)
343{
344	s64 msec = 0;
345	bool enabled = false;
346
347	spin_lock_irq(&dev->power.lock);
348	if (dev->power.wakeup) {
349		msec = ktime_to_ms(dev->power.wakeup->max_time);
350		enabled = true;
351	}
352	spin_unlock_irq(&dev->power.lock);
353	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
354}
355
356static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL);
357
358static ssize_t wakeup_last_time_show(struct device *dev,
359				struct device_attribute *attr, char *buf)
360{
361	s64 msec = 0;
362	bool enabled = false;
363
364	spin_lock_irq(&dev->power.lock);
365	if (dev->power.wakeup) {
366		msec = ktime_to_ms(dev->power.wakeup->last_time);
367		enabled = true;
368	}
369	spin_unlock_irq(&dev->power.lock);
370	return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
371}
372
373static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL);
374#endif /* CONFIG_PM_SLEEP */
375
376#ifdef CONFIG_PM_ADVANCED_DEBUG
377#ifdef CONFIG_PM_RUNTIME
378
379static ssize_t rtpm_usagecount_show(struct device *dev,
380				    struct device_attribute *attr, char *buf)
381{
382	return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count));
383}
384
385static ssize_t rtpm_children_show(struct device *dev,
386				  struct device_attribute *attr, char *buf)
387{
388	return sprintf(buf, "%d\n", dev->power.ignore_children ?
389		0 : atomic_read(&dev->power.child_count));
390}
391
392static ssize_t rtpm_enabled_show(struct device *dev,
393				 struct device_attribute *attr, char *buf)
394{
395	if ((dev->power.disable_depth) && (dev->power.runtime_auto == false))
396		return sprintf(buf, "disabled & forbidden\n");
397	else if (dev->power.disable_depth)
398		return sprintf(buf, "disabled\n");
399	else if (dev->power.runtime_auto == false)
400		return sprintf(buf, "forbidden\n");
401	return sprintf(buf, "enabled\n");
402}
403
404static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
405static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
406static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
407
408#endif
409
410static ssize_t async_show(struct device *dev, struct device_attribute *attr,
411			  char *buf)
412{
413	return sprintf(buf, "%s\n",
414			device_async_suspend_enabled(dev) ? enabled : disabled);
415}
416
417static ssize_t async_store(struct device *dev, struct device_attribute *attr,
418			   const char *buf, size_t n)
419{
420	char *cp;
421	int len = n;
422
423	cp = memchr(buf, '\n', n);
424	if (cp)
425		len = cp - buf;
426	if (len == sizeof enabled - 1 && strncmp(buf, enabled, len) == 0)
427		device_enable_async_suspend(dev);
428	else if (len == sizeof disabled - 1 && strncmp(buf, disabled, len) == 0)
429		device_disable_async_suspend(dev);
430	else
431		return -EINVAL;
432	return n;
433}
434
435static DEVICE_ATTR(async, 0644, async_show, async_store);
436#endif /* CONFIG_PM_ADVANCED_DEBUG */
437
438static struct attribute *power_attrs[] = {
439#ifdef CONFIG_PM_ADVANCED_DEBUG
440#ifdef CONFIG_PM_SLEEP
441	&dev_attr_async.attr,
442#endif
443#ifdef CONFIG_PM_RUNTIME
444	&dev_attr_runtime_status.attr,
445	&dev_attr_runtime_usage.attr,
446	&dev_attr_runtime_active_kids.attr,
447	&dev_attr_runtime_enabled.attr,
448#endif
449#endif /* CONFIG_PM_ADVANCED_DEBUG */
450	NULL,
451};
452static struct attribute_group pm_attr_group = {
453	.name	= power_group_name,
454	.attrs	= power_attrs,
455};
456
457static struct attribute *wakeup_attrs[] = {
458#ifdef CONFIG_PM_SLEEP
459	&dev_attr_wakeup.attr,
460	&dev_attr_wakeup_count.attr,
461	&dev_attr_wakeup_active_count.attr,
462	&dev_attr_wakeup_hit_count.attr,
463	&dev_attr_wakeup_active.attr,
464	&dev_attr_wakeup_total_time_ms.attr,
465	&dev_attr_wakeup_max_time_ms.attr,
466	&dev_attr_wakeup_last_time_ms.attr,
467#endif
468	NULL,
469};
470static struct attribute_group pm_wakeup_attr_group = {
471	.name	= power_group_name,
472	.attrs	= wakeup_attrs,
473};
474
475static struct attribute *runtime_attrs[] = {
476#ifdef CONFIG_PM_RUNTIME
477#ifndef CONFIG_PM_ADVANCED_DEBUG
478	&dev_attr_runtime_status.attr,
479#endif
480	&dev_attr_control.attr,
481	&dev_attr_runtime_suspended_time.attr,
482	&dev_attr_runtime_active_time.attr,
483	&dev_attr_autosuspend_delay_ms.attr,
484#endif /* CONFIG_PM_RUNTIME */
485	NULL,
486};
487static struct attribute_group pm_runtime_attr_group = {
488	.name	= power_group_name,
489	.attrs	= runtime_attrs,
490};
491
492int dpm_sysfs_add(struct device *dev)
493{
494	int rc;
495
496	rc = sysfs_create_group(&dev->kobj, &pm_attr_group);
497	if (rc)
498		return rc;
499
500	if (pm_runtime_callbacks_present(dev)) {
501		rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group);
502		if (rc)
503			goto err_out;
504	}
505
506	if (device_can_wakeup(dev)) {
507		rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
508		if (rc) {
509			if (pm_runtime_callbacks_present(dev))
510				sysfs_unmerge_group(&dev->kobj,
511						    &pm_runtime_attr_group);
512			goto err_out;
513		}
514	}
515	return 0;
516
517 err_out:
518	sysfs_remove_group(&dev->kobj, &pm_attr_group);
519	return rc;
520}
521
522int wakeup_sysfs_add(struct device *dev)
523{
524	return sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
525}
526
527void wakeup_sysfs_remove(struct device *dev)
528{
529	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
530}
531
532void rpm_sysfs_remove(struct device *dev)
533{
534	sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group);
535}
536
537void dpm_sysfs_remove(struct device *dev)
538{
539	rpm_sysfs_remove(dev);
540	sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
541	sysfs_remove_group(&dev->kobj, &pm_attr_group);
542}